HP Deskjet J110: 8.1 for Windows does not recognize Deskjet J110, does not print. Drive of reloads.
DeskJet J110 does not test page print. Removed the printer and reinstall, USb not recognized. Charges such as LPT1. Tried unplugging, reboot and reconnect. Same result.
Hello Floadnar,
Have you tried with another Usb cable? DC said that "usb not recognized it. You should check also Device Manager for universal serial bus drivers. Finally, you can try to connect both usb cable to check the work of regular printer usb socket or not. you don't need to install the driver. Simply connect the usb cable between the printer and PC. If both USB works with off problem that should not see the unrecognized Usb device message.
Tags: HP Printers
Similar Questions
-
My download is for Windows, OSX not :(
What should I do once the download for Windows and not a Mac system? I am trying to download my purchase of Photoshop Elements, but I can't open it because the file type is not supported.
Or maybe just download the Mac version here
-
File server for Windows does not work after security update
I just upgraded the security update that was released last week and all of a sudden the computers windows cannot access the server. I'm under 10.11.6 and everything was great until we started windows computers today. They can ping and access the internet, but they cannot access SMB on the server.
Macs have no connection problems in the SMB and AFP.
Any ideas, what has changed? Users of server are all still there and it seems like it should work. I can access the web page of servers too.
Make sure you are including the domain in the user name when signing in. for example USER: groupe_travail
Also, check that your windows machine has the correct set of LM compatibility level. For El Cap servers must be set to 3.
Follow the instructions below to change the Windows security settings to allow Windows SMB connections.
- Click on the Start button and in the bottom search bar, type regedit . Select search results regedit and the registry opens.
- Using the folders on the left side of the screen, navigate through the tree to the following location: \HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa
- In the right window, find the following DWORD value: LmCompatibilityLevel . If it exists, double-click it and set the value to 3 (in decimal). If it does not exist, right-click in an empty space in the right part of the window and create a new DWORD value called LmCompatibilityLevel and set its value to 3 (in decimal).
- Restart the computer.
- Re-try to connect to the server via the workstation.
NOTE: The versions Home of windows may not the ability to set the LM, and unfortunately I have not found a way around that.
-
service pack 2 for Windows does not install
Hi, can someone help, I'm not very good with computers but I can't get the update of windows to complete and depends now, my printer does not computer is running really slow, bought a registry fix program did make a difference ruling ever, I tried all the suggested solutions and none have worked. Help, please!
Registry "fix" programs do more harm than good.
Largely steer away from them.
https://support.Microsoft.com/OAS/default.aspx?PRID=13014&Gprid=582034&St=1
Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for SP2 is valid until August 30, 2010.
Microsoft free support for Vista SP2 at the link above.
See you soon.
Mick Murphy - Microsoft partner
-
Control of the Xbox 360 Wireless for Windows does not work with COD WAW
Hello, I use the X box for windows pc controller. I have Windows Vista 64 bit installed, and I am trying to play Call of Duty World at War; However in the gameplay, the game does not respond to any controller input. Where this happens, it is indeed the controller wireless for windows with the wireless adapter and yes I checked for the last update and I.
O.S Windows Vista, 8 GB of Ram, Intel Cor 2 extreme quad, HP laptopHello dtorres17.
Unfortunately, Call of Duty World at War doesn't support any input other than a mouse and a keyboard controller. Paul Smith - MVP for Windows desktop experience... I crawled off NNTP - for now. Detachment Aldershot, United Kingdom. On the internet at windowsresource.net and dasmirnov.net. Please post back to let us know what works and what does not. :-)
-
I just upgraded to window 7 for windows 10. 6 Lightroom does not start because it cannot open the catalog or one of my backups
Yes, once the user account is the upgrade to windows 10 have permission on the folder of photo issue, which prevents the Lightroom to create the necessary temp file when the catalog is launched.
This is the reason why I asked to copy the catalog file to another location to narrow down the reason for the problem.
Thank you
-
Installation of Web premium CS5 for Windows does not
Hello
I have changed my PC and uninstalled the Web Premium CS5 for Windows on my old PC.
