HP ELitebook 8760w: HP ELitebook 8760w HotKey Support in win 10 is not available

I can't find a softpaq for HP ELitebook 8760w HotKey Support in Windows 10.

Is it a?

Hi Paul,.

Thanks for the quick response.

The proposed version did not work.

I found a version for Windows 7 x 64 (sp56876.exe) here and used.

It took a former .NET Framework (3.5) in order to install so I had to activate only in the front Windows settings.

After reboot, all access keys work.

Tags: Notebooks

Similar Questions

  • Satellite P205-6347 - Hotkey Utility for Win XP does not work

    I try to install XP on my laptop Toshiba Satellite P205-6347 and have everything works except for the Toshiba Hotkey Utility.

    Does anyone know of a driver that works?
    I would appreciate that this has not worked for some time.

    Thanks in advance.

    Paul

    Hello

    The question is; have you used the right and correct Hotkey Utility?

    The laptop seems to be a Toshiba model we. The drivers, tools and all other things found on the Toshiba page we. Form, you should download the drivers available.

    Did you do that?

  • Support for Think-brand products not available?

    Hello!

    I'm servicing a 2374-E18 T42 notebook and I need to download the drivers for it. Imagine my surprise when I visited support pages of Lenovo for the Think brand products...

    You guys are doing something with the support pages?

    See you soon,.

    Bostjan

    Hi BoskoBuha and welcome to the Lenovo user community!

    Maybe there is a little problem. The support page is now available:

    http://www-307.IBM.com/PC/support/site.WSS/quickPath.do?quickPathEntry=2374E18

    I hope this helps!

  • EliteBook 6930p: battery Elitebook 6930 2 not available

    Hello

    I recently had a 6930p Elitebook which was once used as a computer professional, and I photographed it with a copy of Windows 7, I confess, and then upgraded to Windows 10. I noticed that when I click on the battery down to the left, it is said there are two batteries. Battery 1 seems to work fine, but 2 battery says it is not available for use. Is there something I can do to make the second battery work? I would like to improve the battery 1 battery lasts approximately 2 hours. Thank you.

    @etaaron

    That would be a trip or the 2nd battery battery.

    REO

  • HP 8760w upgraded with SSD SATA 6gbs does not

    I have a HP 8760w and I put a Samsung 840 Pro 256 GB SSD inside.

    In BIOS SATA is set to 6 Gb / s, but when I enter the program Samsung magician (win 7) its tells me that 6 GB / s is not available.

    What can I do to get 6 Gb / s to work?

    Running win7 and Ubuntu 14.04

    It's a bug! When you select 6 Gb/s its done select 3 Gb/s. When I chose 3 Gb/s its now running at 6 Gbps in win 7 and Ubuntu...

  • DVD Studio Pro DVD "supported disc not available".

    Hello Forum,

    I am trying to burn a DVD again an already existing DVD Studio, already registered and created the file pro with all the menus related to the video file.  Another company created the DVD Studio pro menu and queue in front of me, I replace the newly edited video and try to burn a DVD with the new video and audio files.

    I compressed the file Compressor 3.5 using the button create DVD in the compressor, I created a file DVD SD Mpeg2, audio and video.  Imported in the pro Studio already created DVD file, I have the burned DVD, but appears to "Support disc not available" when I try to play the DVD on my Imac drive (also not tried in a standard DVD player no chance)... I tried this twice now, the first time that I realized I had created a HD DVD, I also created a separate folder on the external drive as well.  When I click on the DVD that was burned it shows as: HVDVD_TS and no audio file.

    Can you please help me, I watched the video of youtube after another, but I'm not create from scratch, I know not at all unfortunately the program, but I use a DVD already created Studio, file with many menus already linked to the video and don't want to not recreate from scratch... I think this should not be so difficult, and definitely miss me something.

    Thank you very much for your help!

    -Tony

    Open the preferences of DVD Studio Pro and set it up to create the SD DVD.

    -DH

  • Commercial DVDs do not play on MacBook Pro.  "Not allowed" and "Supported disc not available" is displayed.  DVD plays normally when inserted in a different drive.

