HP deskjet all-in-one 3632: problems to make eprint to work

Similar Questions

• HP Deskjet All In One 2540: problems scanning

  When I on my printer each time it prints a test page. I think normally it's supposed to only do when I change the ink. How can I stop this?   thnx

  drakster, after the validation, I used the software to scan my printer for questions, hp ttrobleshooting did not any.today when I turned on the printer, everything was fine. go figure.

• HP Deskjet All in one printer model F4280

  I am running VISTA 32 bit OS, and I have a HP Deskjet all in one printer model F4280. After having updated the software and the drivers from the HP website. Printer is on and I connected all the cables ensuring that all are in good working condition.

  I plug the printer by USB connection in my laptop and everytime I try to print anything from any program, including internet explorer 9, he brings just a notice saying ' Explorer crashed and stops.

  Can someone help me?

   

  Hello

  1. What is the exact error message?

  2 have had any changes made to the computer before the show?

  Please follow the steps in the link.

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

• Photo Gallery is ID not a scanning device (HP Deskjet all-in-one).

  Photo Gallery is ID not a scanning device (HP Deskjet all-in-one).  Always before A.
  Under Vista, updated on an HP laptop.
  Already checked for printer is installed and works properly and for updates of device driver and the computer restarted.
  Help?

  But... not the same question... the next Document in HP
  maybe worth a visit:

  HP printers - Scan button on the
  Printer does not work properly when
  the printer is connected to a Windows
  Vista computer
  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c00809848&LC=en&cc=us&DLC=en&product=303756&rule=23585

  You may be able to find additional documents to the service the customer of HP:
  http://h10025.www1.HP.com/ewfrf/wc/siteHome?cc=us&LC=en and... It may be interesting to try to uninstall/reinstall the drivers of all-in-One.

  Also... If it is a recent issue, it may be interesting to try to make a system
  Restoration of some time before he started.

  Windows Vista - system restore: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  Good luck...

• HP Deskjet All in One 3545: printing problems

  1 shows low ink icon. A left less, just half. Thought b & w cartridge is low. Ordered and this has changed. Print an alignment page. During the printing of new document, new alignment message came. Returned and gave the print order. Print a faint fary. Check the ink level. Right and left less. Stop printing. What needs to be done?

  2. when the printer is on, sound of NEEQ move is not smooth, little stumble.

  3. If put more than one paper in the tray, all are drawn in and then deported without no printing. Even place a paper displays the message that says to remove the paper and place it again in the status bar.

  4 visit to a mechanic charges are prohibitive.

  5. help online?

  6 resets useful?

  7 printer is in mode (wi - fi) network

  Hey @Achyut18,

  I understand that you have some problems with the printing of your Deskjet Ink Advantage 3545 e-all-in-one printer. I can help you with that.

  To start, make sure that the printer is plugged directly into a wall outlet , not a surge protector. Once it's done this document describes How to solve print quality problems with your printer. If after completing the document, you still have problems with print quality, then the cartridge will need to be replaced. Please find below the link to contact HP support.

  It seems that you may have had a problem with collection of paper in the printer. This document explains How to solve problems of choice. If after completing this coument you are still experiencing problems with pulling on the paper then the printer will need to be replaced. Please find below the link to contact HP support.

  If you are looking for other support options, from real cartridges not refilled to replace, or if the printer needs to be replaced so you can contact HP support directly by clicking here and filling out the form below.

  I hope this helps with your problems and I hope you have a great week!

  If this solves your problem then please help others to find this post by clicking on accept as Solution on my post.

  If you appreciate my help so please let others know by clicking on the icon below my post thumbs up.

• HP DeskJet Ink Advantaje 4535: HP DeskJet All in One-4535 driver problem

  Hello, I do not know if this has been posted before, if it were, I'm sorry.

  I recently bought a printer from a store in my country, HP all in one ink advantage 4535. The box came with a small cd with software (4530 all in one set), but I use a macbook air with no CD is useless. I could not find the driver for this printer anywhere on the web or on your site. Can you help me please?

  Hi Routzi,

  Here is a LINK from hp.com for drivers and software for your Mac.

  Let me know if this solves your problem!

  Thank you

• DeskJet 3050 all in one connection problems

  I have a 3050 all in one deskjet, I can't keep it connected to the computer, I have reinstalled several times, but I I can never find it on the computer

  Hello

  Please specify your operating system.

  In addition, you use the device with a USB connection or via the network?

• DeskJet 2544: 2544 HP Deskjet all in one printer series No. CN4172BO1M

  Hi, I have a problem with my HP Deskjet 2544 printer all-in-one [personal information deleted], I experience a gray line through the text the two lines that makes text blurry and difficult to read.

  I cleaned and aligned the print heads, changed for a better print quality that has helped a little, but the line is still in the text, can you please advise.

