HP Deskjet Ink Advantage 1515: stop the test page printed for all-in-one printer, HP Deskjet Ink Advantage 1515
How can I stop my HP Deskjet Ink Advantage 1515 all-in-One printer to print a test page everytime I STARTED printing?
Hello JoshSimon ,
Welcome to the HP Forums.
I see that you have a problem with the printer printing before you print a test page.
If you turn off the printer at the end of the day, please do not. Turn the printer on/off will result in printing a test page. If you are concerned about the printer lost power, and that's why you stop, the unit actually built in sleep/stand mode that will kick in when you are not using the printer.
Once a print job is sent to the printer it then wake up and do the task at hand.
In addition, make sure you have the printer power cable connected directly to a wall outlet and not a bar/power strip. Here is a document that uses a LaserJet printer for example, but it is intended for HP products in general. Please click the link which explains the problems when connected to an uninterruptible power supply/Strip/surge protector power.
If troubleshooting doesn't help not solve your problem, then I would say call the HP Technical Support to see all the other possibilities for you. If you call in North America, the number is 1-800-474-6836 and for all other regions, please click here: click here.
See you soon,.
Tags: HP Printers
Similar Questions
-
Failed to check the ink levels or the test page printed. printer Deskjet 6940
I can't check ink levels or a test page to print on printer Deskjet 6940 with Windows 7. There seems to be no option available.
Hello
Visit this link,
http://support.HP.com/us-en/document/c01296414
This is the page I allow you to print. Ink levels have to be there. Its bars of threshold of 51 and 61
-
hp4315 is in 22 minutes to print the test page. resolution of the problems of detection without problem. Using Windows 7 64 bit
This is caused by the failure of one of your cartridges. I'm not sure that the Officejet 4315 will print with a single cartridge installed, but try the following: remove the black print cartridge and print a test page. The printer prints at a normal speed? Is therefore the black cartridge was the issue and needs to be replaced. If it isn't then, put the black back cartridge in and remove the color cartridge and the test page printed. If the printer now prints speed the color cartridge is responsible and must be replaced.
-
After each print job, I always get a 'test page print '. I don't know how to stop printing. Any ideas?
Hello
· Using the HP Deskjet 5150 color inkjet printer or all-in-one printer, HP Photosmart C5150?
· Were there recent changes made on the computer or the printer before the show?
Follow the form of measures troubleshooting article and check if that helps.
Printer in Windows problems
http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows
See also:
Resources for the resolution of the printer in Windows XP problems
http://support.Microsoft.com/kb/308028
If the problem persists I suggest you contact HP support for help:
-
DeskJet D2360: Deskjet 2360 - prints wrong colors, even if the test page seems well
In 10 (64-bit) Windows, Deskjet D2360 prints the well test page, but the colors aren't any application (documents, photos...). Cyan looks like dark blue. Green also appears dark blue. I just updated the drivers from the HP website, but the behavior remains the same.
The problem appeared after Windows 10 updates (January 2016 and later versions).
Print and Scan Doctor couldn't fix it. Help!
(Suggestion: If your printer prints the test page, why not propose an image file with what the test is supposed to look like.) This is useful especially to confirm colors. If I have a print test and see a few squares of color, how could I know if they are the correct colors?)
After a long period of frustration, I found the non-professional magic solution:
Print a test page with HP print and Scan doctor. Once the problem is resolved.
-
My printer is Dell v515w Red
Currently, I can only test pages print. When I try to print from any other application, I get this error-
Host of the print driver for 32 bit applications has stopped working
Signature of the problem:
Problem event name: APPCRASH
Application name: splwow64.exe
Application version: 6.1.7600.16385
Application timestamp: 4a5bd3ca
Fault Module name: ntdll.dll
Fault Module Version: 6.1.7600.16559
Timestamp of Module error: 4ba9b802
Exception code: c0000710
Exception offset: 000000000006e3f9
OS version: 6.1.7600.2.0.0.768.3
Locale ID: 1033
Additional information 1: 3edf
More information 2: 3edf0feac74021b377b392a0115d74c0
Additional information 3: bf41
Additional information 4: bf41409fee27240aa0d3cd0ee9bc9fa9
I've updated through microsoft and dell and some solutions.
What is a dell problem or a problem of microsoft?
My features are-
Studio Dell XPS 1645, Win7 64 bit, IE8
extacy1375,
Unplug the printer.
Uninstall the printer.
Restart your computer. Make sure that the printer is deleted. Driver Manual printer removal
Download 64-bit Vista drivers and save them on your desktop. Install the drivers for Vista 64 bit in compatibility mode.
Links to the 64 bit Vista drivers are to...
