HP Envy 13 d045tu: could not start the Envy 13 d045tu

Similar Questions

• A small flag appears on the bottom of my screen that says activate security service Windows, but when I try to turn on it says could not start the Windows security service

  Original title: HELPPPPP

  My computer a little flag in the background with a x... said red it turn security service windows, but when I try to turn it on... it said windows security service cannot be started :/

  Hey ChelseaHarris,

  Take a look at two responses in the thread below the link to see if they allow the Windows launch security service:
  Could not start the Windows Security Center service.

  If these steps do not help, try to run a full scan using the Scanner from Microsoft which can be downloaded using the link below:
  Microsoft safety scanner

  Hope that helps.

• I have error #1053 windows could not start the printer spooler. Help

  Windows could not start the printer spooler. I received the error #1053.
  whatever it is sent to the printer never finished loading and crashes to the top
  my computer, so I have to re - start.

  This forum is for posting comments on the web site of Microsoft Answers, is not for technical questions.  Ask your questions to http://answers.microsoft.com/en-us/windows/forum/hardware, making sure that you specify your Windows version in the drop-down lists at the top.

• Could not start the time service windows on the local computer 2 error

  Cannot update the system clock of time Internet.

  After double click to display the time in the taskbar, the Date and time properties window appears.

  Then I time tab-click Internet, and then click Update now - this produces the following message...
  "Year error occurred getting the status of the last synchronization." The RPC server is unavailable ".
  Then I clicked on start > Control Panel > Administrative Services > Services > time Windows
  I click Start the service and get the following message...
  "Could not start the time service windows on local computer."
  "error 2: the system cannot find the file specified."
  Help!  What now?

  Hello

  Glad to know that the problem has been resolved. If you have additional questions on the computer, please ask your question about Windows and we will be happy to help you.

• Receive automatic updates for Windows XP "error 127: the specified procedure could not be found." Also "error 0 x 80240036: could not start the service automatic updates on local computer»

  Update CPU which proved later to be bad.  Replaced by original CPU.  Re-installed Windows XP Home using a slipstreamed CD that I burned the original non - OEM drive that has Service Pack 2.  Integrated Service Pack 3 which I got from the MS. site  Everything works well except for Windows Update.  The setting seem to be correct in Administrative Tools/Services.  The status of the Service is "stopped".  When I try to start the automatic updates from Administrative Tools/Services I receive "error 127: the specified procedure could not be found."  Also "error 0 x 80240036: could not start the service automatic updates on local computer»  Used the range of anti-virus and malware and found nothing.  Currently using Avast 7.0.1426.  I also used various tools of Fix - It MS nothing helps.  Any help would be greatly appreciated.  Thank you.

  Hello

  1. what application or antivirus security suite is installed and your current subscription?

  2 Norton (another) or a McAfee application ever installed on this machine?

  3. What are the fix applications that you used so far to try to fix this problem?

  Try the next method and check if that helps you with the question of the 127 error you receive.

  Method 1: Rdding the DLL file by doing the following:

  1. Click Start and click Run, in the search box type CMD and press to enter.
  2. right click on CMD in the list and click "Run as Administrator".
  3. type the following command and press ENTER. Regsvr32 msvcp71.dll
  4. close the command prompt window.

  Method 2: run the file system (CFS) Checker:

  (Note: you need an XP installation disk to start the System File Checker search.)

  The SFC command is used to detect and resolve problems with the files on Windows XP and Windows Vista computers. This command allows you to launch the Windows File Protection Service and allows you to analyze all integrity-protected Windows files and replace all problematic files identified.

  1. click on start, and in the box to start, search type CMD
  2. right click on CMD in the list and click "Run as Administrator"
  3. type the following command and press ENTER. Sfc/scannow
  4. close the command prompt window.

  For more information on scan SFC (System File Checker), please look in the link mentioned below.

  http://support.Microsoft.com/kb/310747

  I hope this helps.

• Could not start the Security Center Service

  I clicked on Windows security alerts, it showed "The Security Center Service is disabled".  Then I clicked "Activate now", came a "Could not start the Security Center Service" message.  Please tell me what I need to do.

  Thank you very much!!!

