HP dv6-2150us + Windows 7 64 bits + quick launch problem

Similar Questions

• HP Pavilion dv6-1030us, Windows7 professional 32 bit - quick launch controls & WiFi does not.

  On my HP Pavilion dv6-1030us, we installed Windows 7 Professional 32 bit. Quick Launch buttons and wireless assistant will not work.

  Install the drivers relavent downloaded from the support centre. Always face the question. Help, please.

  Thank you in advance.

  Hello

  Try a Hard Reset as follows to see if that makes a difference.

  Shut down the laptop, unplug the AC adapter and then remove the battery.  Press and hold the power button for a minute.  Reinsert the battery, connect the power adapter and start Notepad.

  Kind regards

  DP - K

• Problems with HP Simplepass 2011 - HP Pavilion dv6 Notebook Windows 7 64 bit

  HP Pavilion dv6 Notebook Windows 7 64 bit

  I have this laptop about two years. I had have to rely on the factory affecting several times on circumstances independent-(donjon de Norton Utilities supprimant les registres essentiels). But, recently, I restored to factory setting and updated my Norton Internet Security to the latest version and everything was fine until my fingersensor stop Saw several hours after. He reads is no longer my fingerprint.  I am prompted by the software to enter my password by typing only and not in the typing and scanning. Right now my quick launch is based on numbers from 0 to 9. Can someone guide me to recover my software working properly?

  You can try to uninstall the driver and the software for Simplepass, then re - install, refer to this guide

  http://h30434.www3.HP.com/T5/notebook-operating-systems-and/HP-SimplePass-identity-protection-validity-fingerprint-and/m-p/742013

• HP Pavilion dv6-3230us, windows 7 64 bit. Colors of the incorrect monitor screen.

  the colors on my HP Pavlion dv6-3230us laptop monitor screen are wrong at the start but will correct on its own after a while (an hour or more).  Initially using the brightness button several times would correct the problem, but now will not fix the problem.  Issue started two days ago and seems to take more time so that it can be corrected with the commissioning upward.  Once he corrects himself he will generally be ok until the computer is closed or off.  This problem is constant regardless of what is displayed on the screen (office, internet, photos, etc.).  Any help would be appreciated.

  Shut down your computer and press the ESC key many times.

  Have shown: Start Menu.

  Click on the F10 key.

  In this screen, the issue showed?

  If do not move the screen back and front.

  Any problem?

  If this ocorred in this screen problem is failure in your flat cable or the display. You have to fix it.

  If not displayed make this updates for your problem:

  Update to the BIOS: http://ftp.hp.com/pub/softpaq/sp55001-55500/sp55299.exe

  Graphic Board Windows 7 64-bit: http://ftp.hp.com/pub/softpaq/sp52001-52500/sp52351.exe

  Driver Chipset: http://ftp.hp.com/pub/softpaq/sp52001-52500/sp52355.exe

• Lack the "Switch between Windows" button in my Quick Launch toolbar

  From: Daz 150969

  I don't have the button tab in the taskbar in order to operate the Aero of the computer part. My card under windows is 5.9. I can run aero if one press tab, ctrl and windows key and it work very well, but I think that there should be a button on the tab in the taskbar?

  From: Andrew McLaren

  The "Switch between Windows" button in the toolbar quick launch is enabled by a file called "Window Switcher.lnk" in your Quick Launch folder. If this file is missing, the icon does not appear in the Quick Launch toolbar.

  You are probably missing this file and need to replace it.

  You can get a copy of the original file here:

  "C:\Users\Default\AppData\Roaming\Microsoft\Internet Explorer\Quick Launch\Window Switcher.lnk"

  This place is normally hidden in Explorer (you won't see it).

  To put it on your own toolbar quick launch, go to a command prompt and enter these commands (replace "" with your real username, of course!  :-) -

  C:\>CD C:\Users\\AppData\Roaming\Microsoft\Internet Explorer\Quick Launch

  C:\Users\launch \AppData\Roaming\Microsoft\Internet Explorer\Quick > copy "C:\Users\Default\AppData\Roaming\Microsoft\Internet Explorer\Quick Launch\Window Switcher.lnk.

  You should see a "1 file (s) copied" message when the file is copied successfully. Then type "exit" to exit the command prompt.

  The "Switch between Windows" icon now needs re - appear in your quick launch menu.

  It will be useful,

  --

  Andrew McLaren
  amclar (at) optusnet dot com dot to the

  Another response of the community of Windows Vista discussion groups

• lost the "switch between windows" button on the Quick Launch toolbar

  Hi, I lost the "switch between windows" button of the toolbar quick launch, how can I restore it?

