HP EliteBook 840 G3: Why BIOS version 01.07 (sp76235) is pulled? (G3 EliteBook 840)

Similar Questions

• Satellite P500-12F - BIOS version is most recent?

  My BIOS version is V3.10. Dated 30/11/09.

  Can anyone confirm that this is the most recent please?

  Hey,.

  You can check yourself on the official website of Toshiba, if you have the latest version of BIOS or not:
  http://EU.computers.Toshiba-Europe.com

  May I ask why it is so important that you have the newest BIOS?

• Portege M100 - blocked processor at 600 Mhz, have tried all BIOS versions

  Just my BIOS was about 1.20 when I went to site Web from Toshiba to get the drivers to install and to found the update the BIOS so I followed instructions burn it to a disk, the last one I have and I went, but after the update, I noticed that xp says he was clocked at 600 MHz not 1 2 GHz.

  So I used the cpuid to see if it is xp, but it shows as running 598,6 MHz processor and can flow to 600,4 MHz max so I went in the BIOS tried off sleep CPU max CPU and so restarted then I thought it was the xp so I reinstalled but still the same I used Suse Linux always the same.

  I've reflashed the BIOS with 1.50 through the same restarted windows. I get on where and it becomes ridiculous, even, I went and found all BIOS versions on the US site of Toshiba, which dates back to version 1.10 to 1.50, so I tried all the. Nothing!

  I am really puzzled that anyone can sort this is really boring and slow.
  Thank you in advance

  Hello

  Just a question; the motherboard has been replaced by the past?

  I know, after the replacement of the motherboard, the test & diagnosis must be performed in order to update the CPU microcode on the circuit board.
  If the firmware is not updated your CPU would be stuck at 600 Mhz.

  In order to update the firmware, the ASP must be contacted.

  The other reason why the CPU runs only at 600 Mhz is the setting low processing CPU Toshiba power saver.
  Check if the Toshiba power saver is installed on your laptop and set the options at a higher level.

  Check it out

• Re: BIOS version 3.30 Tecra A11/M11: problems with Ubuntu systems?

  I just got the updated BIOS version 3.30 on my Tecra A11/M11 invitation.
  I'm still under Win7 now, but plan to add a dual boot with Ubuntu when the next LTS strikes in April.

  Is anyone having problems with the new BIOS?
  Should I upgrade or leave intact 3.20?

  I don't find any evidence of trouble with 3,20.

  Why upgrade BIOS if everything is OK?

  In addition to as much as I know that Toshiba can't stand not the Linux operating system, and I doubt that the new BIOS would improve any Linux performance so, if you are satisfied with the version 3.20, stay with that

• Satellite A500-1E4 (PSAR9E) - noisy fan stops is never (BIOS version 1.60)

  Hello from the Czech Republic, I have also problem with noisy fan on my new Satellite A500-1E4 (PSAR9E) (i430M, GT330M) on 64-bit Windows 7 over Office Standard - see http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=46719&start=165&tstart=0.

  Today I have updated the bios to 1.60 (from 1.20) and there has been no change. When the laptop powered to the top of the adapter in all modes the fan is running at 60-70% (sometimes at 90% - my office is perhaps quieter :-(). What laptop power battery in normal fashion fan and high performance race to 60-70% (loud sound) and in the economy mode to 80% (very noisy). It's crazy that in economic mode produce more noise than mode high performance. The CPU temperature is cca. 37-43 C, GPU 48-57. Fans of course never stops and all it's standart office. No intensive work or games. I can't imagine in games.

  Can someone help me please, I'm really helpless. Or this fixes only bios 1.30 and next version not?

  Hey Buddy,

  I think that it of really difficult to say why this happens, but in my opinion you should provide more details about your operating system and drivers.
  Are you running the Toshiba factory settings or you have installed another OS?
  Fan sometimes high activity is due to a different display driver. Have you installed the latest display driver form Toshiba (NOT nvidia)?

