HP Elitedesk 800 G1 DM: HP Elitedesk 800 G1 DM 10 Windows upgrade is not available

Similar Questions

• Problem installing disktop 800 wireless drivers for windows xp

  Problem installing disktop 800 wireless drivers for windows xp

  Hi Samir,

  I see that you are unable to install the drivers disktop 800 wireless. I'll help you with this problem.

  1. What is the brand and model of the computer?

  2. what security software is installed on the computer?

  3. have you made changes on the computer recently?

  4. What is the error you get when trying to install the driver?

  Please provide us with more information to continue troubleshooting as a result.

  See the link on how to ask questions or help on the Forums.

  Suggestions for a question on help forums: http://support.microsoft.com/kb/555375

  Refer.

  Wireless and wired network problems: http://windows.microsoft.com/en-US/windows/network-connection-problem-help#network-problems=windows-xp&v1h=win8tab1&v2h=win7tab1&v3h=winvistatab1&v4h=winxptab1

  Let us know if you need assistance with any windows problem. We will be happy to help you.

• HP EliteDesk 800 NIC question - 100 MB/FULL works not

  
  

  We have found a solution to our problem with the i217-lm

  Regardless of if we put the NIC at 100 MB/full, it has always tried to auto neg and neg to 100 Mbps half, despite all 100 MB/full switch and no auto Neg.

  To correct, look in the registry for the LinkNegotiationProcess key and set it to 2.

  In our case, there are 3 instances that need to change.

  The default setting is 1, which is to auto negotiate. 2 is forced. This solves the problem on all our 800 EliteDesk from HP.

  Reg keys if anyone is interested for our Intel i217-LM NIC:

  Windows Registry Editor Version 5.00

  [HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\Class\ {4D36E972-E325-11CE-BFC1-08002BE10318} \0007]

  'LinkNegotiationProcess' = '2 '.

  [HKEY_LOCAL_MACHINE\SYSTEM\ControlSet002\Control\Class\ {4D36E972-E325-11CE-BFC1-08002BE10318} \0007]

  'LinkNegotiationProcess' = '2 '.

  [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E972-E325-11CE-BFC1-08002BE10318} \0007]

  'LinkNegotiationProcess' = '2 '.

• Tower of EliteDesk 800 of G2: 800 swap system G2, computer Board is not fully configured.

  I just swapped a systemboard in a 800 G2. Installation is finished it and went into the bios to set the system ID's

  I have put all the your computer and I screamed a few times for typo'ing the FeatureByte, then it took. I rebooted and it jumped me in bios, asking if I wanted to validate the settings. Everything seems OK, then I say Yes.

  It restarts again and now I still see the message "the system is not fully configured" at startup.

  It gives me no indication of what the problem is.

  The configuration menu of the ID system is finished now.

  I tried to boot into the bios and hit ctrl-a to see if it would work, but I see nothing on the system ID in the Security menu.

  Any other suggestions to find out what is the cause?

  The tech came out.

  He could not get the editing mode (ctrl-a) to display the system id in the Security menu is.

  He checked that I have entered all the information correctly and that he was perplexed as well.

  He was on the phone with HP to order another motherboard when, after a few dozen restarts, the error has disappeared and has not returned.

  Nothing has changed in the bios. as we were able to edit previously entered values.

  I have no idea what caused it disappear, but we can mark this issue is resolved.

• X61t 800 MHz (PC2-6400) memory upgrade

  Upgrades memory to a X 61 Tablet possible 800 MHz (PC2-6400)? The standard is PC-5300, but the laptop has a 800 MHz FSB.

  I apologize in advance if this is a stupid question.

  -Keith

  
  

• S104nl Pavilion X 360: disappointing with HP, no support forum and HP 800 euro x 360 convertible s104nl does not support the SSD!

