HP Deskjet D1320 align the print cartridges fail

Hello

So I recently broke my printer to work on a couple projects.  The old cartridges is dead, so I bought brand new and installed today.  When installing the latest software of HP printer, the alignment will fail.  Step by step:

(1) Center of Solutions HP Open

(2) open Toolbox

(3) device Services tab

(4) align the ink cartridges

(5) align the

However, after click on align, * nothing *.  It's as if the part of the alignment of the software was not installed.  I * can print * very well, but alignment doesn't matter.   I can also print a page of test very well.

I also did the standard troubleshooting: remove and reinstall the cartridges, restart the printer, unplug the printer, reinstall the software.  * Nothing works.* again, it is as if the part of the alignment of the software was not installed.

So what can I do to solve the problem of alignment?

Thank you

Drogan

PS OS: Windows 7 Ultimate 64 bit SP1.  Connection: USB

You are right.  It's a good general practice to align the printer when new cartridges are installed, but it is not mandatory.  Alignment is made for purposes of printing quality.  On this printer, the print head is part of the ink cartridge.  When a new cartridge is seated, it may or may not be in alignment.  It looks like your cartridges are in alignment.

You could try to shut down your computer (not a reset) and do a Hard Reset of the printer as described in the following link.  Click here  After you restart the computer, is there a difference?

If not, and the print quality is good, I recommend you skip the alignment.  If you want to be able to make an adjustment, you could try to do a complete uninstall of the printer software and download and install the drivers from hp.com.  Click here

Tags: HP Printers

Similar Questions

  • Aligning the print cartridge HP PSC 1500 series printer

    I just installed a new ink cartridge and try to align. When I open the HP PSC 1500 Setup page, it gives me the option "align cartridge". When I click on it it opens a dialog box titled 'printer properties '. There is no information on how to align the cartridge.

    Thanks for your reply. It didn't really solve my problem. As I've mentioned before, I tried to get the 'how' info from the HP PSC 1500 series control page that displays a link to "aligning the print cartridge. By clicking on this link opens a dialog box that has nothing to do with the alignment of the cartridges. It was not very useful, but eventually, I remembered what I had to do was insert the alignment sheet and press "scan."

  • Aligning the print cartridge HP Photosmart C7280 Print failed - prints in everything but black

    When I print, it comes out in pink/red.

    I bought all new ink cartridges and done a master reset and I still get the error that does not have the print cartridge alignment.

    Hello

    Please try the step and then try alignment process listed below.

    on the screen of the printer.

    1. Press the key SETUP (key), then
    2. Then press TOOLS,
    3. Press the CLEAN print head / cartridge.

    Make sure that the ink cartridges should be at least 25% full.

    Note: you need to repeat the above steps 2 - 3 times.

    If issue still persits, it could be a defective black cartridge or print head. In which case you could call the HP Technical Support for assistance.

    If you are in the United States, the toll free # is 1-800-474-6836.

    If you're not in the United States, and then connect to www.hp.com , bottom left it is an icon of the world map, click it and then select the region that you belong to, which would then provide the support options for you for this region.

  • Aligning the print cartridges

    Range of printers all in one HP PSC 1315

    Since receiving Microsoft updates, my computer is no longer offers me HP programs e.g. HP Director, through which I used to do analysis. I can scan with the Microsoft program, so that no problem, but when I change an ink cartridge on the HP, a color alignment page is printed automatically but seems I do not have access to the program that checks the alignment after that I have place the alignment page of color on the plate of the printer. As I am unable to perform this alignment, the printer now prints another page of alignment of color whenever I turn it on.
    How can I make the alignment, or failing that, stop the printer to automatically print a color alignment page whenever I turn it on?
    I can't reload the driver programs or other software that I got when I bought the printer, as they were on diskette, and computers do not have floppy drive.
    Troubleshooting: I checked the control panel for the printer settings.

    Hello

    Thank you very much, it worked.

