HP deskjet f2430

Similar Questions

• DeskJet F2430: Deskjet F2430 fire attention of light, do not print

  DeskJet F2430 will not print. I try and print, it will take the sheet of paper (just plain white paper) to halfway through, stops and flashes the attention. If I close the power button then turn it back on paper will end in scrolls of power, but the attention light continues to blink.  I followed the troubleshooting guide.

  1. I tried to replace both cartridges (both are HP)

  2. checked for all paper, large or small and do not see.

  3 - I turned off the printer and checked that the cart moved freely left and right easily.

  4 - reloaded the drivers for the HP printer.

  5 - the printer c upwards when you turn it on. The print job shows he's waiting

  Any help would be grately apprecaited

  The question endded by material being, as far as I could tell. I could not be without a printer more so I bought a new printer Cannon. We'll see if it last longer then the last 3 HP I had.

• DeskJet F2430: Printing from the Internet has stopped working

  My printer worked for several years until now.  I have a Deskjet F2430 all-in-one. When I search for updates, it says that the driver, etc are up to date.  I still can not print a document on the computer, but cannot print anything on the web. A block appears generally who says that the error is unknown, but the script on the page has stopped working (not sure of the wording).

  aurielle

  You are welcome.

  Solutions come in different flavors.

  While Firefox is my own browser of choice for several reasons, I understand that everyone wants change browsers just to print a document.  The smile.  On the other hand, I find myself using Internet Explorer on occasion when Firefox is stubborn on a particular issue - sometimes just adapt to the situation.

  There should be a permanent solution for IE - can - be another Expert or someone else will chime.

  If I find something useful, I'll post.

  Good impression!

  Click on the Thumbs - Up Kudos to show that you appreciate the help.

  Click on accept as Solution when the answer provides a fix or a workaround!

  I am happy to provide assistance on behalf of HP. I do not work for HP.

• DeskJet F2430 will not scan

  I have a Deskjet F2430 Printer/Scanner and uses Windows XP.  When I try to scan I get the message: "a required software component cannot be found or has been incorrectly installed.  Reinstall the software that came with the device.  I tried everything, unplug the unit and reconnected, unistalling and installation, disabling the virus, changed USB... nothing works.  The doctor of printing & scanning HP says everything is fine, but I still get the same message.  Help please.

  To start sounds like it is a driver problem. I want to start to be sure that deleting the software and relocation happened in the best way possible. I want you to follow my steps, I can be sure that we start both on the same page.

  First of all, if you use a USB cable, be sure to remove it (it's important). Do not plug it in again until the software instructs you. Then, go to printers and faxes, programs and features and issues Device Manager and make sure that all copies, files, and programs related to the printer are removed. As indicated, and then restart the computer.

  In the menu START menu type "%temp%" and press ENTER. Here, I want you to press Ctrl + A, and press DELETE. Some files you cannot delete them, ignore these files and delete the majority that allows it to.

  find and install SOFTWARE to FEATURE FULL if it is available:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&LC=en&DLC=en&product=3964426

  Install and let me know the result!

  Have a great day!

  -Spencer

• HP Deskjet F2430: Printer printing too small

  My operating system is Windows 10.  I'm not sure about the size of the bit.  My HP Deskjet F2430 is too small Word printing online.  I checked the font size & it is set correctly, but the impression is so small that it is barely readable.  Thanks for your help.

  Welcome to the community of HP @yellowrose22052,

  I read your questions about printing HP Deskjet F2430 too small Word online. I will certainly do my best to help you, however, I would ask that you please let me know some more useful information to help me the problem of the search for you.

  Please respond to me with the following. If there is no action here that you haven't tried, please try them before you answer and include the result in your response to me:

  How the printer is connected (USB / wireless / wired / Bluetooth)?
  Did you test functionality of the hardware (made copies) and they work successfully?
  Have you tried printing from different programs (IE, Chrome, Firefox) web browsing?
  If you are using Windows, run the print and Scan Doctor and understand the results.
  Have you made recent changes to your establishment (moving, upgrade, downgrade, new software, new router, etc.)?
  Have you completed all the updates of Windows/Mac OS?
  You see messages of error codes and if so, what they say and where do you see them?

  Thank you.

