HP EliteDesk 2 800 LTS: BIOS refuses to activate Legacy Boot

Similar Questions

• 800 LTS G2 Elitedesk: How to enable legacy boot on Elitedesk 800 G2

  Hi all

  We recently received a sample Elitedesk 800 G2 unit so that we can tailor our solution for OS deployment him before that people in our society early buying.

  We use the PXE-boot legacy for deployments so I wanted to set up the machine to make Legacy Boot and set the inherited from PXE first boot order.

  Since there is no documentation or the help that I could find, it is a process of trial and error.

  I finally managed to get boot inherited the machine by setting secure boot "Enable and disable secure boot" "Advanced" slot and allows the setting "secure boot claire keys»

  After a reboot, I was able to disable UEFI and configure the boot order inherited as you wish. Everything worked well.

  To validate the procedure I returned the machine back to factory defaults and tried to follow the same steps, but now the parameter 'start secured clear keys' are grayed out and I can't set 'enable and disable secure boot '.

  Anyone know how I can get back to boot legacy now? Any help would be greatly appreciated.

  I thought about it myself, it's for the benefit of third parties:

  to switch from secure boot UEFI Legacy Boot on Elitedesk 800 G2 (and others with the same firmware):

  F10-configuration of the BIOS

  'Advanced' - 'secure boot configuration', set 'key to secure clear boot '.

  Save & Reboot

  machine you ask for a code, enter it and restart.

  F10-configuration of the BIOS

  "Advanced" - "" secure boot configuration ".

  Select 'enable legacy support '.

  Save & Reboot

  F10-configuration of the BIOS

  Startup options: Disable 'UEFI boot order' and activate/configure "boot order of inheritance.

  Save & Reboot

  Yes, 4 reboots are required unless there is a quicker way that I don't know.

• EliteDesk 800 G2: SSD will allow only boot UEFI and not appear as a legacy boot option.

  Hello

  My company is the purchase of HP EliteDesk 800 G2, some comes with HARD drive and some with SSDS.

  Deploy us Windows 7 x 64 using SCCM using legacy startup.

  On a machine with installed HARD drive, I can configure the startup options to use legacy boot, but when I replaced the drive to an SSD the only option to start for this drive is UEFI.

  This causes the deployment fails because the player needs to be partitioned as TPG.

  On the other hand, if I disable the legacy, the UEFI boot PXE boot and partition the drive as GPT, after the deployment of a disk image is unable to start with error 0xc000000d (I guess that the cause is supported in Windows 7 because it does not work on Windows 8.1).

  Bottom line, I can install Windows 7 on a HP EliteDesk 800 G2 only if start legacy is enabled and I have partition the drive as UEFI.

  Is it possible to force the SSD at startup like legacy and not UEFI?

  This problem results from the workstation or is it applied by the SSD?

  Thank you.

  Hi Jay,.

  I appreciate you are trying to help.

  I guess that there are some problems of communication because it is a business problem and there are other technical components involved that I don't understand.

  After some research more, it seems that this problem occurs with a specific model of SSD.

  We'll just have to wait for HP support.

  Thank you.

• Elitedesk 800 LTS G1 reboot on its own

  Hello

  We have 20 units of Elitedesk 800 G1 SFF; running Windows 7 Pro 64 bit.  One unit, an intermittent problem.

  Use Shutdown of Windows, the computer turns off.  Some time later, during the night, it turns back on.

  Interesting note: we have a power-password set in the BIOS and turning on the results of the computer at a password prompt.  When this unit restarts randomly, it seems to bypass the password and goes directly to screen ctrl alt del to log into Windows.

  I tried to turn off all "wake" options I find for the NIC, the mouse, the BIOS settings and even tried the registry to HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon «PowerdownAfterShutdown» hack

  The BIOS, Chipset are updated, as are all the other drivers offered by HP.

  I witnessed the restart once - I stopped, looked at the front of the computer, all the lights were out, and it restarted.  I had not touched a thing.  Of course, I him didn't restart like that in front of me again. :-\

  Additional ideas?

