HP Envy 13 laptop: how to use the updated drivers in HPSupport

Hi - I use HP Support Assistant to update the drivers.

However when I look on the HP (Software and Driver Downloads) customer support page, there are many pilots appear.

I'm not clear if I should go through each of them and install them? What is a list of the drivers already installed?

(I don't know if the update column means the date the driver was updated in the list, or on my laptop).

If all these must be updated, then why are they not updated by HP Support Assistant?

Thank you very much

Hello

HPSA will pick up the correct drivers for your computer. On the HP customer care, you can see more drivers you need especially the network drivers. Please don't install all of them, it's more harm than good.

Kind regards.

Tags: Notebooks

Similar Questions

  • How to use the update updates 5.1.0a to 5.1.0b?

    Sorry, I'm a newbie.

    Can someone please advise me on how to upgrade my ESXi of either 5.1.0 & 5.1.0a to 5.1.0b using the Update Manager?

    Is it possible to update without having to use the ISO (using the installation of patches)?

    I have 2 main questions:

    1. impossible to update Manager (someone has helped me create a baseline using downloaded ISO "VIMsetup")

    -Guest disconnected with weird error console (sorry no screenshots that I discovered that it was a NETWORK card driver problem much later)

    -Blocked 26% (if you use the Update Manager)

    -some weird message on console, can only view or list a few config

    2. cannot perform direct upgrade of iso or disc bootable on Dell G 12 servers (Dell R320 & r.620)

    -No found NETWORK card (if you use disks or virtual disks via iso mount)

    The file ~3.4GB (arther than 3 TB) you mention is very probably the package of vCenter Server (VMware-VIMSetup-all - 5.1.0 - 947939) and does not contain installation ESXi (VMware-VMvisor-Installer - 5.1.0 - 799733.x86_64.iso).

    Update Manager cannot be used to update or patch vCenter Server, but only the ESXi hosts (or virtual appliances).

    André

  • HP envy 14-2090eo: can I use the same drivers for windows 8 and 8.1

    When I check in drivers which operating systems there are drivers available for my Hp Envy 14-2090eo, it says Windows 8 (64-bit) and Windows 7 (64-bit), "and im currently using Windows 7 64 bit" but does that mean the drivers to support these 2 Windows 8 and 8.1 of Windows operating systems, said in a different way "» : are the same drivers for Windows 8 and Windows 8.1?

    Best regards from hpenvy1

    Hello:

    Your model has the AMD/Intel switchable graphics.

    It is unlikely that the W8 AMD graphics driver will work on W8.1.

    Normally, you can use some of the drivers W7/W8 on W8.1, but the graphics is very doubtful - not switchable graphics anyway.

    You can run the windows 8.1 upgrade wizard and see what it reports.

    http://Windows.Microsoft.com/en-us/Windows-8/Upgrade-Assistant-download-online-FAQ

  • How to use the Update Manager

    I'm going to update ESXi 5.5 hosts my cluster but I know Update Manager component, so I ask if it is possible to host unique patch so that I can test VM on it and then to extend the update to the other guests.

    Can you offer me to apply all updates or it is usually to give priority to the security updates? I use Vmware image of HP because my hosts are server blades Proliant.

    How can I start? You have to suggest the quick start guide?

    Update Manager downloads the list of patches available from vmware.com. To configure the frequency of the update of the repository, click on House. Click the Update Manager icon. On the Configuration tab, click Patch download calendar.

    To view the scheduled task Patch download, click Homepage > scheduled tasks > VMware vCenter Update Manager Update to download.


    Notes:

    • To manually run this task, right-click the task, click run.

    • When you run the task, see task Download Patch definitions in the these last tasks.

    • If the download Patch definitions task fails, make sure that Update Manager can reach vmware.com. For more information

    To set baselines to the ESX host:

    1. Click home > hosts and Clusters.

    2. Highlight the ESX host, you want to update, and then click the Update Manager .

    3. Click on Attach. Select host patches critical and not critical host patches of baselines, and then click attach.

      Note: to create basic custom lines click home > Update Manager > planning and groups > Create.

    To analyze the ESX host for missing patches on the repository, right-click on the ESX host and click find updates > patches and Extensions > Scan.

    Notes:

    • Scan progress is displayed by The entity of Scan task in the recent tasks.

    • The analysis of the host does not affect running virtual machines.

    • If parsing fails, make sure that the ports between Update Manager and the ESX host is open. For more information, seerequirements of ports network VMware Update Manager (1004543).

    • When the analysis is complete, you will see the number of missing patches on the ESX host. If some patches are missing, you see Compliant.