Wireless printer Dell V515w All In One Printer - owners (RED) wire
Rick
-
HP Deskjet D1530 print does not correctly but the test page is awesome
After using the printer has multiple pages, the following pdf, I tried to print print with less and less visible text and clear the text boxes that are visible are generally at the bottom half of the words. I printed the test page, but it comes out perfectly clear. I tried to print other documents, but they are all in print barely visible in the same way. Suggestions?
My bet would be a problem with your color cartrdige. (Some programs such as Adobe Reader can send data to the printer as color to make black). Print a page of diagnosis as described in this document or the check ink levels in your color cartridge.
-
How can I keep my HP1510 all-in-one to print the test pages as much?
How can I keep my HP1510 all-in-one to print the test pages as much? My printer is connected to my laptop, and it seems that whenever I disconnect, want the printer print a test page when I reboot. I don't know where the option is to disable this option.
Pages are likely alignment pages. When a new cartrdige is installed the printer will print an alignment page which should be placed on the scanner glass and press the button of scan to complete the alignment process. If the alignment is not complete it will repeat when the printer is powered suite or maybe at the end of print jobs.
The alignment page will stop printing when the alignment process is complete. See the page here for more information.
-
HP Photosmart C4795 of only printing blank pages - including the test page.
I have a Macbook Pro IOS 10.7.5.
WARNING - I have had this printer for about 2 years and it is literally never worked for me. I finally gave up and its been sitting in a closet. I really need to be able to print at home again this is why I'm asking now.
I have tried all troubleshooting ideas given to me by the HP site and nothing works.
The printer behaves like its printing but springs from the white pages, including the test page. I connect via a USB port, so I'll make sure that I had a strong connection. I have new black and color ink cartridges.
Help, please!
I would check the printer without connecting to a computer first.
Do not copy work? If copy does not ink on paper, you can be dead cartridges or blocked. There is an option in the menu Tools 'cleaning print head', if that is not printed a page, the cartridges don't work. -
officejet1100 HP does not print the test page
7 the window running. The machine is hp deskdjet 1100, unsupported except in compatible file. Installed compatible driver hp dj 1000. Screen printer. Been the pillar for the test page. tell it to print the test page, order goes into Lake. Printer does not print.
Hello
As OEM HP is responsible for the good operation of the printer and their
drivers provided. Check with HP support, their documentation online and
drivers and ask in their forums.HP - DeskJet 1100 c - there is no Windows 7 drivers so check with HP
Support and their forums to see if there are work-a-rounds.
http://h20000.www2.HP.com/bizsupport/TechSupport/DriverDownload.jsp?lang=en&cc=us&prodNameId=14499&TaskID=135&prodTypeId=18972&prodSeriesId=25525&lang=en&cc=usHP - DeskJet 1100 - support
http://h20000.www2.HP.com/bizsupport/TechSupport/home.jsp?lang=en&cc=us&prodTypeId=18972&prodSeriesId=25525&lang=en&cc=usSupport HP & drivers
http://welcome.HP.com/country/us/en/support.htmlContact HP
http://welcome.HP.com/country/us/en/contact_us.htmlHP forums
http://h30434.www3.HP.com/PSG/=============================================
The main issue is probably the drivers, but these can help:
Add or remove a printer
http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printerSolve printer problems
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problemsOpen the printer Troubleshooter
http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-TroubleshooterFind the manufacturer's Web site
http://Windows.Microsoft.com/en-us/Windows-Vista/find-a-printer-manufacturers-websiteFind and install printer drivers in Windows 7
http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-driversI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
Will not print with the exception of the test pages
I can't print any document (PDF or Word format) but all the test pages will be printed. The document will show less than a second in the print window then disappears. It doesn't matter if I try to print wireless or I plug the USB printer on the computer. Also, no Google Cloud Print will print.
The printer is a Photosmart C7280 all-in-one and computer is a HP Compaq nx7400. I use an operating system of Windows 7 with Office 2007.
Welcome to the joalrabr forums,
I understand your Photosmart C7280 print not since your connected PC or wireless USB however, it will print the pages of the test directly from the printer itself.
First of all, I would like to run the HP print and Scan Doctor. I hope the tool will fix the problem. If it cannot, it will tell you the problem.
Please let me know the results!
Happy Monday
-
1025nw Jam in Drum area - attention LED still flashes and cannot print the test page
My Laserjet PRO CP1025nw is only 3 weeks. Everything was normal until I met a paper jam today. I removed the damaged document by opening the back cover and the piece of paper remaining from the feeder. But still, printer flashes driving caution.
I turned the printer off and then back on and tried the instructions in the user manual to clear paper jams. When I turn on the printer, all lights are turning ON one (as the normal boot sequence) and then warning led flashes. I couldn't hear any engine wheelchair or his mechanics during this process. Web server page printer (with wifi) showed the status of the printer as "jam in the drum area. I removed and re-inserted Imaging drum by following the instructions to replace the imaging drum.
What I see after turning on th eprinter is just attention light flashing and I can't even print a test page. I don't hear any rotation of the engine sound of the printer. Pleas help me out of this problem.