  Hi @oldfeller1,

  Thanks for joining the Forums of HP Support for a solution to your printing problem.

  I understand that you are using an all-in-one printer HP Deskjet 2544 with a Windows Vista PC and printed text is blurry and difficult to read because of the grey lines through all the lines of the text of couple. I would like to help with that.

  Here is the document of support designed to be used with this type of problem - fixing poor print quality.

  Please let me know if that solves the problem, or if you need assistance.

• 3636 Deskjet all-in-One: ink cartridge is Deskjet 3636 configuration necessary?

  The black cartridge for installation provided with my printer all-in-one Deskjet 3636 recently bought is defective. My printer does not recognize the cartridge. I followed all the troubleshooting steps, including turning on/off the printer and the cleaning cartridge, however, nothing works. What the configuration required to install cartridge? The color cartridge is recognized and the printer is connected wireless. The only issue I'm having is the black cartridge. Could I buy a regular black ink cartridge and use it for the first impression?

  Yes, you must use cartridges for initial Setup configuration and operation of the printer. The best way to solve this problem is to put the printer in return for Exchange.

• HP deskjet all-in-one 2540: recording of the scan

  The number of regulatory product is SNPRB-1204-02

  This problem has developed since yesterday.  When I scan a whole page, although the entire page shows, a part of the page shows this option is selected, but I've made the selection.  If I deselect the part or not, only the selected portion is recorded.   I used Dr. printer-scanner, that is no problem.  I couldn't find anything in the FAQ or the forum to address this issue.  I don't remember the exact date of purchase but I think it's less than a year.  Software help?

  Hello

  Before you uninstall the software I highly suggest to check the scan settings in the HP software.

  If you select this option to scan an image Auto-cropping function is likely to be shortlisted and so the analysis may get cropped.

  Please try, follow these steps and tell em that rather those who can solve the problem or not:

  http://support.HP.com/us-en/product/HP-DeskJet-2540-all-in-one-printer/5295960/model/5295961/document/c03941429

  Shlomi

• DESKJET ALL-IN-ONE 2540: HP DESKJET ALL-IN-ONE 2540

  Just installed HP DESKJET 2540 ALL-IN-ONE.  Wireless printing for iPad works great, but PC Dell, print quality a part of the printed text only demi-imprime throughout all documents.  I tried to clean the cartridges, printer, align the cartridges and go through all these steps.  Even the printed sheet of alignment has the lines of half-print on the page.

  Hello @Oregon_Peeps,

  Welcome to the Forums of HP Support!

  I understand that you have a print quality problem when you print your Windows 7 computer to the all-in-one printer HP Deskjet 2540 and autonomous. I would like to help you to solve this problem today. What is unusual is that the autonomous alignment report shows failure to print quality with half-print lines, but when you print from your iPad everything looks great. Because the default occurs on the report of alignment that the problem you encounter is hardware related. Thank you for all the troubleshooting steps you have already finished before joining the Forums of HP's Support. At this point, I'll make go you through some additional troubleshooting steps.

  Please click here to access the print quality troubleshooting procedure. When the support document opens do execute Solution a, Solution three, and five, and six and seven. This includes all sub-steps under the listed Solutions. Pay close attention to manually clean the ink nozzles. In addition, yor need to run up to 3 clean your print head. If you have already run several cleaning please do not operate everything cleans more than ink is used to clean the printing system and we do not want to waste the ink more.

  Once the troubleshooting completed, test please print again.

  • If the problem persists, the alignment success or failure on your machine?

  Please reply to this message with the result of your troubleshooting. Good luck!

• HP deskjet all-in-one 2545: Troubleshooting Wireless direct with HP2545 with printer all in one

  I want to use my printer wirelessly without router (via direct wireless), but there is no work, or he always says this printer is offline every time when I was trying to make my the HP2545 while one use by direct wireless.  IAM using a pc with windows 7 64 bit I have installed the latest software for 2545 all-in-one of the net to the PC already, connected via USB and in this case printed successfully. (it also works through classic wireless)   The printer appears as a device with wireless on the PC and I can log in, however, (with unplugged USB) when Iam printing, the printer shows as offline and work never reached the printer. But if I plug in the USB cable it will print. I already found in the bottom right corner my SSID of my printer, put the correct password and it writes me that priter is already connected but nevertheless the printer does not work, is always offline... I tried all the known methods (in classic seting place... by start-> all programs-> HP-> HP deskjet 2545 series-> setting up the printer and the software and tried to convert the USB to connect wireless) , but without any positive result... what iam doing wrong? why it does not work on my pc via direct wireless table? on my second laptop it I have win 7 32 bit and everything works great also through the direct wireless... it's very strange... Why this function works on my laptop but on my table pc not despite the fact that connected the printer in the lower right corner...

