HP deskjet printer 3630: change the warranty information

Similar Questions

• HP Deskjet 1000 printer - just changed the black cartridge for the first time and now it will only print first half of the page. Can anyone help

  HP Deskjet 1000 printer - just changed the black cartridge for the first time and now it will only print first half of the page.  Can anyone help

  Hello Gloria,.

  I ask you to execute methods in the following link and check if the problem is resolved.

  Solve printer problems

  You can also contact the manufacturer to find out how to clean the print head.

  http://h10025.www1.HP.com/ewfrf/wc/siteHome?cc=us&LC=en

  Please get back to us with the State of the question.

• Printhead 7510 gliding is more to the center when I open the printer to change the ink cartridges.

  I have an all-in-one Photosmart 7510. My slides print head is no longer the center when I open the printer to change the ink cartridges. It remains in place on the right side. I can't access the cartridges. Otherwise, the printer can print pages without problem - it is not blocked when printing. I have had this printer for during 9 months - it is a new problem.

  Thanks, but I returned the printer for a replacement - it was still under warranty.

• Office Jet 6500 will not print after changing the ink cartridges

  Office Jet 6500 will not print after changing the ink cartridges

  Hello

  This doesn't seem to be a problem with the printer itself and not Windows. I also suggest to contact the manufacturer. In this case, HP.

  Please see here: http://www8.hp.com/us/en/support-drivers.html

• HP laserjet p1006: does not print after changing the toner

  I just changed the toner. The green light is on, but when something I send to the printer to print, the orange error light. Before inserting the toner, I pulled the Strip in transparent plastic attached to an orange tongue and the black cloth. I tried to reinsert the toner and turn on/off the printer again. Help please if you can. Thank you!

  Hi @cindycb,

  Welcome to the Forums of HP Support! I read your post and to see that when you try to print after changing the toner, the Attention light. I would like to help you today. If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say thanks for my effort to help, click on the 'Thumbs Up' to give me a Kudos.

  Make sure all the orange, packaging material is to remove the toner.

  Make sure that the printer is connected directly to a wall outlet. (do not use a hub or a surge protector) This ensures that the printer is full on and can help this situation.

  Try and print a self-test on the printer hardware to see if it is a hardware or software problem.

  Open and close the cover five times quickly. It should print a page with black lines on it.

  You can find the flashing light distribution in this document and the right solutions for the reason that you are experiencing, lights blinking on HP LaserJet P1005, P1006, P1007, P1008 and P1009 Printer Series.

  You use Genuine HP Toner?

  Please let me know the result and if there is anything else I can help you. Thank you.

• Always said "Cannot print" after changing the cartridge twice.

  It is an Officejet Pro 8500 has.  He gave me a message saying "Unable to print" and meant to replace the following depeleted cartridges to resume printing.  I ran the animated illustration which stated that it was the cyan cartridge.  I got a replacement and installed.  He gave me the same message.  I got another cartridge and tried again, even once he gave me the same message.

  I am at a loss.  What should I try then operate?

  Here a link to a document that deals with the error you get on the printer. It will give troubleshooting steps to try to solve the problem it produces. I hope this helps.

  If you reach the end of the document and find that the printer still does not work. Sought to be the replacement of the product.

  If you are still in warranty, HP can replace the printer without cost to you. I'll link the information to get in touch with them below. The link takes you to a form to fill out. Once you fill it and she is treated, it will give you the printers warranty information, a file number and the phone number to call.

  HP Technical Support call case form:
  https://h10025.www1.HP.com/ewfrf/wc/phoneInput?cc=us&DLC=en&LC=en&product=5061082

• Cannot change the song information

  Before I started, my version of iTunes is 12.4.3.1 and it is installed on a computer running Windows 10. I recently got a new computer, I loaded all my music from a backup on an external hard drive folder. I made sure to check the option to create a copy of the files in the folder music/iTunes/whatever. All the files are copied as they should be and are not read only.

  So, the problem is that I can't get music to sort the way I would like that there. In order to make it all easy, I generally browse and edit the fields of the artist and Album to something standard, and if there is no recommended or invited artists I add in the name of the song. I can't do more and when sorting by artist it gives their own place instead of grouping under the main artists artist invited.

  I tried everything I can to change the info. Get Info page now shows the corrected information (artist and Album are identical), but show it again each guest artist as distinct from the main when artist I sort by artists and there doesn't seem to be a way to change this. Ticking the box "this is part of a compilation" does nothing.

  I am at a loss here. I've never had this problem with iTunes before. Is there anything else I can try that I have not already?

  Try to repair the security permissions for iTunes for Windows.

  TT2

• manuallly change the album information in media player

  UGH! I'm SO frustrated!

  I'm changing information that lights up for a CD I pulled it out of my Windows Media Player 11.05.  (Windows XP)
  I've corrected the titles of the songs and artists, but not the image. By mistake I clicked on 'done '.
  I need to go back and add 2 songs and artists.  Is there a way to do it, without having to start all over again?
  I already entered the information more than once that I want (about 4 times) and won't do it again. But there is no back button, so whenever I had to start. It's ridiculous!

  I thank very you much for any help you can give me!

  Hello

  Thanks for posting your question in the Microsoft Community forums.

