HP Deskjet Series 1510: Black print cartridge slightly

I use deskjet series 1510 for about a year, but recently there is a problem on the black cartridge. When I put quality on plain paper normal at best quality, the output paper still prints the words a little. I try to use special paper, but it's always the same. Then I try to use the photo with the highest quality paper and the result displays the words clearly. This thing happened after I refill the black cartridge for myself, not to buy original hp cartridge. Is it possible to make it clear again with the best quality paper ordinary setting? Because it is too extravagant if I always use the quality setting best photo paper or there may be some indication of failure of the axis of the printer? I hope I explain cleary, look forward to the solution, thank you.

Kind regards

Thie

The black cartridge is not used when the photo paper is selected, because the black pigmented ink is not compatible with photo paper.

It would seem that you have incompatible ink or have introduced air into the black cartrdige.

Replace the black cartridge with a genuine HP cartridge should solve the problem.  [Unless the refill ink has contaminated the gas caps and wipers, in this case more work may be required...]

Tags: HP Printers

Similar Questions

  • DeskJet F4480: full black print cartridge still does not print black. Colors OK.

    What the title says. All of a sudden my Deskjet F4480 does not print black. All cartridges are almost nine (changed recently, bought at Staples). Colour printing is OK. Print a page with black text and results in only the images printing color images. I only went through all the steps of cleaning cartridge several times, no difference. There is no error message, just black not appear do not at all.

    And... Here is the solution.

    Funny how I found an explanation of the problem and how to fix it on a different printer manufacturer's Web site, but not on HP... But I digress.

    The black cartridge has been blocked. The way of difficulty is:

    1. remove the faulty cartridge from the printer.

    2. place a small amount of boiling water in a cup (about 1/4 in.) and dunk of the print head (the part where the ink comes out) in warm water for a minute. Do not immerse the entire cartridge in hot water, just the print head.

    3 take it out, pat against a paper towel, observe the model ink left in the cartridge on the towel. If too little / interrupted, dunk again in hot water for another minute, pat again. You want to get an unbroken line of ink through the length of the print head. Repeat as needed (I did 4 times total).

    4 cartridge Pat dry everywhere, put it back in the printer, run cleaning cycles (1 - 2).

    5. If still not good fixed, take out the cartridge and repeat 2 (I had to do it again).

    You will lose little ink, cartridge of bad and good a well (you can not run cycles with only 1 cleaning cartridge), but at least you won't have to throw a nearly full cartridge.

  • HP deskjet 1010:802 black print cartridge error

    Hi, I was buy new set (light black) cartridge for my HP 1010 deksjet via the HP store. But when I changed the black cartridge, he said that my new cartridge was not original, and I have to install it. When I changed the Tricolor flag, it works! I cleaned the black cartridge and place it on my printer, but doesn't work

    What should I do?

    Hi @Osh35,

    Thank you for your quick response. Please visit this link: http://support.hp.com/us-en/document/c03772927 for more troubleshooting to try to resolve the situation.

    I really hope that the problem is solved without hassle and the printer works great. I hope this helps. Please let me know how it works. Just to say thank youPlease click the ' Thumbs Up ' button to appreciate my efforts in giving me a congratulations. If it helps, Please mark this "accepted Solution".

    Thank you and have a great week ahead.

  • e-All-In-One series C410: HP Photosmart - black print cartridge produces only "ghost image".

    The black print cartridge produces a ghost image.  I installed a new cartridge with the same results.  The photo and 3 color cartridges cartridge are all ok.  I also introduced "clean printhead" and ran a "print quality report", where black could not appear in the report.

    Dragon fur, I rechecked possible solutions in your response, and after a new test of everything that I had already done, I noticed an alignment test.  That was the problem.  I tried to clean the print heads, as a last resort, on my 4 year old printer.  Solution: I bought a new printer.

    Thank you for your wonderfully detailed answer.

  • HPO D5560 not print with the black print cartridge

    Having a D5560 printer which stopped printing with the black cartridge.

    Thought it was the cartridge has installed a new (only use HP cartridges) no difference

    After thinking the Black just stopped - no phasing-out quality, etc..

    Ran the cartridge filter (all levels of cleaning) no difference

    Print well if I remove the black cartridge so that the Tricolor print black but it's only good to work around the problem

    I use this on Windows 8.1. It worked fine for months

    Can't think that I had installed recently HP driver updates

    I have a hardware problem?

    Thanks for any input

    See you soon

    Geoff

    OK, so it's weird.

