HP EliteBook 820 G3: HP EliteBook 820 G3 - no USB Boot

Similar Questions

• Ports of USB 3.0 EliteBook 8470p not recognize USB 3.0 devices

  USB 3.0 ports 8470p EliteBook located on the left side of the PC (near the ms in) is not recognizing the USB 3.0 devices.

  Operating system is Windows XP Professional SP3 and the BIOS has been updated to the most recent available on HP website.

  Any suggestions please?

  Thank you.

  It just occurred to me that I had missed a vital part of your first message, the words:

  OS is XP pro.

  XP pro can't stand NOT the USB 3.0

• HP Elitebook 8570p - Windows XP USB very slow and the transfer rate performance issues.

  Hello. I was wondering if anyone else knows some performance issues with the HP Elitebook 8570p and Windows XP Pro - SP3.

  I get a VERY slow start, general poor performance (waiting time when opening files and programs).

  I asked to burn in tests that show that everything is good.

  USB transfer rates are VERY slow (tried all ports of a Seagate FreeAgent USB drive, which works fine on other laptops etc.) for example a 30-minute transfer a 7gig single file of the USB HD on the desktop. Only 3 minutes to do the same on another laptop.

  I think there are problems with the drivers, like Windows 7 works very well and does boot from a bootable USB.

  USB transfer rate are also good when starting from a Windows boot environment.

  I installed HP SoftPaq Download Manager, and all the drivers are up to date.

  Hello:

  I think outside of the box here... Select the Intel (r) 7 Series Chipset Family SATA AHCI Controller instead.

  If it does not, I raise the white flag.

  Paul

• EliteBook: can I use a boot cd on a portable computer with disk encryption?

  Windows is sprinkled on a laptop with disc encryption.  Is there a way I can use a boot cd to access the drive?  I want to get some files off it first.

  Ok.

  Then the simplest solition would be to remove the hard drive, put in a drive enclosure hard or on a USB to SATA connector.

  Now you can plug it into a usb port of another Windows PC or laptop to your business.

  Use Windows Explorer to access the disk. When the encryption key is requested, type it in.

• HP Elitebook 8470p BIOS password reset

  Hello

  Can help you with a BIOS reset on a HP Elitebook 8470p password

  Serial number: [edited by Moderator serial number]?

  Thanks in advance.

  Thanks, but unfortunately did not work.

  Have registered a case with HP, answer below, waiting for answer:

  Hello

  Here are the steps to create USB Bootable USB drive and use the HPREADID for the information. TXT file.

  You need create the boot USB device and run the HP ReadID since the USB boot device. Here are the instructions step by step to get the necessary information.

  1. Connect a USB device to the USB port on the computer
  2. Run the Application HPUSBFW. EXE
  1. Ensure that ""device "' > > ' File System" : FAT 32 and > > "" Volume Label " is filled in as seen in the image above."
  2. Select/check mark > > create a boot BACK disk
  3. Select Browse and locate the file extracted USB Boot > > Files BACK into the system.
  4. Select OK and select the Start button
  5. Click on the " Yes" option to format the USB key (* Note all existing data on the USB key will be lost) ""
  1. USB drive will begin with the message 'Formatting the device' (* Note: this process will take a few minutes)
  1. You should see a Message format complete successfully
  1. Click the close button to exit the application.
  1. Now copy the file P32015_hpreadid.exe from the screen on the USB.
  1. Connect the USB device to the system, and turn on the device.
  1. Press ESC on the keyboard to bring up the START MENU
  1. Then select the F9 option to bring up the OPTION of START MENU
  1. Select the DRIVE HARD USB and press enter
  1. You should see a prompt C:\ .
  2. Enter the following command to C:\ guest
  3. C:/HPREADID.exe Press ENTER to get the information to display on the screen
  4. C:/HPREADID.exe > info.txt and press enter-T his saves the file on the USB key as info.txt
  5. Ask to Email us with the file Info.txt of new measures on the issue.

  Once you have the info.txt file, please send us the same as an attachment. Please let me know if you need help on the case.

• EliteBook 840: unable to boot from usb flash

  Hello:

  I'm tempted to boot from USB drive to install a new version of Windows 7. When I press F9, I have only two startup options:

  -Computer portable hard drive

  -Computer laptop Ethernet

  The USB boot option do not appear.

  My BIOS Version is: 01.04 worm. M71 (24/02/2015)

  Note: I tested my USB key installation in the other laptop and it works very well.

  Thank you for your support.

  cherrera51 wrote:
  

  Yes, I know Rufus. How I said, I tried my USB in another laptop (a HP ENVY m4 laptop) and work very well. The difference is that the HP ENVY gave me the option to boot from USB and the EliteBook does not.

  I realized that, since the post, you did.

  I suggested RUFUS and EFI create setup of windows due to the startup problem, that you have with the Elitebook 840.

  It may be just what you need for this particular laptop.

  If you want this to work, then you must be flexible and willing to solve the problems.

