HP dm1 4000 series keyboards

Similar Questions

• New HP Pavilion DM1 4000 series max memory card

  Hello

  I am looking to buy a new ultraportable laptop and like the look of the new series DM1-4000. However, it seems that there are two versions available in the United Kingdom - the 4004SA DM1 and DM1-4027SA. The data sheet pdf, the noticeable difference only seems to be the maximum amount of memory installed (4 GB in the 4004, 6 GB in the 4027). I don't understand not why HP would impose this limit as both have 2 user accessible so-DIMM slots - my preference would be to upgrade the memory 8 GB by replacing both of the 2 GB so - DIMMS with 4 GB (after installing W7 64-bit rather than the stock windows W7 32 bit, it comes with).

  My question is this - is correct these limits of 4 GB or 6 GB or is it just a marketing thing?

  Interesting, the Maintenance and Service Guide (PDF) DM1-4000 series indicates the memory installable max is 8 GB.

  Thanks in advance. Any ideas much appreciated.

  Edit: Also noted there is a model 4020SA and 4020EA... both specify also 4 GB memory Max.

  There is not much sense, it?

  The maintenance manual makes it clear that portable computers running AMD processor have 2 slots of memory each hold 4 GB of memory.  See Chapter 1, page 2.

  Now, the Intel PC base seems to indicate that they cannot contain only 4 GB maximum memory - affordable housing from a single client.

  http://h10032.www1.HP.com/CTG/manual/c03084091.PDF

  Paul

• Microsoft 4000 ergonomic keyboard

  Today, I bought a new Microsoft 4000 ergonomic keyboard.  Can someone tell me how to remove the plastic lip that triggers the edge before (palmrest) about an inch?  Thank you.

  Turn the keyboard on my knees (the lip will be on the lap), so it does not slip. There are three clips on the underside of the lip, pull the lip evenly and voila! Hope it works; He has done for me, by trial and error.

  PepIvy.

• LaserJet 4000 TN: The printer HP Laserjet 4000 Series PCL5: error state & quot; message & quot;

  I sent the following message to Microsoft after a ' update:

  I have a printer HP Laserjet 4000 Series PCL5 TN which worked beautifully "black only" for many years. A recent update (Windows 10:12 / 22/15) seemed to put the printer in the "printer error state", when you try to print a simple document. It has been my default printer for a long time. I followed the suggestions of printer "windows 10", that is, unplug and plug - check cable (not USB) connections, remove the printer from the list of print devices /, reinstall drivers HP for Windows 10 (following suggestions from HP on HP site) - nothing seems to work. It has a network cable connection, but it is directly connected to my computer, no other computers are connected. See screen capture below. I even did a "recovery" of before 12/22! Any suggestions? Thank you. GM

  I received instructions from Microsoft:

  You run the printer Troubleshooter and identify the cause?

  If this isn't the case, we will do that by visiting the link below and see if it helps.

  http://Windows.Microsoft.com/en-us/Windows-10/fix-printer-problems

  Check also the update (KB number) has recently been installed on your computer.

  You can also restore printer drivers and check.

  To restore the driver, you can follow the steps below:

  • Press Windows + R on the desktop screen.
  • Type devmgmt.msc and press ENTER.
  • Expand the printer drivers and do a right-click on the driver and select Properties.
  • Go to the driver tab and click driver RollBack.

  Can I assume that you use a parallel cable to connect the printer to the computer.  If you do this is a known problem that can be solved.  Go to Device Manager and then click ports.  Double-click the lpt for the printer port, and then click on device settings at the top.  Change the default setting of the middle box checked in the box below to use any available interruption. I would also check the legacy down.  If necessary, turn the computer off and then turn it back on, but most of the time this solves the problem without a reboot.

• Where can I find the commands for Microsoft Combat Flight Simulator WW II European series keyboard, 1998

  I recently bought a used game, Microsoft Combat Flight Simulator WWII European Series, 1996, and it was just the drive.  Where can I find the commands keyboard for this game?  I just need a diagram.  Can someone help me?

  Hello

  "Where can I find the commands for Microsoft Combat Flight Simulator WW II European series keyboard, 1998"

  It came as hit the first Google search for your question:

  http://www.allgame.com/game.php?id=14416&tab=controls

  See you soon.