    This is my first post (second if you include my original request, so don't know not how I "say 'Thank you' by clicking on the star of congratulations in the post who you helped." and "mark the post that solves your problem as"acceptable Solution"", but considered it.)

    Kind regards

    Maurice Wilkinson

  • Aligning the print cartridge Deskjet 950C

    Someone knows how can I align my cartridges under Windows 7 64-bit?

    Yes, the ALIGNMENT/CALIBRATION is the same. You can do this step and get the same results as the cleaning of the print head.

  • aligning the print cartridge printer failed

    How can I fix my printer cartridge alignment?

    Communicate with the support of the manufacturer of the printer.

  • aligning the print cartridge has failed!

    I have a HP Officejet J5780 all-in-one printer.  It was working fine until I ordered new cartridges on the HP store online alternatives.  When it came to replace them and use them, I started to struggle to align the cartridges.

    The error message I get little matter I try is the following:

    ERROR: Align Page not detected!

    I have repeatedly tried over and over again... now I can't print anything.  Only, I had this printer a year and rarely use it!

    Thanks, I've been subject to shoot than the little hair that I had remaining. The screen told me to replace the color cartridge, so I did and then it would not recognize the paper from swipe. I replaced the black cartridge and then no problems.

    Thank you thank you thank you

  • Aligning the print cartridge

    I downloaded the software, but now the alignment of cartridges has failed. Did I show concern and if so how to fix it. Thank you

    Thanks for getting back to me with the information. Please click on the link to get the troubleshooting document.  http://support.HP.com/us-en/document/c00806164

    If you need more help, please let me know.

  • printing with printer deskjet 2050 using the black cartridge only

    printing with printer deskjet 2050 using the black cartridge only

    all solutions? PLIs answer me. thanx

    Hi d33com,

    Follow the steps below to set the black ink only.

    1. open the printing preferences (step 1)

    2. click on the Advanced button (step 2)

    3. click on the drop down arrow next to the print in grayscale to change black ink only.

  • OfficeJet 4620: Officejet 4620 2 colorful money of the tension springs located behind the printer cartridges

    I really need help.  I need a picture of the 2 springs of voltage silver located behind the printers in the printer cartridges.  I followed most of the instructions to clean the print heads available on this forum, but has failed to take a picture of them so I do not know where to install the.  I would really appreciate a photo.  Help.

    PORF kindly sent a picture to me and I was able to go back to the printer.  I took a photo to someone else who failed to take a picture while following the instructions on the following post: http://h30434.www3.hp.com/t5/Inkjet-Printing/My-Officejet-4620-will-not-print-the-black-ink/td-p/2235905

  • Replace the print cartridge 8600

    I am trying to replace the black ink cartridge.  When I open the door on the front of the printer, nothing happens.  The printer cartridge door does not move and is inaccessible.  The printer seems to be on.  The green light is fading power on and off.

    Hello saratoga1,

    Thanks for the reply!

    I'm glad to hear that you solved the problem with a reset of the power (in the above troubleshooting guide Solution). Please select "Accept as Solution" 2 Message above for other members of the community can find our thread to see the appropriate link to solve this problem.

    Thank you!

  • Windows cannot connect to the printer operation failed with error 0x0000007e

    Hello

    OS: Windows 7 x 86 SP1

    Print server: Windows Server 2003 R2 SP2 x 86

    Printer: HP LaserJet 8150 printer shared and listed in the directory

    Problem:

    When I try to install the printer in the Add Printer Wizard, choose install a network printer, she finds a driver on the server, installs, then brings up an error (see topic).

    In the Print Service logs, I see the following:

    "The print spooler failed to load a plug-in module, 0x7e error code. See the user context information for event data.

    I can install the printer very well if I choose local printer, new port, TCP/IP, and enter the IP address. This isn't a solution, as users cannot be expected to go through this process, or for me to go around all the machines and do it manually. More I want than the print jobs to the print server's spool, and I think that the local installation method uses the local spooler.