I solved the problem myself. Although I couldn't find any piece of paper left by normal inspection of the outside of the printer, I removed the Assembly / separation and roll pick-up from the input tray to find a small piece of paper remaining on the paper sensor flag. Very hard or literally impossible to find something in this place by the normal health check.
To eliminate the epickup roll pre-assembled under th eprinter th, I removed the right side panel and the left side panel for th eprinter. I was happy to see the piece of paper that has ruined my day quiete. Deleted and everything set up as before and successfully took a test page print.
Thank you for repair of HP, which led me to get inside the printer.
-
Why an I get the test page yellow and black with each print job. I have a HP PSC 1350
Why an I get the test page yellow and black with each print job? I have a HP PSC 1350
Hi - I assume that the page that you see printed is the alignment page. This happens usually if the alignment process has not been made. All you should have to do is take the printed alignment page and place it face down on the scan scanner glass and press. Who must complete the alignment process and eliminate the page printing every time. If you have problems, try following the procedure described in this document.
Hope that helps.
-
OFFICEJET V40: HP OFFICEJET V40 DOES NOT PRINT THE TEST PAGE
Printing a test page only prints the top line of the test page.
This printer work with Windows 7 for me.
I tried to print a document in word with the same result (only the top line of the document will be printed - and errors)
UNINSTALLING THE SOFTWARE OF PRINTER DRIVER THROUGH THE DEVICE MANAGER SOLVES THE PROBLEM.
I HAD TO DO SINCE THE DEVICE MANAGER - JUST REMOVE THE DEVICE FROM THE CONSOLE OF THE MACHINE
SEEMS NOT TO DELETE THE DRIVER SOFTWARE. AFTER RESTARTING, I RAN THE HP INSTALLATION WIZARD
THAT FIXED THE PROBLEM AND TEST PRINT WORKS Thank YOU!
-
HP2710 print jobs stuck in the queue even if test page prints
I have a HP Photosmart 2710 all-in-one printer attached via the USB port of a laptop ASUS G73Jw running under Windows 7 64-bit. The printer worked fine with a Toshiba laptop running Windows XP 32-bit only. But now cling all the documents in the queue if thay are Word, pdf or Notepad. I tried everything I could find on the HP forums. I downloaded the last software update. I ran the diagnostics HPPDU utility. After that I ran this utility test page prints fine, but nothing else gets stuck in the queue. I obeyed different instructions to disconnect and reconnect the printer, do a reboot etc after running the diagnostic utility. I tried other 'solutions' various users have suggested, including disabling bidirectional printing, restarting the spooler service and directly without the print spooler. Nothing works.
Given that I can print a test page I doubt that it is a mechanical problem. I suspect some sort of driver incompatibility. Because I downloaded the driver more once in frustration I think there could be pieces of drivers still present, although I can't view them with the uninstall command or the Device Manager. In fact, I can't find any file with any HP device software. Maybe it's because the driver is downloaded directly from Windows 7 when you do a Plug-and-Play.
There are a large number of driver files under everything in the printer properties. But I don't know which driver files should be there.
I'm about to trash this printer unless someone has an idea what to do.
Help!
It could cause a conflict if the printer is stuck which occupies the port because it could block all communication with anything that is not this printer. It may be something wrong with the way that ASUS manages virtual USB drivers, but I have not heard anything. You might try to give them a call if you're really curious, just to see if they know anything.
Maybe you are looking for
-
-Very well, so a month ago, I downloaded paint SAI. It was clearly a mistake, since now whenever I open a new tab in firefox, it goes immediately to findr, so now I can't restore my tabs, or move on it. I thought that download a manual session Manage
-
No audio on web pages using Firefox. I've updated all the plugins, check the volume level of the mixer, latest versions of Flash, Java, Quicktime. I uninstalled Firefox, even deleted personal settings, delete directories in the folder program files a
-
Team Hotmail &#60; _ @ _. _ &#62;
The team RECEIVED a Hotmail EMAIL * address email is removed from the privacy *> WITH A PDF FILE JOINT. I DID NOT OPEN THE FILE. WASN'T SURE IF IT WAS SAFE. THERE IS NO ADDITIONAL INFORMATION IN THE EMAIL SENT. THE SUBJECT LINE SAID: RE: update acco
-
IDT high definition audio CODEC. Error: the device cannot start (code 10)
Original title: IDT high definition audio CODEC My Dell Latitude D620 has no sound control or (other than the system beep) volume, the volume control buttons do not work. When I uninstall and reinstall the IDT, I get an error message - "device cannot
-
Impossible to update Windows XP Pro SP3 x 32
When I try to update W XP Pro I now have a message asking "I want to install this program?" with two buttons, "Install" & "do not install". The program name is "Microsoft Update". By clicking on buttons causes the button appear depressed but is not c