  I'm sad and I am disappointed with HP because I have no support in this forum (two question http://h30434.www3.hp.com/t5/Notebook-Hardware-and-Upgrade-Questions/Upgrade-to-SSD-in-my-new-HP-X36... and http://h30434.www3.hp.com/t5/Notebook-Hardware-and-Upgrade-Questions/Hp-x360-s104nl-is-compatible-wi... ) and that my HP Pavilion x 360 s104nl of 800 convertible euro... does not support SSD!

  I've tested my new SSD with old Acer laptop, works perfectly, in my new HP x 360 is not recognized!

  Antonio

  First of all it is a user to User Forum. We do not work for HP and HP are not responsible for what is said or not said. Now a version of English language of your maintenance manual is not accessible. Closest I can find is the one that covers models up to 099 and is probably correct:

  Manual

  The x 360 is not really meant to be open and updated by end users and when the laptop was sold to you no one said or implied that change hard drive for one SSD has been supported or allowed while keeping the warranty. You a Crucial SSD of MX200 with no information saying it was compatible and decided to install it.

  Access the hard drive appears on page 29. Yes, any computer that uses a SATA hard disk can use a 2.5 inch SSD SATA. Function properly, but if there is a model that has given the most compatibility problems is the MX Crucial series. Do not know why. Chances are that a different SSD will work very well. My favorite is the Samsung 850 Evo. OCZ made a good whole as PNY and SanDisk.

  This is how I think that the best information that you're going to get. Let us know if you have more specific questions.

• Code 800 b 0100 on Windows for Vista64 SP2 update

  Hello

  For a few weeks (December ' 09) I started to receive a notification indicating that one of my updates fails with Code 800 b 0100.  I clicked on help and he suggested I run the tool to "System Update Readiness Tool for x 64-based Systems"-I did.  After its completion, I still get the same error code.  I looked through the journal that it produces, but it is very big and I wasn't able to find anything of use.  After looking through Microsoft forums, I found a similar solution (http://social.answers.microsoft.com/Forums/en-US/vistainstall/thread/8f4ab273-8528-487f-8af3-aa75c7bb0186) who gave similar results.  I found another (CheckSUR.log) log file which seems to be more useful.  The log shows:

  =================================
  Preparation of control system was updated.
  Binary version 6.0.6002.22202
  Package Version 6.0
  2010-01-17 23:25

  Checking Windows Service Packages

  Checking of manifests package and catalogs

  Checking package Watchlist

  Watchlist checking
  (f) amd64_bthmtpenum.inf_31bf3856ad364e35_0.0.0.0_none_7ff053f99479855b CBS Watchlist component missing 0 x 80070002 Microsoft-Windows-WPD7IP-SKU-package ~ 31bf3856ad364e35 ~ amd64 ~ ~ 7.0.6002.18112.bthmtpenum presence of registry package failed, possibly an orphaned package on package watchlist
  (f) amd64_wpdfs.inf_31bf3856ad364e35_0.0.0.0_none_a5e566b2d3236f6d CBS Watchlist component missing 0 x 80070002 Microsoft-Windows-WPD7IP-SKU-package ~ 31bf3856ad364e35 ~ amd64 ~ ~ 7.0.6002.18112.wpdfs presence of registry package failed, possibly an orphaned package on package watchlist
  (f) amd64_wpdmtp.inf_31bf3856ad364e35_0.0.0.0_none_9f92d6d487384aad CBS Watchlist component missing 0 x 80070002 Microsoft-Windows-WPD7IP-SKU-package ~ 31bf3856ad364e35 ~ amd64 ~ ~ 7.0.6002.18112.wpdmtp presence of registry package failed, possibly an orphaned package on package watchlist
  (f) amd64_wpdmtphw.inf_31bf3856ad364e35_0.0.0.0_none_78371ba92ff2a242 CBS Watchlist component missing 0 x 80070002 Microsoft-Windows-WPD7IP-SKU-package ~ 31bf3856ad364e35 ~ amd64 ~ ~ 7.0.6002.18112.wpdmtphw presence of registry package failed, possibly an orphaned package on package watchlist

