HP DVD A DS8A9SH SATA CdRom Device not recognized by my laptop

All of a sudden, my laptop does not recognize my CD / DVD player

What can I do?

HP laptop with windows 8.1 455 OS

Advertisement

Hello:

Please see if the steps following resolution 2, 3, 4 or 5 to solve the problem.

Normally, one of them will.

http://support.Microsoft.com/kb/314060

Tags: Notebooks

Similar Questions

  • HL-DT-ST DVD-RAM GH40L SCSI CdRom Device does not work code 32

    HL-DT-ST DVD-RAM GH40L SCSI CdRom Device does not work Code 32

    The other post:

    HL-DT-ST DVD-RAM GH40L SCSI CdRom Device does not work, another driver can provide this functionality. (Code 32)

    Hello

    1 are there any changes or updates made on the computer?

    2. when exactly you get the error message?

    Code 32: a driver (service) for this device has been disabled. Another driver can provide this functionality.

    I suggest to return the item and try to run the fix it and check if it helps.

    Your CD or DVD drive cannot read or write media

    http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

    Let us know if it helps.

  • CD or DVD drive is missing or is not recognized by Windows

    Original title: another question about the DVD drive is not detected in Windows 7

    I have the same problem that many others have described here on the DVDR drive not detected after installing Windows 7. I still have not solved this issue. But I have another similar problem. The system will not recognize an external USB DVDR drive connected to a USB port. In essence, I have no access to the internal drive (in a Dell Inspiron 1545) or the external hard drive. Without access to a DVD player I can't even uninstall Windows 7, and I can not install or save anything else without a drive. I'm at my wits end. If anyone can help I will shower you with praise.

    Hi Therevmrbill,

      
    Scenario 1:
     
    Reference:

    Your CD or DVD drive is missing or is not recognized by Windows or other programs.
    http://support.Microsoft.com/kb/982116
      
    Scenario 2:

    1 try to connect the DVD USB drive on another computer and check if the problem persists.
    2. try to connect other USB devices to the computer and check if it is detected.

    Try to run the troubleshooter and see if the problem is resolved.

    Thank you, and in what concerns:
    I. Suuresh Kumar - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • PRS-600 USB device not recognized

    I am unable to get ereader PRS-600 to be recognized by the computer (Win7).
    I tried to update the software (even if I think it's in)
    (date) but the window 'connect a PRS-600 to update' does not progress and the update button is dimmed.
    I deleted the "unknown device" in the drivers, but when I reconnect the USB cable and the ereader, I always get the display of device not recognized and the message "USB device not recognized".

    I seem to have solved the problem. I contacted Sony through esupport and a chat with a tech.

    Make sure that the battery has some charge inside. Completely charge if you can.
    Stop eReader (fully)
    Remove the SD card
    Press the button Reset (at the bottom of the ereader)
    Turn it on
    While the display shows "Open book", at the same time press the button to "turn the page" (back) and the Volume button until the "Reset All" + screen
    Enter 'Yes' to reset the ereader. You may need to configure the screen (X button with the tip to draw at various points)
    If you charge the battery, you may need to contact the support chat for sorting.

    Good luck!

  • Installation of XP Prof on Tecra A9 PTS52E - SATA HDD is not recognized

    Hi all

    I have a "nine" Tecra A9 (PTS52E) with Vista Business installed. However, I need XP Prof and a CD of XP - SP2 slipstreamed. The SATA drive is not recognized XP installation, so I need a driver of "F6."

    There are a lot of howtos on this for the 945 chipset, but I couldn't solve this problem on my A9 (Mobile 965 Express Chipset). I don't want to buy a USB floppy for one-time-installation drive. So I have to build the driver (iastor.sys and more) in the XP installation disc.

    A few problems: there seems to be no easy way to do this, because intel only provides files *.inf for the ICH8R (RAID =) controller, which does not exist in the A9. So I have to change the *.inf files, correct?

    Another thing: I saw in an another post here the discussion on switching to AHCI in the BIOS in compatibility mode. I can't find a way to change this setting.

    Aargh, I need this laptop for my work on an A8 (which is also mine), I installed XP without any problem.

    Can anyone help?

    Thank you

    Michael

    Post edited by: michael-cologne

    Nice info I m interesting in the XP installation process.
    It would be great if you could post a few steps.