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Dasepo salvation,

  Here are the instructions for the program shortcut "switch between windows" returned the fell on the Quick Launch toolbar:

  First of all, make sure you that you must show hidden files and folders active. Here's how:

  Go to: Start/Control Panel folder Options/configuration and select the 'view' tab select "Show hidden folders and files under the section files and folders hidden from advanced settings".

  Then you can get the file from quicklaunch default section. This location of file is here:

  C:\Users\Default\AppData\Roaming\Microsoft\Internet Explorer\Quick Launch

  You can paste this link into the search bar (Ctrl-Esc). When you get to this place, you will find the 'switch between client.lnk' which you can then drag directly to the Windows Orb and it going bust in the Quick Launch bar.

  Hope this helps,

  Steve <> Microsoft Partner

• Dell Inspiron 3520 under Windows 7-32 bit wireless card problem

  Hi all

  I just bought a new Dell Inspiron 3520 (service code: ) that came with Ubuntu.

  Although I had to install windows 7 32 bit and I am facing a problem with wireless adapter driver.

  When I try to connect to the preferred network I get "unidentified - No. Interntet network access.

  I know it's a driver issue because it works fine on Ubuntu.

  So that the original configuration of Dell site lists:

  "WIRELESS: DELL WIRELESS CARD 1703.

  so I downloaded this driver: http://www.dell.com/support/drivers/us/en/19/DriverDetails/Product/inspiron-15-3520?driverId=K21VK&osCode=W732&fileId=3126779147

  without success.

  Is there something I can do?

  Sorry for the long post.

  Thanks in advance

  Hello and thanks for your reply.

  Discovered that the solution was Device Manager-> ECS-Dell Wireless 1703 b/g/n-> properties >-> Advanced-> 802 .11n changed bandwidth of 20 MHz / 40 MHz automatic.

  

• Respond to create/customize a toolbar in Windows 7 (replaces the quick launch for Windows XP)

  After several hours, with many MS research and research on google to try to get the famous and beautiful Quick Launch Toolbar that no longer exists in Windows 7, I thought it after 3 hours.  Here's how:

  Create a toolbar

  -----------------------

  1. create a folder on your system

  2. right click on the taskbar, select toolbar, select the new toolbar

  3. new toolbar - select displays a file dialog box

  4. Select the folder created in step 1-based

  Customize the toolbar

  -------------------------------

  1. right click on the taskbar

  2. click on bar tasks unlock

  3. right click on the new toolbar

  4. menu popup appears

  5. click on title of show (allows the user to hide the name of the toolbar, which is of the Deb Toolbar)

  6. right click again on new toolbar

  7. click on the text (allows to hide the name of the icon, IE.) Microsoft Office Word 2007)

  8. right-click again on new toolbar

  9. click on view (allows the user to change the size of the icons on the toolbar)

  10 lock the toolbar

  When I spent many hours and kept getting the Quick Launch bar does not exist in this version, it is true; HOWEVER, you can get everything too close with a custom toolbar.  No answer came close to telling how to customize a toolbar, but only how to create a toolbar.  Originally, I had posted a question, but then found an answer and thought that after having no chance he is on this site that I post the answer.

  So I hope this helps anyone who has upgraded to Windows 7 missing and are looking for this bar Quick Launch bar.  This is the closest you're going to get.

  No more frustrated.  NOTE TO MICROSOFT: The search engine provided by MS, you stick with your terminology.  I can't tell you how many times I reformulated my search with your terminolog and kept getting "taskbar" vs "toolbar."  The most I could get it is how to create a toolbar, and that's all.  Then you wonder why users get frustrated and I want to just throw it out the window (no pun intended - perhaps although YES).

  Deb

  Thanks for the tip!

  Easy to find...

  Google:
  where is the Quick Launch bar in "Windows 7".
  http://www.Google.com/search?q=where+is+the+Quick+Launch+bar+in+%22Windows+7%22

  Bing:
  where is the Quick Launch bar in "Windows 7".
  http://www.bing.com/search?q=where+is+the+Quick+Launch+bar+in+%22Windows+7%22

  Yahoo:
  where is the Quick Launch bar in "Windows 7".
  http://search.Yahoo.com/search;p=where+is+the+Quick+Launch+bar+in+%22Windows+7%22

  My favorite hit:
  Guided Help: enable quick launch in Windows 7
  http://support.Microsoft.com/kb/975784
  (Last revised: September 27, 2009)

  * NOTE* - Windows help improved, don't get me wrong.  However, it will be * never * compare to the billions of people who make thousands of billions of pages and trillions of positions and with the help of a search engine designed to explore and index it to find what you need in probably the words that you will use (because they probably * like you * and do not know all the terms fancy some geek came up with many years ago.)  ;-)

• Windows 7 64-bit PNP monitor problem, can I remove it?