  Old BIOS versions, you can get an authorized service provider

• The BIOS version number and date on the Pro 6

  Recently I had a Pro 6 and did the upgrade to OS6.5.0 beta RC2.

  I ordered an Intel Core 2 Duo E7600 processor to upgrade the processor in the Pro 6 and did some checking to make sure I'm on the latest version of the BIOS.

  That's what I see in the bios_ver.log:

  / sys/Class/DMI/ID/product_version
  ::::::::::::::
  MB-FLAME6-26/07/2010 V2.0

  / sys/Class/DMI/ID/bios_date
  ::::::::::::::
  26/07/2010

  ::::::::::::::
  / sys/Class/DMI/ID/bios_version
  ::::::::::::::
  080014

  It comes to this thread: https://community.netgear.com/t5/Using-your-ReadyNAS/BIOS-Update-with-OS-6/td-p/935323

  Q: I see this: "I have a Pro 6, 'ProductVersion = 2008-10-03 FLAME6-MB V1.6' ' bios_version = 080014", no idea if this can be improved? Thank you

  A: the answer is Yes, it can be updated.

  The question I have is why 080014 BIOS version is exactly the same, even if the '03/10/2008' and ' 26/07/2010' dates are different?

  Is the date associated with the motherboard or BIOS?

  What I really want to know, is do I really have the latest version of the BIOS installed because my CPU upgrade must be on the latest version of the BIOS.

  Thank you

  The BIOS version is the date of x 86 ReadyNAS legacy. 26/07/2010 is the latest version of your SIN.

• Complete description of the BIOS Version 1.40 - WIN for Satellite L300-1BB

  Somewhere, anyone can find the full description of the bios BIOS Version 1.40 - WIN for the L of Satellite series, which was the site of toshiba on the date 01/14/09. Why should I do this update for my machine?
  Kind regards.

  Hello

  I didn t find details changed in the BIOS update on the page of Toshiba Europe.
  I assume that Toshiba does not provide this information

  However, if your laptop runs without a problem, then I would not update anything you know
  I'm always that notice; never change a running system. And that's the best advice I've ever heard.

  PS: You're talking about L. Satellite... what Satellite L do you have exactly?

• A new BIOS version 3.50 is released for Satellite U200

  Hey guys,.

  I just installed v.3.50 BIOS and it works like a charm. Hope there will be more soon drivers or the drivers at least updated. in particular Flash cards do not work correctly they will still plant.

  With BIOS 3.50 I think I got a little more performance, but maybe it of just an impression, check yourself ;)

  Seems that Toshiba published more a newer driver versions and BIOS versions.
  It s a good sign

• Satellite A210 - 1 4 - BIOS Version of check

  There are several BIOS updates on the website for my laptop Toshiba downlaods. However, I don't remember if I have already installed the. How can I find out the current version of BIOS of my PC? It doesn't matter if I install them again if they are already installed?

  If your laptop works that well, you should not install anything, including BIOS update.

  Start your laptop and press F2 to enter the BIOS settings. You will see actual BIOS version.

• Tecra M5 - BIOS version 3.5 is a real update?

  The 'last' available BIOS is 3.5. Yet, I am currently sub 7.1 downloaded a few months back.
  Is a true 3.5 update?

  Hello

  Where did you get the version 7.1 of Bios for Tecra M5?
  Have you found on the European driver Toshiba page?

  Well, to my knowledge Toshiba provides different BIOS. Some BIOS versions are compatible with XP and others only with Vista. And there is also a BIOS that can handle the XP and Vista together.

  The European driver Toshiba page indicates that the BIOS version 3.5 is OS independent.
  So I presume he manages two operating systems; XP and Vista.

  Unfortunately, I can't say anything about version 7.1 of BIOS because it s I don't not known.
  There is no information about it on the page of the Toshiba driver :(

  Best regards

• Qosmo F60-111 - cannot update BIOS version 2.70

  Nice day!
  A computer laptop qosmio F60-111 (pqf65e-01501mru) with BIOS version 2.10 (05/06/2010)!
  When I try to install the version 2.70 (21/12/10) on windows 7 x 64, flies such error
  Tell me what to do! Update is needed! Help!

