HP Deskjet Ink Advantage 2545: HP Deskjet Ink Advantage 2545 does not print Cyrillic

Similar Questions

• DeskJet D2330 - powered but does not print

  Hello...

  My Deskjet D2330 worked fine yesterday. When I tried to print today, the green power light was turned off

  and do not print. I checked all the strings to ensure that they were not in bulk.

  I turned the main power on and outside... nothing. I have enough ink and paper.

  And the cartridge, although it is easy to move by hand, does not reset when I turned on the power.

  Do you think he burned?

  OR?

  Thanks for your help.

  Hello again, xxyyzz,

  I'm sorry to hear that your printer is now show 'offline' and you cannot print. I have the instructions step by step you requested below. You will need to select your operating system first to start.

  I hope this helps!

  "Printer is off-line" Message appears on the computer and the printer does not print

• HP deskjet series of 1510 does not print

  We recently mloved to la Gomera (Canary Island) and there I bought an hp deskjet printer 1510. It will not print when connected to my laptop, also a HP with Windows vista, although it is connected, is on and is the default printer. I tried everything the doctor print and scan suggested (like cutting the fire walls, check print ooler, reinstall the driver and software etc.) and everything that I found in the taking in charge of HP. still does not print. When it is connected to our other laptop, HP also but with windows 7, it works fine. The only thing that I managed to print is a diagnostic page but it gives only numbers and letters like SN = CN39a19mmp05yr 21 PG = 81 12 BY =-5 yr 22 FB = 0/0, etc.. Nog is far from help me :-(.  someone knows how to fix this?

  Hello

  Please try the below mentioned steps...

  Click START > device and printer > add a printer > add a local printer >

  (if the printer is connected with USB)

  Select "Use existing Port" then Virtual USB from the drop-down menu, click on NEXT, in the production list, select HP / Hewlett-packard and in the right pane, select Deskjet 6980 and finish the wizard

• H470 printer: HP Officejet H470 - left, ink blinking and does not print

  I have a HP Officejet H470 mobile printer.  I have a problem with the left blinker light ink (color ink). This printer should always print with black ink only, but there is a problem - left flashing and when I try to print something happened any reactions...

  I followed the steps of troubleshooting at http://support.hp.com/us-en/document/c01182351 but it does not solve the problem. I cleaned the contacts on the cartridge and the printer, I bought a new color cartridge but I still have the same problem. Can you help me?

  Hey @miamiparis,

  Welcome to the Forums of HP Support!

  I see that you have some problems with a cartridge error on your Officejet H470 printer. I can help you with that, but it seems that you have done all the troubleshooting steps available for this issue. If this is the case, the printer needs to be replaced. You can contact the HP Support by clicking on this link and fill out the form below to discuss the options based on your warranty.

  Please let me know if you are able to reach a resolution with the support. If you are, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• HP Deskjet 1515: HP 1515 does not print

  Hello everyone,

  first of all, sorry for my bad English, it is not my mother tongue, but I hope that you will understand me.

  Today I bought a Deskjet 1515, installed correctly (I think...) and the test page was printed without problem. But, any other document may not be printed, or office, Adobe or a web page. I started troubleshooting of Windows but did not find the problem. In addition, the doctor HP Print and scan was launched, there is also no problem. writing the device functioning, communication is ok, and the test page can be printed. All other functions maintenance works (cartridge settings could be printed, cleaning, etc.), should also print from other programs.

  When I launch a print, the print icon appears in the right corner of the Board, but when I take the mouse over it, wrote "0 document under impression" (or 0 doc is in the queue? I do not know the right translation) and after a few seconds it disappears from the status bar.

  I tried to restart the computer, remove and reinstall the driver on the CD, plug into the connection of the cable for 30 seconds a card, downloaded and installed the latest driver HP...

  I'm out of ideas...

  You have any other advice?

  Thanks in advance.

  #remark: in the evening, I found, but I can print from ADobe and jpeg (all scanned documents can be print), MS Office and a page Web cannot. Always at a new facility, I can print the page test, but after no its software...

  Hello @elzolee,

  Welcome to the Forum from HP Support.  I hope you enjoy your experience here.

  I understand that you are unable to print from Microsoft Word and on the web using your all-in-one printer HP Deskjet Ink Advantage 1515.  I want to help you with this.

