HP Deskjet F4480: Error paper output

Similar Questions

• HP Officejet Pro 8620: Error paper output

  I was printing from my computer to my HP Officejet Pro 8620. I got a job and then I got the next ready to print work.  That's when I got an error "no more paper. Loading tray. "The problem is that the tray was out of paper. The paper tray is loaded and closed. I have even the printer off, left for a few minutes, then turned it back. I ALWAYS get the error "out of paper. loading tray. "Help, please!

  No software change or recent driver. My internet connection is wireless.

  Hi kwhite1,

  Thank you for the update. I hope that the cleaning rollers solves the problem. :-)

• DeskJet F4480: full black print cartridge still does not print black. Colors OK.

  What the title says. All of a sudden my Deskjet F4480 does not print black. All cartridges are almost nine (changed recently, bought at Staples). Colour printing is OK. Print a page with black text and results in only the images printing color images. I only went through all the steps of cleaning cartridge several times, no difference. There is no error message, just black not appear do not at all.

  And... Here is the solution.

  Funny how I found an explanation of the problem and how to fix it on a different printer manufacturer's Web site, but not on HP... But I digress.

  The black cartridge has been blocked. The way of difficulty is:

  1. remove the faulty cartridge from the printer.

  2. place a small amount of boiling water in a cup (about 1/4 in.) and dunk of the print head (the part where the ink comes out) in warm water for a minute. Do not immerse the entire cartridge in hot water, just the print head.

  3 take it out, pat against a paper towel, observe the model ink left in the cartridge on the towel. If too little / interrupted, dunk again in hot water for another minute, pat again. You want to get an unbroken line of ink through the length of the print head. Repeat as needed (I did 4 times total).

  4 cartridge Pat dry everywhere, put it back in the printer, run cleaning cycles (1 - 2).

  5. If still not good fixed, take out the cartridge and repeat 2 (I had to do it again).

  You will lose little ink, cartridge of bad and good a well (you can not run cycles with only 1 cleaning cartridge), but at least you won't have to throw a nearly full cartridge.

• HP Deskjet F4480 shoots blanks

  HP Deskjet F4480 and Windows 8.  All of a sudden, in the middle of printing and copy, my printer started to produce blank pages. I changed nothing; the release went just fine, perfectly acceptable from the copies & pages impressions. Even when the printer is not connected to my computer and I try to copy something, the pages come out blank.  The color cartridge is low, but I'm trying only to print & copy b & w & this ink level is fine. Light bar moves across the plate and the cartridges move freely. HP Diagnostics detected no problems, but even the test page came out white. I turned printer and computer off and turn it back on to no effect. There is no error message. Any of the addresses messages to troubleshooting this problem & my printer is out of warranty, so I can not get the HP technical support.  I'm at the end of my roll and ready to throw the printer out the window. I'm not in computer so need an answer adapted to my disability.

  Hello

  Try to print a self-test by clicking on the power and Cancel buttons, you don't see any output black ink?

  http://support.HP.com/us-en/document/c01361419

  Otherwise, try to remove the ink cartridge and put the bottom on a fabric - physically you see any black ink?

  1. Open HP Solution Center

• HP deskjet f4480 printer range: cover open Message, hp deskjet f4480 printer

  Hello

  I accidentally broke the door sensor for my printer.

  The solution says: "Open" and it will not be printed.

  I tried to install the broken sensor myself, that says 'C 15' on it.

  but I have no idea where it is supposed to go.

  Thank you.

  Hello @Jen91,

  Welcome to the Forums of HP Support!

  I understand that you have a sensor of door broken on all-in-one printer, HP Deskjet F4480. Unfortunately, the door sensor is not replaceable part in your HP Deskjet printer. Therefore, to correct the error message 'Door open' on your printer a whole unit replacement would be necessary.

  I recommend at this point, contacting the Technical Support queue by phone to explore hardware options.

  HP Technical Support can be reached at the: 800-474-6836.

  If you do not live in the United States / Canada region, please click the link below to get help from your region number.

  Worldwide contact HP

  I wish you good luck going forward with this!

• Cannot get mac to install my accept my HP Deskjet F4480

  I bought a computer mac laptop and have a mac desktop computer.  The HP Deskjet F4480 came as a promotion for purchase.  I installed the disk that came with it and who says series HP Deskjet F4400 Mac OS X v 10.4 10.5; version 10.0.  My desktop runs Leapard Mac OS X Version 10.5.8.  My laptop is running the same version.

  The printer does not appear, so I check the box that says the printer is not listed.  It appear the printer.  I get the following error message when I try to add a printer:

  Your device is not listed, it is not supported, it is not supported by the installer.

  I downloaded the disk HP downloads software, but I get the same message.

  What can I do?  Is there some type of patch or setting on my computers that needs to be changed?

