HP Deskjet F4480: HP Deskjet F4480 scanning failed, re - load the disc has not

Several scans immediately followed by a sort of message "software may be unavailable.  Analysis of the work stoppages.  Re-boot does not work.

Has decided to re - install the drivers.  Download "HP Deskjet F4400 all-in - One Printer Series full feature software and driver...» ».

Installation fails with "cannot access the registry key 'HKEY_LOCAL_MCAHINE\SYSTEM'.  Uninstall fails to 54% in step 9 of 11.

MS DeviceCenterDiagnostic.xml and PrinterDiagnostic .xml both fail with the error 0x803C010B.    Hmmm, the common theme here is 'failure '.  Stories of success there?

Hello @notamused,

Welcome to the Forums of HP Support!

I would like to help you today with the Setup error: "unable to access the registry key 'HKEY_LOCAL_MCAHINE\SYSTEM' when you try to install the HP Deskjet F4480 all-in-one printer on your computer Windows 8.1. Can I please have performed you the steps below.

Step 1: Work around error:

  1. Run the installation again.
  2. When you get the error screen again please press on and hold the keys SHIFT and Ctrl at the same time
  3. Click Cancel
  4. Installation should ignore the screen of the error and continues from there until the end.

If your error still occurs, please follow the steps below.

Step 2: Uninstall the drivers:

Please click here to load the Microsoft uninstall tool. Once the site opens, select the button run now on the right. Enable the Microsoft Fixit Tool run.

At the prompt, run the recommended patches. Choose that you need help with uninstalling. You should be brought to a list of programs. Scroll down the list until you see you package install HP Deskjet . Select your Deskjet, and let Microsoft Tool to remove this package.

Note: The Microsoft uninstall tool will also fix corrupt registry keys that might contribute to your error.

Step 3: Delete the temporary files:

  1. Open your Startup screen by clicking the Windows button on the lower left of your screen, or by selecting the Windows key on the lower left of your keyboard to the right of the Ctrl key.
  2. Once the splash screen opens, type RUN
  3. Click Run to open the Run dialog box
  4. In the run box, type %temp% , and then click OK
  5. When the Temp folder opens, select Ctrl + A at the same time on your keyboard. Everything in this folder will highlight now.
  6. Select the button delete on your keyboard. This folder contains the temporary internet files. None of the actual files or folders on your computer will be affected by deleting Temp files. A file should always be used you automatically gets the option to "Skip" this file.
  7. Close the Temp folder
  8. Right click on your recycling bin and select empty recycling bin

Step 4: Reinstall the drivers:

  1. Please click here to download the appropriate drivers for your printer
  2. Once the site opens, click on the download button at the top left
  3. Allow download the run when prompted
  4. Once the download is complete extraction will occur and the installation window will launch
  5. Please follow the instructions on the screen to reinstall your printer
  6. Do not connect your cable USB before installing invite you to

Once installation is complete, please test you print and scan features to ensure that your printer works according to normal.

Please let me know if the steps I have provided solve your installation problems. I look forward to hear from your part, have a Happy New Year!

Tags: HP Printers

Similar Questions

  • Half-life 2 says failed to load the Launcher DLL specified module could not be found

    Failed to load the Launcher DLL:

    the specified module could not be found

    Hi Madoo17,

    Welcome to the community of Microsoft and thanks for posting the question. I've surely you will help find a solution on the issue.

    1. Once you get this error message?

    2. it worked before?

    3 did you changes to the computer before the show?

    Perform the steps:

    Method 1:

    Put the computer in a State of boot is a way to know which application is causing this problem.

    To help resolve the error and other messages, you can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

    Step 1:

    Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.

    Follow the steps in the link below to do the same thing:

    How to configure Windows XP to start in a "clean boot" State

    Note: After troubleshooting, be sure to set the computer to start as usual as shown here:

    Step 2: To configure Windows to use a Normal startup state

    After you have used the boot is a way to solve your problem, you can follow these steps to configure Windows XP to start normally.

    a. Click Start and then click Run.

    b. type msconfig and click OK. The System Configuration Utility dialog box appears.

    c. click on the general tab, click Normal Startup - load all services and device drivers and then click OK.

    d. When you are prompted, click on restart to restart the computer.

    Method 2: Use the (SFC) System File Checker tool.

    SFC system gives an administrator the ability to scan the files all protected to check their versions. If the System File Checker detects that a protected file has been replaced, it retrieves the correct version of the file in the folder cache (% Systemroot%\System32\Dllcache) or the Windows installation source files and then replaces the incorrect file. System File Checker verifies and repopulates the cache folder also. You must be logged in as an administrator or as a member of the Administrators group to run the System File Checker.