• Natural 4000 ergonomic keyboard that some keys do not work

  I have natural 4000 ergonomic keyboard for about a year now on Vista 32 bit. The keys P, [---],--------do not work (using keyboard on the screen so you may be wondering). Just downloaded and reinstalled the latest drivers and still does not work. It's a software thing or my keyboard was just wrong?

  Any ideas?

  Thank you!

  Hi Savan,

  Thanks for the reply, I would have thought that in a first time. I advanced and tried on a laptop and the same keys still don't work.

  So assuming that the keyboard was already broken, I advanced and open. The fact that I learned a lot about the anatomy of a keyboard. Inside are four layers the rubber part were the keys strike and 3 layers of plastic, so did a quick inspection and noticed some dirt. Used some compressed air blower but the difficult part was cleaning between the 3 layers of plastic, I used a clean and dry cloth in the interval wiping and focusing on letters that were not work. While the keyboard is plugged in so I can test it and see if its working. And guess what, it WORKED. Following cleaning and re-assembled the keyboard. And works very well since.

  I hope this info helps others, sometimes we think air powder top is enough to clean the keyboard, but a few times can get average dirt under these layers of plastic.

  Thank you!

• HP Pavilion DV4-2140us. Looking for Windows XP (32-bit) driver for Mobility Radeon HD 4000 series.

  I have a laptop HP Pavilion DV4-2140US AMD Turion II M520.  I'm looking for a Windows XP (32-bit) driver for Mobility Radeon HD 4000 series video card. I've upgraded HDD to a 1 TB hard drive and the partition for Windows XP (32 bit) power to a dual-boot between Windows 7 (64 bit) and Windows XP (32 bit).

  Hello:

  Please see if it works.

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&swItem=ob-85978-1&prodTypeId=12454&prodSeriesId=472276

  Paul

• f keys and shortcut keys stopped working tried all the bugs found here and there of win7 + microsoft 4000 ergonomic keyboard

  have tried all the bugs found here and there, that is to say updated drivers uninstalling and reinstalling etc.   Win7 + microsoft 4000 ergonomic keyboard I think it's maybe a defective keyboard

  Hi Cynthia,.

  Thanks for choosing Microsoft Community Forums.

  Based on the description of the problem, it seems that you are having problems with the Fn keys and access keys stopped working.

  (1) have tried to check with another keyboard?

  (2) have tried to connect the keyboard to the other computer?

  (3) have you made changes on the computer before this problem?

  I suggest to follow the steps on the screen, keyboard and check.

  Type without using the keyboard (on-screen keyboard)

  http://Windows.Microsoft.com/en-CA/Windows7/type-without-using-the-keyboard-on-screen-keyboard

  I hope it helps. If you have any questions about Windows in the future, please let us know. We will be happy to help you.

• A transmitter/receiver for mouse 4000 series will work with my mouse of series 5000 and 3000 series keyboard?

  The transmitter/receiver for my wireless 5000 mouse is dead!

  If I buy a 4000 wireless mouse 3000 (from office all 5000) wireless keyboard will work on the ARVA 4000? I think I got that right!

  You guessed it right, and it depends on the brand and model.  If they specify a "unifying" receiver it will work, otherwise contact the MFR.

• HP Pavilion dm1 problem of keyboard and touchpad

  Hi I have a laptop hp pavilion dm1... my prblem started when I switched to windows 7 to windows 8.1and then my keyboard and the touchpad would suddenly hang up or will not function... I always press the power button eveerytime it happens and then it will work again when I logged a few moments later again the same problem It stops.

  I always ended up pressing the power button during and again just to make it work... I need help please... It's my first time posting a querry then please help me...

  Hi Agila,

  Welcome to the community of HP, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I'll be happy to help you with your keyboard and TouchPad issues. Can I get your product number? There are a number of different models in the series dm1.

  Thank you

• Color on Satellite A200 series keyboard

  Hello everyone!
  Could someone tell me?
  I would buy the computer laptop Satellite A200-1AX (PSAE6E-01000SRU part number). But I do not see in real life. I want to buy it via the INTERNET. But I see of other nbooks of this series - some of them with keyboard WHITE, others with MONEY. Could someone tell me is EXIST Satellite A200-1AX (PSAE6E-01000SRU part number) with keyboard MONEY?