  Longpo

  See if these are useful:

  http://support.Microsoft.com/kb/2519899

  OR

  http://support.Microsoft.com/kb/2510301

• Could not start the Windows Vista firewall

  Hi all

  I can't start the Windows Firewall service in anyway.
  I can't open it via Control Panel, as it is said simply: "the Windows Firewall settings cannot poster because the asscioated service is not running. You want to start the Windows Firewall service? »
  I click "Yes", then he said: 'Windows cannot start the Windows Firewall service. There is no error code indicated.
  I tried running "wf.msc" using the Microsoft Management Console. When this window appears, he says: "there was an error opening the Windows Firewall with advanced snap-in security.; The Windows Firewall with Advanced Security snap could not load. Restart the Windows Firewall service on the computer that you are managing. "Error code: 0x6D9.
  As it seems, I can not start it this way or the other.
  I pressed Ctrl + Alt + Delete and click on the Services tab, then click services on the bottom, and this opens the Services window.
  In the new Services window, I try to start the service "Windows Firewall". I get a message saying: "Windows could not start the Windows Firewall service on the Local computer.; Error 1068: the dependency service or group could start. »
  Therefore, it does not. The service is set to automatic.
  I found another process called 'Base filtering engine', which I discovered is related to the use of the Windows Firewall service. Then, that I try to start this service, and he said: "Windows has no start the engine service of filtering based on Local computer." Error 0 x 80320009: an object with this GUID or LUID already exists. »
  Still, I can't find a way to fix the problem. In addition, the service is set to automatic.
  So if someone could help me, give me ideas or tell me how to solve the problem, it would be greatly appreciated. Thanks in advance.
  P. S. sometimes, when I type things in the command prompt, I get a message saying that "the requested operation requires a rise." What it means
  ?
  EDIT:
  The base filtering engine
  IKE and AuthIPsec Keying Modules

  Internet Connection Sharing (ICS)

  IPsec policy agent

  Routing and remote access

  Windows event collector

  Windows Firewall

  All of these services don't work, with each saying "Windows did not start the * service * service on Local computer.; Error 1068: The dependency service or group could start. ", with the exception of the Base Filtering Engine service.

  EDIT:

  I believe that the motor of filter of Bae is the root cause of the problem, because when I try to start it, it says "Windows cannot start the engine service of filtering based on Local computer. Error 0 x 80320009: an object with this GUID or LUID already exists. ", so that all the other programs on this service, said depedent" Windows did not start the * service * service on Local computer. " ; Error 1068: The dependency service or group could start. ».

  EDIT:

  Hello everyone, I solved the problem. The problem is a corrupted, file called "secdrv.sys. To resolve this problem, I had to first download the file "secdrv.sys' out of my operating system CD. To do this, you must create a partition and "mount" a file on CD, on the newly created partition. The file you have to climb is and is called: "*: \sources\install.wim. Extending .wim means a "file system Windows Image" and to see what files it contains, you will need to download what we call the "Windows Automated Installation Kit". Explicit instructions on the installation procedure and where to get this program, is here: "http://www.vistax64.com/tutorials/86959-access-vista-install-dvd-files.html". Once you have the file mounted, just search the area mounted for "secdrv.sys", then copy and paste it in "C:\Windows\System32\drivers" or that where the drivers from your system. After that, restart and the BFE service and all of its dependencies should work properly. Thanks for the good help like SpiritX.

  Hello everyone, I solved the problem. The problem is a corrupted, file called "secdrv.sys. To resolve this problem, I had to first download the file "secdrv.sys' out of my operating system CD. To do this, you must create a partition and "mount" a file on CD, on the newly created partition. The file you have to climb is and is called: "*: \sources\install.wim. Extending .wim means a "file system Windows Image" and to see what files it contains, you will need to download what we call the "Windows Automated Installation Kit". Explicit instructions on the installation procedure and where to get this program, is here: "http://www.vistax64.com/tutorials/86959-access-vista-install-dvd-files.html". Once you have the file mounted, just search the area mounted for "secdrv.sys", then copy and paste it in "C:\Windows\System32\drivers" or that where the drivers from your system. After that, restart and the BFE service and all of its dependencies should work properly. Thanks for the good help like SpiritX.

