HP Envy 14-1200 Prod # XQ103AV: "we could not create a new partition or locate an existing one. See the Setup log file.

Similar Questions

• Installation of Hyper-V T420 2012: "we could not create a new partition or locate an existing one.

  Try to install Hyper-V (hypervisor bare metal, not a role) on T420 with PERC H710, receive an error message:

  "We could not create a new partition or locate an existing one. For more information, see the Setup logs files. »

  (Don't even have the slightest idea where search "Files Setup logs" - do not think that the Setup program has a place for them to write).

  What I'm doing wrong here?

  The waiter came with a RAID1 mirror previously partitioned on H710 (the rest of the readers - still not configured); Double SD cards with the hypervisor, VMWare (to be erased or left alone).

  Thanks in advance for any ideas.

  After you disable the internal SD card slot, the installation ends without incident.

• Could not create a new partition or locate an existing journal of one.see configuration file

  Separated from this thread.

  I get the same error 'could not create a new partition or locate an existing configuration one.see file log', but I install windows server 2012 R2, datacenter edition. I tried the steps above and it has not changed anything. Help please!

  Salvation of demonstration,

  We have a dedicated team working on Windows Server 2012. I suggest you ask your question in the below link:

  https://social.technet.Microsoft.com/forums/en-us/home

  Hope this information is useful.

  Thank you.

• Error: "could not create a new partition or locate a" when installing Windows via Boot Camp 10

  This error occurs on my 2012 15-inch MacBook Pro. I have 2 hard drives. One dedicated to OSX and one for Windows. This is my first install bootcamp. I let bootcamp create partitions, but to the partition/disk screen hard to choose, I get a message saying: "we could not create a new partition or locate a.. The partition has been formatted to NTFS. I tried later in this guide community post here: error: "we could not create a new partition or locate and existing" install Windows via Bootcamp 8.1, but no luck. I even tried to delete the partitions and create a partition empty for windows so it can create and format on its own and start using EFI. At this point, windows begins to install it and restart, but it fails during the part material recording and restarts. Then when it starts again I get a message that the installation has failed.

  Here's some output terminal which can help you to (I) hope.

  Blakes-MBP:~ blakeleeper$ diskutil list
  /dev/disk0 (internal, physical):
     #:                       TYPE NAME                    SIZE       IDENTIFIER
     0:      GUID_partition_scheme                        *500.1 GB   disk0
     1:                        EFI EFI                     209.7 MB   disk0s1
     2:          Apple_CoreStorage Macintosh HD            499.2 GB   disk0s2
     3:                 Apple_Boot Recovery HD             650.0 MB   disk0s3
  /dev/disk1 (internal, physical):
     #:                       TYPE NAME                    SIZE       IDENTIFIER
     0:      GUID_partition_scheme                        *320.1 GB   disk1
     1:                        EFI EFI                     209.7 MB   disk1s1
     2:       Microsoft Basic Data                         319.9 GB   disk1s2
  /dev/disk2 (internal, virtual):
     #:                       TYPE NAME                    SIZE       IDENTIFIER
     0:                  Apple_HFS Macintosh HD           +498.9 GB   disk2
                                   Logical Volume on disk0s2
                                   27D631AE-27C5-4E4B-98BC-92CE944ED60B
                                   Unlocked Encrypted
  /dev/disk3 (external, physical):
     #:                       TYPE NAME                    SIZE       IDENTIFIER
     0:     FDisk_partition_scheme                        *16.0 GB    disk3
     1:                 DOS_FAT_32 WININSTALL              16.0 GB    disk3s1
  Blakes-MBP:~ blakeleeper$
  

  You must disconnect the internal bus 500 GB SATA drive and use a flashdrive USB2 for OS X from startup. The 320 GB designated drive must be in the main Bay of the Mac. Once Windows is installed, reconnect your 500 GB drive in the Optibay (if you this road main Bay) will be Windows blue screen in most cases.