  Checking packages

  Control components store
  (f) CSI shows Zero Length 0x00000000 WinSxS\Manifests\amd64_microsoft-windows-imapiv2-base_31bf3856ad364e35_6.0.6002.18005_none_21148475c820f4ee.manifest amd64_microsoft-windows-imapiv2 - base_31bf3856ad364e35_6.0.6002.18005_none_21148475c820f4ee
  (fix) Zero length CSI file replaced manifest file of the CSI: amd64_microsoft-windows-imapiv2 - base_31bf3856ad364e35_6.0.6002.18005_none_21148475c820f4ee.manifest from: C:\Windows\CheckSur\v1.0\windows6.0-6002-shared-x64.cab
  (f) CSI shows Zero Length 0x00000000 WinSxS\Manifests\amd64_microsoft-windows-photovoyager_31bf3856ad364e35_6.0.6002.18005_none_bdc051132f776919.manifest amd64_microsoft-windows - photovoyager_31bf3856ad364e35_6.0.6002.18005_none_bdc051132f776919
  (fix) Zero length CSI file replaced manifest file of the CSI: amd64_microsoft-windows - photovoyager_31bf3856ad364e35_6.0.6002.18005_none_bdc051132f776919.manifest to: C:\Windows\CheckSur\v1.0\windows6.0-6002-shared-x64.cab

  Summary:
  Seconds executed: 2554
  Found 6 errors
  Fixed 2 errors
  County CSI shows zero total length: 2
  Correction: CSI shows a length zero.  Total: 2
  CBS Watchlist component lack Total count: 4

  ========================================================

  If there is anything I can to get my file system online (outside of a complete re-installation) please advise.  I'd appreciate any help.

  Thank you

  Well, you are right when it comes to try to resolve the error 800b0100: http://support.microsoft.com/kb/956702 recommend to run the CheckSUR tool & you've already done that.

  You are also right when it comes to KB970430 and whether you really need to install it: KB970430 is a 'non security-related update. ' The line less resistance would be just "hide". Below, [2].

  That said, Norton applications are notorious for not not upgrade (or uninstalling) itself. You can try the procedure in [1] below first, especially if a free trial of Norton is pre-installed on your computer when you bought it.

  Good luck!

  ==============================
  [1]

  1. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. After completing some you have a copy of your handy product key, uninstall all Norton software (including LiveUpdate and everything Norton Add ons) via Control Panel | Programs | Uninstall a program (or Control Panel |) Programs and features, if you are using the classic view).

  4 IMPORTANT! -Online activate Windows Firewall immediately after the restart.

  NB: Now you're "working without a net": no to ANYTHING else online (e.g., navigation, reading e-mail, chat) until you have completed step #8 below!

  5. right click on the file that you saved in step #1 above, and then select run as administrator.  DO TAP not your keyboard until the race ends, then restart.

  6 see if KB970430 now installs. Follow all the prompts, if the operation is successful.

  7. now make a clean installation of NIS 2010 using your product ID & reboot: http://www.symantec.com/norton/support/kb/web_view.jsp?wv_type=public_web&docurl=20080514162318EN

  TIP: Do not activate or install additional modules of Norton (for example, Norton Anti-Phishing) immediately.

  8. manually and repeatedly run LiveUpdate until you get a prompt "no update more".

  ==============================

  [2]

  1. stop the automatic updates service:

  Start > Right click on run , and then select run as administrator > services.msc (type) > [OK]
  Double-click automatic updates > click stop
  (Stopping the service will take a moment)

  2 remove the contents of the download folder:

  Start > Right click on run , and then select run as administrator >
  (type or copy/paste) %windir%\SoftwareDistribution > [OK]
  Open the download folder and delete its content
  Close the window.

