HP DJ 2540 depth of printer with feeder and tray closed print

Similar Questions

• The iexplore.exe program ceased to interact with Windows and was closed

  The version of iexplore.exe 9.0.8112.16447 program ceased to interact with Windows and was closed

  This happens from time to time only.

  Hello

  Follow these methods.

  Method 1: I suggest that scan you Chccker file system (CFS) on the computer that would be a system file corrupt on the computer search and replace.

  http://support.Microsoft.com/kb/929833

  Method 2:  If Internet Explorer does not work, you can try to disable Internet Explorer and then enable the feature that is as good as the uninstall and put it back.

  Follow the steps below to do the same.

  To enable or disable the Internet Explorer, follow these steps:

  a. click the Start button, select Control Panel, click programsand then click Windows turn on or off features. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  b. uncheck Internet Explorer. Click OK and restart the computer.

  c. now follow the same steps to activate Internet Explorer by selecting the checkbox.

  Access the link for more information on the above steps to turn off or on the features of Windows 7.

  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-features-on-or-off

• The SystemSettings.exe version 6.2.9200.16384 program ceased to interact with Windows and was closed

  Original title: can someone please help me Dell can not... The SystemSettings.exe version 6.2.9200.16384 program ceased to interact with Windows and was closed.

  Here is what I get when I try to download the Dell digital program.  I also can't use it either on the site to check my phone and nobody at Dell know what to do...

  The SystemSettings.exe version 6.2.9200.16384 program ceased to interact with Windows and was closed. To see if there is more information about the problem, check the history of the problem in the control panel of the center of the Action.

  Process ID: cd8

  Start time: 01ce962cbf318c8a

  The termination time: 10

  Application path: C:\Windows\ImmersiveControlPanel\SystemSettings.exe

  Report ID: f1125230-0221-11e3-be6b-84a6c8d081a7

  Failed package name: windows.immersivecontrolpanel_6.2.0.0_neutral_neutral_cw5n1h2txyewy

  Flaws in the application related to a package ID: microsoft.windows.immersivecontrolpanel

   

   

  my laptop did not work properly since I got back from dell.  I also can't do a refresh of ore a reinstall then please to do not recommend do not.  I tried a clean to stall the disc, nothing... Help me please.

  Malinda

  Malinda,

  Try to create a media disc by following the steps in http://windows.microsoft.com/en-us/windows-8/create-reset-refresh-media

  If the problem persists, try to perform a refresh and check if that helps.

  Note: The applications that came with your PC or you installed on Windows Store will be reinstalled, but all the apps you have installed other Web sites and DVD is deleted. Windows puts a list of applications on your desktop after you refresh your PC.

  Let us know the results.

• HP Deskjet 2540: How to print only the Page showing

  How to fix my printer to print just what is on the screen?

  For example, I am trying to print the list of the NBA team, which shows on the screen, but when I hit print, it prints five pages and the list is divided between the last two pages.

  I used to have a nice little program, years, called "Print Screen", which I was allowed to do, but it became obsolete.  My HP 2540 is new and I have the CD with any software.  Is there something out there that will help you?  TIA

  D-S-N

  Thank you banhien, but as I mentioned in the post, the list was divided between two pages when it print so choose page I was only half of the team.  However, I found a solution, provided by HP and ready to install.  I remembered a window asking if I wanted to install "HP Smart Print" shortly after I installed my new printer to appear.  I didn't know what it was, I went on it.  I shouldn't, because it's actually the version of HP of the old program 'Print Screen'.

  It allows you to choose from, with the mouse, the entire page or a part of the page, preview and enlarge (up to 200%) or to reduce and print any number of pages you want.  Really great!  I found it waiting to be installed in 'Tools' on the menu of Office Windows 8.1 under "HP Smart Print 2.1".»  As soon as it is installed and I went to the for use, he informed me that there is a 'Smart Print 2.7' update available, I did, it only took about 30 seconds and he was.  It works perfectly.

  A second solution is to go out tomorrow and buy another victory. 8.0 HP keyboard, to replace my five-year-old wireless keyboard HP Deluxe Desktop which is supported only through Win XP and who does not the "Prnt scrn" button  I guess it is old 32-bit and 64 - bit.  Hitting "ALT - Prnt scrn" used to work with XP and earlier operating systems.

  Dennis

• OfficeJet 4500 scanner with feeder

  I can scan a single page when I place the document on the glass.  However, when I put 2 (or more) pages in the charger it does not work.  It will pull through the feeder and scan documents (PDF) images is blurred.  I don't know how to solve this problem.