    Thank you

  • His number disappointed + B500 USB device not recognized at startup

    Hello

    We have 2 B500

    whenever I'm starting, after loading windows they give me an error "USB device not recognized" I don't know what to do any help will be greatly appreciated as it is strange that both machines are giving the same error.

    also on one of the machines the sound does not work, I tried to get out of trouble, the diagnostic says the speakers are working properly, but not her out at all.

    I'm kind of disappointed by these questions, we always buy at Dell, but we thought we would give Lenovo a chance, the machines were barely a few months, when the problem started.

    advice please?

    That error usually comes up when a non bootable USB device is connected. Check the Bios and make sure that the CD drive and HARD drive are loading first. That should solve your problem. If this is not the case, make sure that you don't have any USB stick or disk external HARD connected until the PC load.

  • Satellite L30: Usb device not recognized

    I have a problem with my laptop L30.
    When I connect my phone or a flash drive or external hard drive, it is said: Usb device not recognized one of the usb devices malfunctioned.
    Tried to reinstall windows did not help...

    is there a solution?

    Hello

    Hmm. First of all, you should unplug all external USB devices.
    Then go to Device Manager and remove it all concentrators root USB and USB host controllers.
    Reboot the laptop.

    After this procedure, the operating system should recognize and should install new ports.
    Now you can connect to a plug - and play instruments. These devices should be recognized automatically. But some external USB devices need additional drivers.
    Usually these drivers are provided with the USB device.

    I would recommend this review if necessary!

  • USb device not recognized / Power surge on hub port

    I don't have the slightest idea what happened here, but when I plug my defy in a PC all I get is 'USB device not recognized '.

    and I can't connect to usingf a P.C.

    Ive tried to re-satring the phone and the PC, ive tried also in another PC and it did the same "USB device not recognized"

    Ive tried to download the drivers, restart Phone bot and Paolo and still "USB device" unrecognized on the two p.cs.

    Ive also tried the USB debugging on the phone mode, but after a short pause, "Unrecognized USB device"


  • mass storage device not recognized

    my computer does not recognize a storage device. How can I solve the problem.

    I found the answer under "related topics - USB Mass Storage Device not recognized " and it solved the problem!

  • USB device not recognized. unknown device

    USB device not recognized, peripheral unknown.  I can not connect any USB

    If no USB device does not is that you need to install drivers of motherboard (chipset) or your USB ports on the motherboard failed. Since you have told us nothing about your computer, it's as specific as I can get. See the links in general troubleshooting below and if they do not help, post back with the missing information by:

    Help us help you:

    http://www.elephantboycomputers.com/page2.html#Tech_Support - See the article "how to write a Post.
    http://support.microsoft.com/default.aspx/kb/555375 - how to ask a Question

    Troubleshooting USB by Uwe Sieber -http://www.uwe-sieber.de/usbtrouble_e.html

    General USB troubleshooting in Windows XP -http://support.microsoft.com/?kbid=310575

    MS - MVP - Elephant Boy computers - don't panic!

  • USB device not recognized (Nothing plugged and the mouse does not)

    My mouse (microsoft) wireless worked well until what within hours.
    then I said to unrecognized USB device
    The port works, but for some reason any
    the mouse is not, went bought another mouse and still getting the same message.
    Plus I get the USB device not recognized pop up, same
    Tho, nothing is plugged into one of the USB ports.
    Any suggestions on how to solve this problem

    Computer brand and model?  Windows OS?

    Open the Device Manager

    Click on the + sign next to USB controllers

    Do you not see that unknown device listed?

    Right click on the playlists of USB root hub

    Select uninstall

    Close Device Manager

    Restart the computer to Windows reload the drivers

    USB is now recognized?

    If failed, shutdown computer.  Unplug it from the electrical outlet.  Leave unplugged for 1 to 2 minutes.  Plug the unit in and restart the computer.

    USB is now recognized?