• Setup could not create a new partition system

  Ok.  I just built a new rig.  ASUS P55 intel chipset mobo.  I have two WD Caviar Black hard drives and a RAID-1 array.

  I installed my OEM WIN-7-64 operating system several times.  Mostly because my WUSB54GC Linksys adapter wireless crashes my OS WIN because of a compatibility problem.

  Long story short: the last time my OS crashed he would not be stopped, kept grinding and grinding so I stopped it "hard."  Then when I tried to restart it kept a black window stall without launching.  So I decided to start over with a clean install.

  Big mistake!

  When I got to the place where you want to install? I had onlyl only one possibility, I created a RAID-1 array with 1 TB WD caviar drives two of the screen.  Then, I started to FORMAT it the disc for the drive I want to install WIN 7-64 on.  That was the big mistake.  Previously, I was able to install WIN 7 several times, but after formatting the HARD drive, I received the message "Setup could not create a new partition system.  I can't find the logs and I tried all of the suggestions that I have found here and does not.

  I have an ASUS P55-Deluxe mobo with two 1 to WD Caviar black HDs in a matrix RAID-1.

  I tried to reinstall WIN 7, with the HDD BIOS on IDE.  It worked once in what concerns the installation of the OS, but whenever I try to recreate the RAID array, I get the bloody message "Setup could not create a new partition system!

  I tried using partition of drive on BACK in but nothing works.

  Of course, here, someone has the same problem and has a solution.

  Help, please!

  Hi Steve,.

  On another forum, I read to remove the battery from the motherboard and wait 10 minutes before turning.  Not only did it clears the CMOS memory, but "remains".  After that, I was able to partition my RAID-1 disk, format the partition, load my drivers and install WIN 7.

  Thanks for the quick response!

• Setup could not create a new partition or system to locate a system partition.

  Today, I decided to re - install windows 7 to make it was once again, after saving all necessary files on my edge 1 TB hard drive restartrd windows with the retail CD in the CD drive. I pressed F12 and chose to start with the CD rom, now after several minutes while the CD was put into service, I informed all language settings, keyboard and time and press Next. Then clicked install now.
  ...
  ...
  About 10 minutes later, the next set of options showed, Normal install and custom install. I clicked customized. I then progressed to formate the hard drive and then click to select and then pressed...
  He been said now, "Setup could not create a new partition system or locate an existing partition in the system. So I tried to fix this by removing the primary hard drive and the other disappeared two (excluding the 1 to one). So I then clicked new on this 150G hard drive and then clicked on, it now says the main hard drive. I then clicked Next. ..
  The same thing, "wa unable to create a new partition system or locate an existing partition of the installation system. now I'm stressed and I really want to fix this today, so I came to the internet.

  Please can someone help me?
  -Sent from my iPhone.

  Disconnect the SATA cables to all your drives except the drive hard that you plan to install Windows on and the DVD player. Also unplug all devices except for the keyboard and mouse enternal.

  Then, enter the BIOS and configure the DVD drive as the first boot device.

  Now try the reinstall.

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• Cannot install Windows 7 error USB "Setup could not create a new partition system.

  Windows 7 install gets o Acer Aspire 5100 hard (perhaps by EzBack Pro II)

  So the problem is that I want to install windows 7 (from USB, no more details coming soon), but it gives me the error "Setup could not create a new partitiojn system or locate a system partition. See thwesetup for more information log files".

  I flashed the bios because caouldn can't EzBackPro II freaking be uninstalled on vista.

  I formatted all partitions and have now 1 x 150 GB partition (still the partition OEM.. angyr I because recovery tools did not work ~. ~)

  now I want to install windows 7 and it does not just ;/

  any help? I hope that I destroy my laptop ;/

  Hi Grasmanek,

  You can try to dollow steps and check if it helps you to difficulty of installation of Windows 7 from a USB.

  (A) have no USB stick plugged in when the computer starts.

  (B) in the configuration page that says that you can load other drivers, insert the USB key, then click on the link and load drivers.

  (C) disconnect the USB.

  (D) to continue with the installation and check if it ends well.