  As the drivers of your printer (printing and scanning) are loaded in 10.6, I would uninstall all software from HP which is on your Mac.  Use the application uninstaller in Applications HP > Hewlett-Packard.

  Then, do a software update (Yes, again).

  Reset the printing system, then add your printer via the sign '+' in print & fax.

  One last thing - is known to be good USB cable and you're not going through a USB hub, right?

• HP Deskjet F4480 conflict printer driver

  Printer HP Deskjet F4480, Windows 7, driver conflict error

  When I could not print, I ran the HP diagnostic tool, who met a driver conflict.  I followed his instructions and uninstalled the current driver and reinstalled the latest driver, but I still cannot print.  I restarted the diagnostic tool again with the same result, met a driver conflict.  How can I get rid of the conflict driver for my printer?  Thank you.

  What you describe, it seems that the USB cable is connected to the computer until the installation software asked for the connection.  In this case the generic Windows drivers and the HP drivers will try to install and collide with another.  I would like to Uninstall the printer and software.  Then reinstall of a fresh software download and make you wait for the software to ask the USB connection.  Let me know what happens.

• I have a HP Deskjet F4480. It will print not web searches in IE 9 - 64 bit, only in 32 bit.

  If I switch to IE 9 to 62 bit version, my web to print disappears.  for example, I can't print Google Maps.  32-bit, everything works fine.  I'm on MS Outlook 2010 with Windows 7 Home Premium.  What is the reference for this?  The error box says:

  Line: 2126

  Char: 1

  : Error unspecified.

  Code: 0

  URL: res://ieframe.dll/preview.js

  Do you want to continue running the script on this page?

  Yes No

  Looks like you have the 64-bit Internet Explorer script error.

  Honestly, the 64-bit web browsing has not yet reached its cruising speed that not all web pages is configured to run with Internet Explorer 64-bit.  64-bit navigation has come a long way, but there is still a lot of work to do before it's also compatible with web sites like 32-bit browsers.

  This Microsoft document discuss the matter with a little more detail.  They suggest updating the driver first, but I have not seen this solve the problem that leads me to believe the issue is not with the printer driver.  This does not mean he does not and is not worth a try, but my experience this always ending by using Internet Explorer 32-bit to make any impression of web pages.

  The last driver for Deskjet F4480 and Windows 7 64-bit is dated 2009.  More than likely, you already have the latest driver.

• HP Deskjet F4480: HP Deskjet F4480 scanning failed, re - load the disc has not

  Several scans immediately followed by a sort of message "software may be unavailable.  Analysis of the work stoppages.  Re-boot does not work.

  Has decided to re - install the drivers.  Download "HP Deskjet F4400 all-in - One Printer Series full feature software and driver...» ».

  Installation fails with "cannot access the registry key 'HKEY_LOCAL_MCAHINE\SYSTEM'.  Uninstall fails to 54% in step 9 of 11.

  MS DeviceCenterDiagnostic.xml and PrinterDiagnostic .xml both fail with the error 0x803C010B.    Hmmm, the common theme here is 'failure '.  Stories of success there?

  Hello @notamused,

  Welcome to the Forums of HP Support!

  I would like to help you today with the Setup error: "unable to access the registry key 'HKEY_LOCAL_MCAHINE\SYSTEM' when you try to install the HP Deskjet F4480 all-in-one printer on your computer Windows 8.1. Can I please have performed you the steps below.

  Step 1: Work around error:

  1. Run the installation again.
  2. When you get the error screen again please press on and hold the keys SHIFT and Ctrl at the same time
  3. Click Cancel
  4. Installation should ignore the screen of the error and continues from there until the end.

  If your error still occurs, please follow the steps below.

  Step 2: Uninstall the drivers:

  Please click here to load the Microsoft uninstall tool. Once the site opens, select the button run now on the right. Enable the Microsoft Fixit Tool run.

  At the prompt, run the recommended patches. Choose that you need help with uninstalling. You should be brought to a list of programs. Scroll down the list until you see you package install HP Deskjet . Select your Deskjet, and let Microsoft Tool to remove this package.

  Note: The Microsoft uninstall tool will also fix corrupt registry keys that might contribute to your error.

