HP envy 100 D410a cannot replace the paper path door in the printer!

Has received a 'false' paper jam message and followed the instructions to remove door paper to address 'paper jam' path (it wasn't any paper stuck).  Now, it is impossible to replace the paper path door.  Help!  Thanks, Brooklynllp


This door can be difficult to get back up sometimes. The video below will show you how to replace the door on. Hope that helps.


Tags: HP Printers

Similar Questions

  • cannot replace the print cartridges CP1025nw

    I am trying to replace the print on my HP LaserJet CP1025nw cartridges.  I did several times.  But this time, I can not cartridges suitable for turning in place.  I press any button to specify which cartridge I want to replace, only yellow appears!  I tried switching the printer on and out on, and that did not help.  I really need to replace black, but cannot figure out how.  Any ideas?

    Hi @annie89 ,

    I see that you have problems with the carousel doesn't turn only not to be able to change the black toner. I would like to help you today.

    Make sure that the printer is connected directly to a wall outlet. (do not use a hub or a surge protector) This ensures that the printer is full on and can help this situation.

    You can manually move the carousel, by releasing the locking mechanism. Use something to push it.  Manually, back off the carousel, do not touch the toner however. I have also provided a picture where there are in fact two areas to leave, they are circled in red. The left side is easier to move.

    Cannot remove the ink cartridges.

    If the problem persists, I would like to do a hard reset.
    Let the printer and disconnect the printer cable and the wall socket for 60 seconds.
    Reconnect the power cable to the output of the printer and the wall, and not a surge protector.
    This ensures that the printer is full on and can help this situation.

    If you need help, let me know.

    Have a great day!
    Thank you.

  • HP envy 4500: PC cannot find the printer

    I ran the installation disk and printer tells me that I am connected. Wireless light is stable. PC cannot find the printer.


    I'm glad to hear that your problem is solved and everything works fine now.

    Good day!

  • I configured my printer (envy 100 D410A) online, but I can't eprint for my printer.

    I have send an email to my e-mail address of hp & it does not work.

    Hi sbcdtc,

    Try to check the desire for updates. Go to 'Setup' > "Web Menu" > "Product updates" > "check for updates". If there is an available update then let it install. After the update is installed the printer restarts itself. Once she comes back to life, search for the product updates once more to ensure that there is not another. Then try to send an e-mail to the address printer again. Also, you can check the status of your ePrint on www.eprintcenter.com jobs

    Although I work for HP, my messages and responses are my own opinion and not of HP.

    If I have solved your problem, please do not hesitate to provide laurels and make sure that you mark this thread as provided solution!

    -Josh M.

  • HP-Envy 100 D410a just shows (INITIALIZE) is on the screen!

    HP-Envy 100 D410a was printing then stopped. When I turned it back on, just shows the printer (INITIALIZE) is on the screen! It was after I left the power for hours. Can't do anything to the screen.  My firmware Version is: SLM1CN1039FR


    If your printer is connected wireless, make sure temporary connect the USB device, and then follow the patch below:





    Please let me know if this is useful,


  • HP envy 100 D410a, printer

    HP envy 100 D410a, the printer screen no longer works?

    Hello Teeveeaa,

    I'm sorry to hear that your screen of the printer does not work.

    Here is a document that walks through some troubleshooting you can try.

    If these steps do not resolve the problem, you need to replace your printer.

    I hope this gets the display for you.


  • ENVY 100 D410a: Printer loses connectivity after mode "Eve"

    I have 2 printers, OfficeJet 5746 and Envy 100 D410a and both meet the same problem.  They work very well, then after having been slowed, printing "printer not connected" is displayed.  I did the exercises to unplug the router, remove printers from the list, I checked the ip address and they start with 10.  I have reset the printer.  I went alone on the list of printers (envy) and the problem still persists.  Please, what can I do?

    Use the following link to create yourself a file number.
    Step 1. Open the link: http://support.hp.com/us-en/contact-hp
    Step 2. Enter the product number or select Auto detection (use officejet info)
    Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
    Step 4. Scroll down and click on options contact HP - click Get phone number
    File number and phone number are displayed.

  • HP Envy 5530: HP Envy 5530 told to replace the color cartridge, even after replacing with a new one.

    HP Envy 5530 said to replace the color cartridge, even after replacing with a new one.  Printer is 1 year old and I replaced the cartridges several times over the past year.  I am enrolled in the program of HP ink.  I can run the printer mode single cartridge using a black ink only and it works with my pc XP, Ipad, Chrome pc and mobile phone.  My pc win 8.1 will not print anything other than a test page.  Printer on the pc file lists always attention required when you try to print from the pc win 8.1.  I believe that the problem may be related to surface of cartridge for printing inside the HP envy heads 5530.  This part is available for purchase, and if so, where?