    Check out this link to do the same thing:

    Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

    Hope this information helps. Please reply back with the State so that we can help you.

  • Failed to load the local profile. IO error. All files in My Documents have disappeared. How to restore

    did a normal turn on the computer.  Message came back failed to load the local profile.  IO error.  When he signed me, all my documents in My Documents had disappeared.

    A corrupt profile is fairly easy to recover with minimal losses.  Refer to the following procedure:

    "How to recover damaged Windows XP user profile"
      <>http://support.Microsoft.com/kb/555473 >

    Corrupt profiles are almost always accompanied by hard drive corruption.  After recovery, scan your hard disk for errors using chkdsk with the /f or/r option

    "How to perform disk error in Windows XP check"
      <>http://support.Microsoft.com/kb/315265 >

    The disk check procedure can take hours depending on the size of your hard drive and the amount of corruption and cannot be interrupted, then run it when you won't need your computer for awhile.

    HTH,
    JW

  • Test the connection to the database failed: connection to the server could not

    I have one of my servers HPOV NNMi 9.23 restarted this morning and NNMi is loading is no longer.  I see the following errors in the newspapers said:

    /var/opt/OV/log/NNM/public/nmsdbmgr.log

    06/04/2015-09:28:05 connection to the database test failed: connection to the server could not: connection refused
    The server running on host "127.0.0.1" and accept
    TCP/IP connections on port 5432?

    /var/opt/OV/log/NNM/public/postgres.log

    2015-04-06 09:25:55.312 EDT: 8580:0LOG: could not translate the hostname "localhost", "5432" service at the address: name or service not known not

    2015-04-06 09:25:55.312 EDT: 8580:0WARNING: could not create listen to "localhost".

    2015-04-06 09:25:55.312 EDT: 8580:0FATAL: could not create TCP/IP sockets

    I have checked/etc/hosts and found the following entry:

    #; Local
    #;
    127.0.0.1 localhost

    The command line, I can ping localhost without problem.  Not sure why NNMi begins not at this point.

    Turns out be the permissions on the file/etc/hosts.

  • start the computer to start but stops at "failed to load the core file?

    Original title: how to get Windows XP to boot my computer from starting when starts but stops at "failed to load the core file?

    When I try to start my computer, it stops at "cannot load the kernel."  It will go no further. What is the solution?

    Please see: How to perform a Windows XP repair install

  • the user profile Service service has no logon failed to load the user profile

    I received the following message when I try and log in my account to have:

    The user profile Service service has no logon failed to load the user profile

    What are my options?

    Hello

    1st thing to try is the system in safe mode restore to before the problem

    http://www.windowsvistauserguide.com/system_restore.htm

    Windows Vista

    Using the F8 method:

    1. Restart your computer.
    2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
    3. Select the Safe Mode option with the arrow keys.
    4. Then press enter on your keyboard to start mode without failure of Vista.
    5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
    6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

    If that does not solve it read more

    read the tutorial below

    http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

    When you log on a Windows Vista-based or a Windows 7 computer by using a temporary profile, you receive the following error message:

    The user profile Service has not logon. User profile cannot be loaded.

    http://support.Microsoft.com/kb/947215#letmefixit

    Your user profile was not loaded correctly! You have been logged on with a temporary profile.

    http://support.Microsoft.com/kb/947242

    If you tried to log on to Windows and received an error message telling you that your user profile is damaged, you can try to fix it. You will need to create a new profile and then copy the files from the existing to the new profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

    http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

  • ENVY 20-d010t: "ERROR: no boot disk was detected or the disc has failed." On HP Envy 20

    Hello-

    I have a 20 WANT all-in-One PC and until yesterday it was working fine. When I turned on my PC, a black screen appears with the message: "ERROR: no boot disk was detected or the disc has failed." I followed the instructions on this post and ran a Test drive in the BIOS. I ran both the Quick Check and balance of large and both have been adopted. I don't know what to do now. All solutions?

    Thank you

    mgmartinelli

    Future viewers of this post.

    I took my PC to the Geek Squad at my local Best Buy store and it turns out that Windows was just corrupted. All you have to do is to do a full restore using recovery discs. For more information about your model, I would just search on the internet.

  • "When I tried to sign on the computer, I get the following message: the user profile service service failed connection, failed to load the user profile.

    "Whenever I tried to sign up with my password to connect, do the following: the user profile service service failed connection, failed to load the user profile" when I click OK, it disconnects... Help, please

    Go to Safe Mode and do a system restore. See the link below:

    The user profile Service has not logon. User profile cannot be loaded
    http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/the-user-profile-service-failed-the-logon-user/995955f8-d9d4-4148-840D-c896c3be78b8

    Follow the links on the post.

