HP dv7 pavilliion: my desktop image appears only in stretch mode

Similar Questions

• my desktop image has ii in landscape mode. How can I change to the portrait. Using Windows XP

  I accidentally hit the keyboard and the image of the desktop screen changed to landscape

  I do not understand your post. You mean the desktop image is that of a landscape and you don't know how to change back or upside down image of the screen? If the latter (which is what I guess you really mean), then Ctrl-Alt up arrow or check the Settings applet display video card or a video card Control Panel applet. MS - MVP - Elephant Boy computers - don't panic!

• NICs not appearing only in normal mode and wireless not work not (witness still on orange)

  Hello all and thanks to anyone who responds! I'm pretty clueless when it comes to computers, so I hope it's just something simple.

  I am running Windows Vista Home Premium with a Presario F700. The processor is AMD Athlon X 2, processor Dual-Core TK - 55 1.80 GHz. 958 MB RAM and 32 - bit operating System.I don't know if you need this information but better safe than sorry. OK for the problem.

  The computer is supposed to be wireless, but I cannot make it work. When I go to Device Manager in a single Normal boot device shows. It is said: NVIDIA nForce 10/100 Mbps Ethernet #2. I'm not sure what that means, but he says that this device does not work correctly. I couldn't HP Wireless Assistant to work so I followed some advice that I've seen an uninstalled but that did not help at all. I'm sure that's not my firewall is disabled. And I use Norton Security, but I don't know which is not affecting him either since it was a problem before I installed Norton.

  Also, if I boot mode safe more things highlighted in Device Manager. For example, it shows these: card 6TO4, isatap.hsd1.fl.comcast.net, NVIDIA nForce 10 / 100 Mbps ethernet #2 miniport (IP) wide AREA network, wide area network (IPv6) WAN miniport, miniport Wan WAN (L2TP), miniport WAN (PPPOE), miniport Wan WAN (PPTP). But only in Safe Mode. Even if I try Boot Mode safe mode w / Networking they always disappear and it's the only one. I have tried everything I know how to do but I'm at a loss as to what prevents it from loading the Normal start.

  On a side note, someone said to make sure that the adapter is enabled in the BIOS and I checked and the only thing remotely sounding like a NIC is enabled. He wasn't that anything listed in the order of boot on an adapter until recently, and it's at the bottom of the list with an exclamation mark next to it. However, the exclamation point is now gone, but NIC is always at the end of the list. I also ran the check disk thing, and he came back fine. I ran a full scan of the system without any problems but a few tracking cookies. I tried to uninstall in safe mode and start back to normal to leave the computer to reinstall without success. I also used the option reset back to the factory. While time consuming which did not help either.

  If anyone has any ideas as to what I can I would be very happy. I'm hoping to give this computer to my brother as a Christmas gift. Sorry for the long post but I wanted to make sure I was as complete as possible to save everyone time. Thanks again. And if I missed any information please let me know and I'll fix it.

  If reset you to factory, it should work.  It is a switch broken (I don't him think) a motherboard problem or probable internal problems with the wireless. Take it to a store because it is a common problem with these computers.

• Can not get on my desktop backgrounds - appears only a black color background

  I wanted a new theme for my computer so I decided to download the theme of 'Bing Maps aerial imagery of Europe. " After that I started to download the theme everthing was always very well - background images for this theme were projected on my desk. However, for one reason or another, I then decided that I turn to my old theme - while images of the theme 'Bing Maps aerial imagery of Europe' was still in download. However, after the change of theme, background image has not changed. Instead, was projected to place a background image for the theme 'Bing Maps aerial imagery of Europe'. As a result, I tried to remove the theme of "Bing Maps aerial imagery of Europe", but, unfortunately, Windows does not repsond to this action. Instead, I decided to delete all the images - those whose who had downloaded. However there is now a black background that I can not change, even when I change the theme that I use.

