HP Deskjet 9800 error light

Similar Questions

• HP Deskjet 9800: blinking lights on hp 9800

  Help, help.

  I have HP 9800. Can not print anything because all lights are flashing constanlly. reset the printer according to the instructions and the problem continues. I would appreciate any input.

  Download the manual here.

  www.hp.com/ctg/Manual/c00458223.pdf

  Page 126 explains blinking lights to solve problems.

• Fill the cartridges of ink on deskjet 9800. Red light flashing, won't print. Always worked before.

  Your Question: I haven't found new, original HP cartridges for my deskjet 9800 in any store. I so did my ink on deskjet 9800 as I did with success several times in the past. Two red lights keep flashing. It won't print. [Someone suggested that I need a new print head?] What should do? thanx

  The coding strip only should be cleaned if there is a problem - it is very fragile and can be damaged, making the printer inoperable.  There is a post here that describes how do to clean the MICR band, but respect the warnings and don't do it unless necessary.  There is also a post here that shows how to solve one of the problems mishandling can cause.  Do not clean the Strip unless necessary.

  The coding is the band one located just behind the stem of transport semi-claire. It aims to help the print cartridge faithfully keep track of its position as it moves along the stem of transport. Sometimes dust, ink or oil can accumulate on this strip and cause the following problems:

  • Prints "stairs" to the bottom of the left margin of the self-test page.
  • The margins left or right of the self-test are not properly placed.
  • Ink cartridges carriage slams on the left side of the printer.
  • Automatic test double-print or obscured shows the letters.
  • Defects to flow the length of a printed page (portrait orientation), or on the whole page (landscape orientation).
  • Printing stops and the lights of the Control Panel on the printer indicate an error.
  • Gaps appear in the printed text or images.
  • Slow printing

  CAUTION:

  Do not clean the strip of coding for the following symptoms: media pick questions, paper jam tilt, ink cartridge, missing points or rejection white stripes with printing and smeared or streaked black ink.

   

• Error cartridge Deskjet 9800

  DeskJet 9800

  Windows 7 64 bit

  CHUTE on the RIGHT: Pen MISSING status

  I installed a new cartridge HP 96 and the right pen LED starts flashing.  I cleaned the cartridge heads and did a hard reset according to the instructions given on this forum.  I then installed the new cartridge 96 in Deskjet 9800 my mother with no problems.  In his printer, it works fine.  What should I do next?

  Clean the contacts in the printer and the cartridge as indicated in this document (for a different series, but similar technique.)

  If that does not correct the problem then carefully examine the cartridge chute and make sure that the spring x-bias is not dislodged.  If the x-bias spring became dislodged and drilled circuits flex as shown here so the printer will require repairs.  If spring x-bias is dislodged, but did not damage the flex so it could be repaired with epoxy.  Compare the damaged side on the intact side to see how would be held in the spring.

  

• HP Deskjet 9800:9800 Printer Deskjet Driver 64 bit Win10

  Need the latest driver 64 bits for a Deskjet 9800 of former HP printer. Have a 4360 Officejet which is not an option to preview before printing.

  I learned by a tech to get the 9800 driver and install. I did some time ago and it worked.

  I have a new pc now and you want to do this once more.

  I can't download the driver of the 9800, the HP download driver Panel is very confusing and I don't see a driver to download.

  On the old system if I knew where the 9800 drivers can I copy off on a USB stick and install them on the new win10 system?

  Help and thanks

  Sally

  I tried and haven't seen a 9800 driver listed. I made this sevearal times and the third time trying it appeared and I was able to install.

  Thank you!!
  Sally

• HP Deskjet 9800: HP Deskjet 9800 will print on 13 "x 19" paper "

  Hello!

  So I have a HP Deskjet 9800 and am trying to print a picture on 13 "x 19" Epson Ultra Premimum Photo paper luster (rated 241gsm).