    I found a work around.  On the pc win 8.1, it seems that the print request must see a reset of the HP envy 5530 to print mode single cartridge.  I just start the pc and then reset the printer by lifting the hatch for the print heads.  That's all.  Once this is done, the 'attention required' message goes to the loan and it is able to print.  It will open a window, which suggests you add the color cartridge, but it will disappear when printing.  Simply open the door once and you can print until you turn off the pc.

  • I replaced a HP with an Epson Stylus all-in-one printer and cannot get the printer to print more than one page when printing from the computer.

    Original title: new printer

    I replaced a HP with an Epson Stylus all-in-one printer and cannot get the printer to print more than one page when printing from the computer.  The printer works fine when printing from a laptop or ipad!

    Start by going here--> http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?UseCookie=yes&oid=232591&prodoid=63099059&infoType=Downloads&platform=nodetect

    If the web page has not correctly detected your operating system, select it by using the drop-down list.  Rather than using the "Combo package" recommended but huge, expand the "Drivers" section and download driver printer v2.32 to a location that you will remember later.

    • Click on the ORB start and go into devices and printers.
    • Select (click) the icon of your Epson printer.
    • Once you have selected the printer, a button labeled "Print server properties" will appear in the toolbar.  Click on this button.
    • Click the "Drivers" tab on the print server properties dialog box.
    • Select the Epson printer in the list of installed printer drivers, and then click 'remove '.
    • In the context menu, select "Remove driver and driver package" and click OK
    • Click Yes, and then delete
    • Once the removal process is complete, restart the computer (probably not really necessary, but can't hurt)
    • Install the driver and the software using the file that you downloaded earlier

    At this point, your printer should work fine.  However, if you want the ability to print by emailing a file to your printer, you may need to install both 'Remote Printer Driver v1.65' in the category 'Pilot' and "v1.30 utility Configuration of printer Epson Connect" in the "Utilities" category

  • P1102w - cannot find the printer


    I'm unable to print using a wireless connection.

    the printer is p1102w.

    operating system is MAC OS 10.10 Yosemite

    Whenever I try to print something I get "printer is not connected / cannot find the printer" message.

    I tried the solutions on your support site, but nothing helped.

    For sure, printer is connected to the same network as the computer. I see it on the print configuration page and I can connect to its IP address via a web browser (but I can't use web services).

    All software and drivers are up to date. Update Apple is nothing new to me. Niether have your site.

    I tried to move the printer closer and further away from router. No results.

    No web proxy is related to my network.

    To make this work, I have to remove the printer from my system, reinstall it using the USB cable, and then add it again via wi - fi.

    But some time the problem reappears.

    It's really frustrating. Help, please.

    Hi @xopot ,

    I see that you have problems printing via wireless network. I would like to help you today.

    Since you can access the printer embedded Web server, the printer would have a valid IP address. Most likely, it has something to do with the software that the printer uses.

    Fix permissions of the drive on the Mac:

    Close all applications.

    In the Apple menu, click OK, click Applications, and then click utilities.

    Double-click disk utility.

    Highlight your hard drive / partition on the left.

    Click on check and then repair disk permissions.

    Restart the computer...

    Reset the printing system:

    Note: This will remove all printers in the print and Fax/Scan, any printer deleted can be re-added later by clicking the sign plus (+) symbol.

    Click on the Apple icon and then click on System Preferences.

    Click on Printers & Scanners.

    Make a right click (or Ctrl + click) in the left white side panel, and then click Reset printing system.

    Click OK to confirm the reset.

    Type the name and the correct password.

    Click OK to reset the printing system.

    Then click on the sign to add the driver, highlight the printer +. (you may need to click the drop down menu to select the name of the printer) Then click the Add button.

    Configure a static IP address for the printer.

    The printer is not found during Installation wireless.

    Do not take into account the title. Select the Solution 4: assign your printer a static IP address.

    If you need help, let me know.

    Have a great day!
    Thank you.

  • Cannot find the printer HP Deskjet 3055 has wireless

    Hi bought this printer and went through the set up disc. The printer is connected and has the right signal to our home network and the laptop also connects wirelessley to the internet just fine. The laptop cannot find the printer - I tried all the suggestions and put the IP address for internet search and it will not. I can't understand. Also tried to install on the MAC laptop and still only goes up to now and then are unable to communicate with each other. Please can I have some advice.