• dv4t-5100 (A9Q30AV): HP DV4t-1500 recovery

  1A the question: How can I use the Image on a recovery partition (D to repair the Image of the Win7 OS (C without having to start first in Image OS Win7?))  I was able to create a system repair disc, while the system has been started in Win7 temporarily.

  Question 1(b): can I first try to fix just the Win 7 OS image (C vs did a new install (destroys all the data for the current user and installed SW)?)  I guess I boot the system by using the system repair disc/DVD (boot change to have the DVD to boot before the start of the HARD drive).

  Question 2: Is there a way to create a set of Win 7 OS install disc (DVD - Windows 7 64B Recovery Kit/3 DVD) using the Image to install on the recovery Partition (D without boot in Win 7 OS and running the Recovery Manager (rebecca.exe) on my system dv4t (for example copy/replace the Recovery Partion on my g6 Pavillion) with the data of my Partition Recovery dv4t (D.))  See bleow options to copy the recovery Partition (file copying or using Copy Utility, then the HARD disk partition)?  I already created the for the g6 Pavilion recovery disk, but not the dv4t).

  Background

  -Blue system projected with a Kernel error and would not reboot (Normal Mode and Safe Mode) again.  Ran offline SMART test drive HARD fast/short, stopped with error 303 (Toshiba 2.5 HDD 500 MB).  Indicates that the HARD drive is dying.

  -Deletion of dv4t HDD and mounted on my Elitebook 8460p using a USB 2.0 to SATA adapter.

  -J' have managed to copy all files from the user, I was interested on a 1 TB portable HARD drive (~ 320GB).  Now able to painfully deliver my whole system (new install, reinstall all the SW, then put data into the required location/directories).  Not as desirable that repair Win 7 OS image and then make a System Image backup, replace the HARD drive and restore the System Image backup.

  -Ran chkdsk on the drive HARD dv4t (read-only).  No problem with step 1 (checking files).  Step 2 (checking index) were 4 errors (all the same index/130$, 2 files 94467 and 270145 impacted).

  -Ran chkdsk/f, to correct the errors.  Index corrected $ 130, both files 94467 and 270145 adjusted.  In stage 2, after

  SD/SIDs checked and checked the USN Journal, he has spent a lot of time correcting errors in the Volume Bitmap.  I left the program before he completed the correction of the Volume bitmap (took more than one night).

  -After the chkdsk /f.  I put the HARD drive in the dv4t and he was able to start completely new in Win 7 (normal start-up).

  -C' is when I created the system repair disc)

  -system was very slow.  responds very slowly.  I did not start the Recovery Manager (rebecca.exe).

  -After a while, the system crashed again, I was not able to completely reboot in Win 7.

  ((- for restart, see you file loading, logo Win 7, then finally will get message that Windows did start no successuflly the last time, then option 1) repair BONE or 2) normal start.

  -made him remove the disk HARD again, ran chkdsk in read-only, view errors, error correction.  Now, I have been through a few iterations of it.  I have failed to launch the Recovery Manager to start the creation of the recovery for the dv4t diskette.

  -knowledge I can order the Kit for $25 HP recovery disk (you can assume that I used to work for HP for a long time).

  -I would first try to repair the image of Win 7 OS first before giving up and do a fresh install and destroy all the data on the C: partition (I'll also have to replace the HARD drive, when the time comes).

  Thank you

  -

  I have 2 laptops: Pavillion dv4t and g6.

  I have a set of recovery disks (5 DVD) created the G6 on for the g6.

  My dv4t does not start in Windows 7.  I don't have to create the recovery disk (3 installation DVD with the operating system disc) before their start dv4t.   I was able to create a system for the dv4t repair disc, but did not create set of recovery disks (3 DVDs, including the OS image and peripheral dv4t installable drivers).  The recovery Partition (D of the dv4t HDD doesn't have a problem (chkdsk passes).)

  Why can't I fly over the recovery Partition dv4t to Pavillion g6 HARD drive using Disk Imaging software like Acronis to off the shelf and then start the g6 Pavillion and run Recovery Manager (rebecca.exe) and create the dv4t Recovery Disc Set (3 DVD)?

  Thank you

• How can I remove password on startup, which is the same as my Windows login password.

  I would like to know how to remove this password to start irrtating HP which is always appear on my Elitebook with ProtectTools.

  I just it is gone, it is so boring, I wish that I never installed ProtectTools.

  I tried to remove it, but this startup password is always THERE and when I go into the bios, I tried to reset the settings, and now the option to boot from USB is disabled. I am not connected as a guest in the bios, but as a user I think with my windows password some how, even though I have already uninstalled all that shit.

  I just want to remove my bios boot password, wipe the system and reinstall windows 7.

  At this point, I booted up, type the startup password, then the password windows, now connected, I reinstalled ProtectTools and I try to take it off from there, its all if frustrating because I have a lot of work todo and cannot until this is resolved.