• Windows could not start the background service Itelligent transfer service on local computer. 87 error: The parameter is incorrect

  I had a crash dump blue screen, tried solutiions to the problem and told me to go to windows update and download all windows updates. downlownloading all updates failed and I got the error.

  Code 80246008

  Click on get help with this error and was instructed to go to services and start the background intelligent service services, it gave me the error message;

  Windows could not start the background service Itelligent transfer service on local computer. 87 error: The parameter is incorrect

  Not very computer savvy! no idea what it all means or what I would do to this topic! Thanks a lot for any help

  Try this:

  To change or restart the Service (BITS) Background Intelligent Transfer

  1. Open administrative tools by clicking the start , clicking Control Panel, clicking system and Maintenance, and then clicking Administrative Tools.

  2. Double-click Services. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  3. Right click on the service of Intelligent Transfer (BITS) background and then click Properties.

  4. Under the tab general, next to startup type, make sure that automatic (delayed start) is selected.

  5. Next to Service status, check whether the service is started. If not, click Start.

• try to start the bonjour service, but get the error message: windows could not start the Bonjour service on local computer

  error message
  Windows could not start the Bonjour service on local computer
  Error 5 access is denied

  I have Vista Home.

  This prevents me to update I have tunes.

  Completely uninstall iTunes. Download the update manually from Apple or here. Restart the system and then install the software you have downloaded.

• Could not start the Windows Security Center service.

  Could not start the Windows Security Center service. Tried to go to Services, but this message. Help me please!

  the error code says...

  one or more ActiveX controls could not be displayed because that is:

  1. your current prohibiti of security settings on this page activex controls running or,

  2. you have blocked an editor of one of the controls.

  Hello

  ·        Since when are you facing this problem?

  ·        Remember to make changes to the system?

  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following link. http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  I suggest you follow the steps mentioned below.

  a. click on Start menu and type regedit.exe in the start search box and press ENTER.

  b. navigate to the following location. You must remove 1 (parasite) of additional area

  HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Internet Settings\Zones\
  with number Pseudo-graphique, you will see before the number of zone 0.

  c. check to see if the problem is resolved;

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Disk Defragmenter could not start the service task scheduler is not running. Start the Task Scheduler service, and then try again.

  im getting this message if I want to run Disk Defragmenter... "Disk Defragmenter cannot start the Task Scheduler service is not running. Start the Task Scheduler service and try again. "tried to start the Task Scheduler on services.msc, but it gives me the message" windows could not start the Task Scheduler on the computer local error 2: the system cannot find the file specified. '. »

  Hello

  See if run the checker (SFC.exe) system files using the parameter/scannow help.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7:
  http://support.Microsoft.com/default.aspx/KB/929833
  Ramesh Srinivasan, Microsoft MVP [Windows Desktop Experience]

• Windows could not start the diagnostic policy service error 5 access is denied

  This started happening when I accidentally turned off my computer while it was the starter.

  I tried sfc/scannow, I did the CMD (net localgroup administrator) thing and tried manually from politics, nothing helps.

  Here is a screenshot of what, in my view, seems to be the problem. I am the only administrator of my computer,

  Hi John,.

  Thanks for posting your question on the Microsoft community.

  I would like to know some information about the problem so that we can help you better.

  You made any hardware or software changes on your computer before the show?

  Thank you to provide detailed information on the issue and your efforts to resolve.

  This problem can occur for the following reasons:

  -Windows Firewall is not defined by default.
  -Windows Firewall does not start.
  -Windows could not start the Windows Firewall.

  I suggest you try following the steps provided in this Microsoft article knowledge based and check if it helps.
  Reference:
  Some services do not start in Windows Vista and Windows 7
  http://Support2.Microsoft.com/kb/943996

  Note: Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  http://Windows.Microsoft.com/en-us/Windows/back-up-registry

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Windows could not start the service Windows search on the computer Local (Error 1053)

  Windows Search does not work on the start menu, nor IE8 remembers the URL history more.