  3 start | Control Panel | System maintenance and (if you use Classic view, skip this step). Windows Update |  View the updates available (or Select the updates installed): right-click on KB970430 | Click hide update | Confirm the prompt UAC (User Account Control), if any, & OK your way out.

  4. start the automatic updates service:

  Start > Right click on run , and then select run as administrator > services.msc (type) > [OK]
  Double-click automatic updates > click Start
  (Stopping the service will take a moment)

  --------------------------------
  To restore/show updates for Vista: Start | Control Panel | System maintenance and (if you use Classic view, skip this step) | Windows Update | Restore hidden updates: Find and select the update you want to install. Click restore. You can now select once again it and install through the normal process.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• LifeCam VX-800 works only on Windows XP

  So I just bought the camera and when I plug it in, it lights up but when I use it in Skype or take a photo, it is not detected and it will not show the unit.

  Is there any software I need to download? Not just you are asked to connect? I checked http://www.microsoft.com/hardware/en-us/d/lifecam-vx-800 and there was no software download as well.

  I also unplugged and plugged it back in and the same thing happens. Simply, it turns on and is not detected by the computer.

  I use Windows XP, the webcam works on XP?

  Hope someone can help me. Thank you.

  Hello.

  I don't know what I've got USB, but one thing is certain that I got the computer after 2003. When I pl-

  Ah, it works! I used Device Manager and reinstalled the drivers. Thanks for your help!

• Re: Satellite L300D-800 - specific settings for Windows 7?

  Hi This is unrelated to my previous post.

  I installed Windows 7 on this Vista laptop and it's a great software. But I think that Toshiba settings are missing which is the cause of overheating and shuts down.

  Can I do to prevent it from overheating? Toshiba recommended settings for my mobile specific for running Windows 7. Is it still possible to them?

  Thank you
  Kris

  Hey Buddy,

  Recommend that the settings say you or wait?

  In my opinion if your laptop is overheating, you should try to clean using compressed air stream. Blow gently and shortly with a jet of compressed air and, therefore, it of not necessary to disassemble the laptop. He could blow the dust from the cooling fans and should be done from time to time.

  Check this box!

• HP ENVY PHOENIX 800-030qe: the system recovery media does not support this computer

  Hello!

  I can't recover to factory settings using recovery media (4 DVD) after changing HD (the previous device has crashed/broken).  The message is: "the media recovey system does not support this computer. You are not able to restore this system with this media. »

  So, what should I do?

  Thank you very much.

  Luiz Borges

  Upgrade the BIOS/downgrade will not fix it unfortunately.

• Error code: 800 b 0100 on Windows Vista

  For these last days, I had problems with my Windows. All programs will be frozen after a certain period of time and I'll have to restart the computer. I've been doing system scans for the last days, and they say that there is a problem with my system files and my mom from CBS and the CBS catalogue are corrupt. I was wondering what steps I can take to address this problem, preference for less money as possible.

  Install the system update tool

  ========================================

  System resources, such as file of data, even in the data memory and registry data, can develop inconsistencies during the lifecycle of the operating system. These contradictions may be caused by various hardware failures or can be caused by software problems. In some cases, these inconsistencies can affect the Windows Service store, and they can cause software updates not do not work. The system update tool attempts to resolve these inconsistencies. When System Update Readiness Tool detects obvious incorrect files or the registry data, it can replace the incorrect data with a corrected version.

  1. download and run the tool update of the system from the link below depending on the Type of system:

  Update for Windows Vista 32-bit system tool

  http://www.Microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=b4d90b06-c27d-4483-bc1f-04d43fa7b293

  Update for Windows Vista 64-bit system tool

  http://www.Microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=f6f353c0-d00e-43e7-97EF-0feefc7ff064

  3. restart the computer.

  =======================================================================================

  Windows Update error 800b0100

  If you receive error 800b0100 in Windows Update, it means that a required byWindows update file is not properly registered Windows. System update readiness tool can correct some conditions that can cause this error. To use the tool, follow these steps:

  1. Go to the system update tool web page. In the information for advanced users section, find the windows version type and system of your computer, and then click the link to download the system update readiness tool.