    How to troubleshoot USB device problems that can occur after a laptop computer that is running Windows Vista recovery from sleep or standby extended

    http://support.Microsoft.com/kb/953367

    Windows Vista does not recognize a USB external optical disc drive when you reconnect the USB optical drive to the computer drive

    http://support.Microsoft.com/kb/944292

    Run the System File Checker

    Right-click on command prompt and select run as administrator

    Type sfc/scannow

    Press enter

    Note: there is a space between sfc and / scannow

    How to analyze the log generated by the SFC Scan file:
    http://support.Microsoft.com/kb/928228

  • USB Device not recognized Hp OfficeJet 6600

    Hello all - I use my desktop Hp 6600 (connected via usb) jet and my computer (dell E6430 latitude) says that it is a usb device not recognized.  I tried a lot of troubleshooting, including the removal of usb controllers and reinstall, but which doesn't seem to work.  I'd like to help as soon as POSSIBLE. Again, I must keep my printer cable, because the network, I refuse the acess printers or something like that.

    Thank you

    J

    Hello

    If I understand correctly your computer does not detect the printer. You can try the following steps and check the results.

    1) inspect the cable USB and connection:- icon on the USB () facing up when the cable is connected to the product correctly. Check the back of your product and the back of your computer to make sure that the USB cable connects correctly and safely.

    After that you make sure that the USB cable connects correctly and safely, consider the following guidelines to check other potential problems associated with USB:

    • Connect any other USB device. Connect any other USB device to the computer and check if it is detected.
    • USB ports on the keyboard. USB ports on the keyboard and on the front of some computers is maybe not powerful enough to support the product. If the USB cable connects to the USB port on the keyboard, try to connect to it in another USB port on the computer.
    • Length of the cable USB. HP recommends that the lower USB cables or equal to 5 m (16 ft 5 in) long. However, a USB cable which is 5 m (16 ft 5 in) in length must be of high quality. Otherwise, HP recommends using a USB cable that is less than 2 m (3 ft 3 in). Do not use connection cables to increase the length of the cable. Use a powered USB hub, if you need more length.
    • USB ports replacing. Connect the USB cable to a different port on the computer to make sure that the USB port on the computer is not the cause of the problem.
    • Defective USB cable. Replace the USB cable to ensure that the existing cable is not defective.
    • Conflicting USB ports. Disconnect all other USB, USB, USB cameras scanners printers and all other connected USB devices. Start the connection of these devices one at a time to determine if the devices to use too much power. Plan to buy and install a hub USB powered if necessary.

    (2) power Off and power of the device.

    (3) update the Windows Device Manager:

    (a) click Start (for Windows XP) or the Windows Logo (for Windows Vista and 7), and then click run. The run window opens.

    (b) in the Open text box, type devmgmt.msc and press ENTER. The Windows Device Manager opens.

    (c) lists to look for your HP printer in Bus USB controllers or other devices .

    (d) right click on the entry for device to device/unknown HP and then click on set to update driver. The material up to date hospitality Assistant opens.

    (e) select install the software automatically and click Next. Follow the on-screen instructions to complete the refresh Device Manager.

    (f) repeat these s for all entries of device with a yellow exclamation point.

    (4) delete the temporary files and folders.

    (5) disable some startup items: -.

    (a) click Start (for Windows XP) or the Windows Logo (for Windows Vista and 7), and then click run. The run window opens.

    (b) in the Open box, type msconfig, and click OK. The System Configuration Utility window opens.

    (a) click on the general tab, click Selective startup.

    (b) if there is a check next to load startup items, select the check box to remove it.

    (c) click on the Services tab and then click on the hide all Microsoft Services check box.

    (d) click Disable all.

    (e) click on apply and then click Close.

    (f) restart the computer.

    (6) make sure that the Plug-and-Play Service is activated: -.

    (a) click Start (for Windows XP) or the Windows Logo (for Windows Vista and 7), and then click run. The run window opens.

    (b) in the Open box, type services.msc, and then click OK. The Services window opens.

    (c) to seek the 'Plug-and-Play services' and check if the status is started.

    (d) if the status is not started, then right-click on it and select start.

    (e) once on the way out of the window.

    (7) uninstall and reinstall the printer software.

    (8) re-enable the startup programs: -.

    (a) click Startand then click run. The run window opens.

    (b) in the Open box, type msconfig, and click OK. The System Configuration utility window opens.

    (c) click the general tab, click Normal startup.

    (d) click the Services tab, and then select the hide all Microsoft Services check box.

    (e) click applyand then click close.

    (f) click on reboot to apply the changes to the next time the computer starts.

    (9) try to install the software on another computer.

    Although I am an employee of HP, I speak for myself and not for HP.