  • Failed to load the user profile on my laptop. Help

    I can't connect my laptop as his watch the above message, it is 2 years and a half old and isa an inspiron 1525, helps, I know I need to re boot, but as I am not too good with the system and was looking to find out where to download a disc and make sure that I get the right one can someone help me. in my library now wiyh a ubs if I need.

    Next time please post the error message in its entirety... verbatim.

    What is the real error message?...

    Failed to load the user profile and the user profile service does not log

    If Yes, read on...

    You haveanother admin account , you can connect?
    If so, please do and do a system restore, if no help, run the Microsoft Support tutorial below.

    If you don't have another admin account, go into safe mode.
    Here's how to get safe mode:
    Shut down your computer > turn it back on and immediately and repeatedly tab key F8 until you see a black and white screen. The top/down arrow and select Safe Mode with network.

    In the window of logon in safe mode...
    1 can connect to your account administrator in safe mode?
    If so, do a restore system first, if no help, run theMicrosoft tutorial support listed below.

    2. If you can't log into your own account, you see another admin next to your account in the logon screen?
    If you do, that one is the built-in Administrator account. By default, there is no password. Connect to it and newdo a first system restore, if not help, run the Microsoft tutorial support listed below.

    If you are able to log on in safe mode, do a system restore. Choose a date when you were able to log in NORMAL MODE as your restore point.
    How to restore the system:
    http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

    Tutorial from Microsoft support :
    http://support.Microsoft.com/kb/947215
    There are several methods, go through one by one.
    Method 3 has a "fix it for me" application

    For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

  • Log: error message: "the service user profile service has no logon failed to load the user profile.

    Error message: "the service user profile service has no logon failed to load the user profile.

    Unable to connect.

    ·                        Restore point:

    Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

    Try a restore of the system once, to choose a Restore Point prior to your problem...

    Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    If the above does not work:

    ·                        http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

    See if the information in the above tutorial will help you.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    http://support.Microsoft.com/kb/947215#letmefixit

    Error message when you log a computer Windows Vista-based or Windows 7 by using a temporary profile: "the user profile Service has no logon. Unable to load the user profile.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

    Difficulty of a corrupted user profile

    After creating the profile, you can copy the files from the existing profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    http://support.Microsoft.com/kb/947242

    A temporary profile is loaded after you connect to a Windows Vista-based system

    See you soon.

    Mick Murphy - Microsoft partner

  • I also, I get the error "the service user profile Service has no connection, failed to load the user profile" but I have not been able to correct the problem by following the listed solutions.

    I got the error "the service user profile Service has no connection, failed to load the user profile" when you try to use my desktip.  It is on the login page.  My account icon loads and the guest account. I have enter my password as an administrator and get the error message listed above. I followed all the solutions I could find and it is not corrected.

    I have a slight hitch, after several failed here, I checked the domestic Group on my laptop and I have high listed as connected to the Group Home Office; with all the files.  How can I fix the desk top to coinside with his status of being online.  Yet once, my counter top will not recognize the password, but the desk top shows online in the home group.

    Home Group is Windows 7.

    Here is the Vista Forums.

    What operating system do you use?

    Vista info below:

    ·                        Restore point:

    Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

    Try a restore of the system once, to choose a Restore Point prior to your problem...

    Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    If the above does not work:

    ·                        http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

    See if the information in the above tutorial will help you.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

    Difficulty of a corrupted user profile

    After creating the profile, you can copy the files from the existing profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    http://support.Microsoft.com/kb/947242

    A temporary profile is loaded after you connect to a Windows Vista-based system

    See you soon.

    Mick Murphy - Microsoft partner

  • The \Driver\WUDFRd failed to load the device driver USB\VID_0483 & PID_2016\5 & 295bd535 & 0 & 2.

    WUDFRd failed to load of the device

    Hello

    I did a clean install of Windows 7 64 bit and everything goes fine until I started to add the specific drivers of lenovo t61p.  I get the following in the Event Viewer error message:

    The \Driver\WUDFRd failed to load the device driver USB\VID_0483 & PID_2016\5 & 295bd535 & 0 & 2.

    After a lot of Googling, I found that the usb device is a fingerprint reader.  remove the fingerprint reader drivers removes the error in Event Viewer.

    AuthenTec TouchChip fingerprint coprocessor uses the v1.5.0.289 driver.  their website States that the error is a problem with Microsoft.  See this link:

    http://support.AuthenTec.com/Knowledgebase/KBview/tabid/843/ArticleID/443/WUDFRd-failed-to-load-for-the-Device.aspx, or search their Knowledge Base for "WUDFRd failed to load for the device.

    I see that the other members of the forum answers have similar problems, but they still have to find a solution.  is that someone in Microsoft could provide an update for a fix?