    To restore the missing patches to the ESX host:

    1. Turn off all the virtual machines or vMotion them to another ESX host.
    2. Place the ESX host in maintenance mode. Right click on the ESX host, choose to enter the Maintenance Modeand click on Yes.
    3. Right-click on the ESX host and choose clean > host patches critical and not critical host patches of baselines, and then click Next.
    4. Choose which updates or patches to install, click Next > Next > Finish.

    Notes:

    • Progress of sanitation are illustrated by the task of the principal remedy in the recent tasks.

    • This task could take some time as Update Manager starts to download the patches to the vmware.com website.

    • If the restore fails, ensure that Update Manager, ESX host, and vmware.com ports are open. For more information, see requirements of ports network VMware Update Manager (1004543).

  • The ESX host could restart after complete rehabilitation.

    Also, you can check out the link below to watch the video and more on

    http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=1019545

  • HP Envy 700-216: how to use the files in my System Recovery folder on my desktop?

    I had to do a recovery of the system, due to damaged or corrupted Windows files. I backed up my files on 9 DVDs. System Recovery has restored the files in a folder on my desktop, but how do I use them?

    I'm mainly interested in restoring my data to my Quicken 2010 and possibly my 2015 AutoCad.

    You are welcome.

    The only answer I have for not being able to find the files is that they can not have been backed up.  Otherwise, they should be in the folder.  I have to be honest.  I did several laps, but never made a backup of my files.  I always keep my personal data, backups of Quicken, photos, etc. on the external USB hard drives.  If the data are very important to me, I have it on at least two disks.

  • How to use the adapter from the wall with my Mac Pro laptop?

    How to use the adapter from the wall with my Mac Pro laptop?

    The AC wall connector is not compatible with the outlet on the MBP?  As the MBP charger will work from 100v to 240v, a transformer is necessary.  You need a converter that connects to the power outlet home and is compatible with your MBP.  You can buy the Apple travel kit:

    http://www.Apple.com/shop/product/MD837AM/A/Apple-world-travel-adapter-Kit

    Or you can use a single specific converter for the geographical area:

    http://www.Amazon.com/orei-grounded-universal-adapter-Singapore/DP/B004SCSV2U/re f = sr_1_4? ie = UTF8 & qid = 1460735377 & sr = 8-4 & keywords = us + in + uk + power + adapter

    (it is a UK USA example)

    Or you can get the converter that adapts the charger directly:

    http://www.Amazon.com/HIOTECH%C2%AE-extension-charger-connecting-specification/d p/B00MA48JZW/ref = sr_1_3? ie = UTF8 & qid = 1460735486 & sr = 8-3 & keywords = us + in + uk + power + ad aptor + apple + charger + cord

    (again, this is for a UK plug.)

    Ciao.

  • How to use the product with laptop Portege R150 recovery CD?

    How to use the recovery CD product with laptop Portege R150 of Formate and reinstall the operating system?

    Mobile recovery procedure Asian does not for me but may not be very different as on mobile phones produced in Europe or the United States.

    Start your laptop and press F12 to display the boot options
    Place the recovery disc into the optical disc drive
    In the start menu, choose the CD/DVD drive and press ENTER
    The procedure of the facilities is expected to begin
    Follow the menu on the screen

    I do not know what will be shown at this stage, but it is not complicated to install the original recovery image. If you have any other questions please let me know what happens when upgraders begins. What options are displayed?

  • How to use the recovery CD?

    Hello

    Ive lost the instructions to tell me how to use the recovery CD. I forgot, I need to press to access the disks when I reboot!

    Can anyone help please?
    St. Clare

    Hi clear, before using the recovery CD make you that all important data has been saved to the floppy or USB key because the procedure will erase the entire hard drive. The method for booting from a cΘdΘrom may vary according to the model number of your laptop, but it's something like hold the 'B' button for the Toshiba Startup logo. If this fails you can try to change the boot sequence or use the Toshiba from Windows or the BIOS configuration tool (ESC then F1 when prompted from a cold start) make CD-ROM the first device startup in the list.

    Richard S.

  • Satellite Pro A300D-131 - how to use the S-Video TV output

    How configure you output to a TV LCD TV S-Video output jack? I tried everything I can think but cannot make it work.

    Hello

    That s easy.
    You must use a 4-pin s-video cable to connect the TV to the laptop.
    Connect both devices, then turn on the laptop, then TV, use the FN + F5 key combination to switch to the external device (TV).

    PS: You have to choose the right channel of TV (s-video must be enabled)

    All that s

  • How to use the utility of recognition of face on Satellite L350D

    Hi all

    I am trying to understand how to use the utility on my laptop satellite L350D-131 face recognition but won't have any look.

    Can someone tell me how to use / start this feature please?

    It should come a manual or a tutorial how to use this tool. I'm not an expert in the field, because I saw this feature only on a laptop in the stores. But it is a security feature nice little addition to the fingerprint system.

