HP Elitebook 8440p i7-720QM: try to activate "AMT Quick Setup (Ctrl - P)" I get "Condition of dependency is not satisfied.
I last Using BCU 4.0.13.1)
And I've made visible cant ' t "Prompt(Ctrl-P) of the AMT configuration" message in the BIOS.
And I can't find "Intel the CIRA" anywhere.
But on the second laptop, all right.
Anyone? How to turn it on?
Maybe this Elitebook 8440p didn't vPRO/AMT (intel ME)? How to check?
I use the bat file:
biosconfigutility.exe /npwdfile:"password.bin" biosconfigutility.exe /cspwdfile:"password.bin" /advanced /set: P.txt biosconfigutility.exe /cspwdfile:"password.bin" /nspwdfile:""
with this file: P
English Firmware Verbosity Disable *Enable USB Key Provisioning Support Disable *Enable Firmware Progress Event Support Disable *Enable AMT Setup Prompt(Ctrl-P) Disable *Enable Initiate Intel CIRA Disable *Enable
And I have this newspaper)
C:\Downloads\HP BIOS Configuration Utility>biosconfigutility.exe /npwdfile:"password.bin"C:\Downloads\HP BIOS Configuration Utility>biosconfigutility.exe /cspwdfile:"password.bin" /advanced /set:P.txt C:\Downloads\HP BIOS Configuration Utility>biosconfigutility.exe /cspwdfile:"password.bin" /nspwdfile:""
Finally!
Everything is easy.
Make bootable USB with HPDMI and boot and same time pressinf power button with key ' Buy ' '<" "="">'.
On the screen with the logo - you will see the Red messages.
Press F9 and boot in DOS and run:
cpqamt read cpqamt write reset cpqamt write unlock cpqamt write on rem cpqamt write lock cpqamt reboot
After it enable you in the BIOS everything - TPM and vPRO.
details, see also:
Tags: Notebooks
Similar Questions
-
try to install iTunes on my windows 7, but get windows installer services are not accessible... pls help
Transfer your question here: http://social.answers.microsoft.com/Forums/en-US/w7programs/threads ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
My iPhone was stolen. I try to activate the 'find' on iCloud app but my camera is not listed in the topic "all devices". If I select the "settings" app in iCloud, I see my device listed but. How can I get my unit added to the app locate so that I can active lost mode? Thank you.
You can only locate, lock or wipe your device when it is connected to iCloud and "Find my phone" is enabled, in addition the unit must be turned on and connected to a cellular network or wifi.
Unfortunately, you can not activate iCloud or "Find my phone" remotely.
-
c0xc004c008 erorr
Hello! I have installeut the copy of win7 on my laptop HP6720s but when iam trying to activate the window I get the answer that the key I entered is not valid for this computer, however I have installed the same copy of win7 on my desk and it is activated automatically when I was on the line for the first time
which is wrong with the key?If only, you have purchased a license of Windows 7, you can only legally get an installation of Windows 7.
Microsoft had a special offer for a reduced price Windows 7 Home Premium family package for three computers at some stage. but not for 4.
And memory which was a license upgrade.
Here is the Vista Forums.
It would be preferable for you to post in the Windows 7 Forum installation and explain where you bought your license / s when you post here.
http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install?page=1&tab=all
See you soon.
-
original title: BLUETOOTH PROBLEM Please HELP!
When I try to send a file from my computer to my cell phone an error message appears saying "bluetooth device not found".
Make sure that your bluetooth device is propably connected and turned on. »
In addition, the mobile is unable to send any file to computer th.
I've already matched the mobile with the computer and I use windows 7 please help.
When I try to send a file from my computer to my cell phone an error message appears saying "bluetooth device not found".
Make sure that your bluetooth device is propably connected and turned on. »
In addition, the mobile is unable to send any file to computer th.
I've already matched the mobile with the computer and I use windows 7 please help.
Here is the vista forums
Try the repost in Forum windows 7 the link below
http://answers.Microsoft.com/en-us/Windows/default.aspx#tab=2
Answers by topic
- Office & Customization
- Files, folders, & search
- Game
- Hardware drivers &
- Install, upgrade, and activate
- Internet Explorer
- Music & Sound
- Networking, mail, electronic, & updated online
- Maintenance & performance
- Photos & Video
- Programs
- Security, privacy, and user accounts
- System repair & recovery
- TV and movies on Windows
- Windows Update
Walter, the time zone traveller
-
This occurs when you try to install things like Adobe, Microsoft Office 2010, my printer Installer, etc.
