HP Deskjet F4440

Similar Questions

• DeskJet F4440 Prod number CB747A Windows XP

  Does not print the page of test or anything else.  Yellow/orange flashes, no other lights are blinking.

  There is a document for flashing lights on Deskjet F4440. The document can be accessed here.
  
  Once you open the document, find the path of question which describes which the light flashes and follow the steps. Let me know if it helps.

• HP deskjet F4440 all-in-one: HP deskjet F4440 all in one software and drivers

  I can't find the software and drivers for this product

  Hello

  The HP Deskjet F4440 done part of the F4400 series, it is suitable for your printer driver.

  What do you mean by it would not work?

  What beavior or specific error message you see all trying to install it?

• Adobe Flash Player, Google Chrome and Deskjet F4440

  Whenever I try to open my HP Deskjet F4440, a dialog box appears indicating that I can't open the program unless I have download Adobe Flash Player in Internet Explorer. First of all, I don't use Internet Explorer and, second, when the last, I was invited to do the same action for another program on my computer, I followed the prompt. However, when I do it by following the instructions, I started having problems with my default browser, Google Chrome (OS: Windows 7). Chrome crashed repeatedly, and after many tests to troubleshoot it, I decided that the course of action was to uninstall and reinstall Chrome. He worked without crashing for a week. Now, I get again the same message for download Flash Player even if I had already done before. I can't use my all-in-one printer for a digitization project and I am extremely frustrated. The upgrade of the unit did nothing to solve this problem. Help, please!

  Hi @rnkh,

  Welcome to the HP Forums!

  I understand that whenever you try to open your HP Deskjet F4440, a dialog box appears indicating that I can not open the program, unless I have download Adobe Flash Player in Internet Explorer and you cannot scan. I'm happy to help you!

  It is possible that there could be a software conflict with Adobe. In order to know for sure I would suggest the following:

  • Uninstall the printer software. Uninstalling the printer software.
  • Clean boot the computer. How to perform a boot in Windows.
  • Re-install using the printer HP install wizard for Windows.

  If this does not resolve the problem, then I would recommend contact the Support from Adobe.

  I hope this information helps!

• His retirement a HP Deskjet F4440

  I have a HP Deskjet F4440 I'm ready to retire. I understand that several printers, copiers and scanners have hard disks that must be cleaned before selling or recycling or memory. What is the case for the F4440? If this is the case, what should I do to take care of this?

  Thank you.

  Hello

  You're right on some models, but this would not apply to your F4440.

  You can get additional information recycling here.

  Thank you

• DeskJet F4440: Deskjet F4440 will not print

  I was using my Deskjet 4440 for scanning and copying of print. Then everything suddenly not but yet it print scans and copies. When I try to print it doesn't even go in the print queue. I tried to redown load software on the line, but that didn't work.

  Hi there @DonJB1 , I hope you're well

  I read your messages not being able to print, and seeing that the printing and scanning Dr. not cross it's wide scan without getting stuck, I have a few more suggestions for you.

  Restart the spooler to print on your computer manually:

  1. click on start
  2. type 'Services' in the search field.
  3. open SERVICES
  4. at the bottom, click "extended view.
  5. search for the print spooler
  6. right click and choose Properties
  7. Select Automatic from the drop-down list, close the window
  8. right-click Print Spooler and select 'Stop', wait until it stops and then again right click and 'Start '.
  9. close out Services and try your print.

  If the prints will still not work and always test print from more than one program such as Notepad and a Web page, try:

  1. Uninstalling the printer software
  2. Restart the PC completely
  3. Download and install the full pilot here: HP Deskjet F4400 all-in-One Printer series Full Feature Software and Driver
  4. Try to print again.

  If the prints are still not working, try a "deeper" uninstall. Here are the steps to do a uninstall of level 3.

  1. Click Start and type %temp%, enforcement and open the temp folder.

  2. Locate and open the folder starting with 7z (example: 7zS2356) (if there is more than one, choose the most recent folder)

  3 open the Util folder

  4 open the CCC folder

  5. run the L3uninstall.exe (can also be a.) BAT file)

  6. once the uninstall is complete, restart the computer

  7 run the Accessories\ System Tools Disk Cleanup

  8. download and install the latest version of Adobe flash player

  http://www.Adobe.com/support/flashplayer/downloads .html

  9 download drivers and full software features: all-in-one printer, HP Deskjet F4400 series full feature software and driver

  10. run the download to reinstall the printer

  Test print now and it should work

  Good luck!

• Deskjet F4440 message "scanner not found".