I went to the LWS site to download installation (zip and exe) on my new PC (Win 7) and launched the exe files.
Files have been decompressed, but when the process terminates it does not launch the installation at all. Nothing happens!
Please could you help me?
Thank you very much in advance :-)
Thanks for your help.
When I checked the log files, I realized that it was not all newspaper!
If the exe has not made the installation at all.
I therefore uncompressed manually the zip file and manually installed as well.
It worked! :-D Thanks again
-
Updating Windows 8.1 KB2919355 has proved to be extremely problematic for me. When he was released at the beginning of 2014 that I was not able to get installed it with the exception of two occasions, the first being several months ago and the second time, a few days ago. I have constant pain to try to get the update of KB2919355 until recently. What finally got the update installed was opened as administrator command prompt and type the following commands,
DISM/Online/Remove - Package PackageNameackage_for_KB2919355 ~ 31bf3856ad364e35 ~ amd64 ~ ~ 6.3.1.14
and then
DISM / online/cleanup-image /startcomponentcleanup
So now, the update of KB2919355 has been installed. Only one problem: like the first time I had the installed, Windows Update leave commissioning. As the HP splash screen that normally appears during the startup process appears after about 3 seconds, Windows displays an error Stop, and for a fraction of a second will display SYSTEM_THREAD_EXCEPTION_NOT_HANDLED error, which as I read, is related to the graphics drivers. The thing is, after the cancellation of the update (the computer in Mode safe start put Windows automatically uninstall the update and everything goes well after), then go in and uninstall the graphics driver, restart, reinstall the graphics driver and reboot again, and then reinstall the KB2919355 update, the problem recurs. I also tried to download and to install the new update of firmware for my particular DESIRE machine which was released a few days ago, but which has not helped either.
I'm really stuck. I looked up and down, and I scoured Internet for anything that might help. I need to update KB2919355 be installed because without it, I can't book my free upgrade of Windows 10. This laptop is about 2 years and a half old now, so it fulfills all the prerequisites for Windows 10.
Please do not suggest that I do a Refresh of the system or a system reset, as I have no way to back up my programs, that which some I would not be able to reinstall because I have more drives for some of my programs. Also, I can lose to save him for some of my games.
When people ask me "What's up?", I always say 'the CAP '.So that seems to have solved the problem that is described in this post here. I followed the suggestion, which was to uninstall the driver, SPDT DuplexSecure (which has something to do with the SCSI devices, I'm not quite sure) using the SPDTinst (download here) and now it seems that Windows has started without crashing after installing the update KB2919355. I'll check my Windows Update history and see if it is there.
Low and behold, a year to be really behind value is ultimately more. I have successfully obtained the update of KB2919355 works on my computer.
-
DeskJet 3050 has: updated printer driver for Windows 10
I can't update my driver for Windows 10 (don't know if its 32 or 64 bit). HP support to download drivers updated seems unable to detect my printer even if bluetooth is turned on for both. Any thoughts?
Hello
First your printer doesn't have Bluetooth? How do you connect your printer now? Please download the software and the following driver and install on your computer:
http://ftp.HP.com/pub/softlib/software12/COL37193/al-109013-3/DJ3050A_J611_1315-1.exe
(Select Wireless when install.) Yet once it doesn't have Bluetooth).
Kind regards.
-
Receiver wireless Xbox for windows does not
Hello, I bought the receiver wireless for Windows and I made sure that all the drivers are up to date and when I go to the controller and receiver devices are able to be seen and when I try to use the controller for minecraft it doesn't, btw, my OS is windows 7
Try Xbox support:
http://support.Xbox.com/en-us/ -
Download ADE 2.0 for Windows - does not?
Hello
I downloaded Adobe Digital Editions 2.0 for Windows three times since the link to the Adobe Web site. She is 5.6 MB and downloads in seconds (as in the 3-5). I didn't run. I am logged in as administrator.
Either way, although it should not make a difference, I do this on Teamviewer 7.0.14563 on my dad's computer.
Any advice?
Thank you
I just managed to solve this problem.