These difficulty his deal with this problem:
http://support.Microsoft.com/kb/2258121
http://support.Microsoft.com/kb/886549
If the problem persists, try to create a new administrator account and that helps to install programs.
-
original title: problems of Windows update/upgrade
I'm currently trying to install Windows 7 on my desktop running Vista.
Whenever I run the Setup it comes up with the following error: Windows could not retrieve information about the disks on this computer.I already put the virtual disk on auto and rebooted several times. I get the same error.Also, I tried to update my computer by using the windows update thinking that would help... Windows update decides to not work either! It comes up with the error: Windows Update cannot currently check the updates, because the service is not running. You may have to restart your computer.gain, I restarted and it still does not work.I am currently running Windows Vista 32 bit on my desk (I thank God for my laptop!).Help!
First, run Windows 7 upgrade advisor:
Windows 7 Upgrade Advisor
http://Windows.Microsoft.com/UpgradeAdvisorNote the results and make sure to follow the steps.
Try to install Windows 7 using the USB
Install Windows 7 with a USB memory key
http://www.winsupersite.com/article/Windows-7/install-Windows-7-with-a-USB-memory-key -
Try to send a photo by e-mail on Picasa, the message comes back that they don't recognize or accept
Internet Explorer - that is what I have. Makes no sense.
Then ask Picasa Help.
-
EliteBook 8440p: 8.1 pro not Windows activation
Hello!
New Member to HP. A joined to get my problem sloved. I bought a second hand HP EliteBook 8440p laptop that has windows pro 8.1. The problem I face is that windows will not activate. The product key gives this error "error code: 0x8007232B.
Hello @JK6 ,
To get your question more exposure I suggest you post in the trade forums since it is a commercial product. You can do to commercial Forums.
Even if it is a Commercial product, here is a link to product activation. Your Windows 8 has been the already active and you do not need to activate again. Make sure that your edits were complete which could cause this problem. Anti-virus protection stops sometimes activation. I would temporarily disable it. Then try again.Thank you.
-
EliteBook 8440p: problems of Expansion RAM HP 8440p
I recently decided to upgrade the memory on my EliteBook 8440p. After reading the form of RAM required, I bought one of these: http://www.ebuyer.com/737970-kingston-4gb-1333mhz-204-pin-cl9-ddr3-sodimm-non-ecc-unbuffered-1-5v-me...
Once the new RAM is installed in the expansion slot, Windows will not start and crashes just on screen "starting Windows." Then I tried a test of memory using the system BIOS diagnostic tool, but the laptop either hangs around 35% (I left it there for about two hours), restarts, or stops altogether. I thought that I would give to the system try, repair tool but which caused also just the laptop restart. Curiously, when I check the "System information" tab the system diagnostics, the two RAM sticks are detected with current and accurate information.
I contacted eBuyer, they sent a replacement out there, but I'm having the same problem again. So, I thought I would try to install new RAM in the internal slot instead (under the keyboard), but now I have a BSOD during the 'Starting Windows' screen, give me code error, "IRQL_NOT_LESS_OR_EQUAL"
I read on some forums tech upward. One of them suggested runs what is called 'Memtest' at startup via the CD, I tried, but the laptop restarts only during the first passage of the test of memory (and of course some loops over and over again until I remove the CD).
I'm starting to lose hope! Any help/advice/suggestions would be greatly appreciated.
Hello:
See this related post. You must use a very specific memory in this model, or it won't work.
-
HP elitebook 8440p: Ricoh Bay8 controller
Can someone tell me what multifunctional Ricoh Bay8 and it's a driver on my hp elitebook 8440p?
Hello
It is for the smart card reader. Please try (page 3):
Kind regards.
-
HP Elitebook 8440p - Mute button works but blocked on orange.
Recently bought a refurb HP Elitebook 8440p and noticed that although the mute button works the key just above the keyboard is always orange. Is it possible for me to correct it so that it shows orange only when on mute and green when not cut?
Hello
Try the following.
Download IDT Audio Installer found on the link below and save it in your downloads folder.
One time finished, open windows control panel, open Device Manager and open sound, video and game controllers. Right click on the IDT device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.
When you are finished, download and reinstall the driver to Chipset found on the following link.
When thie Chipset resettlement has completed, reboot the laptop and let Windows load completely-, it will automatically load an audio driver, but let just this complete. Then open your download folder, right-click on the IDT Installer and select "Run as Administrator" to launch the installation. Once this done, restart the laptop again before checking the function of the button mute conduit.