    -Say 'Thank you' by clicking on the star of congratulations in the post helped you.
    -Please indicate the position that solved your problem as "accepted Solution".

  • USB problem-"USB device not recognized".

    Original title: USB problem

    I have a problem when I connect my nokia mobile to my pc via USB cable there is a display of msg of error "USB device not recognized.how to solve this problem? I tried all reboot pc, reconnect the device, format XP and reinstall.last night I was using a mobile navigation correctly with the same device same system same cable.i have tried driver re install but not fixed yet.i have Windows XP 3 intel p4.please help.

    Hello

    1. Are you having the same problem if you connect a drive flash or any other device?
    2. Have you tried plugging in Nokia mobile on another computer?
    3. Have you tried plugging it into different USB ports?

    I suggest you send more information to help you better.

    You can also refer to:

    A computer that is running Windows XP cannot detect a USB, an Apple iPod flash drive or an external hard disk drive.

    http://support.Microsoft.com/kb/925196

    USB port may stop working after you remove or insert a USB device.

    http://support.Microsoft.com/kb/817900

    .

  • How do I update driver for printer Epson Stylus C43 Color inkjet (USB device not recognized)

    I run Windows XP Home Edition and have a printer Epson Stylus C43UX Color.  Quite often, the printer connects, is recognized by my laptop and works very well, but sometimes, when I connect and turn on the printer, I get a ball on the toolbar "USB device not recognized" State the Device Manager shows the printer as an unknown device and in the State of the device properties is no indication 'no driver installed for this device.  I uninstalled drivers and enforcement "Looking for new hardware" menu Action of the Device Manager has received the balloon message "new hardware found: your hardware is installed and ready to use. Try to then print the results in a "Communication error" message and the printer fails to print.

    Hello


    You did changes to the computer before the show?

    Method 1:
    Try the steps in the link and check.
    Advanced troubleshooting tips for General USB for Windows XP problems
    http://support.Microsoft.com/kb/310575

    Method 2:
    You can update the drivers on the manufacturer's Web site and check.
    See the link to update the driver:
    How to manage devices in Windows XP
    http://support.Microsoft.com/kb/283658
    Manufacturer link:
    http://www.Epson.com/cgi-bin/store/support/SupportIndex.jsp?BV_UseBVCookie=Yes

    Method 3:
    Try the steps from the link and check if you are able to print.
    Printer in Windows problems
    http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  • Your CD or DVD drive is missing or is not recognized by Windows or other programs

    I tried to apply the patch, MicrosoftFixit.dvd.Run.exe. He could not say "NET Framework initialization error. Unable to find a version of the runtime to run this application. If this is related to the framework version number .net (such as published in some issues) then Microsft back compatible fix to the problem. It should give a step-by-step procedure to solve these 2 problems. Microsft say DVD problem was know question and it was fixed in XP SP2. I installed Windows XP with SP2 and now updated to update to SP3. But the problem persists. Any help from anyone?

    shanglur,

    If you have installed all Windows updates, there's no upper/lower filters to delete, you can try...

    Your CD or DVD drive is missing or is not recognized by Windows or other programs

    But it's almost the same thing as above. I suspect that your cd/dvd drive may have failed.

    Rick

Maybe you are looking for

  • Restore previous session button on "subject: House ' stops working

    to clarify, I can always restore session by making history > restore previous Session but it is not as intuitive that have start to the top of page on everything: home and press just this big button 'Restore previous Session' blue It happened all of

  • All hacked with Ransomware on Safari?

    On March 4, I got a blue screen telling me to call the representative of Microsoft listed immediately to unlock my Mac Mini I was on Safari but all locked except the blue screen.  Then a record came through my speakers explaining that I have a seriou

  • Portege M750 - how to upgrade to Windows 7 without preinsatlled Vista?

    I have a laptop Portege M750 who had professional Vista on this subject.I removed vista and installed the RC of windows 7 Now I have received the final windows 7 vista upgrade but can not install via Win7rc or independent to have vista first.I don't

  • Satellite A200: Charging problem

    I have Toshiba Satellite A200 and recently I got some software with charging problems :( When the battery is on 96-99% it does not start when I plug the charging cable (and says that the battery is at 100%).If it is less than 96%, it starts to load,

  • 2 phones sauvegardΘ 1?

    can you run 2 iPhones for a return to the top? or will they conflict?