  Is the original version of Win7 you have with your laptop preinstalled or do you use the clean version of the OS?

• Pavilion x 2 P3K81EA #ABU: BIOS Version fails to install

  HP Support Assistant offers several times the "Doritos 2.0 system BIOS version.  I select the update and it appears to download and then the installation stage takes a long time before appears a box that says that the installation has failed.

  I would not recommend installing the updates to the bios via Support Assistant. From personal experience, they fail. Go to your product support page software and drivers and check for correct bios upgrade and download from there.

• Satellite L500-1ZP - key to enter the BIOS version 2.10 and the upgrade of RAM

  Hello

  I have two questions:

  1. I recently updated my bios version of laptops to 2.10 and replaced the hard drive with an SSD.
  However, it seems that I can't enter the BIOS more.

  I tried several buttons, but it just won't let me get bios of the laptop more.
  Which button to use to access the BIOS?

  2. I want to upgrade the standard amount of memory from 4 GB to 8 GB.
  Are there recommended RAM sets should I use because of compatibility issues?

  Thanks in advance for any help.

  Kind regards.

  > 1. I recently updated my bios version of laptops to 2.10 and replaced the hard drive with an SSD.
  > However, it seems that I can't enter the BIOS more.

  To access the BIOS press F2 at the beginning of the order started immediately after you have switched on the device, press F2 (press several times on the line)

  > 2. I want to upgrade the standard amount of memory from 4 GB to 8 GB.
  > Are there any sets recommended RAM should I use because of compatibility issues?

  Toshiba Satellite L500-1ZP laptop takes the type of RAM SODIMM SDRAM PC3-8500 DDR3-1066 MHz 204pin. I would recommend the manufacturer Kingston modules.
  Value report great price

• Tecra M7: Various errors after upgrading the BIOS version 3.30

  After that I updated my bios to 3.30 I have the following problem:

  -A edge wireless turns off after a while and can not be activated until I restart.
  -Battery information is wrong. I tested the system, I can use 1 hour after he said that my battery is 0%

  How can I solve this problem? I have to downgrade my bios version?

  Kind regards.

  Hi mate,

  Let's see if my advice would be useful for you:

  1. try to reinstall the driver by downloading the latest version of the driver on the Drivers Toshiba download site. What you could also try is to disable the powermanagment for the wireless network adapter. (Just go into Device Manager, find the wireless card, and that there should be an option with a checkbox to disable)

  2. it's really rare, never heard talk about this issue. One idea would be to change all the parameters powersaver to your machine so that the battery will empty without entering in the day before etc... Just let the machine work until the battery is empty. Then remove it for about 1-2 hours, reattach and start windows. The battery should indicate 0% and then you leave the machine to load the battery. (the machine must be turned on). I hope that the battery must show it s correct percentage after you complete these steps.

  Welcome them

  PS: Please write again if it worked

• Re: After the downgrading from Vista to XP BIOS version the need to upgrade

  Hello

  I have a Satellite P200 (PSPB6) IDE.

  I'm downgrading my whit Vista laptop, windows XP system, when I check everything is updating the drivers for XP I see two version of Bios.

  Satellite P200 (PSPB6) 1, 90 - WIN< my="" bios="" version="">

  Satellite P200 (PSPB6) 5, 00 - WIN< and="" this="" version,="" what="" is="">

  The BIOS must be updated to Pentecost 5, 00 - WIN version when Vista downgrade to windows XP system?

  Thanks for all!

  Hello Phil

  On this forum you can find many threads where people report on the feature key FN does not not after installing Windows XP Home edition. Because of this Toshiba has designed the version of BIOS that supports all this stuff.

  To be honest on this forum, you can find tips very useful and if you have time take a look in the category p Satellite.