Kind regards
DP - K
-
EliteBook 8440p: elitebook 8440p upgrade of windows 10 mess with boot
Hello!
I bought a refurbished elitebook 8440p with pre-installed windows 7, 8 GB of RAM, 2.40 GHz processor. I continued to refuse the upgrade of windows 10 when he constantly jumped upward and then one day I turned on the computer and it updated in any cases without permission.
Since the upgrade, if I shut down my computer, or try to put in standby or Hibernate mode, when I go to wake up or put on, I always get a white screen. In general, I have to turn power several times on and off until any startup screen. Then half of the time, when I get a splash screen, my cursor is stuck at the top of the page, moving only left or right whenever I try to move it. So I have to turn and turn until a new screen is displayed.
I studied how to remove 10 windows and reinstall windows 7. I passed the period of 10 days or 30 days. Media creation tool asks for the product key which I type in the sticker on the bottom of the laptop, but do not pass the verification process saying to contact the manufacturer for help. Apparently there may be specific drivers or something you took when it improved and the media tool does not allow me to create anything for me to do a clean reinstall of windows 7.
I tried to find an option after pressing esc at the f11 reset start screen. There was no option to do so. The best I could do was to 'reset' of the computer, but he took back to the original Windows that it is firstly set at level 10 to. All my files are deleted from the computer. I just want to return to Windows 7, but could not find an effective way to do it.
Thanks for any help you can offer.
Hello:
If you live in the USA/Canada, call this number of HP and order a set of recovery disc for your laptop.
1-800-334-5144
Have the serial number handy to give to the customer service rep.
A set is expected to cost about $10 shipped by first class mail.
-
EliteBook 8440p: Base system device problems
I'm having a problem with the Base system device PCI bus 69, device 6, function 2 (code 28) on my Elitebook 8440p.
I was working on my laptop and my Wifi says "no connection available. I made the necessary troubleshooting and landed on it.
I've updated the paks, individually made chip so that other device drivers are updated and the system indicates that this driver is not available when I try to update. Any suggestions?
Hello:
You have need of this driver for the... base system device is for the reader who is not related to the Wireless does not.
http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=4095873&swItemId=ob_79317_2&swEnvOid=4059
If the Wireless does not work and you need a driver for it, there will be a labeled device network controller where you see the listed base system device.
-
EliteBook 8440p: EliteBook 8440p has no RAM 8 GB upgrade
I have EliteBook 8440p with i7 M620, 4 GB of RAM and WIndows 7 64 bit installed.
I wanted to update my RAM 8 GB as suggested here and bought 2 x 4 GB RAM of:
KINGSTON ValueRAM 4 GB DDR3-1333 (PC3-10600) SDRAM-DDR3 CL9-9-9 204pin 1.5 Volt
I replaced the 2 GB card at the back of the laptop with the Kingston 4 GB and when I started windows:
- The BIOS showed 6 GB of RAM
- But blocked when Windows starts, your stay at the black screen with the "starting Windows" without the points colored forming in a window.
I tried to restart, but no change.
No idea which can try to solve this problem, or switch to 8 GB?
Thank you
Nikolai
Hello:
Please see this post for a laptop with the same chipset related...
Maybe you are looking for
-
Get the gray triangle on webmail.maine.rr.comwarning; other sites I use are safe. Is this a problem of Mozilla or TWC?
-
How can I watch a movie DVD on my Satellite A200-1HE with Windows XP Home edition?
Hello I bought a laptop Satellite A200-1HE and have uninstalled Windows Vista. Now I have installed my own purchased copy of Windows XP and downloaded the drivers from the Toshiba web site. But now I want to use the computer to watch DVD or write CD
-
Re: Satellite A350-216 - how to disable the touchpad?
Hello! I have a problem with my touch pad. I have the latest drivers from him (Alps Point Device 7.2.302.101). Press "FN" with "F9" should turn off the touch pad, but it is not doing. I checked - the "FN" key as the key "F9" work. But when I press th
-
Hello world I understand that mainly El Capitan is reported as for most of Yosemite, with performance improvements. However, I just bought a new MacBook Air, OS X Yosemite (10.10.5) with 256 GB & 4 GB RAM and I don't know if would be a good idea to u
-
I put two 2 GB ram sticks in, now, I have 4 GB of ram on my PC had two RAM sticks of 1 GB, now I got 4 GB of ram my physical memory is going crazy sometimes, he climbs up to 2 GB of physical memory or more and it mess up, my PC runs slowly now someon