  I also noticed that there is a "unsaved theme" that contains the background of black. However, this theme can not be deleted.

  Hi Jakethepake,

  By the description, you can not change the wallpaper. In order to quickly provide a solution, please answer this question:

  Did you do changes on the computer before the show?

  Follow the suggestions below for a possible solution:

  Method 1: You can follow the steps in the article and check if it works.

  Why can't I change my desktop background?

  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-change-my-desktop-background

  Also, try with a different theme and see if the problem still occurs.

  Method 2: You can follow the steps in the article and check if it works.

  Impossible to change the background image in Windows 7

  http://support.Microsoft.com/kb/2504610

  Method 3: I also suggest that you scan your computer with the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

   

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Important: During the scan of the hard drive if bad sectors are found, the scanner tries to repair this sector, all available on which data may be lost.

  It will be useful. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

• CS5: Image appears only in the magnification of 25% and 100%

  PS CS5 running successfully for a few years, then all of a sudden I can't work other than 25% magnification and the actual Pixels. The image disappears and I can only see the checkerboard. There is a "Windows update" I ran on 10 April, which included an update for the graphics card, which I think could be the culprit, so I uninstalled. It does not solve the problem, so I've updated again. I couldn't see anything else in these updates that should affect Photoshop.

  Here's what I've tried so far:

  I've updated my graphics driver (NVidia GeForce),

  Trashed Adobe Photoshop CS5 Prefs.psp (who crashed PS completely when I have opened it... Fortunately I kept the old file prefs on my desk and dragged in),

  Made sure Photoshop was up-to-date.

  Any ideas what to try next?

  Thank you!

  Photoshop CS5 (32-bit v.12.0.4)

  Windows 7 Home Premium (Build 7601 v.6.1: Service Pack 1)

  AMD Phenom II X 4 840 3.20 GHz processor

  This is a bug in the driver of your video card.

  Disable GPU drawing in Photoshop, or contact NVidia and understand what's wrong with the driver.

• The image appears only in running my application on device

  Hello

  use listfield where images are drawn.

  the images are downloaded from a url using Analyzer, these images are

  populated my listfield.

  It works fine when running my apps on my Simulator

  But doesn't work in the unit.

  WATS the problem?

  class Download extends Thread {
          private Vector urls;
  
          public Download(Vector urls) {
              this.urls = urls;
  
          }
  
          public void run() {
              try {
                  System.out.println("starting downloading");
                  for (int i = 0; i < urls.size(); i++) {
  
                      System.out.println("a part ofconstant url which is common " +i
                              + urls.elementAt(i));
  
                      imageData = getImage((String) urls.elementAt(i));
  
                      EncodedImage img = EncodedImage.createEncodedImage(
                              imageData, 0, imageData.length);
                      imageListElements.addElement(img);
                      System.out.println("image added");
                  }
                  System.out.println("\t\t Download completed");
  
                  UiApplication.getUiApplication().invokeLater(new Runnable() {
                      public void run() {
                          System.out.println("Pushing the list screen");
                          AscreenListFieldCallBack callBack = new AscreenListFieldCallBack (imageListElements);
                          _list.setCallback(callBack);
                          System.out.println("imageListElements.size() --> " + imageListElements.size());
                          for (int i = 0; i < imageListElements.size(); i++) {
                              _list.insert(i);
                              callBack.insert("imageListElements", i);
                          }
                          add(_list);
                          invalidate();
                      }
                  });
  
