HP dv6 3180ef access code

Hi guys I need to know my hp dv6 3180ef access code to unlock the advanced in the BIOS Configuration menu?

Hi Reo
Thanks for the quick reply
I do remmember the code access to the bios but I was looking for Advanced BIOS
I double checked my bios and it turns out that I have not advanced bios Setup
Sorry for misleading

Tags: Notebooks

Similar Questions

  • Since iOS 10.0.2 my phone is accessible without the access code

    Since iOS 10.0.2 my phone is accessible without the access code after I pressed the sleep button. Press the home key several times my phone opens. As a first step, it is that he fell asleep in itself not when I used the sleep button but now even after skeep button I can access my phone without the password.

    the rear power and apple support site are not easy to use to report the problem.

    Have you tried to set up your password again in the settings?

  • Access code is lost as soon as the screen turns off

    When I turn my wrist after that my Apple Watch screen exploded, I need to enter the access code. I turn on the wrist, the screen turns off, I turn back, screen lights up, I need to re-enter the password. And so on and so forth. The watch does not maintain the code.

    I am white white, is not dense hairs on my wrist, no tattoos and I wear the watch very well on my skin.

    The funny thing is: it is a replacement watch, I got today. The other had the same problem, but this is probably because the bottom of the watch with the sensors fell, must have damaged the sensor cable. But this one is brand new.

    Hello

    Make sure the wrist detection is enabled:

    • On your iPhone, in the application of the watch, go to: My Watch (tab) > General > detection of wrist - turn on.
  • Woman updated its iPAD Pro 10.0.2 and is now locked screen display "Enter Access Code, contact ID requires your access code when you restart the iPad." She has no idea what is an "access code". Any help is appreciated.

    Woman updated its iPAD Pro 10.0.2 and is now locked screen display "Enter Access Code, contact ID requires your access code when you restart the iPad." She has no idea what is an "access code". Any help is appreciated.

    If she don't remember: If you have forgotten the password for your iPad, iPhone or iPod touch, or your device is disabled - Apple supports

  • My portfolio is currently configured to allow access when locked. I used to be able to double-click the home button and seems my card and I would enter my access code. I have updated to IOS 10 and I am no longer able to do this.

    My portfolio is currently configured to allow access when locked. I used to be able to double-click the home button and seems my card and I would enter my access code. I have updated to IOS 10 and I am no longer able to do this. All the settings are there. I have an IPhone 6.

    Are? you double click in front of the screen of the iPhone are? (pending). This is what seems to work for me.

    I hope this can help.

  • iOS 10 access code

    Is it possible to use only an access code in iOS 10?  I've always used only a password, but the instructions I've seen for the new system seem to require using the key fingerprint to open the phone.

    Reference this support Page - use a password with your iPhone, iPad or iPod touch - Apple Support

    It is always possible and can be disabled in the settings > Touch ID and password/access code.

  • Recently introduced an iPhone out of someone and the access code is still and I do not know Apple ID them and I can not get on the phone and do not have access to a computer so what do I do?

    Recently introduced an iPhone out of someone and the access code is still and I do not know Apple ID them and I can not get on the phone and do not have access to a computer so what do I do?

    You must contact the seller and ask him to remove this iPhone in the devices list. Otherwise, your iPhone will be a useless brick.

    Find my iPhone Activation Lock: a mechanism of extraction of the previous owner - Apple Support

  • I got a notification saying "password requirement: you must change your secret code in 56 minutes"I panicked and entered my access code using the little box? ". I ' t mess up?

    I got a notification saying "password requirement: you must change your secret code in 56 minutes"I panicked and entered my access code using the little box? ". I ' t mess up?

    Yes. You may be victim of a scam, except if you are connected to your business with this requirement.

    Change your password immediately below:

    https://appleid.apple.com.

  • What is my access code for the software updates

    What is my access code for the software updates?  It seems to be a six-digit numeric code, but I have no recollection of anyone establishing.

    Take a look at this thread, what is the password for software update

  • Why apple IOS 9.3.2 requires an access code 4 digit instead of the previous 6-digit

    Today, 01/08/16, my 5s required an update of the access code and only 4 digits, instead of the 6 previous numbers. Why?

    < published by host >

    mweedn wrote:

    Today, 01/08/16, my 5s required an update of the access code and only 4 digits, instead of the 6 previous numbers. Why?

    < published by host >

    You can always use the four or six-digit access code.

    You can change it when you go into the settings of password.

  • Apple TV access codes

    Why AppleTV does not back to school already consulted programming access codes?  Is there a setting I'm missing that will allow continued access without returning to the network (food network, CBS, etc...) for re - check an access code before watching the station again?

    Normally, it is not, or at least should not, require re-entry, but occasionally either something wrong with ATV, or more commonly, the provider of satellite-to-cable makes a change.