  2. Run Windows Update again.

     Note

     • As a general rule, the scan takes 15 minutes or less, but it can take longer on some computers. Progress bar Windows Update is not being updated during the scan, and progress seems to stop at 60% complete for some time. This behavior is expected. The scan is still running and you should not cancel the update.

  Good luck if this post can help solve your problem, please click the 'Mark as answer"If you find it useful, mark it as useful by clicking the 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Windows Update encounter an error 800 b 0100/dt00 for Windows Vista will not download?

  I tried FitIt and fix and the tool of analysis, but all were unsuccessful.  It lasts too long. Help!

  I thank all those of you who have complied with my question, but that the problem has been resolved through ATT connect Tech who informed me that the download was corrupted, so it has been removed.

• Guess I fell for a scam! ...

  Received a phone call saying they were w / n Microsoft could give me Tech supp, for life for $85 - $ 90... It was the week before everyone pc, accident perhaps that my... They gave me an 800 # to call, which is of course not available n a g-mail... Even called my credit card company to see what they had, but it was also the g-mail... I only fall for this scam r did others get this call also?...

  Received a phone call saying they were w / n Microsoft could give me Tech supp, for life for $85 - $ 90... It was the week before everyone pc, accident perhaps that my... They gave me an 800 # to call, which is of course not available n a g-mail... Even called my credit card company to see what they had, but it was also the g-mail... I only fall for this scam r did others get this call also?...

  There was a week when all computers were crashing?  Isn't also well - all that is that the mass is usually false - play on your fears that you are in the same situation as everyone else - but 'someone' has the solution and it will cost you only...

  Have you contacted your banks, credit bureaus credit business andf card to let them know that you were locked into a scam?  That is your identity may be at risk?

  Did you change all your passwords online and offline and to the format of your machine - restore to factory settings?

  You must do all this.

  Except if you initiate the call - well - just hang on cold-calls.  If a company is desperate to get customers, they call you - they may not be good at what they do, or you would have heard from them by other means - something better than disturning * you * directly at home.

  http://www.Microsoft.com/security/online-privacy/avoid-phone-scams.aspx

• Windows 7 not genuine after the restoration of backup_activation error 0x80070005

  After a virus attack, I reformatted the drive and brought the whole system from a backup external drive (my drive C by BounceBack Ultimate clone).

  I started from the external drive, then restored, all on the internal drive.

  It was restored, but some programs (Microsoft Office and Photoshop) lost their activation.

  Now, I get the message "Windows 7 Build 7601_This a copy of Windows is not genuine".

  I tried all the ways to reactivate it, including 'slui.exe; slui 4 ", but still get access denied error code 0x80070005.

  I tried many suggestions found on the web. Nothing has worked. I came across the error code 800 a 0046 during an attempt of "slmgr.vbs". Permission denied.

  I tried to repair Windows by choosing 'upgrade' with the installation disc. But he won't because my current installation is newer (SP1 added).

  I can't access a place to re - enter the product key. In the control panel; Watch Windows activation "status: not available;" Product ID:Not available.

  I can't reach the activation of the phone either (slui 4 error, access denied).

  I feel really stuck!