    MacBook Pro (15 inch, early 2011) / 2 GHz Intel Core i7 / 8 GB 1333 MHz DDR3 / OS X El Capitan Version 10.11.6

    DVD Player Version 5500.66 / Build 5,560 (2)

    When commercial DVD (NTSC) inserted in the MacBook Pro DVD Player error messages "forbidden" and "Supported disc not available" are displayed when I tried to play the DVD.  When the DVD was removed from the MacBook Pro and inserted into a different DVD player, it works normally, then the DVD was apparently not the problem.

    Your help is appreciated...

    Delete ' ~ / Library/Preferences/com.apple.DVDPlayer.plist ' and a DVD player or reopen could solve the problem.

  • LabVIEW support 3 error code: could not load front panel

    Hello

    my colleague has a problem after the update to LV2011 (from 2010) and now get: LabVIEW support error code 3: could not load front panel

    Even on my system (also tried a massive compilation)

    He's afraid of losing some of his works.

    Zipped file is attached

    Hi Henrik,

    It should work now.

    Instructions to fix a corrupted in 2011 VI or more:

    1. close LabVIEW

    2. Add connPaneRecoveryMode = true to the file LabVIEW.ini (-the file LabVIEW.ini is located in the folder of National Instruments > LabVIEW 2011 > LabVIEW.ini)

    3. open the VI corrupt.

    4. press CTRL + A on the block diagram and the copy / paste to a new VI.

    5. save the new VI.

    6. close LabVIEW and remove the token of the ini (VERY IMPORTANT)

    7 restart LabVIEW and load the new VI and check that it is correct. Save

    Cheers, RMathews

  • HP Pavilion dv6-1242tx: updated driver required but not available to HP support.

    I noticed that my keyboard returns incorrect symbols as I type. A case occurs when I hit shift-2 poster 'symbol' instead of @. My PC has a QWERTY keyboard, and I am currently using regional (UK) English, the input parameters and the format.

    Also, when I go into my control panel / devices and material, I see the error message that is associated with my PC:

    Status: Driver is not available

    Status: Driver error.

    I have checked with the help of HP but have found that the driver for my model number and the operating system is not available.

    Can then someone suggest a source for a driver or a workaround?

    I noticed the warnings in support of HP related software vendors claiming to be affiliated with HP, so I thought I would ask this forum before you search the web.

    Thank you for your consideration of my problem in advance.

    Hello

    If the @ symbol is SHIFT + 2 key, then you have a style WE keyboard (the ' is on shift + 2 on a UK layout).  For this to work properly, you must select the United States keyboard layout - you can change your keyboard layout, as described at the link below.

    Change of keyboard - Windows 8

    Kind regards

    DP - K

  • When I click on the link while using help and Support in Windows XP, I get an error message saying "page is not available" also a filled red circle crossed out

    Original title: help and Support under XP

    The installation option "search" in Help and Support is OK, but if I try to open any underlined green/blue link I get the error message "page is not available" also a circle full red bar. This always happens in any response. Obviously something is damaged - but as you please and how to fix it.  John

    Hello

    ·         You have installed Windows XP Service Pack 3 on the computer?

    ·         You are able to browse normally in internet explore?

    This occurs if the Microsoft HTML Help control is blocked (probably by a Microsoft Update) by defining a "Kill bit" in the registry. To resolve the problem, upgrade to Service Pack 3 , which publishes an updated version of the hhctrl.ocx control.

    If this doesn't help, run the following command from start, run dialog box:

    Regsvr32.exe hhctrl.ocx

    Press ENTER

  • HP Scanjet 5200C not supported in Win 7-64.

    I tried the HP site, I tried the patch to update the firmware of the scanner. I got the USB drivers to install, but Win 7 is not correctly identify the scanner when I connect it to the USB port.

    I tried the HP site, I tried the patch to update the firmware of the scanner. I got the USB drivers to install, but Win 7 is not correctly identify the scanner when I connect it to the USB port.

    You are right.  HP Scanjet 5200C is not supported in Windows 7.

    1. why you send a question of Windows 7 in a Windows XP forum?

    2. this patch updated the firmware of the scanner? One described by HP in this way (my emphasis):

    ScanJet 6300, 6200 and c 5200 series USB connectivity/Firmware Update

    2002-05-28, version 1.0, 105,11 k

    This update resolves an issue where the scanner is not detected when connected via USB forWindows 2000 or Windows XP systems , but works fine on another interface, SCSI or parallel.

    This update runs only on Windows 2000 and Windows XP systems .