  When I try to open a HP Device Manager scan job, Scan Pro application opens, but the error message says "Sorry, scanner could not be initialized" and "scanner not found." The button new analysis on Scan Pro window is not active, nor is the new analysis options in the drop-down scan menu.

  I had a HP complete uninstall using the ctrl-option-Apple key method, reinstalled the software, unchecked and re-selected printer in the preferences system, checked power and USB cables and so forth, but the scanner still does not work. The functions of the printer are working effectively.

  I am running OSX 10.4.11 on a 1.07 GHz PowerPC G4

  Control-click the button on the right print queue opens the Deskjet F4400 printer; I can't find an option "Reset Printing System". Control-click in the box of the print/fax area with the list of printers don't open any new windows or provide no option. In my initial post, I neglected to include the fact that my machine is an iBook G4, not a unit of office, if that makes a difference.

• HP Deskjet F4440: Turn wired printer wireless printer

  I see a lot of info on the web lately on turning wired printers and more wireless. Just for fun, I tried my F4440. It didn't work, it was not considered when searched under "Add new printer" in "devices and printers". My question is, can a F4440 be transformed into a printer wireless to connect it via USB to a wireless router?

  Hi @nascarjunky,

  But connect a USB cable from the printer to the router is not supported, it might work. You however will not be able to analyze this way. If you are interested in a wireless printer, you can consider calling our technical support, because they may be able to offer a discount on a newer model. Most of the more recent, if not all, models have the ability to print from mobile devices too. May be worth investigating.

  What you can do, is to use the following link to create yourself a file number, then call and it can help to expedite the appeal process:

  Step 1. Open the link: www.hp.com/contacthp/
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on options contact HP - click Get phone number

  File number and phone number are displayed.

• What is the HP Customer Participation program 13.0 and do I need? DeskJet F4440.

  I just want to know if it's too much space because I do not use it. Is this a program my printer needs or is this something els and I can delete?

  Hello

  As far as I know, it presents statistics on how the product is used to help HP to develop and improve their products, so I imagine that this could well point out any error that meets your printer.  It is not responsible for the updates - you must have a separately installed application called HP Update which is responsible for this.

  Of course, every system is different, but I can say that I uninstalled without loss of functionality - I also remember receiving a similar warning when uninstalling.

  As a point of interest, in the early stages of the installation of the suite of the printer, if you select the Advanced Options, you can select not to do to install this application (and other optional components such as Photosmart Essentials, shop supplies etc.).

  The link below is a thread on another forum about what you might want to read.

  http://www.msblog.org/2007/04/16/HP-customer-participation-program-software-causing-memory-leak/

  I hope this helps.

  Kind regards

  DP - K

• HP Deskjet F4440 presents little ink (no!) and will not be printed

  I had this problem for a few months. Every once in a while, it will not print a document, shows ink levels are low, but the image of the ink levels shows half full on the black and color.

  I put the printer off, wait a few minutes and turn it back on - then it will print. Help?

  Windows 7 64 bit

  The printer did not properly read the ID of the cartridge.

  If this has resolved that the issue please mark the thread as solved by clicking on "Accept as Solution" on the answer that solved the problem.  This will make it easier for other similar issues for the solution.

• hp f4440 deskjet scanner not working not not with mac osx 10.7.4

  Hello;

  I have connected the hp deskjet f4440

  on my Mac Pro computer

  Processor 2 x 2.8 GHz Quad - Core Intel Xeon

  Memory 8 GB 800 MHz DDR2 FB-DIMM

  Graphics  ATI Radeon HD 2600 XT 256 MB

  Software  Mac OS X Lion 10.7.4 (11E53)

  I went through all the troubleshooting steps on the HP site for hp deskjet f4440 - start by downloading the latest version of the driver. I also tried scanning using Preview and through the system of preferences. All give me the error message "failed to open a session with this device." The printer works fine. But I'm frustrated because I need to use the scanner! Help, please!

  Kind regards

  Paul

  Hello ppriemo

  How is the printer connected (USB or wireless)?

  Have you been through the article: "the scanning device could not be initialized" and related scanning errors display in Windows XP, Windows Vista and Mac OS X.

  If this isn't the case, I suggest you go through the article as he has several possible solutions.

• Problems installing driver Deskjet F4400

  I can't have the drivers for the Deskjet F4440 to install. I get a message saying: "error 1310.Error writing to file C:\Program HP Imaging\bin\hpiscncc.dll. "Make sure you have tp access this directory. How can I fix?