  Please HELP me enable usb boot and the removal of the startup password. Thank you.

  PS. I also have unisntalled hp digitalpass, security shipped for hp, Privacy Manager, validilty of fingerprints, disc encryption and protects 3d hp. I can't understand this, and I'm in a big hurry to get a project for work.

  Well I figured it with technical telephone support, had to log in as guest in the bios, not as user and reset to the factory settings, press f1 one or two times to remove the biometrics, etc. and got my USB works on boot options

• 3rd party msi installers fail to install on windows 7

  I am unable to install any software that uses an .msi extension. For example, Endnote X 3 fails to install with Error 1935 in Microsoft.VC90.CRT. This happens also with Python 2.6.1. All these errors occur at the stage of 'publication '. In addition, some updates do not settle - like XML SP2. My installed updates screen is also blank. I'm running Win 7 Ultimate on a HP elitebook 8530w with a dual boot Win XP.

  Help, please

  Thank you

  See my answers to your other thread: http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/ef286abf-6954-4740-901b-23107070903e/

  Ideally, you'd have only 1 a current thread on the computer in question. A moderator can choose to merge the two threads.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• HP Elitebook 820 G2: Get drivers, software and firmware error page.

  Hi, I had this problem while HP go for HP Elitebook 820 G2

  A click on > download options > Get drivers, software and firmware... I get this error page

  http://h20565.www2.HP.com/hpsc/SWD/public/readIndex?sp4ts.SN=5CG5435L98 & sp4ts. OID = 7343194 & lang = to & SP...

  Downloads for this product are not available through this Web site.

  For the company's products, you can find English American filing of HPE software downloads.
  For the HP products and home offices, visit the HP customer service.
  If you need additional assistance, you can contact your local HP representative for more information on the specific update methods available for this product.

  @JimmyC

  Try here.

  http://h20564.www2.HP.com/hpsc/SWD/public/readIndex?sp4ts.Oid=7343194 & swLangOid = 8 & swEnvOid = 4192

  REO

• HP Elitebook 820 G3: What size of SIM card

  My new Elitebook 820 G3 has a slot for SIM card on the RIGHT side. I tried on a size full card SIM inside, but the slot is too small. What size SIM card is supposed to fit into this slot machine?

  I resolved to myself. It's a micro - a poor card.

• EliteBook 820 G3: stylus for Elitebook 820 G3

  I want to buy a pen for my G3 of 820 Elitebook and would appreciate any suggestions or lists of useful pen

  Ball capacitive EliteBook 820 G3 Stylus
  
  And
  
  http://Boxwave.myshopify.com/products/mini-capacitive-HP-EliteBook-820-G3-stylus-pen

• EliteBook 820 G3: Where can I find SD compatibility for the 820 Elitebook G3?

  I want to buy a larger SD card and want to make sure that it is compatible with my 820 Elitebook G3, can someone point me to a chart or other resource?

  The G3 820 sd media Reader slot supports SD, SDHC, SDXC.

  The following linke provides the technical specifications for the G3 820.

  http://support.HP.com/in-en/document/c04913012#AbT4

  The information you are looking for is listed under Ports / slots.

  Joel

• EliteBook 820/840 G3: EliteBook 820/840 G3, Windows 7 Enterprise x 64: LAN/WLAN, switch does not

  Unable to get LAN/WLAN switch to work. The setting is enabled. The LAN WLAN connections and remain active at the same time.

  G3 EliteBook 820 and 840 G3

  Windows 7 Enterprise 64-bit

  BIOS is updated (01.07 Rev.A (June 6, 2016))

  All the drivers are up to date as of today (2016-06-23)

  Have reset to the default values for several times.

  Without success.

  Any idea?

  TIA & BR

  If you install the HP Hotkey support 6.2.18.1 Rev.A. then it works

• EliteBook 820 G2: Start from USB - does not take into account my choice and starts hard disk anyway!

  Hi all!

  I just got a new EliteBook 820 G2 and I'm trying to dual boot with Ubuntu. I have it on a USB hard drive that I used to install successfully on a couple other machines (dual-boot a Lenovo T430 and also on a desktop AMD new construction). I cannot go into the options to start with Esc or F9 and the disk appears, but there just ignores it and goes straight to Windows.

  I don't have the partitioned external drive, then perhaps that he is not the right one? Seems funny that he would have worked on two other systems, but perhaps a quirk of the HP BIOS? I don't have a simple USB key with sufficient capacity to hold the installer, but do you think I should try to borrow one for that?

  For any help or suggestions appreciated!

  See you soon,.

  Joe.

  Hi, Joe:

  The only suggestion I can offer would be to go into the BIOS and see if there is a setting to auto USB for USB3 ports.

  If it is set to USB3, you cannot start normally port USB3.

  USB3 can be the default setting.

  The auto adjustment allows the ports work as two USB3 ports when you run windows, and the USB3 drivers are loaded or USB2 ports when not in Windows (for example, when you need to boot from a USB flash drive).