  In the meantime, here's a possible solution, that you can try.

  Open the web browser, Print, then select the layout option. Make sure that the print format is set to 100% and that you did not select the shrink to fit.

  I hope this helps and have a nice day.

  If this help will testify of my answer by hitting the thumbs to the top slot

  Click on the button "Accept as Solution" if I helped you reach a solution.

• HP Deskjet F2430: HP Photo Creations

  Whenever I get a different error numbers when I try to download the CODE.  It's frustrating say the least, I tried various links and it does not always let me, it place icon on my laptop and when I clicked it, it went through the process and then came with the DC18 error the last time it came with another code of error... what the heck... I have no idea... not that I'm a model on the computer, I have tried everything I can think... why it keep says "check your network connection?

  I'm connected to wireless...

  Help!

  Okayyyyyy, I found in my settings, one who had this laptop in front of me, has helped just Firefox, not IE.  so, it was not to let me open IE, I tried to solve this problem for days.  As you can see, I don't give up easily, I have now on my laptop and I'm planning on re, re, re, download HPCC, cross my fingers and toes... Thanks for the help!  It's about '' my '' settings...

• DeskJet F2430: erase memory on Deskjet F2430

  Hello

  I can't erase from my memory of the printer to a print job.  In the Windows 7 printer controller, I asked for all print jobs clear.  He says it's deleting, but it is not the case.  IF the printer cannot print.  How can I clear the memory of any print jobs?

  Thank you

  K2N

  Hi @Kneed2No

  I found a document that can help you remove the print job that is stuck in your queue.

  I would try first free tool from HP. He called printing HP and doctor Scan and it is used to diagnose and resolve problems printing. I recommend you to download and run the HP print and Scan Doctor, if she doesn't fix it automatically let me know what errors or messages that you receive.

  If this tool does not resolve the problem, the complete document, I found is; Print jobs stuck in the queue (Windows). 

  Please let me know if these steps solved your problem, or if there is anything else I can do to help.

  I look forward to hear from you!

  Thank you

• Printer spooler does not work. Printer registry file corrupted

  My printer HP Deskjet F2430 does not work. The print spooler is not running. I can't stop and restart services. The registry file is damaged. No printer is displayed in the printers and faxes Control Panel site. How can I clean up the corrupt registry files? Thank you very much.

  Hi MIchelle,

  What exactly is the problem? You are not able to start the service of coil?
  Try to click on Start-> Run Type & -> services.msc-> spooler printer-> Double click on-> start and select automatic for startup type.

  If give you the error, try to replace spoolsv.exe is located in C:\windows\system32 in C:\WINDOWS\ServicePackFiles\i386.

  I hope this helps.

• Scanning help

  I need help scanning.  The alert light is on, as it is one of the cartridge lights.  The Middle cartridge flashes.  I can copy and print correctly.  HP Deskjet F2430, Mac OS X - 10.6.8.  When I try to scan, it says "preparing to scan" and then nothing happens.

  Trying to install a HP update available, restart and check any changes:

  Click the Apple icon, click on software update and install any update HP available.

  Restart your Mac and Champagne for any change.

  If there is no change, please try scanning from your Mac running scanning HP, located under Applications > Hewlett-Packard and let me know of any difference.

  Kind regards

  Shlomi

• Printer has paper, but the computer says that it is paper and print not web

  I have trouble getting the computer to recognize that the printer has paper. The printer prints copies that I put in, but when I want to print from the web, it doesn't let me do; He told me just the printer's paper. I printed a few pages on the web yesterday without any problem at all. I have a HP Deskjet F2430.

  just do a restore to an earlier date and which corrects the problem.

• Tellin me it's out of paper - won't print

  I have a deskjet F2430 all-in-one it was printing ok then started to jam.  I followed all the instructions online and clean the rear rollers.  They were very good.  When I tried to run a test of the rto page he always tells me it is out of paper.  The first seeing yellow flashes.  No matter what I do the same thing is happening.

  Any help would be greatly appreciated.  The model # is CB743A.  It's a F2430.  I tried all the documentation at HP. I am on Windows 7

  Thank you

  Susan

  @susan33437 what you can do to correct the printer does not pick up the paper is described in the document following the link. If this does not work, you will need to replace the printer. If you are still in warranty, HP can replace the printer without cost to you. I'll link the information to get in touch with them below. The link takes you to a form to fill out. Once you fill it and she is treated, it will give you the printers warranty information, a file number and the phone number to call.

