HP Elitebook 8440p: my laptop HP Elitebook 8440p stops down and getting really hot
My laptop Hp Elitebook 8440p stops and gets really hot!
In fact, when my father works on that is not closed down
"WHEN I PLAY GTA SA IT stops"
PLS PLS help me I live in Pakistan
Hello
You already know why. GTA SA requires more CPU and video power specially and it will pump heat upward. To protect against damage, it will turn off.
Solution: Stop the game GTA SA on this machine, buy a good games to play games.
Kind regards.
Tags: Notebooks
Similar Questions
-
Laptop stops randomly and gets stuck on the saving settings
Basically, we have some laptops 10 + this will stop randomly and get stuck on the "saving settings screens.
Here are the different models of toshiba R500-R600 M10 M9 M5
We changed versions of bios etc, reimagee them, even used an image of windows xp disc rather than soe.
Hardware tests OK and customers do not something in particular, some when others when you connect using applications office, back in after a while. Some use docking stations, others not.
All ideas
Hello
Just a question: are you an authorized service provider?
I ask this question because it looks like you are an ASP because you have so many laptops and you have tested different things.It's really hard to say what the reason is for this but I think that in this case, you should contact Toshiba directly. Maybe it s a known issue and it can be fixed in a few minutes.
So ask for it and wait for a response. -
Laptop gets really hot after half an hour and stops
hope you can help me, when I have my laptop for half an hour, its starting to get really hot then stops, you don't what I please.
The main fan in the unit has stopped working.
You have two choices...
- Have it repaired by a competent technician
- Buy a cooler really good temporary basis...
A really good cooler base... The X of Coolermaster series SLIM model. He works for a Toshiba laptop whjich has the same problem you have...
-
Just, I redid my laptop using my system recovery disks. I went to windows update and get this msg when I click on Express.com: the site has encountered a problem and cannot display the page you are trying to view.
Original title: I redid all my laptop. I went to windows update and get a message that says: there was a problem witht the site and I wanted that the pag can not open the page I have requessted at this time.
You must download and install Windows XP Service Pack 2 (if not already installed) followed in Windows XP Service Pack 3. You will find two of them at http://www.microsoft.com/downloads - download the "Network Installation Package" for the two and ignore the part about them being only for the professionals - the parcel I recommend you download will install with or without network connection.
-
My Vaio laptop gets really hot without good reason!
Hello, my computer has been heating very quickly for no good reason, if I turn on my computer and it sitting idly... for 10-15 minutes my computer would be really hot. He went to the 70-80. even into the 1990s
I put him on the wood or things that are not soft and hard, but despite this, it is still hot. All this happened when my computer has been returned by the repair shop Vaio due to a problem that had happened, however, I think that the purpose of this is because of the fan... She either is not working properly or is too dusty, or even perhaps the amount of heat... etc... Please I need your help, I can not clean! I'll need your help! I trust in you, my laptop Vaio costed me $ 1,000!
-
I had used the Device Manager, try to reinstall the drivers fix for windows etc nothing works
Hello
· Did you make any changes before the show?
I suggest that you run the fixit provided in the link below and check if it helps:
http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us
-
Re: Laptop battery drains after stopping down
Hello
I followed the instructions to uninstall "Microsoft compatible ACPI controller embarked", turn the computer off, pulled the battery etc... However, when I turned it on the "embedded controller compatible ACPI Microsoft" was more listed in the drivers... is that a problem?
Thank you
Hello @Eng_Gladiator,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.
I understand that "controller on-board compatible ACPI Microsoft" is no longer listed in Device Manager after you have uninstalled it on your computer, and I'd be happy to help you in this case!
To invite your system to recognize the embedded controller, I advise you to follow the steps below:
1. click on the Windows key on your keyboard
2. Type "compmgmt.msc".
3. Select compmgmt.msc
4. Select the Device Manager in the left column
5. right click on the name of your computer and select Scan for hardware changes
Reference: https://answers.yahoo.com/question/index?qid=20131227190644AAvYPrI
If you are still not able to find the controller in Device Manager after you perform the foregoing analysis, I suggest also return your system back to a previous restore point before you uninstalled the driver. This can be done by following this document on using Microsoft System Restore (Windows 8).
If the on-board controller not appear, I have recommended to perform a backup and restore of your operating system. This can be done by following this resource on the backup of files (Windows 8), and more to perform a recovery of the HP (Windows 8) system. This should help get your system back to factory settings.
If the problem persists, please call our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number.
http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html
I hope this helps!
Concerning
-
Problems to connect a printer to my lap top using a wi - fi connection and get a message saying "print spooler not working do not ', even though troubleshooting it says it is fixed, any ideas please?
Original title: install a printer
I see an error message about "spooler" problems
A print spooler is software that temporarily stores the disk printing hard or in memory until the printer is ready to print.
If you were expecting an abnormally long time to print a document, or if you see an error message about the print spooler, you may have to restart the spooler to print on your computer.