  • I'm not clear how to use the recovery CD

    I added all the space using my HDD is it comes about 12 GB, I have 27.9 GB of disk space, but my drive has only 1.80 left disk space. I made clear to solve this problem. Basket is empty, I ran disk cleanup.

    A computer expert suggested that Windows might have become confused and cannot recognize what place I save, it might be because I ran a program called Cyberscrub often. His solution is to reload Windows XP home. My laptop came with recovery discs, everything else is already loaded. I have so much I don't want to lose on my laptop. If I use the recovery discs, I will lose everything on my computer, am I better off buying Windows XP home and re-load, in which case I will not lose my job?

    Also I am not clear how to use the recovery discs, I can't find instructions on what you are doing.
    The only person who could help me went to travel and not reachable.
    Any help greatly appreciated
    Lorraine Hart

    It of a very simple to recover the laptop.
    Just boot from the recovery CD and follow the instructions on-screen ;)

    I put t know what version recovery CD you have, but the older one provides the standard and expert mode. In expert mode, you can choose you partition where the OS is to be installed.
    So in this case only the selected partition will be formatted!

    But have you checked the size of the HARD disk in disk management?
    Simply click on the my icon my computer and choose manage.

    Of course, you could remove the internal HARD disk and it could connect to the external USB HDD controller. Then, connect the drive HARD to the second PC and you record data on another HARD drive.

  • Satellite M300 - how to use the recovery disk

    Hello world

    I was wondering how to use the 2 recovery discs that I burned recently if I wanted to fix my USB ports (as seen in my Toshiba M300 - wire to USB ports)

    Any suggestions?

    Hello

    You can use the only recovery disk to reinstall the whole OS!
    This means that the use of the recovery disk will format the whole HARD drive and will set the laptop back to factory settings!

    If you want to use the recovery disk and then insert it into the ODD and the start-up of this disc.
    Then the installation of the OS should move forward and you should follow the instructions on the screen.

    All that s

  • How to use the adapter wireless Satellite C660D?

    Hello world!

    Crazy us looking for the adapter wireless Satellite C660D-164... is there an integrated? or do I have to buy an external? Can not know how to set up a wi - fi and bluetooth connection. The manual is not descriptive.

    Installed all the drivers form the site.

    Pleas help ASAP.

    As far as I know all the portable toshiba have too much especially the bluetooth and WIRELESS network card.
    Use of WLAN is very simply. Thing the most important ist wireless network adapter must be installed and activated correctly.

    In the document s user manuals, you can find good description how to use the WLAN.

    The question is: do you use your laptop with the original operating system preinstalled that you got with it or you use own preloaded?

  • Satellite U300 - how to use the recovery disk?

    I inserted the recovery disc 1 and then restarted my computer, but nothing happened.
    I really need to fix my cause cell it's time to review!

    Does anyone know how to use the recovery disk or affecting function press when the laptop starts to use the programmed recovery?

    Thank you!

    Hello!

    If you have inserted the recovery disc you must only start her everything that s!

    I m not sure but I think you can go into the advanced boot menu if you press F12. Alternative change you the boot priority in the BIOS. You can access BIOS by pressing F2.

    Good bye

  • Pavilion dm4-3090se: how to use the SSD after restoration of the system of Windows backup disks?

    Hello

    After a lot of work, I finally could restore my OS using Windows backup disks that I created a few years back. (The OS has been corrupted when the power has been accidentally deleted from the system and the battery was dead)

    Restoring backup widows put everything on 444 GB C drive.  Nothing I put on the SSD drive d:-20 GB and there is nothing in the tools of HP E: drive - 4 GB

    How can I make use of the SSD drive to help speed up the system?  I see the system starts and runs more slowly now.  I'm ready to blow the current operating system and re-run the Windows backup utility.  But I need to know how to use the SSD during the restoration.

    Any help is appreciated.

    Thank you

    Bob

    Hey @llebrez,

    Welcome to the Forums of HP Support! This is a great place to find solutions and help our community!

    I understand that you have some information about using the SSD in your HP Pavilion dm4 Beats Edition Entertainment Notebook. I'd be happy to help you with that.

    The SSD in your laptop is used for a technology called Intel Smart Response. Intel Smart Response uses the SSD as a type of Cache smart to help load the items faster. The reason why that is not used currently is because the restoration of the system is not designed to use the SSD for intelligent caching and is not able to establish that on its own.

    If you want to configure Intelligent caching on your laptop, you can follow this guide provided by overclock.net: how: implement the Intel Smart Response Technology (SSD caching)

    I hope this helps. If you have more questions that I'm able to answer for you, please do not hesitate to ask.

    Please hold me.

    By pressing the Thumbs Up button below, you can always say thank you!

    See you soon.

Maybe you are looking for