  I tried the procedure described in this post (does not work): http://social.answers.microsoft.com/Forums/en-US/w7files/thread/8d68d244-afca-4006-a6eb-57d4dd9d58df

  I ran a scan sfc, who has not returned this any integrity issues have been detected.  I also tried to disable the Windows search feature to "Turn Windows features on or off", rebooted and tried reactivation, without success.

  I tried to create a new profile, but the same problem occurred.  I discovered that WSearch service does not work.  When I try to enable it, I get the following error:

  ---------------------------
  Services
  ---------------------------
  Windows could not start the Windows Search service on Local computer.

  Error 1053: The service did not demand launch or control in a timely

  I did some searching on the forum, but I was unable to find a solution to this problem.  Any help would be greatly appreciated.

  Yep, http://www41.zippyshare.com/v/30503880/file.html

  Unzip it, and then apply this Difficulty REG. Ramesh Srinivasan, Microsoft MVP [Windows Desktop Experience]

• BlackBerry Smartphones could not start the camera

  When you try to start the camera, I get this message... Could not start the camera.  Close other applications and try opening the camera again.

  I have nothing else other running the phone itself is waiting for a call.  I can't find anything on the Blackberry support for the same problem unless I'm missing it.

  When I got on the phone a few months previously, it worked fine and I could send pictures, now he's stuck.

  Thanks for any help.

  CB

  Hello

  It's worth a try:

  Go to the OPTIONS - ADVANCED OPTIONS - HOST ROUTING TABLE click here to enter, then the menu button to register now.

  You will receive an email for verification.

  Remove the battery while the device is activated, replace after one minute,

  Let the device reboot 1-3 minutes, try again the camera. Please let me know! Thank you

• Windows could not start the Microsoft Office Service on the local computer

  The whole error is

  "Windows could not start the Microsoft Office Service on the local computer error 1053; Service has failed to demand launch or timely control.
  It seems that this instance of office 2013 has stopped working.
  Win7 64 bit machine with all sorts service packs, etc. was in a field, we moved to a new domain, and it worked well for one day, now it has this problem. Any advice or suggestions would be helpful.

  Hello

  Since you are faced with the question after changing to the new domain, the question you posted would be better suited for the IT Pro TechNet public. I would recommend posting your query in the TechNet Forums to get help:

  Forums TechNet Windows 7

  Let us know if you need help with Windows related issues. We will be happy to help you.

• Windows could not start the windows on the Local computer firewall

  Original title: I don't have the first response says.then the following error code came.
  Windows could not start the ICF on local Computer.For more information, review the system event Log.If this is a service not microsoft, the supplier of service relationship and refer to the specific service 5 error code

  Hello

  Thanks for posting the request in the Microsoft community forums.
  The problem description, I understand that you receive the error "Windows has no start the firewall windows on the Local computer. To resolve this problem, please answer the questions.

  1. what anti-virus software is installed on the computer?
  2. do you have a third party security/firewall on the computer?

  If Yes, then you may not be able to start Windows Firewall, since you have a 3rd group of firewall installed.

  Even if you can re-enable the Windows Firewall, you can not run two firewalls at the same time.

  Try the troubleshooting suggestions provided to start the Windows Firewall.

  Method 1:

  Run the fix it from the link to the problems of the Windows Firewall Service and check.

  Diagnose and automatically fix problems of Windows Firewall service

  http://support.Microsoft.com/mats/windows_firewall_diagnostic/en-us

  Method 2:
  You can check the service for the Service of Windows Firewall if it is started or not.

  a. Click Start.

  b. in the start search box, type Services.

  c. click right on - run as admin.

  Check if the below mentioned services has mentioned State and type start.

  Firewall Windows started Automatic\Manual.

  base filtering engine Automatic\Manual has begun.

  driver authorization Windows Firewall started Automatic\Manual.

  Also check the dependency services that are required for the execution of the Service Windows Firewall.

  Method 3:
  You can scan System File Checker to fix corrupted files.
  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  Method 4:
  If the problem persists then, try the steps from the link.
  Some services do not start in Windows Vista and Windows 7

  http://support.Microsoft.com/kb/943996

  Registry warning: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/ )

  How to back up and restore the registry in Windows

  Hope the information is useful. If you need help with the Windows Firewall, feel free to post you question in the forum. We will be happy to help you.