  • Look immediately request access code

    I just got a new watch and updated the software.  Now whenever I get my wrist, he asks me to put in my access code.  This was not the case with the other my watch.  Apple support says that it is now the norm.  Have others noticed the change?  I intend to stop using my access code and stop using Apple pay on my watch for this reason.

    Hello

    You may want to use these settings:

    -On your iPhone, in the application of Eve, go to: My Watch (tab) > General > detection of wrist - it lights up.

    -On your iPhone, in the application of Eve, go to: Watch My > password > code turn on.

    -Also on the password settings screen, select Unlock with iPhone.

    After putting on your wrist, your watch don't unlock then after whatever you do first: unlock your watch manually (by entering the access code) or unlock your iPhone.

    Then, it will remain unlocked (including when the screen is idle) until you remove it from your wrist. When you remove your watch, it locks automatically.

    More information:

    https://help.Apple.com/watch/#/apd748b87e2a

  • Terminal to request access code specific app on my iMac OS 10.10 not able to enter the access code

    How to use app-specific code for an OS 10.10 application authentication

    Terminal to request access code specific app on my iMac OS 10.10 not able to enter the access code

    Charles Clark wrote:

    How to use app-specific code for an OS 10.10 application authentication

    You need to say more. Terminal usually wants your admin psswd.

    psswd in terminal will not resonate.

  • IPhone 6 continues to go to the turning off of the screen and the screen where I enter my access code.

    IPhone 6 continues to go to the turning off of the screen and the screen where I enter my access code to return. I hit Cancel on the stop screen or type my password the password screen and it goes back to the screen, I was on. I did a reset, all settings, but not him erase all content and settings. I went all day without any problems and an ago he started to panic. I took the cover of a few days ago thinking it might be the cause of the problem by pressing the power button, that wasn't the problem. Can someone give me some advice on what could be the problem?

    I have not updated my phone to the new IOS

  • iPhone 4 has a scrambled screen. Can I enter remote access code?

    I gave my child my iPhone 4 when I upgraded. He had the newest iOS available for the 4, which I think was 7.1.2 or something close. before I gave it to her, I restored to factory settings and deleted all the files. She created a new password and it used for music and photos. She doesn't have it synced to a device or stored in iCloud. It worked perfectly when I gave it to her. A few days earlier, she dropped and now the screen is scrambled and bring up the screen to enter the access code. I plugged it to my MacBook to see if I could get behind the scramble but I just got a message that the photos cannot be downloaded without unlocking the device.

    - SO my question is, is it possible to enter this access code other than to type in the phone itself? Some behind the scenes where I can enter the code and go to the photos and music living in the unit? This phone has a removable SIM card.

    Grateful for any help you can give me.

    mactwisp wrote:

    - SO my question is, is it possible to enter this access code other than to type in the phone itself?

    No, it isn't.

    I hope that "photos and music living in the unit" were backed up when the iPhone was iTunes or iCloud.  If not, the only hope would be to take the iPhone to an Apple Store or Service Center authorized Apple and determine if it is fixable (very unlikely, in my opinion).  If it's fixable, great.  If this is not the case, the material on the iPhone is lost.  (Note bought from iTunes music can be re-downloaded iTunes on a computer or an iOS device different.)

    For later use, the iPhone should never be the main housing for music not bought in iTunes.  Also, of course, photos taken on an iPhone that are worth saving must be saved.

Maybe you are looking for

  • All-in-one Pavilion 23-Q227C: HP install and download Assistant does not

    Whenever my computer starts up, the HP download and install the wizard tries to run to download a driver Realtek (SP74157) and HP Support Assistant (SP71727).  It fails each time, with a pop up that says "installation HP and download Assistant works

  • create the differential signal of 6289

    Is is possible to create a sine wave of differential on the output of the 6289? And how can I do this. I created a differential DC 1V AO0 positive and negatives 1V AO1. Then measured on a differential input ADC signal, which is my DUT. Now, I'm cutti

  • CAN message handling

    Hi all I'm new to LabView and I find it extremely difficult, mainly because of data types. First of all I need my project to record all of the CAN messages. Second, I need to inspect the ArbitationID and act accordingly on this (some with the result

  • LT2323z - connect to the USB 3.0 Port Replicator

    I just bought the LT2323z monitor to go with a X carbon 1 and connect via the USB 3.0 port replicator.However the LT2323z has displayport digital connections and the DVI-d port replicator. Any ideas how to connect to their place? Here are the flagshi

  • decommissioning of the hp pavilion 2215dx windows 8 for windows 7 prof

    f Decommissioning experience so far. The only problem I had seemed to come of my allowing the Windows 7 pro, install more than 150 updates, which took all day, and then the computer died on me! lol I took a breath, turned on the computer, press ESC a