  Thnaks

  Call our hp elite support @ 1-800-334-5144

• 800 LTS G1 EliteDesk: windows 10

  I bought 15 of these EliteDesk 800 pc for a customer. The customer wants 10 installed windows, but there is no media installation for it. Do I really need to download and activate on every pc or can I clone after the 1 upgrade? Or is there a download for the windows recovery 10 install?

  Hello

  Again, you have to talk with Microsoft, cloning of 1 machine to other machines will not work. 10 Windows will check the material and will not work. Microsoft can only open the door for you.

  Kind regards.

• EliteDesk Pro 800 G1: USB 3.0 BIOS Driver Windows 10 - Support

  Hello

  Try to get 10 WIndows to recognize the front USB 3.0 ports. Ports USB 3.0 rear are recognized as USB 2.0

  USB 2.0 ports work perfectly

  Note that the option in the BIOS: "USB 3.0 driver BIOS support.

  Does activate or Dissable for Widnows 10?

  Thank you

  @Jalor

  Clear the CMOS, and then reinstall the Intel chipset.

  Station drivers web site  I've used this site but especially for updated firmware, but not for drivers.

• HP Envy Phoenix 800-060 BIOS update

  HP came out with an update of the bios for my PC, when I ran the update looks like it took, but it seems that it is still the old bios version number.  The list I see is dated 80.07 from 05/06/13.  According to me, it should have updated the bios to version 80.20.  Any ideas?  Thank you.

  Kevin

  Hello

  Review of HP posted below the article. If secure boot is enabled, disable save settings. You should see a confirmation screen, forcing you to enter the number.

  HP Secure Boot Windows 8 themes

  Now try upgrading the BIOS.

• The BIOS for satellite 2100 CD boot

  I am installing the update of the BIOS after failure using my recovery disk. My CD player is unable to read the recovery disc. Have tried to install the BIOS, but the FDD tracks for about 2 seconds and then stops... Help!

  Hello

  From the BIOS update and entering the BIOS settings are two different things. If you want to get into the BIOS settings and check the Please use key F12 at startup.

  Before that you want to update BIOS please read this article
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/FAQ.jsp?service=EU&FID=TRO0000000b07.

  Good luck!

• Equium A60 BIOS update: what is the Boot Mode?

  Due to problems with my graphics ATI I have to do a BIOS update. To do my computer (Equium A60 PSA67E) apparently needs to be in mode 'start-up', NOT 'repeat mode '. In a previously sent forum somebody said the computer just "should be turned off" but I'm still not sure of how go to this mode. Is it just a case to go to the start menu, click on shut down the computer and turn off the computer again? But how do you know when it is in mode 'start '?
  Question: How do in boot mode? (I tried the update in 'safe' mode and it does not work)

  Hello

  Boot mode is meaning stop the laptop (BONE).
  It is important that the laptop is not in stand mode or hibernation mode.
  You just simply close the unit. That s all ;)

• Satellite A20: BIOS update to support USB booting

  Hello

  Does anyone know if there is a version of BIOS for a satellite A20 that supports booting from USB devices (except the drive, because that is already supported)

  I need this is because my cd drive is bust. And I'm a student, so I can't afford a new intern, but I have an external... So I want to use that one for the recovery process...

  I don't know if I can ask this, but can't I somehow change the bios that it WILL support the external dvd drive, I know this is not recommended at all, but I'm really really desperate :(

  Can someone help me?

  As far as I know that something like that does not exist. Your laptop is quite old and there is not much support for her especially BIOS support.

  Try to find the MS-DOS driver for this hard disk external. Start the laptop with floppy and use this driver for your external device from the device.

• U310 Impossible of Boot or BIOS enter or set the boot device

  Hello

  I've got U310 with bad hard drive. SYTUATION:

  Laptop on the old hard drive failed to load Windows 8.1 or recovery. When I try to go to recovery error apears. Windows cannot start propetly. I change the HARD disk again an SSD, but after that turn it on nothing happens, black screen. When push button recovery menu shows, but none of the 4 options does not work. Problem with the bios, I read something can not start after trying to recovery.