   

  Access the links below and make sure you follow the steps mentioned in the items to install Windows 7 from a USB key.

  http://TechNet.Microsoft.com/en-us/magazine/dd535816.aspx

  http://Windows.Microsoft.com/en-us/Windows7/installing-Windows-7-on-a-NetBook

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-from-a-Windows-7-installation-disc-or-USB-flash-drive

  I hope this helps. Let us know the result.

  Thank you and best regards,

   

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Install Windows 7 on Dell laptop, error "Setup could not create a new partition system or locate an existing partition.

  I had Windows Vista ultimate on my Dell Studio laptop which consisted of 3 partitions (OS, recovery and OME).

  In order to complete a clean install, I deleted all partitions and create a new 1 and formatted it, but I am informed that the installation was unable to create a new partition system or locate an existing partition.

  I tried in IDE and ACHI, but neither enable Sir to go beyond that. I am booting from the CD with Windows 7.  If someone is able to help, they explain in layman's terms, as I am a relative novice.

  Thank you

  As the drive was provided by Dell, you need to talk with them.

  The disc could be waiting to see the things that you have deleted.

  It can also be a type of completely different facility than the normal installation of Microsoft discs.

  You would have more than likely been OK if you would leave the formatting alone and partitoning.

• Setup could not create a new partition, new z510 non-OS and windows 7

  Hello, I have a huge problem with windows install. Clean all the partition using windows install to create two partitions: 100 GB and GB 890. When I try to install windows I see:

  Setup was unable to create a new partition or system to locate a system partition. See logs of installation for more information"

  

  I put:

  Configuration: Controller-> Compatible Sata Mode

  Start mode: Legacy Supprt

  Boot priority: first Legacy

  Need help, help me.

  SOLVED... I tried to install the USB drive... there couse a problem.

• [Solved] Help! Setup could not create a new partition system or locate an existing partition.

  I get this error when I install windows 7 from USB.

  Help would be greatly appreciated.

  I used a dvd instead, and it works now. Thanks for your help.

• We get an error "could not create a new partition or find existing. "For more information, see the Setup log file" error message "while trying to install Windows 8

  * Original title: 8 victory moved - Error Message: failed to create new partition...

  I have Win XP on my Dell Dimension 5150, which is the dual boot with Linux Mint 12 Lisa and this is my favorite of the bunch.

  I bought the DVD of 8 Pro Windows by an Australian retailer.

  Win XP is on a 39 GB partition with other application files. I had to delete several files to get the free space necessary to WIN 8 and finally finished by formatting the partition and passes for a COMPLETE new installation.

  Unfortunately, I now get the "failed to create new partition or find existing. For more information, see the Setup log file"error message. I can't find a Setup log file that I do a boot from the DVD.

  I tried to delete all external drives and other USB devices, including my Modem but my Wired USB keyboard/mouse.

  Two internal HARD drives are as follows:
  Disk 0 Partition 1-110 GB - system (LINUX)
  Disk 0 Partition 2 - 3.5 GB - logical

  Disk 1 Partition 1 - 47 MB - OEM (reserved) [DellUtility]
  Disc 1 2:Win - 39.1 GB - System Partition
  1 3 disk partition: DATA - 39,1 GB - logical
  Disk partition 1 4:OfficeProgs - 19.5 GB - logical
  Partition on drive 1 logical - 39.1 GB - 5:PROJECTS
  etc to score 8 with 9 MB of unallocated space.

  I have tried both 64 and 32 discs with the same result.

  As I have now is no longer no matter what Windows on my computer, what's the next step? If any ;-)

  Hello

  I solved the problem. It seems that you can not install on a secondary partition with in an earlier version of windows. You must restart the computer and run the installation from a dvd or other media.  Once you get the installation running you should be able to install on another partition without any problems.

  Nice day

• We could not verify your address. We could not pair your zip code with your state. Please see the bulletin.

  How to solve this "we couldn't verify your address. We could not pair your zip code with your state. Please review. » ?