On the application (.exe file):
Right click, select Properties
Downstairs, under the 'attributes', I found a security WARNING that prevented her from running. Click on the button and voila.
Hope that helps.
-
HP ProBook 450 G2: 8.1 for Windows does not start error 0xc000000f
My friend laptop has developed an error on startup after use of less than a week. The error reads as follows:
Windows could not start. A recent hardware or software change might be the cause. TI solve the problem:
1. Insert the Setup disk and restart your computer.
2. choose your language settings, and then click "next".
"3 click on repair your computer."
If you do not have your system drive contact your administrator
File: \Boot\BCD
Sastus: 0xc000000f
Info: An error occurred trying to read the boot configuration data.
My friend tells me that there is no external device attached to the laptop and it was working on Excel in time. Windows updates are being installed and the computer laptop ran out of battery and turned off. The computer is restarted, it got the error above.
System information:
Processor: Intel Core i5-4210U CPU @ 1.70 GHz
Current processor speed: 1700 MHz
Memory size: 8192MG RAM
BIOS date: 20/09/2014
BIOS revision: M74 worm 01.05
I have the DVD of the operating system, but when I select to boot from it, I get error saem. I tried the driver and application recovery DVDs, but that takes me directly in restoring to factory settings menu (I get no repair option). I tried to run diagnostics in the system (quick test). It starts with the battery and after about 10 seconds returns to the previous menu. Looking at the logs, it is said that the diagnistic was canceled, but certainly not by me. I managed to run individual tests on do as the battery, processor and hard drive and they all passed.
How can we try to repair Windows rather than recreating the image?
If you create a USB installer or Windows 8.1, you should be able to access the recovery options advanced that you will use the Safe Mode. If you are able to boot in safe mode, then using the system recovery may very well be the answer to the question of the BCD store that appeal to you.
Follow the instructions on the third party site to create a usb Windows 8.1 installer using a key of Windows 8.1 credits and use it to access the Windows environment.
https://www.WinHelp.us/non-destructive-reinstall-of-Windows-8-and-8-1.html#media
-
Windows does not recognize disks that are not 512 bytes per sector. Put readers at the point as unknown and I can't access it through the operating system. Is there something I can change to get Windows to recognize the disks that are not 512 bytes per sector?
Hello MetalRain,
Thank you for your message. Are you able to see the disks in disk management? Try the following:Click 'Start' > right click on 'My computer' > select 'manage '.Click on "disk management".On the right, you see your drive? If so, you can right click and it assign a drive letter.Now you should be able to close this window and you can format your drive to NTFS, you can specify to change the bytes per sector 512 if you wish as seen HERE.After assigning a drive letter, follow the steps below:Click "Start" > click "Run" > type cmd in the text field and press "Enter."In the command prompt, type format c:/FS: NTFS / a: 512 and press "Enter."Please let us know if it did or did not help to solve your problem.See you soonEngineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.
-
I upgraded from Vista to Windows 7
When I try to add the printer manually, I can't select all ports.Plug the printer causes Windows to try to install a driver, but it fails.
I suspect it was due to my University Pharos printing system. (It worked when I updated from Vista). After that I installed Win7 and started having all these problems, I was unable to uninstall due to errors of RPC ports. So I deleted manually and deleted all the registry entries.
Installation of a Brother printer still does not work.
Is anyway to reset all the settings of the printer? Wipe the slate clean? To restore all network ports?
Thank you!===
Edit: I read other entries... My Printer Spooler kept crashing before and I had to restart via services.msc
Also ran sfc/scannow without error
Edit: I have since deleted all other printers listed in the management of printing, restarted, but still there is no listed ports.OK, I found the solution. It turned out that all my print processors and ports have been replaced by the Pharos system (used by my University to charge for printing) DLLS. After the upgrade from Vista to Windows 7, it did not work.
They have become like this:
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Environments\Windows NT x86\Print Processors\winprint]
«Pilot '=' "PSS08B07."» DLL.
"PSDriverLink"="winprint.dll".