    I tried to install the driver of HP UPD PCL 6, x 86 and x 64, on the print server.

    When I check what the client machine pilot chose to install by going to the properties of the print server, I can see that he chooses the former driver "HP LaserJet 8150 Series PCL 6". I presume that it is incompatible with Windows 7, that's why I am getting the error cannot connect.

    How can I get Windows 7 clients to use the UPD?

    I left our Windows 2003 print server to a Server 2008 and comes to install the HP UPD x 86 and x 64 for each printer. Now everything works perfectly! All XP and 7 customers can install printers network without problem.

    I suspect that the problem was due to have many different versions of drivers on the old print server, and customers did not know which to use?

  • Error printer mechanism: the print cartridge cradle cannot move

    HP Officejet Pro 8500 has 910g

    The printer will not print: the message is: error printer mechanism: the print cartridge cradle cannot move.  Without the cradle of the cartridge and press ok.

    How free the cradle of the cartridge?  I sent a message to 13:30 and I got a notice that they will contact me within the hour, he is now almost 19:00 and nobody sent me back.  Help

    Try the steps in this troubleshooting page.

  • print size too large after changing the print cartridge

    Sounds like an easy fix should be up there, but I'm not super computer savvy... after that we changed the print cartridge for the first time with this printer (and who knows what may happen after when my husband tried to fix it), the font of printing is too large AND prints a blank page of paper before the actual page prints with a font that is too large to fit properly on paper 8.5 x 11 inches. Normally, there are all the parameters that must be set after simply change an ink cartridge? Help!

    Hi Wendy,.

    You can also check: http://h10025.www1.hp.com/ewfrf/wc/manualCategory?lc=en&dlc=en&cc=au&lang=en&product=4089468&

    I hope this helps.

  • 4380 all-in-one printer does not detect the print cartridge

    My all-in-one printer (model 4380 vivera, bought in Switzerland) does not detect the print cartridges. I traded the color cartridge with that of another, older than I was and now everything is fine. I don't know when, this problem will arise again. The last time I was so frustrated that I bought another printer (HP 2050) which seems to work without problems. I have unplugged, replugged and clean the cartridges with filtered water. The problem may arise at any time. Help, please. Thank you.

    I'm sorry you have a problem with your ink not detected.

    The problem may be because the printer is of the Switzerland and the ink cartridges are NOT. The printer will only accept cartridges of the same region/country.

    For example, if you are in the United States and buy a printer and the cartridges come from GERMANY, he cannot read. Will suit most, but some of the contacts are different causing not well read the cartridge from the printer.

Maybe you are looking for

  • Meine small werden nicht mehr loading

    Windows 7 / 18 Firfox Die Untermenues bei der Menueleiste werden nicht mehr displaying.IM abgesicherten Modus works dies, d.h. ein Plugin scheint das problem zu breast.Ein einezlnes Deaktivieren der Addons hat nichts gebracht.

  • Analog input problems using PXI-6232

    I tried to solve this problem for a while now without a bit of luck. Solution suggestions are welcome. I use a PXI-6232 with LabView 8.5.1 to accept signals analog several of my sensors. Based on the signals as a PWM signal is generated and the outpu

  • FLAC do not copy

    I'm sure this has been answered before, but I did some quick research and didn't find anything that I could say has answered my question. According to the documentation the "rocket" supports the FLAC. I have a bunch of files FLAC I created myself fro

  • The user interface related problem: cannot add the status buttons

    Hello I'm developing a screen where I need the header and status with controls like buttons and the EditFields. Please take a look at this code editField = new EditField(); updateButton = new ButtonField("Update"); cancelButton = new ButtonField("Can

  • Cannot download Windows 7 Home premium 64-bit

    I bought Windows 7 Home premium 64-bit, it's several days and unable to get the ISO downloaded from Digitalriver link they sent me. I receive an error message 404 indicating the page or file could not be found. How can I get this downloaded ISO? I ne