  Hi Cmdavis,

  You can scan directly from the book of Mac himself with the 'Apple Image Capture' software that is installed.

• HP7520: How to scan 2 pages with the automatic document feeder and save to a file?

  How can I scan 2 pages with the automatic document feeder and save to a file?  (Right now, it happens that 2 separate files)

  I have a HP7520, & again, I wish scan 2 pages into a single jpeg file.

  Thank you

  Well, in general JPEG format does not support several concept as a document page. Thus, each image in the JPEG file is saved in a single file. If you are considering of reduction of 2 images in 1 paper size (example: A4), you may need some image editor to do

  If you are looking for a mulit-page image format, TIFF can be a format suitable to use.

  https://en.Wikipedia.org/wiki/TIFF

• Printing problems with XP and Lexmark-documents are just stuck in the print queue

  Original title: printing problems with XP and Lexmark

  Until yesterday, I was able to print OK using Windows XP and a Lexmark Printer series 3500-4500 with wireless capabilities.  Reported network test wireless (on printer) and report indicates that there are no reported problem, also did the diagnostic test and which shows no problem either.  I can't print and documents are just stuck in the print queue - please can someone help, it drives me crazy because it's probably a very simple solution.

  I guess you do not have all of the error messages.

  It is possible that comes to mind that your printer has received a new IP address of your router (this could easily happen if you have several computers and other devices that connect to your wireless network).

  Find the IP address of the printer of his network diagnostic page.
  Click Start > printers and faxes, right-click the printer and select Properties
  Select the Ports tab, then click on the button "Configure Port" (be careful NOT to click anywhere in the list of ports)
  Make sure that the IP address in 'Port settings' is identical to that shown on the diagnosis of your network printer page.

  To avoid this problem in the future, you must configure the printer to have a static IP address.  See your printer User Guide for instructions.

  Choose an appropriate subnet address (i.e., has the first 3 groups of numbers the same as the other addresses in your network) but who is not in the range of addresses assigned by the DHCP server on your router.  See the User Guide of your router for more details.

• Print with photos and / or burn them on CD - the legend, I entered my PHOTO folders for each photo.

  I have Vista.  I want to be able to print the line of legend with my photos.  I love OLD pictures with date and various info on back.  I want to keep this info with the picture.
  I would like to be able to print it if you wish, or burn it to a CD.

  I have Vista.  I want to be able to print the line of legend with my photos.  I love OLD pictures with date and various info on back.  I want to keep this info with the picture.
  I would like to be able to print it if you wish, or burn it to a CD.

  ===========================
  Not an option with Photo Gallery.

  The free Picasa software has several options
  to add text to pictures.

  (FWIW... it is always a good idea to create
  a system before you install restore point
  software or updates)

  Picasa
  http://Picasa.Google.com/

  After you download and install Picasa...
  Open the program and double left click
  an image to open the editing functions.

  To add text to the front of the photo...
  choose... Simple retouching / text button...

  More info...

  How to add text to your Photos using
  Google Picasa 3
  http://www.ehow.com/how_4599330_text-photos-using-Googles-Picasa.html

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Can't print Photosmart C5280. Error "object GPCore COM has stopped working and was closed".

  I have problems printing my Photosmart C5280 All-in-one on my desktop of Windows Vista 32-bit. I felt for a few years and have only recently met this issue. A few months ago, I set up a home network so I could print from my Toshiba laptop. The printer is connected to the computer via a USB cable and the laptop is connected via a Bigpond Modem/Router which is connected to the desktop via an ethernet cable. More recently, I have also configured for my son to be able to print from his HP laptop. Initially, we were able to print from any computer. The two paltops are running Windows 7 64 bit. However, in recent weeks, we noticed that we were no longer able to print from a laptop, and a few days ago, I was unable to print from the office. When I try to print from the office, the print job seems to go to the print queue, but is then removed from the queue. I then get an error message

  "GPCore COM object has stopped working and was closed".

  
  

  This applies to all applications even the test print. I just went through the steps on the HP site, including downloading and execution of printing HP troubleshooting and doctor Scan and uninstall then reinstall the printer. I'm a bit of a novice at the side Computer Hardware and wonder if there is anyone out there who has had a similar problem and found a solution. Any thoughts would be appreciated.

  Hello MikeF48,

  Sometimes to do a simple uninstallation / reinstallation is not do the trick, and we try to remove all the software from the computer completely. Most of the drivers available at HP have a scrubber utility that removes all traces of the software on the computer and allows you to reinstall the software fresh. We should start there and see if that gets us running.

  I recommend you to do all this on the Vista machine. Once we have a working computer we can then pass from there to other laptops.