    Oh, wait a minute--I just got it working by stopping laptop, printer and disconnect the wireless router and all start back them up again. Then to try to make it work on the MAC laptop - what this space! Thanks for the help.

  • Cocomputer cannot find the printer and I do not have a disk for it

    Original title: printer SUPPORT

    my computer cannot find the printer and I do not have a disk for it

    Then, download and install the appropriate drivers on the printer manufacturer's support web site.

  • Cannot install the printer and windows update error 80070026

    Original title: Registry Editor not work cannot install the printer

    I have Vista the operating system on a Dell laptop with a Core 2 duo, map of Nivea.  Norton Antivirus now after it has started.

    Tried to install the dell printer after uninstalling all printers.   I scan my system using promp... sfc/scannow then I got windows results resource protection found corrupt files but was unable to fix some of the them.details are included in convertible bonds. Journal windir/logs/CBS/CBS.log
    for example:C:/windows/log/cbs/cbs.log

    I looked in the directory C find regedit.exe to rename, but was unable to find it.   I found these if this can help.


    I also got error or popup that without running windows Explorer and then restart it.   I can't install the printer as it pops up and I need to close the program.

    also receive error installer that it is already running
    install GUI is unresponsive

    error code 80070026 during the installation of windows updates.  I open without addons and updates are all to date.

    I'm sorry that there is so much information and error codes.  I think that all what concerns the corrupted files.   Can you help solve c drive please.


    1. What is the serial number and model of the printer?
    2. What are the failed updates?
    3 have there been any changes made on the computer before the show?

    I suggest you try the steps to solve the problem with the installation of printer.

    Method 1:
    Run the Fixit and check if it helps.

    Hardware devices do not work or are not detected in Windows

    For more information, see the links:
    Find and install printer drivers
    Search for a printer, the manufacturer Web site
    Add or remove a printer

    I suggest you try the steps to fix the problem with Windows Update.

    Method 2:
    Put the computer in a clean boot state to see if there is a software conflict as the clean boot helps eliminate software conflicts.

    Note: After completing the steps in the clean boot troubleshooting, follow step 7 link to return the computer to a Normal startup mode.

    Method 3:
    Temporarily disable the security software.

    Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable the antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network at the time the anti-virus software is disabled, your computer is vulnerable to attacks.

    Method 4:
    You can also manually install updates (KB number) by downloading from the Microsoft Download Center.

    For more information, please see the links.

    Problems with installing updates
    You cannot install some programs or updates

    Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
    322756 (http://support.microsoft.com/kb/322756/)
    How to back up and restore the registry in Windows

    Warning: An upgrade on the spot is the final solution before you have to reinstall the operating system. Note that it takes as much time to do the upgrade as to reinstall the operating system. In addition, some of your custom Windows settings may be lost through this process

    Hope this information is useful.

  • Replacing the print head - carriage doesn't move to the left

    I have an Officejet Pro 8500. I am trying to replace the print heads, but the carriage does not move left as it should to access the print heads. I tried now hold the * key and I tried to turn on/off the printer twice, but it still does not move when I open the lid. How do I move? Help, please!

    I managed to solve this problem by pressing the 'OK' button instead of ' * ' button. The new print head works very well. Yay!

  • Cannot install the printer HP C4500 on Windows 7

    Cannot install the printer HP C4500 on Windows 7 - printer installation disc only supported by xp and vista.  What should I do?

    Yes, your solution worked, and I was finally able to connect my C4500 printer as wireless.  Thank you very much for your help!

Maybe you are looking for

  • punch in the click causes

    Logic Pro X punch in recording gives a click at the entrance and exit points.  Is there a trick or to avoid this?  Thank you.

  • Maximum RAM for 13 and 15 inches?

    A quick search on Google shows that the RAM maximum 8 GB for models 13 "and 15" for late 2011 and mid-2012. My uncle has a 15 "end 2011 MBP with 16 GB. The 8 GB means 8 GB in each slot? I was looking to upgrade my MacBook like they turned slowly.

  • Updated to ios 9.2

    Now when I press the music, 'Apple Music' screen is displayed and does not disappear. Cannot get my music more. What gives? Am I supposed to put something?

  • Example of 7604 MID programs

    I can't find a sample program for mid-7604. Example Finder NOR will not yield any success. Is it possible that I have not a driver or a service pack installed? Thank you

  • Acer V5-473PG - mSATA port

    Hello Acer v5-473pg has an additional mSATA port as the largest variant of 15.6-inch? Version of the model is: NX. MB9EG.001 Thank you!