  Although no one responded to my problem, thank you when, I already solve the problem! It was such a success s bull and I didn't know... I had only just connected and linked to my home PC, my network card with my wireless card with the network address and ola which was the cause which has blocked my direct function wireless printer, now everything works well,!

• Software for 2540 all-in-one installation problem

  Try to install the s/w for the all in one 2540 on an asus laptop running windows 8.1 64 bit. I get the error message c:\program 5 HP HP desk jet 2540 series\driverstore\yeti\hpvyt11.tnf install a driver package caller must be a member of the management group to install a driver package. As I am the only user on the laptop the full administrator rights so I do not understand what is happening

  Hi @Fish66,

  Welcome to the HP Forums!

  I see that you have a problem installing the software for your HP Deskjet 2540 on your Windows 8.1. I'm happy to help with this installation problem!

  To get help, I'll have to know the following:

  • If the printer is connected, wireless, or USB.
  • If the printer is able to make copies. Copy the text or mixed Documents.

  In the meantime, try the following:

  • Uninstall the software. Uninstalling the printer software. (In case it has been partially installed).
  • Clean boot the computer. How to perform a boot in Windows.
  • Re-install with the HP printer install wizard for Windows.

  Hope this helps, and hope to hear from you soon!

• The HP Deskjet all in one printer/scanner has no control on the printer, then how to scan?

  I can print wireless from my iPad to my printer/scanner HP Deskjet 2540, but cannot see how to scan from the email on my iPad unit. Is it possible to download the control panel scanner/copier on my iPad?

  Hello

  You can scan using the HP all-in-One Remote app, available for the App Store.

  You can find a step by step instructions below:

  http://support.HP.com/us-en/document/c02486319/

  Shlomi

• HP Officejet 6700: HP Officejet 6700 Premium all in one network problems

  Printer = printer HP e-all-in-one Officejet 6700 Premium
  Model = H711n
  Number of product = CN538A
  Firmware version = MPM5CN1450AR
  Location = Ireland
  Printed pages total: 152
  Scanned pages: 58

  Other details available on request...

  I've had this printer for several months now, I have had no problem connecting to my wireless network and connect computers, telephones and other equipment to this.

  A few days earlier, when starting the printer display flashes with the useless error message, error in the printer, turn the printer off and back on.

  I have power cycled as requested and received the same message, over the power of the cycle he mentions turning off the power button and no DISCONNECT of the sector. Until then I had never disconnected from the sector. After that I have several attempts to power cycle the printer is off and removed the sector, has waited half an hour and powered on again once.

  Still stuck in a loop. He also briefly flashed a blue screen with the error B81431CB. So brief that it is almost useless. I had the boot sequence video and pause playback to read error!

  After some research, I decided that she was experiencing problems connecting to the WIFI network. So, I turned the wifi on the router and the printer network started as usual. Internal menus are now available and I can print status and so forth, so at this point I can exclude defects of ink or mechanism.

  I went in on the printer network settings and reset the network. I'll also through the printer to factory default settings. I have reactivated the WIFI network to the router then went to install the printer again. Digitized for wifi networks and found mine. Entered the password for wifi and the printer could not connect. Everything is good, correct ssid, signal. Report shows wifi password is incorrect.

  I have try several times to connect wifi password is certainly correct, but the printer refuses to recognize the correct password. I tried a different router, the same result. Says incorrect password. Also I tried WPS and a PIN, said still fails to connect.

  At this point, I have disabled all security on the wifi network. Bingo, printer connects to the network, but starts with the loop of error mentioned at the start of the tour and turn it back on. This above has been tried several times, the factory reset, everything ok, turn off the wifi security, the printer connects and goes in a loop.

  So, at this point wifi is confirmed to be defective. I decide to directly connect a LAN cable. Once the LAN cable is connected, a few seconds later the printer detects the network and goes back into its loop error. It will not just connect to a network via wifi or LAN. He previously worked on the network, and nothing has changed on the network, not new parameters or no new devices.

  I connected a laptop to the printer via USB and that seems to work ok, but a USB connection is not ideal and defeated the convenience of a wireless printer. I also tried to reflash the printer in case there is a corruption of the firmware, but the utility detects that the latest firmware is installed and that it is not engaged.

  Now...?

  OK I managed to make it work and I will try to explain the steps of my best.

  As mentioned previously, I tried another router, I tried the wiring, and I tried to reset the router and the printer. Nothing seemed to work.

  Out of curiosity I just put my phone in a WIFI AP. Tried connecting the printer and it worked. The printer connected to the WIFI phones.

  So I know that the printer works on at least one access point.

  Thus, in the settings of the router and firewall. The only thing enabled in the firewall have been

  IPv4 firewall protection