    Just thought to connect my netbook windows 7 into the printer.

    It print very well with the black print cartridge.

    Sent a work computer Windows 8.1 and now prints fine in black of the black cartridge.

    Problem solved, but I'm losing the plot!

    See you soon

    Geoff

  • Message "install the black print cartridge.

    I installed my new LaserJet Pro M127fn MFP printer.  However, even if I have the cartridge properly into the printer, the above message keeps appearing.  I tried a hard reboot several times, but the message continues to appear, and I'm unable to print.   What causes this problem?

    There could be some left on the toner packaging. Please try the steps outlined in this guide below, if all goes well he will clear the error

    Toner blinking or 'Install black print cartridge' Message is displayed on the control panel

    If this does not work, and given that the printer is brand new, you can also contact HP in North America at 1-800-474-6836 support or find the local for your country here phone number: http://welcome.hp.com/country/w1/en/support.html please look for the category 'technical support after you buy '.

  • Black print cartridge registers is not on the right side of the page

    CP1215 has developed a weird problem! Recently replaced the black print cartridge (new, original HP).

    Printing a document in BLACK color, this isn't a problem. Crisp and clear impressions.

    Print the same document in color gives completely misaligned recording BLACK on the side RIGHT of the page. The side LEFT is clear!

    Printing CONFIGURATION PAGE confirms the problem. Registration of marks below on the LEFT are perfectly aligned.

    But on the lower RIGHT, all colors are aligned with the exception of black - the black line is much higher and offset printing to the right where it should be. That's why the color prints are all blurry on the right side of the page.

    Calibration several times running, check the drivers etc.

    Any help/advice is really appreciated!

    Hi Gemini02,

    Sorry about the long absence, but was busy with other stuff. More beat troubleshooting according to your last email.

    First of all, a few answers to your questions:

    1. don't know what the problem is. Don't want to start replacing immediately.

    2. all ink levels are more than 80%; Black nine.

    3. all the cartridges are original HP Black has been replaced recently, the other three provided with your printer.

    4. the paper is double-a premium, 80gr

    5 paper is set on the plain. Have you tried with the HP90 and light parameters too.

    After following your instructions of troubleshooting:

    6 printer moved closer to the wall outlet - it's a machine heavy tho!

    7 pressed & held green button. Config and supply status printed pages.

    8. print with other applications (Photoshop, Word, PowerPoint and Adobe Reader).

    Problem persisted. Registration completely to the bottom of the hand right side of the page and the worst in the lower corner straight out.

    Acts of desperation next, pure:

    9 deleted each cartridge, shaken several times on the axis horizontal and then triggered one end while decreasing the other and vice-versa several times. Replaced in the status bar.

    10. Ran HP Toolbox calibration.

    11. test print to Adobe Reader - same document as before. Substantial improvement!

    12. Repeat steps 9 and 10. Further improvement.

    13. Repeat steps 9 and 10 more. Almost no problem checking.

    14. Repeat steps 9 and 10 more. No record of the questions at all!

    Then, to avoid the location and power source:

    15. moved printer in its normal location.

    16 connected the printer to its normal power source - an extension of good quality.

    17. reprinted on the same page. No registration no questions at all.

    I have no idea why the steps 9 and 10 would have such an impact. And why repeating them would improve the print quality progressively until no problems are observable. I have detailed my action here in case they can help someone else.

    I thank very you much for the support and guidance you provided. If you have any idea why the repeated shaking and calibration solved this problem, I would be very interested! Keeping in mind I ran several times previously without success to calibration.

    Thanks again for your help.

  • LaserJetPro M201dw: Error Message on new HP LASERJET PRO M201dw - "install the black print cartridge.

    Hi, we have a new printer HP LaserJetPro M201dw. We put up this morning, following the instructions as stated in the manual, but the printer keeps blinking and say "install the black print cartridge or clear jam."

    The printer has never been used, so there is no jams, and the ink cartridge was too brand new and a black cartridge HP official. The printer does nothing, it doesn't print, I can't do a cleaning page, it simply does not work. I tried resetting, disconnected from the power supply from the mains and put it back, and we tried a second new ink cartridge, he pulled several times and it still says "install the ink cartridge. I is not a jam in the printer at all. I tried following the recommended steps for others who have had the same problem, but always without success.

    The printer has been installed successfully on my Windows Vista computer, but the same error message appears on my computer when I try to print directly from the computer.

    I would be grateful for any suggestion. Thank you very much.