  Step 3: Delete the temporary files:

  1. Open your Startup screen by clicking the Windows button on the lower left of your screen, or by selecting the Windows key on the lower left of your keyboard to the right of the Ctrl key.
  2. Once the splash screen opens, type RUN
  3. Click Run to open the Run dialog box
  4. In the run box, type %temp% , and then click OK
  5. When the Temp folder opens, select Ctrl + A at the same time on your keyboard. Everything in this folder will highlight now.
  6. Select the button delete on your keyboard. This folder contains the temporary internet files. None of the actual files or folders on your computer will be affected by deleting Temp files. A file should always be used you automatically gets the option to "Skip" this file.
  7. Close the Temp folder
  8. Right click on your recycling bin and select empty recycling bin

  Step 4: Reinstall the drivers:

  1. Please click here to download the appropriate drivers for your printer
  2. Once the site opens, click on the download button at the top left
  3. Allow download the run when prompted
  4. Once the download is complete extraction will occur and the installation window will launch
  5. Please follow the instructions on the screen to reinstall your printer
  6. Do not connect your cable USB before installing invite you to

  Once installation is complete, please test you print and scan features to ensure that your printer works according to normal.

  Please let me know if the steps I have provided solve your installation problems. I look forward to hear from your part, have a Happy New Year!

• Problems installing HP Deskjet F4480

  I've installed, uninstalled, installed, uninstalled my HP Deskjet F4480 I bought again today.  When I go to HP Solution Center and click on Scan I get an error: a required software component cannot be found or has been incorrectly installed.

  Information relating to the error 8, [(8,0,0]

  When I click on print, then get an error that says hpqcutil.dll was not found.

  I tried to download it yourself... I worked on it for 3 + hours today.  Please help me.

  Thank you.

  On your printer software CD, locate a uninstaller "L3".  Run it.

  Now, download the software from the hp support site.

• Deskjet F4480 installation problems

  My initial installation of a Deskjet F4480 went normally and the unit worked as desired for some time.  When error messages began to appear during attempts to scan, I tried to uninstall and reinstall the software.  During this process the installation wizard hangs at the point when it asks to connect the USB cable.  The device is on and Windows XP SP3 recognizes the hardware when I click the icon remove the device safely in the system tray.  Help, please!

  Have you tried printing HP and doctor Scan Utility?  It can fix many printing and scanning of the common issues?

  http://support.HP.com/us-en/document/c02073861

  -Goes2Eleven

• HP Deskjet F4480: Can I use just black ink in my printer HP Deskjet F4480?

  I have a HP Deskjet F4480 printer.  I only use it to print in black ink.  Is it possible to use only black ink in the printer (which is much cheaper)?  Thanks for any help you can provide.

  Grayscale is more useful for printers that have four or more cartridges. You can find on the feature by clicking on this link, but I'm not positive how useful it will be for you.

  Insert a black cartridge in the color slot will not have to act as a backup cartridge. The printer will see that it is not a color cartridge and refuses to read or use it.

  Please let me know if that solves your problems.

• hp deskjet F4480 printer: Hp deskjet F4480 printer

  I would like to install a printer hp deskjet F4480 on my new computer hp pavillion laptop.  the install cd says it's for XP, Vista, windows 7.  How to use this printer with my laptop?

  Use the full functionality of the section of this site drivers installation software:

  http://support.HP.com/us-en/product/HP-DeskJet-F4400-all-in-one-printer-series/3742084/model/3742085/drivers

• HP Deskjet F4480 multifunction: Session of scan on my HP Deskjet F4480

  While I was going to end my session of scanning of 33 photos to my computer, Windows 10 has experienced a breach which caused my system to freeze and forced my laptop at the restart/reset and this process my session was forced to stop because I had lost my connection and had to wait for Windows 10 have restarted , but once this has been done, and I have opened the HP Digital Imaging Monitor, my scanned photos were not where. So, what I need to knowis if photos have been saved or stored at any tme during the analysis session or are they not saved until the end when you're done the scan, which would mean that all the work I've done and the time, I spent scanning, was nothing more than a waste of time?

  Thanks in advance for any information your long enough to help me find an answer and solve this problem

  Hey @Sandalwood,

  Welcome to the Forums of HP Support!

  I understand that your Windows 10 PC crashed when scanning photos of Deskjet F4480 all-in-one printer. HP Scan does not save the file unless you click the save button. You will need to scan your photos again.

  Please let me know if that answers your question by clicking on accept solution and if you appreciate my help by clicking the thumbs up icon. The two icons are below this post.

• Printheads can not be cleaned (Deskjet F4480)

  I have a Deskjet F4480 printer, which remained a little.  I installed in on my Mac running 10.7 (Lion).  Tried to print a test page and it cannot print anything on the page.  I tried to clean the print heads using the HP software, but he failed and instructed me to contact HP support.  The printer is out of warranty, so I can't contact them easily.

  Any advice on how to get the printer working again?  Ink tank is fine, but I can also replace cartridges if necessary.

  Thank you

  Annie

  Sorry to hear that you are experiencing this issue. Here is a link to a document that explains how to manually clean the cartridges and more important still, the contacts inside the machine. Which could help because the print head cannot be purchased.  It also tells one what cleaning supplies to use the printer. Here is the link http://support.hp.com/us-en/document/c00864517