  Here are the instructions to use the tool of the scrubber. There are two sets of instructions, one for if you have installed the drivers from the HP website or if you have installed the drivers from the CD that came with your printer. Follow the instructions for your installation accordingly.

  Of the Original installation CD:
  1. Insert the CD in the drive and then cancel Setup
  2. open my computer and click right then on the CD from the drive and select open
  3 open the Util folder
  4 open the CCC folder
  5. If you have an HP computer, run the L3uninstall.bat. If you have a computer not HP, run the L4uninstall.bat
  6. once the uninstall is complete, restart the computer
  7 run the Accessories\ System Tools Disk Cleanup
  8. download and install the latest version of Adobe flash player
  http://get.Adobe.com/flashplayer/
  9 download drivers and full software features
  Software & Driver Downloads - HP Photosmart C5280 All-in-One Printer - Vista
  10. run the download to reinstall the printer
  
  If the software has been downloaded and extracted to your system:
  1. type % temp % in the field of race
  2. Locate and open the folder starting with 7z (example: 7zS2356)
  3 open the Util folder
  4 open the CCC folder
  5. If you have an HP computer, run the L3uninstall.bat. If you have a computer not HP, run the L4uninstall.bat
  6. once the uninstall is complete, restart the computer
  7 run the Accessories\ System Tools Disk Cleanup
  8. download and install the latest version of Adobe flash player
  http://get.Adobe.com/flashplayer/
  9 download drivers and full software features
  Software & Driver Downloads - HP Photosmart C5280 All-in-One Printer - Vista
  10. run the download to reinstall the printer

  After having uninstalled the software and did a reinstall of fees. Let me know if the problem is still the Outlander.

• After the update to el Capitan my iMac will not be asleep. I put it to sleep and turn off the mouse and keyboard that goes with it, and 5-10 minutes later, he wakes up on his own. Now, I have to stop it after use and each time only. Major pain

  After the update to el Capitan my iMac will not be asleep. I put it to sleep and turn off the mouse and keyboard that goes with it, and 5-10 minutes later, he wakes up on his own. Now, I have to stop it after use and each time only. The Major pain. Any help would be greatly appreciated.

  Please test after taking each of the steps that you have already tried:

  Step 1

  Take all of the measures suggested in this support article, including those under the title "If the previous steps do not work." It is the starting point for a new effort to solve the problem.

  Note that, as stated in the article, the computer will not sleep, if some sharing services are enabled. In the menu bar, select

   ▹ System Preferences... ▹ Sharing

  Disable all sharing services.

  Step 2

  If sharing music iTunes home sharing is enabled, disable it or quit iTunes. Do the same with third-party applications that have a similar feature.

  Step 3

  Select

   ▹ System Preferences... ▹ Accessibility ▹ Speakable Items: Off

  Step 4

  Select

   ▹ System Preferences... ▹ ▹ Advanced Bluetooth...

  and uncheck the two boxes marked

  Open Bluetooth Setup Assistant at startup if...

  Step 5

  Reset the printing system.

  Step 6

  Back up all data.

  Triple-click on the line below on this page to select, then copy the text to the Clipboard by pressing Control-C key combination:

  /var/vm

  In the Finder, select

  Go ▹ go to the folder...

  from the menu bar and paste it into the box that opens by pressing command + V. You won't see what you pasted a newline being included. Press return.

  A folder named 'vm' should open. Inside, there may be a file named 'drag '. Move this file and only this one in the trash, but do not yet empty. You will be asked for your password. Close the folder window.

  Restart the computer and empty the trash.

• New Premium Officejet Pro 8600 with envelopes in Tray 1 and 8.5 x 11 in tray 2 copies only to Tray 1.

  New Premium Officejet Pro 8600 with envelopes in Tray 1 and 8.5 x 11 in tray 2 copies only to Tray 1.  When I try to select the tray 2 in copy options, only Tray 1 appears as a choice.  How to choose tray 2 when it is not listed and do the copy default tray?

  I remember coming across this question:

  1. turn off the printer and remove the lower whole and not just the tray 2.

  2. turn on, turn off,

  3 replace the tray 2 and the power up.

  To enable tray 2 as default copy ferry. Go to the printer->-> select copy LCD display-> select settings-> a selected tray 2 as default.

• ' Spooler Sub System App stopped working and was closed "__MS Vista Home Premium with SP2, 4 GB of RAM & 32 bit OS.

