HP DV6 7210 Envy - we: I think I ordered the wrong part... She will still work?

The fan from the CPU on my laptop HP ENVY DV6 dead recently. I ordered a replacement, and it arrived yesterday. I don't check the part number pretty well. I ordered this part:

HP Part # 682060-001

And I have an AMD A8 APU on the machine, with graphics of APU, which, according to my research, the type of UMA (but not the number of right-hand side for this particular brand of the processor fan).

Will it still work or if I need to order the right part? The reason I ask is: what could be so different between these two kinds of fan? In addition to the speed or shape?

I need this laptop repaired as soon as possible, because I want it to work when I leave for a vacation in a week and a half. I ordered this fan for a Chinese company, and it took two weeks to get [!]. Is there another place I could buy one? As directly from HP?

You ordered the Intel version. They are similar, but not exactly the same thing. I suggest using google image for two part numbers and requires special attention and you'll see that screw hole patterns are likely different. If this is not the case, one that you ordered will fit the holes on your motherboard and fits into the air holes, so I say use the thing.

Tags: Notebooks

Similar Questions

  • I think I got the worst Pre which will still...

    Go to do this thoroughly so that maybe some of you can help me before I have begin Sprint tomorrow and see what to do about the replacement of the phone - there may be something further I can do with my phone so it can work correctly.

    So here's the deal... I bought the phone earlier today (I guess that technically yesterday) July 1. The second, I left the Sprint Store with the new phone and a new service, I started trying to add contacts to get in touch with people, etc. to inform them of my new phone number. Questions, I started to have immediately was that whenever I tried to open something, he told me that the memory was out and I had to close some cards to be able to open new. The problem with this is that there is no cards open to all. Then I realized what the hell, maybe the phone must charge all the way on the first initial use. So I loaded up the phone with full battery and not tried again - still no luck.

    I entered in Google and began searching autour and came across some people who proposed to reset the unit by holding down the power button and flipping the ringer switch and holding the orange key + sym key + key r and do the reset in this way. I tried both and when the phone powered on, still no luck. I've also read that some people were able to find a workaround that involves putting the phone in airplane mode and then put in normal mode - tried who, still no luck. Then I jumped the battery, let it rest for 2 minutes, put the battery back in and still... no luck.

    I don't know what is happening with this phone. I can send SMS I can make calls, however receive calls is becoming a problem because the phone is IMMENSELY lag so when the phone comes out of sleep state and warns me that someone calls, and at the time when I click on the button accept to launch the appeal, it has already been too long and the caller hangs up. I press on the screen and it can literally take up to 10-15 seconds before the phone will recognize I clicked on the screen, if it recognizes even I clicked on the screen in some occasions.

    I thought that the eff, I'm tired of dealing with this, I'll go and do a hard reset and that I tried to back up the info on the unit, once again, I get the dreaded error full memory and it will not open the device information screen. So I pulled the battery, waited, put it back in and the SECOND, he went to the main screen, I immediately started trying to get to the device information screen. That day, it was a success and I managed to launch a hard reset. After going through the situation any reset, the phone backwards, I chose English as the language and then signed-in my profile, and considering that the phone was brand new, there was nothing that had to sync so it took me directly to the main screen. I thought great, now maybe it will work. I tried to pass in the ringtones option to change ringtones, nope, memory full. Tried to get into the launcher and clicking on 'List of apps' and again, no, memory full. I tried to configure Wifi so that perhaps the update for the phone will fix the issues I am and NOPE, the memory is still full.

    SO, with all that said, I signed in online phone manager and launched a hard reset to try the feature based on the web ONCE AGAIN. I still have not received the text message that initiates reset (and I started about 2 hours ago). So yes... The phone is still pretty crushed.

    Did any of you can suggest before I'm going to Sprint tomorrow and talk to them and then end up waiting a week before I get my new one? I'd like to get this resolved without having to change the phone out to get a new one, but if I have to, I guess I have.