  Hello

  I don't know about you, but white keyboard is on all mobile A200. Money can be P200 series. Maybe you're confused between these two because they look alike.

  Check it again to the top!

• Satellite A210 series keyboard does not work properly

  I recently bought a series of A210 with integrated cam and I have problems with the keyboard as when I start typing that he starts to jump all in different areas of the document or sentence is anyway to remedy, it is running windows vista and office 2007

  Hello

  This problem appears immediately after the purchase of the machine? Maybe it s a good idea to recover the machine, he might be a software problem.

  On the other side it sounds a bit like a hardware related problem then if recovery doesn´t has you joy then you should contact a local service partner assistance.
  Here you can find near the ASP in your country (just click on the link and you will find a few):

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT

  Have a nice weekend
  See you soon

• Y series keyboard

  After upgrading my series ideapad Y to windows7 the keyboard is now something weird.

  I put it to dualboot with the vista installation std and this under vista but not in Win7

  the keyboard is a nothing KB with a numeric keypad.

  In Vista, it works without having to activate the NumLock key.

  In Win7 you need to activate the NumLock, but makes also the keys U I O turn to 4, 5, 6 etc.

  Someone knows how to fix.

  It is in the bios.

  There is a section that says keyboard something or other.

  Change this and Your ' e of gold.

  Why would you need that stops?

• Update of the backlit 4000 dv7 keyboard problem: incorrect keys of Action

  I bought a backlit keyboard with an envy 17 and put it in my DV7 4285dx.  It fits great and all (I hit it now), but I didn't connect the diodes to one of the USB ports because the labeled connection keyboard backlight has no power to it.  I tried pressing fn + f5 f5 fn + space and all the other combinations that are supposed to enable/disable the backlight without success, but this isn't really a problem for me.

  The problem I have is that all the action key (function keys) are always the same maps as they were on the original keyboard, for example f10 volume upward on the original keyboard and f8 on the new, but it is still f10 which increases the volume on the new.  So I guess my question is how can I change/remap action keys to operate according to their brands.  I know that this was possible on the old series to dv9000 quick launch buttons, so I think it should be possible.

  Any help will be appreciated. (I'm not a noob so don't be afraid to be technical if necessary.)

  a possible program could be Keytweak.

  It allows you to remap the keys. but I don't know if it works with you FN + F keys. It remaps just your whole key. For example if you remap the F6 button instead of the button F8, F8 key becomes the F6 key.

  Niek gr.

• Microsoft Natural 4000 ergonomic keyboard with IntelliType 8.15 64-bit for Windows 7, some keys are not function (new, open, undo, redo, fence, etc.) in Office 2010

  Hello MSFT sensi.
  I need help. I have the Microsoft Natural ergonomic 4000 keyboard with IntelliType 8.15 64-bit for Windows 7 installed. I run on a brand new i7 with 9 GB of ram and 1 TB of hard drive.  I just installed Office 2010.  Have you tested this keayboard with Office 2010?

  I bought and returned 2 of these keyboards at my local dealer and two keyboards have the same problem. Preconfigured keys (help, undo, redo, new, open, close, reply, fwd, send, spell, save and print) F1 - F12 do function not all as they are indicated in MS Word 2010 etc. I was able to program my favorites 1-5 with little problem.

  I did the following to try to resolve the problem:
  1. research of virus (clean)
  2. uninstalled the driver and downloaded the last strand 8.15 64
  3 entered the keyboard layout configuration and reset the default settings
  4 tried to manually program the F1 - F12 function keys

  NONE of these things solve the problem.  Which brings me to the conclusion that this keyboard does not have to be 100% compatible with Office 2010.

  Any suggestions / feature of configuration problems feature keys?

  PS. No, I didn't record this keyboard, because is it not there no solution - he goes back to the retailer.

  To the right of the function keys, there is a key LOCK.

  Toggle this button to toggle between the keys F1 to F12 with their usual function and the functions listed in the relevant programs.