  I see from the description of the problem, you have a problem with editing media information in Windows Media Player.

  I imagine the inconvenience that you are experiencing. We are here to help and guide you in the right direction.

  Windows Media Player relies on the media information to organize your library, so it is important that all items in your library have accurate and complete media information.

  I suggest you try the procedure described in the article and see if it helps.

  Add or edit media information
  http://Windows.Microsoft.com/is-is/Windows-XP/help/Windows-Media-Player/11/album-info

  Check out the link for more information.

  Add or change album art
  http://Windows.Microsoft.com/en-in/Windows-XP/help/Windows-Media-Player/11/album-art

  Let us know the status of the issue after you perform the troubleshooting steps. If you need help or information about the issue with the edition of the media information in Windows Media Player, I'll be happy to help you. We, at tender Microsoft to excellence.

• How can I change the system information

  I inherited a computer for my daughter in law with XP Home OS on it. Can I change the operating system information easily?

  If you mean 'Owner' and this information, Yes

  However, what you need to do as far as the account (username) is conerned, it is create a new account in any name you want, and then delete the old - go to control panel, user accounts.

  This avoids difficulties alter on if you siply change the username in use.

  After the back if you want more details on how to change the 'holder' (that long because I did, I forgot!)

• Can not print and change the homegroup password

  Original title: Windows 7 HomeGroup

  I tried to view and print the homegroup password, but the button would not work.

  Also I tried to change the homegroup password, but the button does not work either.

  I'm trying to connect a wireless device
  "Acer Netbook" to my computer.

  Help, please!

  Hi Moneyman25,

  1 you get an error message when trying to connect a wireless device?

  We recommend that you disable the security temporarily software and check if the problem persists. If you change the password, then change the security settings.
  See turn off the antivirus software

  Note: Be sure to activate security software.

  For your reference:
  1 see where can I find my homegroup password?
  2 see change a homegroup password

  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to change the country information in the Adobe account

  While the new annual subscription upgrade/purchase my mentioned country is USA & it does not change; He said assistance contact for change in countries; what needs to be done to change the information on the country

  Hello

  Please see change the country associated with your Adobe ID

  Kind regards

  Sheena

• How to change the authorization information. If I have 2 accounts with Adobe?

  First of all Hello to all,

  The issue is that my BPP books were initially allowed with my first adobe account; BUT now when I open my software adobe digital editions the authorization info. is to stay to my 2nd account and so I'm not able to use my URL for editions of BPP.

  Please inform me how to change permissions information. instead of me - in order, that the software adobe digital editions will be allowed for my first account otherwise, I can't use my books.

  I have studied carefully the prog. but I have found no possibilities of properties where I could change these settings - no simple rule to change the authorization Info?

  The process of uninstalling and reinstalling after has not helped either.

  Kindly help to find a magical solution for such a banal situation Adobe is not expected.

  YELLOW FEVER,

  Andrey

  You can remove the account by using Ctrl-Shift-D (Cmd-Shift-D on Mac).  However please note that exercise strictly removes the computer account information and does nothing else.  Very precisely, it does not increase your allocation of activation.  Repeated authorisation/exercise, will lead to disrespect of your activations of alllowed, and you will need to submit a web request (http://www.adobe.com/support/digitaleditions click on 'Submit a web case')

  If you want to use the two AdobeIDs then you're better, creating a new operating system user account and then authorizing ADE on this account with your other AdobeID.

• How can I change my warranty information after registering?

  Hello

  Is someone can you please tell me how to change the details of guarantee of a product that I recently registered?

  Thank you

  As far as I know you cannot change these saved details.
  Contact Toshiba directly and explain the situation. They can make and modify all data stored in their database.
  Email [email protected]

  You should contact Toshiba in your country. Details are at http://eu.computers.toshiba-europe.com/innovation/contact_toshiba.jsp

  Don t forget to send the exact model of laptop, serial number and your complete address.

  Also, explain what needs to be changed.

  Post edited by: ADMIN

• How to change the friend information

  Hello! I need to know how to change the countrry... so I can buy creative cloud... someone help me pleaseChanging

  Maria,

  The country of the Adobe ID, payment details & store must be the same.

  For tax reasons, it is not possible to change the country associated with an existing Adobe ID. To work around the problem, you can create a new Adobe ID to the e-mail address associated with your current Adobe ID.

  Please see this link for instructions:

  Change the country associated with your Adobe ID

  Guinot

• change the identification information in the repository

  Hello world.

  I want to change the username or / and password for the repository to update on the computer deployed vmware.

  I know it has to be done: "/ opt/vmware/var/lib/vami/update/service-deploy.xml".

  But I need to enable this without a reboot.

  Someone here who could help? What service needs to be restarted to activate it?

  You can use the post-installation script provided for the update,

  < vadk:PostInstallShellScript / > under < Section xsi: type = "vadk:UpdateSection_Type" >

  and restart OBA.

  I guess it is 1.0? It would be /etc/init.d/sfcb to reboot.

  Note: We handle restarting Oba in Studio 1.0, allows us to query the status of the installation, so you can see a failure in the CLI user, even if the installation is successful OBA. If you connect later but you will see that the installation was successful.