    Thank you all,

    Ricky

    Well, here's a little update... I went to the Sprint store and he saw how * ty it was and actually asked me why I've stuck with it all night, heh. The only reason why I did is the nearest Sprint Store is 2 hours and a half from here where I live. So, I made the trip again today and low and behold, got a new pre and everything works on it perfectly. Now, I'm proud to say that I am a happy owner of pre.

  • I think I bought the wrong to adobe. I was hoping to edit PDFS and make arrangements for the signature and I get to do it with my current plan. Can I ask to sign up for the correct adobe?  I don't know what the creative cloud is all about

    I think I bought the wrong to adobe. I was hoping to edit PDFS and make arrangements for the signature and I get to do it with my current plan. Can I ask to sign up for the correct adobe?  I don't know what the creative cloud is all about

    Look at desktop applications Adobe Creative Cloud | Adobe Creative Cloud to see what is in the cloud and click on the names to find out what each

    Acrobat is what you use to create and edit a PDF file

    If that's all you want to do, you cancel your current subscription and then buy the correct subscription

    This is an open forum, not Adobe support... below to connect with Adobe personnel to help

    While the forums are open 24/7 you can't contact Adobe support at any time

    Chat support: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

    Don't forget to stay signed with your Adobe ID before accessing the link below

    Creative cloud support (all creative cloud customer service problems)

    http://helpx.Adobe.com/x-productkb/global/service-CCM.html

  • Can I make business cards and flyers of the event with this program? I think I bought the wrong thing... Help!

    I am familiar with older versions of Photoshop and wanted to download a version for my Mac make flyers and maps visit/menus for my coffee. I use a lot of pictures, but I think it's the wrong program as he looks nothing like anything I've worked with before. OOPS! Did I miss something or should I try to refund and buying back shares?

    And what exactly do I get if so? I'm not super skilled so a basic program is good for me!

    Thank you! ~ K

    Hi kelstardragon,

    If you purchased Lightroom, then this application is not good for the creation of Flyers or business cards.

    I suggest you take a refund and buy Photoshop, as it is the best application according to your needs.

    Kind regards

    Tanuj

  • I think I bought the wrong adobe software and wants to replace it with another.  I don't see any 'central form' availability on Acrobat DC, but my colleague has on an old Pro XI Acrobat.  I would like to communicate with someone at adobe to discuss.

    I think I bought the wrong adobe software and wants to replace it with another.  I don't see any 'central form' availability on Acrobat DC, but my colleague has on an old Pro XI Acrobat.  I would like to communicate with someone at adobe to discuss. Nee

    Hi Ion,

    Forms Central is longer now.

    FormsCentral

    A trial version of forms used to be installed as part of Acrobat PRO XI Central desktop application.

    It is no longer available and is not included in Acrobat DC, however, you can always create PDF using Acrobat PRO from DC forms.

    Thank you

    Tanvi

  • Hello Adobe think I should have ordered the wrong product. I just need to change it for a month.

    Hello Adobe

    My name is Joseph Barrington-Lew and I may have made a mistake.

    I want to change my PDF with the Ref. AD006710166AU but think I should have ordered the wrong product.

    I just need to change it for a month.

    Hi josephb28050365,

    If you don't need it for a month, you can try the free Acrobat DC 30 tickets free trial download Adobe Acrobat | Acrobat Pro DC.

    To cancel or Exchange the product, you must contact our customer support team, contact customer service.

    Kind regards

    Nicos

  • HP Photosmart D5360: I think I have the wrong cable to my printer

    I'm sorry I'm hogging this forum with a deluge of questions, but I may have found the problem.  The cables are the Staples store and they are probably not good. My mother has had this printer before I got it and I don't remember him having to replace the original cable. As a result, the printer lights. One end of the cable is a square that fits into the printer and the other end of it is a flat connector that does not anywhere on my computer. Should I go to Staples and get a cable better? Staples is a store selling computers and all the other products available. I think they lie here in the Canada.

    Thank you

    If your cable looks like this, you have the right cable.

    http://www.Amazon.com/AmazonBasics-USB-2-0-cable--male/DP/B00NH11KIK/ref=sr_1_3?ie=UTF8&QID=1464725032&SR=8-3&keywords=printer+USB+cable

    It is a USB cable from the printer.  Your computer "should" have a USB connector to fit.   Make and model of computer?