  The printer is not looking upwards or the paper feed

  HP Technical Support call case form

  @cbs1986 essentially the same thing. What you can do to correct the printer does not pick up the paper is described in the document below. If this does not work, you will need to replace the printer. If you are still in warranty, HP can replace the printer without cost to you. I'll link the information to get in touch with them below. The link takes you to a form to fill out. Once you fill it and she is treated, it will give you the printers warranty information, a file number and the phone number to call.

  "Out of paper" Error Message and the printer is not looking upwards or the paper feed

  HP Technical Support call case form

• Install hook button (Mac)

  My attempts to install the driver for the HP Deskjet F2430 crashes.  Printer is, by using the USB connection.  Install HP works fine until the Easy or Installation of Cusotm page.  The install button just blinks and will not respond when prompted.  I can go back, or go Easy Install custom, but the install button will not work.  I also tried install disc and download, with the same result.

  The installation easy, says page space required: MB 359,66 and remaining space: 67,08 GB.  I got the Macbook, Mac OS X 10.4.11.  I tried every reboot, uninstall, reinstall, used a test account, nothing.  I also downloaded the correct driver.  Any ideas?  Thank you!!!.

  I tried check disk permissions and repairing disk permissions, without success. I created a test with the admin rights account, same problem was there. Solution: I had to reinstall my operating system Mac OS X I put my operating systems 1 disk in and power on and hold the C key, I believe that to make sure that the computer starts up the disk. I did an Archive and Reinstall to keep my documents, music, etc. After reinstallation, Setup of HP has worked well.

• hp deskjet 990cse printer driver

  I have an old HP Deskjet 990cse printer which needs a new driver.  I've recently updated for MacOS Sierra, and now the printer does not work.  I can't find an updated driver on the HP site.  Disappointment because the printer still works fine.

  Someone at - it a similar problem?

  Thank you.

  I managed to make it work.  I went into system preferences and deleted and then added the printer.  He now uses a generic driver.

• Deskjet 710/720/810/820/1000 Series printers - Patch for 64 bit Vista and Windows 7

  There is a problem with the 64-bit, Vista, Windows 7 and Windows 8 or 8.1 drivers which causes the spooler crash with the following HP Deskjet printers:

  DeskJet 710

  DeskJet 712

  DeskJet 720

  DeskJet 722

  DeskJet 810

  DeskJet 812

  Deskjet 820

  DeskJet 822

  DeskJet 1000

  The attachment contains a fix for this problem for Vista and Windows 7.

  [The patch does not work for Windows 8, 8.1, or 10 x 64 systems.  There are efforts to this address, if a solution is developed it will be shown here.  [{Edit - I did not progress by getting the patch to run in Windows 8 x 64.}]

  First of all make sure that the driver for the installed printer.  If the driver has not been installed go to start devices and printers, add printer, the local printer, choose the appropriate port (for the converters, USB-parallel, the port likely USB001: or maybe USB002 :), then click Windows Update then choose HP for the manufacturer and select the appropriate printer.)

  Apply the patch as follows: log in to the computer with an administrator account.  Download the patch by clicking on this link or on the trombone at the end of this post.  Save the hotfix on your computer, then unzip it.  Then, copy the three DLL files in the following directory: %windir%\system32\spool\drivers\x64\3

  Note that %windir%\System32 is a system variable that points to the location of the Windows directory. For most systems it will be C:\Windows.  You can click Start, computer, and type %windir%\system32\spool\drivers\x64\3 in the address bar and it is in the right place.

  This can be done from a DOS command prompt if BACK is opened with the "run as Administrator" command or to explore with a copy and paste.  Depending on your UAC settings, you may need to provide confirmation.  Also allow existing files to be replaced if you are prompted.

  This patch is not necessary and should not be applied to a 32-bit version of Vista or Windows 7.

  Thanks to extraordinary Microsoft engineer Alan Morris forguidelines for patch.