  Now I don't know how to install the new system on the laptop. I ' t is possible to upgrade the BIOS without a system?

  I had USB HDD with Installation of Windows 8 in UEFI (GPT) mode. Affter correctly install the system, upgrade the BIOS now computer laptop works very well.

• Satellite L300 - 03C - updated to v2.2 BIOS update then fail to boot on XP

  The L300 BIOS - 03C v2.2 update does not boot on XP
  Model: PSLB8C-03C01X
  Help, please
  My OS is WinXP SP3, BIOS was v1.4
  using the latest BIOS V2.2 windows file to upgrade (v1.4)
  Progress is normally finished, however it fail to start.

  I still can get into the BIOS Setup, but cannot run Windows XP at the login screen.

  So, what can I do?

  Thank you

  What happen exactly when you start your laptop?
  HARD drive is recognized correctly in the BIOS settings?

  You can boot OS in SafeMode (F8 at startup)?

• Satellite problem BIOS L750 - cannot change the boot sequence

  Hello reader/answering my questions.
  I am having trouble with my 750 ODN bios. This bios is an official update (3.6) from the center of support, and almost everything has been fine since (the plot thickens!). I decided one day I want to dual boot with linux, in particular Fedora (this is unrelated to this though).

  But, when I burned the disc and tried to direct (too test) boot the boot order has been on hard drive, first of all, I found! I rebooted and pressed f12 - did not work.
  I tried to delete and escape - neither worked. Then, I tried all the f keys - none of them worked.
  Whenever he took me to the Windows Start menu, and I explored it and I could not find anything.

  It is also important to mention that I'm under Win 7 SP1.
  I tried both PLoP and osloader (too boot from the dvd) - neither worked.
  I also do not remember what the button to start the bios was originally - Oops!

  Also toshiba with instructions logo never appears.
  I would really just change the order of boot however, the rest of the bios I don't need access too much right now.

  A separate issue is that Windows randomly decides he wants to check my hard drive, which takes forever, and he won't until he arrives to check it out. I think it may need medical help.

  But, no help, a qualified doctor or not, would be greatly appreciated.

  Thanks in advance
  Mitchell

  Hello

  > I also don't remember what the button to start the bios was originally - Oops!

  Pressing F2 by turning on the device could help you access the BIOS.
  But you do not need to change the boot order in the BIOS. You can do it by pressing F12. This should be done immediately after you have turned on the laptop.
  Then the start menu appears and you can choose the right boot device.

  Does it function?

• ... BIOS enable PCI-E graphic boot

  Aspire T3 - 605

  s/n DTSPYAA003

  SNID *.

  P/N DTSPYAA003

  BIOS P11 - A0

  Power supply FSP500-50AAGA

  Win 10 operating system

  EVGA GeForce 8400 GS DDR3

   

  Acer starts with white rear screen until windows loads. If I need to access the bios that I must remove the EVGA. I think looks only at startup integrated graphics card bios.

  All of the bios may be the case the EVGA as adapter of master boot in the BIOS of the motherboard? As value the option PCI-E or PEG? All I could find is the pci power turn on or off. I enabled it but still black.

  not the end of the world.

  Shawn

  Original graphics boards are only UEFI and I didn't find any option in the bios Setup utility:

  BD OF VGA. GT635.2G.UEFI.W/DVI/HDMI. ATX

  Your graphics card is apparently not UEFI. I suggest you to contact EVGA support to be sure.

  Sorry, no ideas.

• Update BIOS to M3450 with secure boot

  I have an Acer Aspire M3450 with an FX processor. I just read windows 10 will need a UEFI bios that supports support secure startup. There is an update on the Acer PO1.4A site. This update contains the UEFI update? The system I have now has UEFI but is 1.3 I believe and the new UEFI is 2.4. I ran the upgrade for windows 8.1 Advisor and he told me the same thing on my version of bios and no secure boot.

  I forgot to mention that my current bios is PO1. A2