  • HP ENVY m6-1205dx: System disabled after the wrong password Admin

    Hello

    I write for the first time, so don't really know if its in line.

    My system has been disabled.

    HP ENVY m6-1205dx, Windows 8.

    A frozen after 3 unsuccessful attempts to enter the administrator password!

    Display types: System off

    [92025607]

    Please help as soon as possible.

    Hello

    Enter: 23983229

    Kind regards

    DP - K

  • Firefox I am a kid to think I touched the wrong choices thr relative to my age I was born in 1951

    When I tried to connect to firefox sync it prompted me to my age and finding not my year I took what I thought meant that I was older than 13, but suspect that it is less than 13 years that I am redirected to a page showing the regulations prohibiting the 13 to provide personal information. Now, I can't get past this to create an account?

    Have you tried to close and restart Firefox, and possibly clear cookies (accounts.firefox.com)?

  • We think our computer to upgrade from Vista to Windows 8, but not sure if photoshop CS2 will still work? also how do I save it in a change because they say that I need to do a full clean instalation and I will lose all programs!

    Not sure how this forum works? Did anyone see my question?

    If you are in urgent need of help CS2 so my suggestion would be to avoid the upgrade to Windows 8 If you ran it on a Vista machine already.  It is likely to complicate things and you may end up with a system that is incapable of managing these old software.

    You should see also the following about CS2 - basically, regardless of the copy you have is not a useful for a new installation.

    CS2: Error: unavailable activation server | CS2, Acrobat 7, hearing 3 -.

    l http://helpx.adobe.com/x-productkb/Policy-Pricing/Creative-Suite-2-activation-end-Life.htm

    https://helpx.Adobe.com/Creative-Suite/KB/CS2-product-downloads.html

  • A video that I shot is pixelated and fuzzy. I think I have the wrong codec.

    Hello!

    I shot images on a camera decent (not HD) - a Canon Vixia HFM30, it must have a decent image quality. I saw the regular difference between HD and video footage, but it's horrible. It was exported on a Mac on iMovie, then transferred to my Mac Book Pro. I tried to do some research online; He pointed toward the download or purchase the appropriate codec. Reading an article on Apple's site, it says to go to > Finder, then file, then > news > name and Extension to find the used extension. I don't see any extension. I know what they were referring. Here are a few links to articles that I met and I was not able to download anything useful, it does not download or does not help me.

    http://support.Apple.com/kb/HT3526

    http://support.Apple.com/kb/HT3523

    Forum USE.jpgForum USE 2.jpgThis image is a sceenshot of the film. Forum USE 3.jpg Thank you for your time!

    The link that I posted a little over an hour ago has nothing to do with Morgan

    Media Inspector is designed to tell you what's really inside your video

    Here is the link to redirect http://mediainspector.massanti.com/ (link above goes here)

  • hard drive HP envy dv6-7210

    Hello

    I have laptop dv6-7210 us. I have a problem with my hard drive. Makes me error 3F0.

    I tried the recovery kit, but then it gives me the error. Applicatio HDD not found anything like that.

    I am plannig buying a new hard drive. wanted to know if there are a few features.  I was looking at following.

    Please let me know if this is correct.

    http://www.Amazon.com/Western-Digital-caviar-cache-desktop/DP/B00461G3MS/ref=sr_1_3?ie=UTF8&QID=1410...

    Thank you.

    Here's what I found:

    http://www.Newegg.com/product/product.aspx?item=N82E16822236561

    http://www.Newegg.com/product/product.aspx?item=N82E16822136835

  • Dv6 HP-ENVY: I cannot adjust the brightness of the screen

    I can't reduce the brightness of the screen
    Even by FN + F2, F3
    I have a HP "dv6 HP-ENVY.

    may be the promblem with battery
    Help, please

    Thank you

    Hello

    Your language is good enough, don't be sorry

    Your Support page is not a listed Intel graphic driver. Your laptop came with 64-bit Windows 8 & I guess you clean installed Windows 7 64 bit, right?