    Yes! After two years, I found a solution.  I installed a previous version of Lenovo sw fp and it fixes attention on win 7 sp1 2 t60.  I've been running for about 3 weeks and warning went on two PCs. then, download and install IN1FGP08WW1.exe.  It is fp s-o of Lenovo in UTEK and there the pilot to clear the warning.  BUT it's not as safe as the current Lenovo sw fp.  Apparently, she was abandoned when authentic bought UTEK because of this.  as I understand it, if someone has physical access to your pc they can decifer pw of windows in the registry.  This isn't a big problem for me.

  • I'm trying to scan a doc and the message is 'not found computer. Ensure that the HPsoftware has been installed on the computer.

    I'm trying to scan a doc and the message is 'not found computer. Ensure that the HPsoftware has been installed on the computer. My computer print very well so I do not know why it does not scan.

    Hello

    Thanks for the information. Two things to try. First of all, try to align your print cartridges using the controls on the printer display panel. As part of this process, the printer will print on a sheet of alignment that you place on the printer and scan in the printer. See if it works successfully. If not, see the following page: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02451000&cc=us&dlc=en&lc=en&jumpid=reg_r1002_usen_c-001_title_r0011 .

    The second thing to try is the print and Scan Doctor Utility, download here: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-114642-1&cc=us&dlc=en&lc=en&os=4063&product=5061082&sw_lang=. Its a standalone process and requires no explanation.

    Let me know if one of them fixes the problem.

    Kind regards

    BearPup

  • Failure of the load of the inventory... OPatch failed to load the inventory for the Home.OPatch Oracle data failed with the error code = 73

    Hello

    I will apply patch bundle and my oracle database 11.2.0.2 and Microsoft Windows x 86 platform. As read the file Readme Oracle recommends to use OPatch utility version 11.2.0.1.3 or later. To check the inventory availability I use the command lsinventory % ORACLE_HOME%/OPatch/opatch.

    It ended to give details below.

    Citing O 11.2 patch .0.1.1

    OPatch could not create/open history for writing file: * my home oracle path***\cfgtoollogs\opatch\opatch_history.txt

    **ORACLE_HOME***\cfgtoollogs\opatch\opatch_history.txt (access is denied)

    Setup Oracle interim Patch version 11.2.0.1.1

    Copyright (c) 2009, Oracle Corporation.  All rights reserved.

    OPatch could open the log file, the recording is not possible

    Home Oracle: *.

    Inventory Center: C:\Program Files\Oracle\Inventory

    from: n/a

    OPatch version: 11.2.0.1.1

    YES version: 11.2.0.2.0

    YES location: * ORACLE_HOME * \oui

    Location of the log file: **ORACLE_HOME**\cfgtoollogs\opatch\opatch2015-04-09_16-27-49PM.log

    History of patch file: **ORACLE_HOME**\cfgtoollogs\opatch\opatch_history.txt

    Failure of the load of the inventory... OPatch failed to load the inventory for the given Oracle Home.

    LsInventorySession failed: LsInventory failed to create the log directory * ORACLE_HOME * \cfgtoollogs\opatch\lsinv\lsinventory2015-04 -.

    09_16-27 - 49 PM .txt

    OPatch failed with error code = 73

    Can someone please help me solve this problem?

    Do I need to install the last opatch utility?

    Hello

    This error message " LsInventorySession failed: LsInventory failed to create the log directory * ORACLE_HOME * \cfgtoollogs\opatch\lsinv\lsinventory2015-04 - .

    09_16-27 - 49 PM .txt "

    indicates that you have a permission problem with your file systems: cfgtoollogs/ORACLE_HOME/opatch

    Check the owner of this file system.

    Kind regards

  • Failed to load the metadata server using GET_DOC_METADATA_INFO content model?

    Hi all

    I create connection in Jdeveloper to the repository of content both are 11.1.1.6.0 version. I'm creating RIDC Socket type Socket.
    everything by testing the connection I get under Error.UCM runs in other ways machine come IP. trying to connect from my local Jdeveloper.

    Test failed:
    Failed to load the metadata server using GET_DOC_METADATA_INFO content model.
    Permission denied. Address ' XX. XX. XX. XX'(IP) is not an authorized remote socket address. (IP replaced by XX...)

    Why his error.do showing that I need to put any changes of the UCM let me know problem question

    Please give me an idea about this error and the solution for the same.


    Concerning
    Siva sery

    To eliminate the first manifesto, see this post: fail to connect to the content if server use 'web' for the RIDC socket type and check that the other IP is allowed, amongst, IPs (you can use a mask, or type it directly) - do not forget to restart the server after the change.

    If this does not help, test, if other services such as DOC_INFO_BY_NAME can be called via RIDC, or if they have the same problem.

Maybe you are looking for