  I have problems with my dell 1749 windows 7 64 bit. I had to do a fresh install of windows and this PNP monitor is appeared that is causing me problems with resolution and no 3d available. Can I remove the PNP monitor and use PC of Linda. IM on a 17 inch

  Thank you

  PS., still under warranty

  

  

  Install .net 4.0 (if not already done)

  www.Microsoft.com/.../Details.aspx

  Then the driver AMD

  www.Dell.com/.../Studio-1749

• jdev_suite_121200_win32 does not install on windows 7 32 bit to launch error

  jdev_suite_121200_win32 is to be installed on windows xp, but when I install it on windows 7 32 bit, it gives a directory not found error launch

  pls help

  Tanvir

  Hello

  try to run the file as administrator on Windows 7. BTW. : Why do you not use the installation of 64-bit on Windows 7?

  Frank

• I have a Pavilion dv6 3123c Windows 7 64-bit recovery disc?

  I have a Pavilion dv6 3123c l 64-bit of Windows 7, which began to stop spontaneously. I took it and he was working on and it seemed to work a little better, but would still be closed when you try to view the video. I got a new laptop for Christmas, but I wanted to return it to the factory settings to see if that solve problems and still usable. Whenever I try to run the system recovery it stops in the middle of the procedure. I can't find online for this particular system recovery disks. There are all the other drives I could use or any other option for this return to the factory settings

  Try a HP partner. The price is expected to be on the same $30,00 USD + - $ 5. I tried the link that I provided to the partner of HP and he shows them as the set for $27.00.

  

  Best regards
  ERICO

• HP Pavilion dv6-3071TXq Windows 7 64-bit, get my HP window key

  OK, so I've had my laptop HP Grays online, and recently I leave that fourteen years old uses to go on facebook, it has not only used to do this, install flash chat and video programs after I told her don't probably and then after seeing do me my thing on the PC Tower probably play with the files that run the system. the next time it was turned on I could no longer enter the login screen but could always get with safe mode.

  I drove back to point earlier and then I found the problem and only a reinstallation was apparently the fix.

  I had lost the paperwork that came with the laptop, but still receiving in my email and and Os CD to my PC Tower. I put just to reinstall windows, I choose to format the hard drive and install from there.

  It's only when I got up to put in the CD key I noticed that patients on the bottom was faded almost as on the CD key for windows 7 (home perm OA) and was unreadable, selected reveling in the format I just couldn't go back into windows and get the CD key.

  I contacted gray-online and that they were unnecessary, saying that they do not follow a BONE CD key record that comes with the laptop.

  Having said my neighbor next door on the penalty, I was at, he explained that HP would be able to help me because you would keep a copy of what the OS has been on this laptop, I can provide HP with the number under the barcode - & the number as proof of license and also a copy of the paid invoice if necessary.

  I hope to hear from a representative of HP soon

  Sorry, but this is a user-to-peer support forum. HP doesn't support any official presence on these forums and is unlikely to provide an official response. Please contact HP customer support in your region for assistance at HP.

  In general, the Windows product key on the certificate of authenticity is not the same key is used to activate your HP computer. The recovery discs HP that you should have when you got your computer wouldn't ask a Windows product key and would automatically install the correct product key.

• How to adjust the brightness of the screeen on HP Pavilion dv6-6b26us, Windows 7 64 bit

  Have tried to use the FN with the "F2" key to darken the screen too bright.  It has no effect.  Cannot adjust the brightness of the screen

  Hello

  Please, click on start-> Control panel-> display-> adjust brightness at the bottom you will find a drag bar the brightness of the screen, you can change your settings.

  Or start another shortcut in the search display box type-> adjust brightness at the bottom you will find a drag bar the brightness of the screen, you can change your settings.

  Let us know how it goes!

  * Although I am an employee of HP, I speak for myself and not for HP.

  Click the White Star Kudos to say thank you *.

  Please check accept as Solution if it solves your problem *.

  Concerning

  Maton

• Windows 7 64 bit VPN client problems

  Hello

  I am running Windows 7 Professional 64 bit and Cisco VPN client 5.0.07.0240. I am able to connect to my corporate network and work ok but connection is very slow!

  Connection time is distributed as follows:

  Client program VPN Opening: 70 seconds.

  Click on connect and wait for the user credentials dialog box: 30 seconds.