  My problem is that my HP Deskjet 9800 will load the paper, but it just sort of pushes and pulls it back before sending the document all the way through without printing anything on this subject. I'm loding paper from the back (as it is too heavy to be loaded in the tray) and have all the correct settings, but I do not know why he refuses to print on paper.

  Thank you

  Sam

  So I finished fixing my problem, and it wasn't something one of you said.

  The problem was that the "width of media sensor" was giving a bad reading for my picture Super B paper and then reject. I turned it off as follows (Windows 7):

  1. go on devices and printers

  2. open your HP printer

  3. Select "adjusting printing options".

  4. go to the "Advanced" tab

  5 then in "Options of the Document" under "Printer features" Unsnap to turn "width of media sensor.

  6. enjoy printing!

• DeskJet 9800: Ink cartridges Deskjet 9800 in Europe

  The supposly European compatible with Deskjet 9800 ink cartridges do not work with my printer.  I read somewhere that experts from HP can do something to change the printer of the United States to EU operating system.  Can someone help me with this?

  Hello

  Please talk with them again to guarantee for INKS, no printer.

  Kind regards.

• HP Deskjet 9800: Location for download the driver for HP Deskjet 9800 real?

  Hi all

  I am looking for old download real drivers for the HP Deskjet 9800 printer. Yes, I know it isn't a W10 driver for that probably. But I can't find the real drivers for this printer in ANY operating system anywhere. When I go to the download page, it seems to be more useless than NY Times from yesterday.

  Can someone point me to an existing file regardless of the newer o/s he had drivers for? I assume that either W7 or W8 would be the likely culprit.

  I pretend that my HP 8600 is the old model because HP, in their infinite wisdom, has decided that we don't have to be able to enter in custom printer paper sizes. Wish that I had known before, I bought the thing. But don't bother to enter another story.

  In February 2014, I used successfully the 9800 drivers to print invitations from my sister's wedding so I know it works. But I can't find the drivers I downloaded there, for some reason; and I reformatted my drive since then. :-(

  Any help will be greatly appreciated.

  Robert

  Hello
  
  Thank you for using the HP Forums.

  Yes, the DJ9800 driver is available at drivers to win 10 IN-OS.

  You can watch this resource or follow these steps:

  Install a driver In-OS

  Follow these steps

  1. click right on the button start (Windows icon) select 'control panel '.

  2. under "Control Panel", select "view devices and printers."

  3. Select "add a printer".

  4. If he finds your printer (you have your printer connect via the USB port on your computer), follow these steps to install the drivers in the OS.  Otherwise, select 'the printer that I want isn't listed' > next

  5. in the next screen, select 'Add a local printer or network printer with manual settings' > next

  6. Select "use an existing port: ' > next»»

  7. Select HP > HP Deskjet 9800 printer (we recommend that you click on "Windows Update" which could make the HP Deskjet 9800 printer (HP) option.  Note that the 'Windows Update' can take up to 10 cantons depending on how quickly your speed at wide band is"

  8. click on 'Next' and follow the remaining steps to install your printer driver.

  On your other query that you mentioned about custom paper size, this resource would show you how to create and use your printer.

  Creating a customized for your printer paper size

  Hope that helps!

• HP Deskjet 9800 does not print

  My HP Deskjet 9800 is not printing.   It was printing fine until I replaced the cartridges.  I tried to implement everything in the manual, etc... and nothing works.  Any help would be greatly apreciated!  I use Windows 8.

  I plugged into the wall and bought the HP cartridges!  It is now printing!  Thanks a lot for your help!  Patricia

• When I log on my computer its is open for a minute and then a blue screen with error lights up and stops him. I can only log in safe mode of network.

  When I log on my computer its is open for a minute and then a blue screen with error lights and him stops

  I can only log in safe mode of network.

  original title: blue screen error

  If you can properly connect mode without failure, you can use "msconfig" to toggle various programs that load at startup.  Finally, find the one that is causing your program to crash.