  MGA report:

  Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->

  Validation code: 50
  Code of Validation caching online: 0x0
  Windows product key: *-* - XGTMM - 3987Y-QH9YK
  Windows product key hash: VEmrUbW4928uCwZDZHUDlYI2m0Y =
  Windows product ID: 00371-177-0656641-85525
  Windows product ID type: 5
  Windows license type: retail
  The Windows OS version: 6.1.7601.2.00010100.1.0.048
  ID: {639C64B6-1BE8-477A-95CD-3D413A40530A} (1)
  Admin: Yes
  TestCab: 0x0
  LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: Windows 7 Professional
  Architecture: 0x00000000
  Build lab: 7601.win7sp1_gdr.120330 - 1504
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  Given Vista WgaER-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002

  Windows XP Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 109 n/a
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Program may Explorer\IEXPLORE.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: fast
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->

  Other data-->
  Office details: {639C64B6-1BE8-477A-95CD-3D413A40530A}1.9.0027.06.1.7601.2.00010100.1.0.048x 32*-*-*-*-QH9YK00371-177-0656641-855255S-1-5-21-1215590110-421537934-3858050354Gigabyte Technology Co., Ltd.. GA-MA790X-UD4P Award Software International, Inc.. F5 20090603000000.000000 + 000CB853B07018400F204090409Time(GMT-08:00) Standard Pacific03109

  Content Spsys.log: 0 x 80070002

  License data-->
  C:\Windows\system32\slmgr.vbs(1131, 5) Microsoft VBScript runtime error: permission denied

  Windows Activation Technologies-->
  HrOffline: 0x00000000
  HrOnline: 0x00000000
  Beyond: 0 x 0000000000000000
  Event timestamp: 5:17:2012 11:27
  ActiveX: Registered, Version: 7.1.7600.16395
  The admin service: recorded, Version: 7.1.7600.16395
  Output beyond bitmask:

  --> HWID data
  Current HWID of Hash: MgAAAAEABAABAAEAAQABAAAAAQABAAEA6GHGus6DVPLgqBiIEDOyRV72wo8qzyodQho =

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes, but no SLIC table
  Windows marker version: N/A
  OEMID and OEMTableID consistent: n/a
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  APIC GBT GBTUACPI
  FACP GBT GBTUACPI
  HPET GBT GBTUACPI
  MCFG GBT GBTUACPI
  SSDT PTLTD POWERNOW
  TAMG GBT GBT B0

  Thank you very much for your help!

  Download the SP1 update for your language and edition of the links on these pages...

  Heidoc - Microsoft DR download links

  The links are for downloads from Digital River servers run for MS, so are about as safe as you can get :)

  Once you have downloaded, you then need to burn the DVD of it - use the Windows disc Image burner, or (even better) your favorite at the slowest possible speed burning application.

  Note that you do NOT "drag and drop" the file on the disk, you must use the option "burn image" of your app - or you will end up with a useless coaster :)

  Once you have the disc burned, check it to start the (or other) system OK - but do NOT start repair-you must start the repair of in a normal Windows startup.

  Follow the instructions in this tutorial - http://www.sevenforums.com/tutorials/3413-repair-install.html?ltr=R

  - and they should help you get through (it is not as hard as it sounds!)

  Always ask first if you are not sure - either here, or on sevenforums.

  Good luck with it!

  The letter change is quite normal - don't you worry about this :) BUT you must start normal windows and start the upgrade of statement, or you will end up with a clean install.

• Elitedesk 800 LTS G1 reboot on its own

  Hello

  We have 20 units of Elitedesk 800 G1 SFF; running Windows 7 Pro 64 bit.  One unit, an intermittent problem.

  Use Shutdown of Windows, the computer turns off.  Some time later, during the night, it turns back on.

  Interesting note: we have a power-password set in the BIOS and turning on the results of the computer at a password prompt.  When this unit restarts randomly, it seems to bypass the password and goes directly to screen ctrl alt del to log into Windows.

  I tried to turn off all "wake" options I find for the NIC, the mouse, the BIOS settings and even tried the registry to HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon «PowerdownAfterShutdown» hack

  The BIOS, Chipset are updated, as are all the other drivers offered by HP.

  I witnessed the restart once - I stopped, looked at the front of the computer, all the lights were out, and it restarted.  I had not touched a thing.  Of course, I him didn't restart like that in front of me again. :-\

  Additional ideas?

  Thnaks

  Call our hp elite support @ 1-800-334-5144