«C:\\Windows\\system32\\spool\\PRTPROCS\\W32X86\\PSS08B07 "=" PSDriverPath "."» DLL.[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Monitors\USB Monitor]
«Pilot '=' "C:\\Windows\\system32\\PSS08B05."» DLL.
"PSDriverLink"="usbmon.dll".
«C:\\Windows\\system32\\PSS08B05 "=" PSDriverPath "."» DLL.etc...
============
Manually, I changed ALL the print processors, drivers and ports in CurrentControlSet, CurrentControlSet1, CurrentControlSet2 to their original values and deleted the Pharos irritating ones.
i.e.
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Environments\Windows NT x86\Print Processors\winprint]
"Driver"="winprint.dll".etc...
restarted and it worked!
Too bad, the troubleshooting of Microsoft tool could not detect it.See you soon!
-
Need to create an installation media for Windows 8 (not 8.1)
I recently had need to reinstall Windows 8.1 due to a crash problem. I am now stuck because of the key, I bought and that a Microsoft tech I had a chat session with said use the button install Windows 8 on the following page:
http://Windows.Microsoft.com/en-us/Windows-8/upgrade-product-key-only
Well, it doesn't work and think that I have no internet connection then further down the same page is a link to create the installation media if you get this message but isn't only for 8.1 8. My key does not work on a clean install of Windows 8.1, which I already have a DVD. When I came across this problem, a comment I found said to use a generic key because the installation will not continue. Well, it worked, but when I tried to activate Windows with my purchased key, he acknowledged, because apparently my installation media was just 8.1 and not Pro that I bought. I asked the tech if I could use the web page above to reinstall Windows again and he said yes, but make sure you use Windows 8.
I saw the link above referenced in many places on this forum for people who want to install 8 don't not 8.1, but it leads to the same place, and when you launch mediacreationtool.exe, there are only options for 8.1.
I've been going round in circles on links to Microsoft, but the creation of the only available media seems to be to 8.1. Where can I download the installation for Windows 8 only media?
It shows how to use a WIndows 8 key to activate a Windows Installer Clean 8.1 in stage 4 information box in the blue link.
-
Drive DVD Toshiba for Windows XP, not only for Vista?
Hello
on www.csd.toshiba.com you can download
DVD Player Toshiba for Windows Vista (v1.20.10, 04/03/2008; 47 M)
but I use Windows XP - is there an available from Toshiba DVD drive?
Windows Media Player says it cannot decode my DVD - ok, I don't want to use the media player at all ;-)
Thank you much for the help. :-)
Hello
I think that the DVD from Toshiba drive was developed only for Vista
I found just that some versions for Vista 32 bit or 64 bit VistaSee you soon
Maybe you are looking for
-
Schedule e-mail alerts are sent to the wrong email address
When I create an event in the calendar, and then select a custom alert I chose a 'send e-mail' and select an e-mail address and a time so he could send the alert. Which works very well. The problem is when I get the e-mail, the e-mail address alert '
-
Using the SMU-6368 module, I would like to monitor the analog signal on multiple channels and trigger on several channels - relaxation and acquisition channels is all on the same device. Probably going to be sampling at 200 kHz and more. FM LV 2009 2
-
PCIe-653 x with DAQ traditional
Hello We want to update some of our network using a PCIe-6536. Is it possible to run this card with traditional NIDAQ? Does anyone have experience with the PCIe-653 x with DAQ traditional. Or is it only possible to run this card with DAQmx? Greetings
-
I HAVE A PACKARD BELL LAPTOP computer AND WHEN I START IT SHOWS the FOLLOWING ERROR, c:\users\andynew\appdata\roaming\newnext.me\nengine.dll HOW do I REMOVE PLEASE Original title: Please HELP I HAVE a START UP ERROR of
-
BELKIN ROUTER F5D8232-4 MODEL KEEPS RESTART AGAIN AND AGAIN
Hello I bought this model of router belkin N1 Vision F5D8232-4 Ver.1176ak long in December 2007 and it was working fine all these years. Today, 13 June 2013, I want to check the sessions, so I try to log in the password, but he refused me. I think I