              } catch (Exception e) {
                  System.err.println("Msg: " + e.toString());
              }
          }
  
          public void startThread() {
              new Thread(this).start();
          }
  
          public byte[] getImage(String url) throws IOException {
              HttpConnection connection = (HttpConnection) Connector.open(url + ";deviceside=true");
              DataInputStream iStrm = connection.openDataInputStream();
              ByteArrayOutputStream bStrm = null;
              byte imageData[];
              int length = (int) connection.getLength();
              System.out.println("length --> " + length);
              if (length != -1) {
                  imageData = new byte[length];
                  iStrm.readFully(imageData);
              } else {
                  bStrm = new ByteArrayOutputStream();
                  int ch;
                  while ((ch = iStrm.read()) != -1)
                      bStrm.write(ch);
                  imageData = bStrm.toByteArray();
                  bStrm.close();
              }
              System.out.println("\n\n\n\n image Data  " + imageData);
              return imageData;
          }
      }
  
  }
  

  Once you start a download must be completed or throws an Exception.  I've never seen a communication process so nothing else.

  But you say:

  "in the console, it displays as started, but it is not downloaded.

  I suspect that your treatment is throw an exception.  Have you checked this while debugging?

  To answer your question later, yes there are limits of size of the files that can be downloaded.  The limit depends on the circumstances, but can be as low as 128 KB.  Of course, a picture of 128 KB is big enough, probably too large to display in a ListField.

  I think it should be clear that it is much more effective to send a picture about the right size for the BlackBerry.  That way you'll spend less time of transmission and, if you want to scale on the BlackBerry, the scale is much faster.

• (Impossible to write in the InDesign Server forum) - [Java/Corba] images appear only as gray box

  Hello, sorry to post here, but I can't post in the Forum ID. click on "post message" deletes the text...  We are working on our first plugin for InDesign Server. We create Documents with boxes and placing graphics (in PDF format) in this field. The problem is: after you open the document in InDesign, we see just boxes grey and without pictures. The links in the document are ok and when we print, we see the images. In my opinion, the internal preview of graphics are not created. Printing uses the original file, and there we can see the image.  In the code, we create a rectangle with addRectangle() and place the image with the command place(). Is there anything else that we have to see the image in InDesign?  Thanks for all the ideas Klaus Friese

  Hi Klaus,

  Take a look at the following to be called at startup:

  InterfacePtr iServerSettings (iSession, UseDefaultIID());
  If (iServerSettings)
  iServerSettings-> SetImagePreview (true);

  Best,

  Peter

• How can I remove a button junk, seemingly permanent of my quiz results page that appears only in the mode to publish?

  When I publish my project, on the results of the quiz at the end page there is a button "continue". It does not appear in my project in edit mode, play or preview. I wouldn't mind so much and might be prepared to ignore, except that it is biased, oversized and distorted (so it looks unprofessional). I can't find the obvious culprits in quiz settings properties or properties. Anyone any ideas as to how this key came to appear in published mode and, more important still, how get rid of?

  I hope it works, but when you re-read the thread, you'll see that I would never drag the button off the slide to score because of its importance. You can make invisible on the slide by changing its fill and stroke. And make very tiny.

• Carousel image showing only the arrows on Mouseover

  Hey there, title says it all. I am looking or the other

  • A Widget
  • Include a JS

  which allows the arrows in a carousel image appear only when the mouse plane on the carousel (so not only when the arrow is!).

  Thanks for your help, < 3 people

  You can find this useful: FlexSlider 2

• Why are graphic line not appearing in the Preview Mode when they show in Normal view?

  I use CS4, InDesign I used it for 4 years. I can't understand why this is happening...

  In the tools Panel, I use online tools and circle. Drawing circles on my paper with a weight of 1 race and lines (arrows). The lines are the top item on my page, the last thing I draw. I draw lines that more would go not only to other graphics, but on the text as well.
  

  Problem is that they appear only in Normal mode, not the preview mode. Therefore, I don't think that they will appear on the final document.

  I have often used these tools, and the lines that do not display is a new problem. Can someone shed some light on why this is happening?

  Thank you, Louise

  
  

  I see two possibilities. You put them on a layer that is set to non-printable or you put inadvertently from the default value of the tool for non-printable in the Panel.