  ' Spooler Sub System App stopped working and was closed ".
  MS Vista Home Premium with SP2, 4 GB of RAM & 32 bit OS

  Hello

  Check chan seen message here - one of the highest.

  fixed spooler subsystem app stopped working
  http://social.technet.Microsoft.com/forums/en/itprovistaprinting/thread/460f297a-dd66-4476-A176-542e1519ca3e

  ===================================

  If the above didn't help:

  Use this method to clear the spooler and then uninstall and reinstall your printer (check with the manufacturer for)
  the latest driver).

  Check Mr. Fixits here and if you use the other methods go back and try again later.

  Problems of print and error - a Mr Fixit of printing
  http://support.Microsoft.com/GP/printing_problems

  Solve printer problems - a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/8c11977e-8244-408f-A036-7978a618d7a21033.mspx

  ------------------------------------------------------
  Logon as administrator

  Start - type in the search box-> COMMAND - control to the top of the list and RIGHT CLICK – RUN AS ADMIN

  You can copy and paste each line except those brackets and press ENTER after each.

  net stop Spooler

  (echo suppression of all print jobs)<-- you="" should="" see="" this="">

  ping localhost n 4 > zero

  del/q %SystemRoot%\system32\spool\printers\*.*

  net start Spooler

  (sound Done!)<-- you="" should="" see="" this="">

  ping localhost n 4 > zero

  Another way
  http://4sysops.com/archives/how-to-cancel-a-print-job-that-hangs-under-Windows-Vista-and-XP/

  Check the print - DELETE/STOP queue all jobs - then right click on the printer - REMOVAL
  http://windowshelp.Microsoft.com/Windows/en-us/help/bb6f81d9-4092-4ac8-9716-2bd008f513e11033.mspx

  If you use Control Panel - Classic - printers

  Try after unplugging your printer if necessary.
  -------------------------------------------------------------

  Also check the spooler print and its dependencies and addictions Service.

  Print Spooler service
  http://www.blackviper.com/WinVista/services/Print_Spooler.htm

  How difficulty Windows Vista print spooler starts do not
  http://www.ehow.com/how_4920100_vista-print-spooler-not-starting.html

  ------------------------------------------------------------

  Check this thread if necessary - to stop and erase the spooler

  http://social.answers.Microsoft.com/forums/en-us/vistaperformance/thread/a15779d6-ac0d-42FD-9Ac2-a1da241ea19f/

  and here
  http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/58b54fa9-cf6f-40F7-90b2-8093c6777493

  ------------------------------------------------------
  Clean the General corruption and repair or replace the damaged/missing files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  CheckDisk (chkdsk) runs at startup.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• The printer status window Interface stopped working and was closed. How can I fix it?

  When I try to print I get the following message from Microsoft Windows: Printer Status window Interface stopped working and was closed. A problem with the application to stop functioning properly. Windows will notify you if a solution is available.

  I have never received a Windows solution.  Once I have selected an email or other document to print and then click on print, nothing happens.  I then log out of windows and then reopen in an and the document will be printed.

  How can this problem be fixed?

  Hi all!

  This is usually resolved with a driver updated from the manufacturer.
  I highly recommend updating the driver to see if that takes care of the issue. If you need help, find the driver for your printer, please provide the make and model and I will do my best to find the right one for you.
  Thank you for using Microsoft Answers!

  Cody C
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How can I unlock the 427 udp port. I'm under win 7 with firewall and microsoft security essentials. No firewalls or additional security software

  How can I unlock the 427 udp port. I'm under win 7 with firewall and microsoft security essentials. No additional firewall or a security software when I go to the microsoft security essentials in the start menu, I can't find any reference to the ports.  I can't printer to work on the wireless network, even if the printer says that it is connected to the network.

  Hello

  Start the firewall of Windows listed in administrative tools.

  Create a new rule to open port 427.

  Carlos

• I created a document in Photoshop CC with URLS and hyperlinks.  I want to take this document and convert it to PDF AND I wan't these URLS and hyperlinks to be clickable.  How do I do that?

  I created a document in Photoshop CC with URLS and hyperlinks.  I want to take this document and convert it to PDF AND I wan't these URLS and hyperlinks to be clickable.  How do I do that?

  It works very well.  Use the screening of high printing quality, but think about what resolution for your graphics card.  In fact if you have higher res images online versions, you can hot link to them from the PDF file.  I used to publish a magazine of the club until a couple of years, and while I've used InDesign, output to PDF format was exactly the same process

  http://www.marlboroughcameraclub.org.nz/photo-news/Arti/photo-news-2013/

  If you want to go one step further, take a look at this example, which uses the SWF to the page turn effect

  http://www.f11magazine.com/current.html

  I assume that your document is a good single page?  Photoshop is a clumsy tool for multi-page documents.