    3. what USB drivers?

    4. have you seen HP statement which

    If your operating system is not listed, HP doesn't have software or driver downloads available for this product in that operating system.

    There is no Win 7 for the Scanjet 5200C driver.  In the Windows 7 Compatibility Center, it looks like a HP scanner which had a Vista driver works in Windows 7.  I don't know if Win 7 just use Vista driver or the Vista driver was simple update to Windows 7.  Unfortunately, the Scanjet 5200c only had drivers for Win 95, 98, 2000, NT 4.0 and XP.

  • Integrate the end of Support for Win 7 and 8

    While beating around the Internet for some answers, I saw three sites that say your support for current versions of Windows ended January 13 [Download Day]. I missed something?

    Hello

    Standard support is now complete for Windows 7. However, Microsoft will continue to publish updates of security for her until January 14, 2020. This means that there will be no settings/news.

    Integrate support for Windows 8 has not yet completed.

    Thank you

    Legaede

  • Any idea when a raw codec pack which supports Canon 6 d will be available?

    The last Microsoft Camera Codec Pack (16.4.1734.1104), published on 12/11/2012 does not support the 6 d, can not watch raw. Cr2 files in Windows Explorer.  Any idea when an update will be published?

    As you have noticed originally that the Microsoft Camera Codec Pack does not support the Canon 6 d.  If you look at how they add cameras, chances are good that in the next six months, they'll add taken in charge as they add more new cameras lately.

    Canon did release a codec in mid December 2012 which supports viewing RAW images in Windows Explorer or the photo gallery.  Look for the Canon RAW Codec 1.11.0 version

    That being said, this is a 32-bit version.  If you have a 64-bit system, it won't help with Windows Explorer.  Canon has never released a 64-bit version of their codec.

  • We get an error "the driver of the scanner supported by this software is not installed." Install it and then try again"after the installation of MP Navigator

    * Original title: drivers Canon MP160 printer (scanner-MP navigator) on issues of Win8

    Hello

    I bought a win8 system. I tried to install the Canon MP160 driver on the system.

    Had trouble at the start, but was able to install in compatibility mode for win 7, which solved the problem of the printer.

    Now I have problems with the installation of MP Navigator to scan.

    I am able to install MP Navigator but receive error message "scanner driver supported by this software is not installed.» Install it and then try again."

    Help, please.

    Pavan Sandur

    Hi Pavan,

    Thank you for the information.

    You can uninstall the drivers from Device Manager and try to install the latest versions to check the issue.

    If the problem persists, try to install the software of the browser in compatibility mode and see if that fixes the problem.

    http://Windows.Microsoft.com/en-in/Windows-8/older-programs-compatible-version-Windows

    You can also get in touch with the Canon Support for assistance on their products and compatibility.

    http://www.Canon.ca/inetCA/contactus?m=loadcontactus&lang=en&commId=3&typeid=1&msegid=2

    It will be useful.

  • Driver Bluetooth not available on the Dell Support suite

    Hello to everyone in the community,

    I have this Dell Inspiron 15R N5110 for the last year and I am generally satisfied with his performance. I got Windows 7 Ultimate edition provided by my dealer and it worked well all round. I joined Dell Community a few months ago and downloaded and installed DELL QUICKSET from Dell Support site as an update. Before installing Quickset suite Bluetooth to my laptop would work fine, but after installing quick adjustment, it has stopped working. Without doubt, I disturbed the sequence

    Recently, I installed a new copy of Windows 7 and follow the order appropriate for the installation of the driver. I couldn't find a driver Bluetooth of independent outside the BHS + WLAN driver on the dell support Web page. The laptop recognize the Bluetooth and Wireless LAN adapter but cannot start the two. I found the wireless LAN driver, but the driver now Bluetooth is not available on the official Dell support site. I tried online diagnostics and research on the Dell Support programs but could not find.

    Can someone please give me the link on Bluetooth driver in the Dell Support Web site?

    Concerning

    Junaid Shah

    Pakistan

    Hi Junaid Shah,

    Inspiron 15R N5110 goes hand in hand with a combo (Wi - Fi and Bluetooth) card and the drivers are not provided separately. You will need to download the driver of combo on the Dell site.

    The drivers are downloadable at the link below.

    http://Dell.to/QtFK85

Maybe you are looking for