  Thank you for all the details you provided by listing the troubleshooting steps you have tried.  It helps me to determine the place where from there.  Accordingly, I recommend you clear the Temp on your PC folder and install another driver print.  Try the steps presented by my colleague @X-23:

  Step 1: Clear the Temp folder:

  1. Open your Start menu and in the box "search programs and files", type %temp% , and then press enter.
  2. When the Temp folder opens, select Ctrl + A at the same time on your keyboard
  3. Once everything is highlighted in the Temp folder select "delete" on your keyboard to delete the files in the Temp folder. No files and folders on your computer will be deleted. This only deletes temporary files. If a file is always be used by a program on your computer, you'll be up the pop to 'jump' the item.
  4. Once the temporary files are deleted to close the window
  5. On your desktop, right click on the recycling bin and select empty recycling bin

  Step 2: Adding a driver replacing:

  1. Click on the Start menu
  2. Select the devices and printers
  3. In the devices and printers folder right click on your HP Officejet Pro 6830 and left click on printer properties.
  4. Left click on the Advanced tab
  5. Left-click on new driver
  6. When the new driver window just press 'Next' until you see a list of manufacturerson the left and a list of Printers on the right.
  7. Select HP as the manufacturer on the left
  8. DeskJet 9800 select the printer on the right. If Deskjet 9800 is only select "Windows Update" at the bottom left and once the update has been completed, you will be able to select Deskjet 9800.
  9. After selecting Deskjet 9800 hit next complete the new driver Wizard
  10. Under the printer properties window, select "Apply", but don't hit not OK
  11. Select the general tab
  12. Rename your printer in HP Officejet Pro 6830
  13. Click OK
  14. Finally, right click on your HP Officejet Pro 6830 one more time and left-click on Printing Preferences
  15. Left click on the paper/quality tab
  16. Left click on the drop down menu 'Normal' for quality printing at the bottom right and change its normal fast
  17. Press apply and OK

  Source

  Try to print from Word, and also in your web browser of choice.  Please let me know the results by responding to this post.  If I helped you to solve the problem, feel free to say "You rock!" by clicking the "Thumbs Up" icon below and by clicking to accept this solution.

  Thanks for posting in the Forum from HP Support.  Have a great day!

• Full view ink levels but does not print magenta and cian not on Officejet 6500AA.

  Just installed new cartridges of magenta and cian in my Officejet 6500 a.  Ink levels show as complete but no cartridge is printed.

  You still have the old cartridges?

  If Yes, try to install and see if the same issue exists. If they still have enough ink to be seen on the page, so it may be a problem with the print head.

  You can try the troubleshooting of this article steps to clean the print head and it can solve the problem:

  http://support.HP.com/us-en/document/c01661383

  I hope that helps!

• I changed the ink in my printer, it worked twice after that, but now the ink lights. Does not print.

  The printer is an EPSON multy 3 in 1 NX100series Stylu.

  Contact Epson or check their support website to see what could be the problem.  This indicates a hardware problem with your printer, not a Windows problem.

• Printer was working fine, a lack of ink, he succeeded. Now the printer does not print.

  Printer was fine, a lack of ink, replaced ink, now the does not print from the computer.  It will print a test page for the printer.  He do not print on the computer.  Thanks for your help.  Max

  Hello

  You must check with assumption of the manufacturer of the printer, the online documentation and drivers and ask to
  their forums (if any) on the known issues.

  Not really a Windows problem.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• HP deskjet 3520: black ink does not print

  My HP deskjet printer that is 2 months warranty, that I recently bought a new HP cartridges for now will not print black (other colors are all very well).
  If have spent hours and hours trying to solve this problem, following all the advice on this forum - believe me, I tried to clean the vent system, cleaning of the print head. The really frustrating thing I had just bought new ink for the machine $60 thrown and now my printer does not print. I'm out $60 and I need to buy a new machine very frustrating and this machine is used very little only occasionally to print some checks and a few emails.

  I promise you that this HP will not be my next choice.

  Tammy

  The message here suggests to call HP Support even if your printer is no longer under warranty if the standard troublehsooting steps do not resolve not black not print on your Deskjet 3520.

  If you are in the USA call 1-800-HPINVENt or Canada, also see details here.

• HP Deskjet F2410: The printer does not print

  I have a problem with my printer after reformatting my PC.

  Product name: HP Deskjet F2410 not

  Operating system: Microsoft Windows 7 (64-bit)

  Drivers and software are already installed.

  I have the new black and color ink cartridges

  When I send command my printer does not print but in the Panel, devices and printers, in "see what's printing", everything is correct written: the Document name, status, Pages, submitted, Port. ""

  Is it possible that my printer has stopped working properly because I changed the operating system from 32 to 64-bit?

  Thanks in advance for answers

  Elena

  Hi @Elena_Kh,

  Welcome to the Forums of HP Support! I see that you have recently formatted your PC running the Windows 7 operating system and now you cannot print to your F2410 not HP's Deskjet.

  I would like you to follow the steps below:

  Please, try disabling your firewall and perform a clean boot. Now, follow the steps below:

  1. disconnect the USB key if you use a direct connection.

  2. remove the software HP Deskjet F2410 not to uninstall from the control panel of your computers an option of the program.

  3. restart the computer.

  4. make sure that all them that software Deskjet F2410 has disappeared from the list of programs, but also your HP folder listed under all programs in your Start Menu.

  5. now, go ahead and download the software and drivers for your Deskjet F2410 (DO NOT connect USB until the software prompts you to):

  HP Deskjet F2400 all-in-One series Full Feature Software and Driver

  6. go ahead and print a test page.

  7. If you are unable to print a test page, please run HP print and Scan Doctor > www.hp.com/go/tools

  -It was designed by HP to offer users troubleshooting and problems of the functionality needed to solve many common problems experienced with HP print and scan the products related to Windows computers.