    You probably have a joint expedition on something.  It really is a common thing, now it's HP shipped toner in printers take the tray, toner, open everything. Tilt the machine upward, look inside, etc.  Use a flashlight if you have not entered of lights in the room.

    If it's blue or orange, a transport lock.  It could be as simple as a piece of tape, a plastic tie or a block of expanded polystyrene (white).

  • My V715W was not printing black print cartridge replaced with cartridge Dell, error message says lack of empty, re-installed ink cartridge the cartridge with the same message. Put original cartridge is black and got the same error

    My V715W was not printing black print cartridge replaced with cartridge Dell, error message says lack of empty, re-installed ink cartridge the cartridge with the same message. Put original cartridge is black and got the same error

    My dells V515w printer will not print after that I changed the cartridge, the cartridges black & color dells. There is no print blank paper. Re-installed I'm really lost.

  • OfficeJet HP5510 remove and check black print cartridge error

    Hi, my OfficeJet 5510 was printing very well. Then suddenly gave me the error "remove and check black print cartridge". The cartridge has plenty of ink. Remove and replace the cartridge. No luck. Past to another black HP cartridge. Same mistake. Any suggestions?

    Hello

    Only two suggestions for you, but they might do the trick:

    Try the troubleshooting steps as much as possible the documents below. The only step that you should ignore is to buy a new cartridge, since you just got a new.

    "Remove and check [color / black / photo] cartridge ' Error Message appears on the screen of the control panel.

    "Incorrect print cartridge" or "Print cartridge problem" message

  • during installation of HP DESKJET INK ADVANTAGE 3525 does not recognize original black print cartridge

    Hi all

    during the installation of my new printer HP DESKJET INK ADVANTAGE 3525 I discovered, that the printer does not recognize the new black ink cartridge. The black cartridge, as well as the other colours, is original and it was packaged with the printer.

    Thanks in advance for your help and have a nice day!

    Hello @Hugh_G,

    Welcome to the HP Forums

    I'm sorry to hear that your printer does not recognize the black cartridge, and I am happy to help you solve this problem!

    Are getting you any kind of error message about the cartridge? If this is the case, please follow this ink cartridge problem: "Not compatible ink cartridge" or "Ink cartridge must be replaced" message for HP Deskjet 3520 e-all-in-one and HP Deskjet Ink Advantage e-all-in-one 3520 Printer series document and, hopefully, the printer will recognize the cartridge after these steps.

    Maybe that's not the question if you thinking maybe that black ink is not printing? If this is the case, please try these steps printer prints blank Page or not printing black or color ink for HP Deskjet Ink Advantage and Deskjet 3520 e-all-in-one printer series for a possible solution

    I would like to know if these steps help and what happens after trying them and I hope that we can get things working for you!

  • DeskJet 3520: no black print with new ink and genuine cartridge is full

    No black print with genuine new cartridge ink level shows and complete.  Many other colors are printed. This happened after I made the print heads clean and clean ink smears.

    Thanks for the reply

    Now, if you were to call to our technical support team, they should be able to implement a replacement for you for this printer model, regardless of the status of the guarantee.

    Call them and let me know how things are going for you!

  • HP 4650: HP 4650 black print cartridge (63 HP) will not be printed

    In February 2016, I bought a new HP 4650 printer for a seasonal vacation home and it worked perfectly during the 3 months we were there. We returned home in July 2016 of holiday and the 63 HP black cartridge would not work and a new one has been purchased and installed. We have used the printer in just 2 weeks and not very well. Now in October 2016, we go home and again once the printer will not print black cartridge HP 63 is shown as almost empty of ink, which, after only 2 weeks of light, use in July.

    Why don't the 63 HP black print now even if it shows is not empty no ink? And why the cartridge last a very short time, two weeks of very clear use in this case?

    What is happening is that the ink print heads are drying up a lack of use.

  • Black print cartridge

    I have an all in one single 5510 and have just replaced the cartridge black I thought I had run out of black ink buk with a new black cartridge is still not printing - why? having checked I reinstalled properly and cleaned cartridges and followed everything I needed! I replaced a front black ink cartridge and it didn't happen!

    I am in England so he will take back the weekend. Thanks for your feed back.

  • Printer will not work without black print cartridge

    I got a message saying I need to replace the black ink cartridge before I can print.

    Is there anyway I can print just using the color cartridges.

    Almost all colour cartridges are full, and I need to print something really urgent.

    My document is a word that has no color to black ink only.

    OK, get you the best quality, I would say replace the black cartridge with a new one.

Maybe you are looking for