To restart the spooler, the simplest method is to save your work and restart the computer. Alternatively, you can try the following steps:
To restart the print spooler service
You must be logged on as administrator to perform these steps.
Click Start, type: services , then press on enter on your keyboard
Double-click Services. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
Right click on the print spooler service, and then click Properties.
On the general tab, next to startup type, make sure that automatic is selected.
If the service is not already running, under Service status, click Start and then click OK. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
-
HP Pavilion 15 laptop: My laptop won't be stopped correctly
Hello
I installed windows 10 last week, and after that my laptop computer does not turn off when I click on stop down and the screen goes black and I have to press the power button to turn off.
I tried a few ways that I found on youtube, but none of them worked so please tell me the effective way.
What should I do?
Thank you
- Download version 9 or 10 of the Intel Management Engine Interface (MEI) driver.
- Navigate to HP Software and Driver Downloads site (http://www8.hp.com/us/en/drivers.html) to find the last pilot approved for your model. Filtrer filter by version, select Microsoft Windows 8.1 on the menu drop-down. Find the download in the category 'Driver-Chipset' If a pilot of MEI with a version from 9 or 10 number is listed, download. [9.5.24.1790 version 1.5 M (http://ftp.hp.com/pub/softpaq/sp66001-66500/sp66228.exe) works for most models.]
- If a pilot of MEI with a version from 9 or 10 number is NOT listed, download the driver appropriate directly from Intel (https://downloadcenter.intel.com/search?keyword=intel+management+engine). [9.5.24.1790 version 1.5 M (https://downloadcenter.intel.com/download/23091/Intel-ME-9-Management-Engine-Driver-for-Intel-NUC) works for most models.]
- Download the Package of troubleshooting Windows 10 "show or hide updates" (http://download.microsoft.com/download/F/2/2/F22D5FDB-59CD-4275-8C95-1BE17BF70B21/wushowhide.diagcab).
- Change the Windows Update Services automatic (delayed start) parameter to the manual.
- In Control Panel, select administrative tools, and open Services.
- Go to Windows Update and double-click it to view its properties.
- Click on stop to stop the service to run.
- Change the Startup Type to manual, and then click OK.
- Install version 9 or 10 of the Intel Management Engine Interface (MEI) driver. If you receive a warning dialog box about the replacement of a newer version of the software, accept it.
- NOTE: You have NO need to uninstall version 11 before installing version 9 or 10. The presence of a version of the driver is required to 'upgrade' (or demote in this case).
- Run the Windows 10 Troubleshooting Package 'Show or hide updates' and hide the updates of the Intel Management Engine Interface (MEI) driver. (This will block your system automatically reinstall or display of updates for version 11 of the pilot).
- Change back the setting of Windows Update Services to manual automatic (delayed start).
- Restart your computer.
- Rejoice! You can finally sleep and stop again.
-DanG
-
sk781uc: HP EliteBook Notebook PC - Maintenance and Service of Guide 2540p
I'm looking for a copy of the HP EliteBook Notebook PC - Maintenance and Service of Guide 2540p , now it's this url, two months ago, he went to: http://h20628.www2.hp.com/km-ext/kmcsdirect/emr_na-c02664684-1.pdf
Hi @Cyber_Master_G,
Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!
I stumbled upon your post on the laptop and wanted to help you! Try this link.
You can say thanks for trying to help, by clicking on the Thumbs Up below! .
Thank you.
-
Folio 9470 m: Please HELP: no laptop found bootable image stops
Hello world
I have a folio elitebook - 9470 m HP and today I formatted diskpartitions all with command prompt (ntfs) because I wanted to clean the SSD to re install Windows 10. After a reboot, I get the error message: "can't find any bootable image, notebook will be stop.
I tried to select the USB drive as the start number one option because I have a picture of 10 Windows bootable on my USB key. I can't the computer to boot from the USB - stick to install Windows. It makes me really mad because I never had problems like this, and I installed Windows several times on the same notebook. (But never formatait all the diskpartitions)
So if anyone could help me it would be much appreciated!
What you can do is to go to the Microsoft website and download the Windows ISO file
You can either using their all-in-one utility to create a USB flash drive or choose to save the ISO file and then run Rufus to create the USB key.
https://www.Microsoft.com/en-us/Windows/Windows-10-upgrade
If a working method so something wrong with your original image.
-
Pavilion 15-n005tu: laptop does not completely close down
Hi, using the 15-n005tu Pavilion. The laptop can not completely stop, after the screen turns black, power light comes on over the wifi light. The fan on too. I tried to do an update of the bios and chipset, but this has not solved the problem. Kindly help...
Mathew
Hello
Try disabling the hybrid Windows 8 start - you can do the following.
Right-click in the battery icon in the taskbar and select Power Options - in the next window, click on "Choose what the power button" in the left pane.
In the next window, click on "Change settings that are currently unavailable" (close), then Remove the check mark from the box against 'Turn on a quick start (recommended) '. Click on the button Save the settings, and then close open windows and stop the laptop by right clicking on the icon from the Start Menu, select prompt (Admin) and click 'Yes' to the uac prompt.