  Well, the obvious answer is to make sure that the zip code is valid for the State you entered.

• Problem with netflix Silverlight Error Message ID: 1622, the Setup log file could not be written. Verify that the Temp folder exists and that you can write to it.

  Original title: Netflix 8010-but mistake the Inprivate browsing is disabled

  OK, I got some kind of virus this kind of thing where it was like a fake antivirus, fortunately I knew and got rid of him and everything seems to work fine except that whenever I try to watch something on netflix, I get this error. He said essentially that inprivate browsing is turned on and that it cannot play the video. Then I tried to disable Inprivate more through the registry. However it still gives me the error.

  After that, I found something that said it could be silver light. Now I uninstalled light silver and restarted, but it won't let me reinstall it. He tries and tells me "unable to install silverlight" if I click it takes me to http://www.microsoft.com/getsilverlight/resources/help.aspx?errorID=1622more information.

  So now I'm still pretty much where I started. IM thinking responsible Foing to BestBuy and geeksquad tell later if I can't get this figured out. Thanks in advance.

  Edit: I forgot to say that I tried to uninstall IE9, but it tells me there is an error uninstalling, so I downloaded firefox and it shows me the same error of netflix.

  Hello
  Try these two links.
  The first is a forum on the same issue. The second is the forum for silverlight:
  http://forums.Silverlight.NET/p/182263/412872.aspx

  http://forums.Silverlight.NET/13.aspx
  Eddie b.

• Setup could not create a new system partition or locate an existing system partition

  After the removal of ubuntu, I decided to reinstall windows 7. To my surprise even after formatting the drive to NTFS, I get the following error when you try to install, "Setup was unable to create a new partition system or locate an existing partition in the system."

  I would appreciate it if explain you how to fix this, rather than post links.

  Use the Creation Wizard to Partition (free version): http://www.partitionwizard.com/free-partition-manager.html

  First create a bootable CD: http://www.partitionwizard.com/partition-wizard-bootable-cd.html

  Boot from the CD and Partition Wizard to delete all existing partitions and rebuild the Master Boot Record (MBR).

  Then using partition Wizard create a 350 MB NTFS partition, mark it as a 'System' and 'active '.

  Then, create a partition for Windows 7.

  Boot from the Windows 7 installation media, and when asked where you want to install Windows select the partition that you created for Windows using the Assistant Creation of Partition.

  J W Stuart: http://www.pagestart.com

• Windows Update will not install - Windows could not search for new updates to Code 8007051 A

  original title: impossible to install iTunes error HRESULT:0x8007051A and Windows Update doesn't work Windows could not search for new updates to Code 8007051 A

  Am running Vista 32 bit OS and trying to install iTunes but still get the following error;

  ' Microsoft.VC80.CRT.version = "8.0.50727.4053".Guy = "win32".publicKeyToken

  "="1fc8b3b9a1e18e3b".processorArchitecture ="x 86" also HRESULT:0x8007051A

  Some research has indicated that it was due to a problem of update?

  Then tried checking updates (Windows update), who does not ("" Windows could not search for new updates - errors found Code 8007051 A ' ")

  The "get help" link was as useless as an ashtray on a motorbike.

  Any help would be greatly appreciated

  Hi Discopossum,

   

  How long have you encountered this problem?

  Method 1: Run the fixit available in the links below and check if that makes a difference-Worth to try
  Difficulty of broken desktop shortcuts and common system maintenance tasks

  Note: FixIt would attempt to recover bad sectors on the hard disk, in the course of this process there are chances of DATA loss from that particular area.

  Method 2: Try to install the program as an administrator do a right click on the program installation files and select run as administrator, click on continue if you are prompted to confirm.

  Method 3:  Clean boot the computer and then try to install ITunes

  Follow step 1 in the link below,
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.

  Method 4:  Run the fixit available in the article below to reset the Windows Update components

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base.
  How to back up and restore the registry in Windows

  If problems with iTunes didn't exist yet, contact the Apple Support
  http://www.Apple.com/support/iTunes/