  Enter the credentials, and then click ok then 'user authentication': 90 seconds.

  "Negotiate security policies": 60 seconds.

  User area credentials if poster again, re - enter the credentials that the dialog box is empty, and then click ok: 90 seconds.

  "User authentication", then connection established: 120 seconds.

  I have a colleague running 64-bit Windows 7 (ultimate edition) which uses the same version and does not have these problems.

  Any ideas anyone?

  See you soon,.

  Gary

  Gary, thanks for the update. If disabling the firewall and restart vpn service did not help. Could you please try and install the 5.0.07.0290 version?

  Before do you, I would like to know if you import .pcf for the VPN Client files. If so, please try to re-create a file .pcf on the PC and try and use this file to connect. Also, I see that the existing .pcf file you are using is a file read-only. Could you change this and give permissions to write to the file, and try to connect. If th does not help the two steps will then install the 5.0.07.0290 version.

  Thank you

  Delvallée

• Windows 7 64 bit without Audio problem - completely lost and incredibly frustrated.

  So, I moved my computer from one room to the other.  Hung, played a game in the evening and went to bed (SOUND WORKED).

  When I woke up the monitor was to a black screen ("sleep" mode is disabled).  I turned the PC then next turn, no determination, the monitor would not show a picture.

  So I moved the video card in a different PCI-e slot, and then again.  No chance to be.

  Once I swapped to another monitor, everything was fine.  I presume that this monitor has gone wrong.  It's a problem for another day.

  So now that I see him, I'm going to play my game and realize that there is no sound.  Nothing works on my audio embedded. Headset speakers.

  * Motherboard: ASRock Extreme 4 970 / drivers: Realtek *.

  The only thing that seems to work is the microphone on my webcam... But I can't hear to be sure.  But the volume bars tell me it is.

  I checked to make sure that nothing is cut.  When I play an audio file, the green bars.  So I re - install the current Realtek drivers (I've lost count how many times).

  Then double-check to make sure that the edge is enabled in the BIOS and nothing is contradictory.  I even tried to disable all the others.

  I plugged my speakers into my cell phone to make sure that they have always worked.  There, all right.

  I gave up after HOURS of fiddling with everything I could muster and finally decided that I would just buy a cheap good sound card.

  Brought it home, plugged into the slot PCI opened and turned on the PC.  When I tried to install the disk drivers.  The software was telling me "Install ADAPTER!"  So now I guess the slot's problems.  So I plug it into the second PCI slot.

  This time, he moved as he should, and everything in Windows shows perfect.  Card installed, drivers updated (even had more up-to-date on the manufacturers Web site) and it's default value under playback devices.  I also disabled onboard sound in the BIOS.

  Same thing now... Green bars when audio is played.  But still no sound.  I continue with my diagnosis and do pretty much everything that I would be done before... Just again with this new map.  I even called their phone support after I almost pulled my hair.  We both came to the conclusion that it must be a bad card. How could a whole separate device no work as well?

  I figured that a little, but he returns for the same product.  House of Ran, plugged (drivers were still installed), same problem.  So no audio with edge and no audio with two separate sound cards.

  SO now I'm at my last option that I can find. I decide I'll try a USB card.  I think this has to work.  Well I installed it, Windows automatically configure the drivers.  All installed correctly.  I rebooted, cross my fingers and played the sound test windows.

  NO SOUND!

  I'm driving myself crazy about it.  I would like to just re - install if I could find my disc.  Even if I do I would take days or longer to put up everything as it was.

  I found the subject that says:

  "net localgroup administrators / add networkservice.
  Press enter, and then type:
  net localgroup administrators / add localservice
  Press enter, and then type:
  output
  "Press on enter, and then restart your computer.

  When I came across it, I thought it should be.  There is nothing else that would create.  But still no luck.

  The only other thing crossed my mind today, is that my Board can go wrong.  But how could he just stop all audio sources. ???  I could see just the edge goes wrong.  But allowing NO AUDIO?

  I'm sorry for this hike, but I thought that what I did should be explained.

  Thanks a bunch for reading, and and help, advice, etc. is greatly appreciated!

  Brandon.

  Problem solved.

  I played with him more as a last futile attempt before joining Micro Center to buy a new motherboard.

  I press the motherboards power button and then the reset cmos button after.  He started to Windows and blasted startup sound. :)

  The edge still audio is not working.  But it does not work with the PCI card, so I'll just be happy with that.

  I would like to know what caused it, or why it works now.  But I won't focus on it.  Simply happy to have my sound back!

  Thanks a lot for the answers.  It's very kind of you to try to help out me.