  Hi mherrera95,

  Try using the brush included in the CD or download. Let me know what you find?

  Of the Original installation CD:

  1. Insert the CD in the drive and then cancel Setup

  2. open my computer and click right then on the CD from the drive and select open

  3 open the Util folder

  4 open the CCC folder

  5. run the uninstall_L4 (exe or Bat)

  6. once the uninstall is complete, restart the computer

  7 run the Accessories\ System Tools Disk Cleanup

  8. download and install the latest version of Adobe flash player

  http://www.Adobe.com/support/flashplayer/downloads.html

  9 download drivers and full software features

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=al-68493-4&CC=US&DLC=en&LC=en&os=2093&Product=3837411&sw_lang=

  10. run the download to reinstall the printer

  If the software has been downloaded and extracted to your system:

  1. type % temp % in the field of race

  2. Locate and open the folder starting with 7z (example: 7zS2356)

  3 open the Util folder

  4 open the CCC folder

  5. run the uninstall_L4 (exe or Bat)

  6. once the uninstall is complete, restart the computer

  7 run the Accessories\ System Tools Disk Cleanup

  8. download and install the latest version of Adobe flash player

  http://www.Adobe.com/support/flashplayer/downloads.html

  9 download drivers and full software features

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=al-68493-4&CC=US&DLC=en&LC=en&os=2093&Product=3837411&sw_lang=

  10. run the download to reinstall the printer

• Dell F4440 blue print instead of green

  Can someone tell me why my Dell F4440 printer prints green blue color? It starts only recently. Unfortunately I hit 40 photos before I realized what he was doing. He also had lines running through some of the pictures. They were, in some cases running diagonally and vertical in others. I changed the cartridges (twice) both black and color with the same result.

  From Internet Explorer

  Original title: printer

  Hi John,.

  Thanks for posting your query in Microsoft Community.

  It is a model of HP printer?

  According to the description of the problem, the question is very specific to the printer or print related settings of Windows Manager. At most, we could you to reinstall the printer drivers and check if the problem persists. If it's a HP Deskjet F4440 all-in-one printer, then you might check out the following link for drivers:

  HP Deskjet F4440 all-in - One Printer - drivers and software

  For more support, refer to the HP printer is supported.

  If, however, it is a Dell printer model, you can see the following to get your product automatically detected:

  Dell-Drivers and downloads

  Hope this information is useful. Let us know if you need more help, we will be happy to help you.

• "Unable to send data to the printer.

  I have a HP deskjet F4440 printer.  He has always fought linking to our Mac.  We restart the printer or the computer often to do print, but after doing one or the other it would work normally.  But now it doesn't connect at all.

  I uninstalled and reinstalled the printer.  I downloaded and installed the software from the apple support Hewlett-Packard printer.  I restarted my computer, uninstalled and reinstalled my printer.  It presents itself as "in use" but says "Unable to send data to the printer" when I try to send a simple text of pages for print test.  When I try to scan it shows that the scanner is connected, initially said "waiting for scanner", then 'scanner is not available' stops.

  Do you have any suggestions?  Thank you!!!

  Hi mandi820,

  Welcome to the HP Forums! I see that your HP deskjet F4440 printer has difficulty to connect to your Mac. I'm happy to help you with this problem of connection! I have a few questions for you:

  • What version of Mac OS X are you using? OS x: find your OS version and build information.
  • How is the printer connected? Wireless, or USB?
  • Can you make copies with the printer?
  • The cable is connected to a surge protector or directly on a wall outlet? Questions when it is connected to an uninterruptible power supply/Strip/surge protector power.
  • You can print a self-assessment report extended? Print a self-test report extended.

  Hope to hear from you and have a great day!

• Installing a printer without a disk and says incompatible when I had once installed.

  I have a windows vista HP and HP deskjet F4440 printer that I accidentally uninstalled and now I can't he relocated. He says that is not compatiable, I do not have the disk that came with it and the scan does not find it. I have installed, why can't I reinstall?

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?product=3837411&LC=en&cc=us&DLC=en&lang=en&cc=us

  Select your operating system to the above link > get the right drivers.

  http://h10025.www1.HP.com/ewfrf/wc/product?product=3837411&LC=en&cc=us&DLC=en&submit.y=4&submit.x=8&lang=en&cc=us

  Read how to install it and use it at the link above.

  If you have additional problems, contact HP:

  http://h10025.www1.HP.com/ewfrf/wc/contacthp?LC=en&DLC=en&cc=us&lang=en&product=3837411

  See you soon.

  Mick Murphy - Microsoft partner