    Your laptop has Intel/NVIDIA switchable graphics system. In this case, you can install the Intel graphics driver first & then NVIDIA driver HP supports the page. for example,.

    You can try this graphics driver Intel Intel directly. Download, save & install it. Restart the system.

    Then download, save & install the NVIDIA graphics driver. Reboot the system after installation of finishing.

    Check whether the problem is resolved.

    Concerning

    Visruth

  • HP dv6 7304se envy

    Can I change / update the graphics card for the computer laptop hp dv6 7304se envy?

    Your ' very welcome e.

    All you have to do is to read the service manual and to find the procedure to upgrade or replace the video card.

    You won't find a procedure to do so.

    This is because it is not a replacement.

    http://h10032.www1.HP.com/CTG/manual/c03591281.PDF

  • HP dv6 7210us envy I can't find drivers for win 7 pro x 64

    Hello!

    I bought HP dv6 7210us envy but I can not found that many drivers for win 7.  The following list.  Please help me.

    Thanks in advance for any information.

    Kontroler Ethernet
    PCI\VEN_10EC & DEV_8168 & SUBSYS_182D103C & REV_07

    kontroler magistrali systemem zarządzania
    PCI\VEN_1022 & DEV_780B & SUBSYS_182D103C & REV_14

    Kontroler sieci
    PCI\VEN_168C & DEV_0032 & SUBSYS_1838103C & REV_01

    Kontroler uniwersalnej magistrali szeregowej USB
    PCI\VEN_1022 & DEV_7812 & SUBSYS_182D103C & REV_03

    Kontroler uniwersalnej magistrali szeregowej USB
    PCI\VEN_1022 & DEV_7812 & SUBSYS_182D103C & REV_03

    Nieznane Urz±dzenie
    ACPI\HPQ0004

    Nieznane Urz±dzenie
    USB\VID_138A & PID_0018 & REV_0078

    Urządzenie PCI
    PCI\VEN_10EC & DEV_5229 & SUBSYS_182D103C & REV_01

    Hello:

    First install the AMD chipset driver and restart. You want the first file on the Web page.

    http://support.AMD.com/en-us/download/chipset?OS=Windows 7-64

    Then all the W7 x 64 drivers and software of this model will work also on yours.

    DO NOT USE ALL DOWNLOADS OF BIOS OR FIRMWARE FROM THIS LINK

    http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063&LC=en&cc=us&DLC=en&sw_lang=&product=5278261#N329

    You want to PCI\VEN_168C & DEV_0032 Atheros wireless driver.

    You want the driver Realtek LAN for PCI\VEN_10EC & DEV_8168.

    You want the driver for ACPI\HPQ0004 Protectsmart hard drive Protection

    Want driver fingerprint sensor fingerprint validity for USB\VID_138A & PID_0018

    And you want the card reader Realtek driver for PCI\VEN_10EC & DEV_5229

    All these drivers are located on the page of the driver for the above model.

Maybe you are looking for

  • How to erase a CD-RW with OSX el capitan?

    Unable to erase a CD-RW under EL CAPITAN

  • Computer guard boot in safe mode, following a bad virus

    Hello world.My laptop was recently infected by a rather nasty virus that stopped me being able to open my anti-virus (avast) software in order to get rid of it. There was a lot of other programs I could not open the internet including Explorer. I lef

  • SimpleSave 1 TB Drive

    I just installed a Simplesave backup device on my computer. (1 TB) The initial operation took place as announced. The drive was recognized, a backup and readers have been monitored and changed the backup files. The player off even when the computer w

  • Final need Defrag using information

    I know how to access Windows defragmentation. I know how a C:\ Defrag invites manually. I know how to set an automatic defragmentation schedule. I know that defrag will only work while it is inactive. What I don't know: (1) automatic annex is of (pre

  • Skype of Smartphones blackBerry for PB

    IS THERE ANY SOLUTION TO GET SKYPE ON MY PB? Thanks for your help