  "How to solve configuration errors by using the System Configuration utility in Windows XP"
    <>http://support.Microsoft.com/kb/310560 >

  "System Configuration Utility overview"
    <>http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/msconfig_usage.mspx?mfr=true>

  HTH,
  JW

• DeskJet 9800 stops halwfay

  Kind regards!

  It's frustrating that there is no real solution from HP for the same problem (the same problem in many models). I use a deskjet 9800, win8.1pro 64-bit. The main use of this printer is for the DAO, and every time that you try to draw a map, simply stops at Midway and remains frozen for about 2 minutes and ejects the paper. In those two minutes the printer assumes that work s

  I tried to reinstall the printer several times, make some adjustments to the configuration of the printer, installed in another computer, but everything seems unnecessary. Moreover, isn't it funny that in the official website of hp, the driver is not available.

  Any help will be appreciated

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=438326&swItemId=dj_128044_1&swEnvOid=4158

  Hello! INTROVERT.

  Thanks for your quick response. I did what you told me, and unfortunately at the beginning the problem continues. As my last option, I also changed the original USB cable for a new and connect the printer to a different port USB (3.0).

  After doing all the steps, finally the printer started to work properly. I really don't know not which of the steps (software or hardware) solved the problem, but actually runs well.

  Note: I'll do the same thing on my hp Desingjet70, hoping that it works also (the same problem with that one).

  Once again, thank you for your cooperation.

• With no paper in the tray, the printer has no error light. As soon thre is paper in the printer, I get error lights.

  Original title: what a printer problem.

  When no paper in the tray, my HP PSC 1400 no flash no lights error, however when the cartridge is mounted on the inside, it flashes error lights. As a result, I can't take a printout and I feel buried in the huge pile of unfinished work. The window so that HP behave as if they have nothing to do with it or the problem is bigger than their power; Well, I don't have to go, but to spread my shirt in front of you as if I'm begging!

  Contact HP support or post in the forums.
  What is your shirt has to do with it?

• Having problems installing of software and drivers for HP Deskjet 9800

  I uninstalled my HP Deskjet 9800 because I have too many problems with it. I use Windows XP.  I went to hp.com and download the software and drivers for this printer. The software and drivers simply go to my folder of the downloaded files. How can I install this software for my printer work? Any help would be greatly appreciated. Thank you, Patricia

  The downloaded file is a .zip or .exe.  Go to your download folder (right click on start > explore, click the Folders icon and navigate to your folder) and then double-click the downloaded file.

  If it is a .zip file, it will create a folder.  Inside this folder is going to be a setup.exe file - double click on it.

  If it's a .exe file, double-clicking on it to launch the installer.

• How to print on both sides of the paper with deskjet 9800

  Hello

  I'm trying to print on both sides of the paper.  I have a deskjet 9800.  I select two sided, but it will print one page after another.  Even pages are 'upside down '.

  Would appreciate help with this.

  Hello

  I think that it is an old printer and it MUST have a duplex unit to be able to print both side automatically if yu have to print manually (turn inside papers yourself):

  http://h20565.www2.HP.com/portal/site/hpsc/template.page/public/KB/docDisplay?docid=c00283626&AC.admitted=1414613820848.876444892.492883150

  Kind regards.

• Double-sided Patch Vista - DeskJet 9800

  Some models of printer with automatic duplexer print incorrectly on the back in Vista.  In these models on the back is printed updside down regardless of the driver configuration.

  The attached zip file has a patch and instructions to fix this problem for Deskjet 9800 printers.

  Patches for other models can be found here.

  This patch has been tested good, with more than 150 copies of this fix distributed by e-mail since April 2007.

  The zip file contains two files:

  DJ9800.PDF contains detailed instructions for applying the correction.  Opening this file requires Adobe Reader or a similar pdf viewer, available for free download.

  hpw9800t. GPD is the current patch file.

  To apply the hotfix, download the attached zip here.  Extract the files in the %Temp% directory, and then open the DJ9800.pdf file and follow the instructions.

  Placeholder for future updates.