  Update - here is that of the more detailed installation instructions:

  Download the patch on the DJ_Patch.zip at the bottom of the page and save it on your computer.  Now click on the file and open it, and then extract the fix in a directory that is easy to find. (I use c:\temp. If this directory does not exist you can create it as follows: open the administrative BACK prompts by clicking Start, all programs, accessories, and then right-click on CMD. EXE and select run as administrator. Click in the DOS window, and then type the following command:

  MD c:\temp

  CD \temp

  Now extract the patch files in the c:\temp directory (all, extract c:\temp chose as a destination).

  [Update - Windows security settings can prevent these files from being used, please open computer, type c:\temp in the address bar and then right click on each of the dll files and select Properties.]  If there is a message indicating the properties file has been downloaded from the internet and can be blocked and then unlock the file before continuing.]

  Then, click back to the administrative DOS prompt and type the following: (the green stuff are comments, do not type them...)

  *. DLL DIR (just to check that the files are there, it should list hpvdb720.dll, hpvdb820.dll and hpwm5db1.dll and perhaps others).

  Net stop spooler (ensures that the files are not in use.)

  Copy hpvdb720.dll C:\windows\system32\spool\drivers\x64\3 (this is for the Deskjet 710/712/720/722)

  Copy hpvdb820.dll c:\windows\system32\spool\drivers\x64\3 (this covers the Deskjet 820 and 822)

  Hpwm5db1.dll c:\windows\system32\spool\drivers\x64\3(this covers the Deskjet 1000 copy)

  NET Start Spooler

  Output

  [Edit - note that these DLL files will already be in the directory.  You will get a warning asking if it's OK to replace the files, say "Yes".]

  At this point, the patch is installed and ready to print.

  Note that here printers do not support USB connections, they have only the parallel ports. [Edit - if your printer has a parallel port to use, it will be probably much less problematic than the use of a converter USB / parallel].   If you use a make you converter USB / parallel it is supported in your operating system.  The following messages are reported by cables USB-parallel that are supposed to work in Windows 7.   A driver is required for the converter USB / parallel besides the driver of the printer.  For converters supported, it is usually provided automatically in Windows 7.  Note: the appropriate to select for USB-parallel converter port is often USB001:.  I've heard of cases where the port was USB002: or LPT3: as well.  If the port you are using is unable (after applying the fix) try to change the port by going to start, devices and printers, right-click on your printer and select printer properties, then click the Ports tab.

  Mick4 wrote: the problem is that I only could unzip the 3 dll files but don't know how to replace the bad dll files. Mick 4

  If you use Windows 7 do the following: log in as a user with the administrater properties.  [The following assumes that you are using IE as your browser] Click on the here link and select "Save".   Once the download is complete, select "Open folder", then right-click on the DJ_patch.zip file and select extract all.   If extract all is not an option, then click on "Open with" and select Windows Explorer.

  

  Leave the default directory and check the box "Show extracted files when you are finished", excerpt.   Click Start, computer, and type % windir%\system32\spool\drivers\x64\3.  Arrange the windows so that you can access the two parts of the window.  Go in the first pane and select the three files dll, hpvdb720.dll, hpvdb820.dll and hpwm5db1.dll.  Now drag and drop them to the % windir%\system32\spool\drivers\x64\3 window, select copy and answer to 'replace' in the dialog box.

  Note: %windir%\System32 is a system variable that points to the Windows directory.  For most systems it will be C:\Windows, but it can vary depending on the configuration of NDO of hardware configuration of the computer.  If you type %windir%\SysWoW64\cmd.exe in the address bar in Explorer or in start, search programs and files, it will find the right directory.

• HP deskjet 3540 series (D142AF: print validation error)

  I am trying to print from my computer hp laptop on my wireless printer and I got valedating of the printer... Please can you help me now?

  Welcome to the HP Forums!
  I hope you're well @denden2-_bé

  I read about the error you see when you try to print from your system from Windows 7 to your Deskjet 3540, and I hope to help.

  Please try using Print and doctor Scan for Windows to help troubleshoot printer problems

  If the tool does not help, try to print from other programs, uninstall and reinstall the printer.

  If the problem persists, let me know the details.

  If you have trouble, let me know and I'll do my best to help.

  Hit the "accept as Solution" if we reached a solution and the "thumbs up" to say thank you for my help.

  Have a nice day