• the option 'Show images' appeared at the top of some emails. My only option now is to show the e-mail on a web page. I would like to recover the original option.

  display images in windows mail

  Until recently, the option 'Show images' appeared at the top of some emails. My only option now is to show the e-mail on a web page. I would like to recover the original option.

  The problem is that IE9 has been installed by Windows Update and its not not watch 'bar info'.  See www.oehelp.com/OETips.aspx#15 for workarounds.

  Steve

• sidebar on the desktop are not displayed images of only a red cross

  sidebar on the desktop are not displayed images of only a red cross

  Take a look at the following:

  Sidebar will not run on start up
  http://www.Winhelponline.com/blog/fix-Windows-Sidebar-does-not-start/

  
  Component cannot start Windows Vista

  http://www.Vistax64.com/tutorials/117192-Windows-Sidebar-will-not-start-Vista.html

  Sidebar Gadget not working not properly
  Note: look for responses from the veebull
  and president of the DNA
  http://social.technet.Microsoft.com/forums/en/itprovistadesktopui/thread/5d734cdb-757f-4801-8f28-3cca36ccf7ba

  How can I restore windows sidebar
  http://support.Microsoft.com/?kbid=963010

  How to fix broken sidebar
  http://www.howtogeek.com/HOWTO/Windows-Vista/how-to-repair-your-crashed-or-hanging-Vista-Sidebar/

  From: Daniel Martin
  http://social.answers.Microsoft.com/forums/en-us/vistaappearance/thread/802e24fe-4DD3-4EE3-b2b5-5eba88595598

• Is there an easy way to create "the mouse on the text, to display the image" without coding it? I want an image to appear only when you move to a line of text. I found the code for it but I want to find an easier way. Thank you!

  Is there an easy way to create "the mouse on the text, to display the image" without coding it? I want an image to appear only when you move to a line of text. I found the code for it but I want to find an easier way. I'm creating a home page with a list of text links. I want to design as well as in the overview of one of the text links, a corresponding image is displayed to the right of the page. I also need a default image to rest all the time unless one of the other links text is hovered over. Thank you!

  Try to use a Widget for Composition in the Adobe Muse Widgets Panel.

  I would like to start with a blank publication.

  Place your text in the button area.

  Place your image in the display area.

• Try to reinstall Adobe Design Premium Web.  I have the serial numbers for this product.  Download image appears on my desktop.  Click on the image and 'unrecognized image' help!

  Try to reinstall Adobe Design Premium Web.  I have the serial numbers for this product.  Download image appears on my desktop.  Click on the image and "unrecognized image '.  Why?

  Please try to download Creative Suite 6 applications and start the installation.

  Please let us know if you are unable to install it.

• Why Tweets incorporated on news sites appear only in the empty boxes?

  Tweets incorporated on news sites appear only as empty boxes in Firefox, but not in Edge: it of a fairly new problem and can have coincided with the upgrade to Windows 10.

  Please try Firefox Safe Mode to see if the problem goes away. Firefox Safe mode is a troubleshooting mode that temporarily disables hardware acceleration, restores some settings and disables add-ons (extensions and themes).

  If Firefox is open, you can restart Firefox Safe mode in the Help menu:

  • Click the menu button

    

    click Help

    

    then select restart with disabled modules.

  If Firefox does not work, you can start Firefox in Mode safe as follows:

  • On Windows: Hold down the SHIFT key when you open the desktop Firefox or shortcut in the start menu.
  • On Mac: Hold the option key during the startup of Firefox.
  • On Linux: Exit Firefox, go to your Terminal and run firefox-safe-mode
    (you may need to specify the installation path of Firefox for example/usr/lib/firefox)

  When the Firefox Safe Mode window appears, select "start mode safe."

  

  If the problem is not present in Firefox Safe Mode, your problem is probably caused by an extension, theme or hardware acceleration. Please follow the steps described in the section Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems to find the cause.

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

  When find you what is causing your problems, please let us know. This might help others with the same problem.