  Please let me know if it was successful!

  Thank you for being a part of the community of HP. Please let me know if this helps solve the problem by marking this message as "accept as Solution" . If you need more assistance let me know and I will gladly do whatever I can to help. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

• DeskJet F4480: full black print cartridge still does not print black. Colors OK.

  What the title says. All of a sudden my Deskjet F4480 does not print black. All cartridges are almost nine (changed recently, bought at Staples). Colour printing is OK. Print a page with black text and results in only the images printing color images. I only went through all the steps of cleaning cartridge several times, no difference. There is no error message, just black not appear do not at all.

  And... Here is the solution.

  Funny how I found an explanation of the problem and how to fix it on a different printer manufacturer's Web site, but not on HP... But I digress.

  The black cartridge has been blocked. The way of difficulty is:

  1. remove the faulty cartridge from the printer.

  2. place a small amount of boiling water in a cup (about 1/4 in.) and dunk of the print head (the part where the ink comes out) in warm water for a minute. Do not immerse the entire cartridge in hot water, just the print head.

  3 take it out, pat against a paper towel, observe the model ink left in the cartridge on the towel. If too little / interrupted, dunk again in hot water for another minute, pat again. You want to get an unbroken line of ink through the length of the print head. Repeat as needed (I did 4 times total).

  4 cartridge Pat dry everywhere, put it back in the printer, run cleaning cycles (1 - 2).

  5. If still not good fixed, take out the cartridge and repeat 2 (I had to do it again).

  You will lose little ink, cartridge of bad and good a well (you can not run cycles with only 1 cleaning cartridge), but at least you won't have to throw a nearly full cartridge.

• HP 3520 while a printer does not print black after changing ink and cleaning head

  My 3520 printer all-in-one will not print black after cleaning print head and replacement of black ink. the printer is a little older than a year. All printing inks.

  Hi handytim1,

  Welcome to the Forums of HP Support! I see that you are facing some print quality problems on your HP Deskjet 3520, you cleaned the printhead and replace the cartridge without success.

  I would like to continue you here: printer does not print black ink or color of ink or prints blank Pages, I understand, you may have made some of these steps already but I need you to complete all the steps in order to solve the problem of the missing black, you encounter.

  Please note: there are three stages of print head cleaning. Three steps if necessary. If the print head is badly clogged, it may require another round of cleaning. If so, wait 30 minutes after the last step of cleaning (third) to start the first stage of the cleanup process.

  Let me know the results, I'll watch for your reply.

  Thank you

• I have windows 7, my HP deskjet printer does not print the colors I changed to another laptop with win 7 = no colors which, in windows 7 64 cause3s this

  I have windows 7, my HP deskjet printer does not print the colors I changed to another laptop with win 7 = no colors which, in windows 7 64 cause3s this

  Display uppercase makes reading difficult.

  Have you checked the printer properties settings?

  It could also be due to a problem with ink cartridge

  Used HP diagnostics or printed the test page for HP?

  Its nothing to do with win7 the printer settings are taken from the printer to the driver

• HP Deskjet 990cxi does not print color

  HP Deskjet 990cxi had for many years with no problems.  Once the color has begun to come out in pink, I replaced the cartridge from the printer and now it does not print in black and faded rose.  I replaced the cartridge with an another new and still the same results.

  Can someone help and let me know what I need to do?

  Hello LoBaan,

  Welcome to the Forums of HP Support! I see that you are not able to print in color on your HP Deskjet 990cxi, you replaced the cartridges without success. I would like that you start here: lack of color, wrong color or cast in print, follow these steps to resolve the problem you are experiencing.

  Let me know the results, I'll watch for your reply.

  Thank you

• HP ENVY 4504: HP ENVY 4504 does not print black ink even with full cartridge

  Used by my office printer is not printing black ink. It does not, it is out of black ink, but anything on a page I print requiring black ink is absent. I checked the cartridge to see if she had missed and the printer was not to tell me, but she didn't. I also tried to put in a new black ink cartridge, but it wouldn't print black to help anyone.

  There is no problem with color printing and the problem started only today. The black cartridge is certainly compatible with this printer as it had been good working with it so far.

  We bought this printer less than a year ago now.

  Until outside to change the cartridges I also turned the printer off and on again, but neither helped.

  I would appreciate greatly any assistance that we currently only this one printer at the office and we rely on it for a lot of work.

  Thank you very much.

  Try here.

  http://support.HP.com/us-en/product/HP-envy-4500-e-all-in-one-printer-series/5304875/model/5368526/document/c03768188/

  Ink cartridge information after doing all the recommendations of HP:

  Once you check the vents turn the cartridge and check the underside near the opening of the ink.  They can be of four plastic tabs near the opening are resurrected.  Make sure that the raised tabs are removed and made flush with the body of the cell.  This will cause the cartridge do not do sit properly in all of the print head and cause air that are expected.  This will affect especially the black ink cartridge.

  In particular, let us know if you find the above to be true.