Type (or copy and paste) the following command (including spaces) and click Enter.
Shutdown /s /t 0
Start the laptop and let Windows take over completely for a few minutes before checking if it is now shut down properly in the Start Menu.
If this has fixed the problem, it may be useful by turning the quick start back on - sometimes simply remove and re-create the file will solve the problem.
Kind regards
DP - K
-
Laptop HP Pavilion DV7 not really hot...
Product information:
Name: HP Pavilion DV7-6193
OS: Windows 8
Changes to the system: Updated, recently reinstalled Windows 8 video card drivers
Hello
Lately, my laptop has been get very hot and the fan is really loud, even if I do things as little as surfing the internet, for the moment, I closed all the non-essential programs in the Task Manager I do not use, and turns at 70 degrees (Celsius) sometimes still warmer upwards to 80 degrees (Celsius) while watching videos on Netflix. When used for games, it goes up to 90 degrees. This has happened for a while now, before even to update my video card driver, so I eliminated that as a possible reason. I tried to put it on the mode or balanced in energy saving mode, but not much changes if anything. I disabled switchable graphics problems with no switch cards AMD I have inside (uses Intel on switchable) so I took off switchable graphics for game reasons. I have a cooler laptop that I use, but just worried, why it is not so hot for not heavy use any. Any help will be much appreciated. Thank you.
As your laptop HP Pavilion dv7-6193 Entertainment is two to three years old, you want to maybe blow out the vents with a can of air compressed. When the dirt is trapped in the vents, it reduces the efficiency of the cooling system. This can cause the fan to the race as it tries to cool the CPU. Finally the system is overheated and shut down to protect themselves.
Please send BRAVO
-
Satellite A300D - fan turns very hard and the laptop gets very hot
I was wondering if someone could point me in the right direction as what to do with the overheating problem that I currently have with my A300D. I had the laptop for less than a year, it is still under warranty but I don't know where to go or what to do to fix it.
The problem: about two months ago, I noticed the fan turns very hard and also the laptop gets very hot. Now it runs so hot the laptop shuts down completely. The heat being driven out of the laptop is so hot! burn your my infact.
Anyone has any advice they could offer me.
Thank you
JamesHi James
You wrote that you have the laptop less than a year, so my question is this is already cleaned it?
The laptop needs to be cleaned every 3-4 months and I do this every 3 months. Whenever I do I m wondering how much dust out and after this procedure the portable is a lot cooler.Here's an interesting article from Toshiba on this subject:
http://APS2.toshiba-tro.de/KB0/HTD7A01ZZ000AR01.htmCompressed air spray is really useful and you should check it out yourself! ;)
-
I'm repplace the rear/top hood for a 15 HP laptop, model number 15 t-r160. It is blue. The customer has dropped and damaged about everything on the left rear corner (hinge, lcd screen, corner covers...) and the upper rear cover. The part # on the broken lid is 760966-001. I tried to order the part from 2 different places on eBay and both times they sent me the worng a 775084-001. These 2 numbers appear as the same party on several lists, but they are different. 775084 001 is not for the LCD screw holes. 760966-001. I can't find a place that recognizes / acknowledges the difference short of opening the box and observing. HP support has been absolutely NO HELP. Anyone know where I can order part # 760966-001 and get 760966-001? Thanks in advance for the help!
Just an update. A seller from eBay, turbofly626, actually took the time to seek the cover of exact part 760966-001, and they had 1 available. They are sending me. All other replacement covers for this laptop 15 HP are the alternative part # 775084-001. And yet once that one will not work due to not having the screw for the LCD screen holes. HP and other vendors of parts must get this right. I don't know if this has anything to do with it, but the model # of this Notebook of 15 special HP is HPt-r160. That's all! There is no NC, NA or SA at the end of the model number. What I found for the model r160 referred to one of the models in 3 sub (NC, NA or SA). Weird. Very frustrating!
BIG thank you to those who have responded and have tried to help!
Maybe you are looking for
-
I can't load Firefox. I get the message unable to load XPCOM. How can I get Firefox to load?
-
Replacing text OS works is not in Outlook 15.22
I've upgraded to the latest Outlook for Mac, a week or two it y a. I noticed that the keyboard replacement text I put in place ' System Preferences > keyboard > text ' stopped working completely in Outlook. Although they operate elsewhere, safari, no
-
I'm having the same problem as others, i.e. a previous update failed during installation (power failure) and now Vista SP2 install it, complain about 80070490. Running sfc/scannow says I have 6 CBS MUM missing kb905866. Recommendation found Googling
-
Cannot open my files money 2005 after replacing the hard drive
Hi, I had to replace the hard drive in my computer and now I am unable to open my money (Version 2005) files. I get an error message indicating "Money cannot locate C:\~~~ or cannot open it, possibly because it is a read-only file or you are not allo
-
Original title: HELP my OpenHCD USB Host Controller Standard will not work or update. Can someone tell me what to do instead of buying a new computer? Devices USB MU simply stopped working. I did the driver uninstalls and don't reinstall no chance