HP ENVY 14-2000 CTO - Renesas USB 3.0 Host controller 'start of cannont device (Code 10)"

Similar Questions

• HP ENVY 14-2000 CTO beats Ed: how to install Mac os on my pc

  How to install Mac os el capitan on my pc

  HP ENVY 14-2000 CTO Beats Edition Notebook PC

  running window 10

  BIOS version f.0f

  64 bit

  CPU intel hd 3000

  8 GB ram

  no legacy in bios option support

  Hello

  I see that your computer should be a model from 2011. I could be wrong but HP computers once 2012 come with UEFI - I really don't know, but that's what I found on the Internet.

  If she says legacy, maybe it's just the BIOS that has no extension UEFI, or it coul be your BIOS/UEFI boot mode is set to Legacy mode

  Unified Extensible Firmware Interface (UEFI) is just the firmware code to a chip on the motherboard that provides additional functionality beyond the input/output system BIOS (Basic). UEFI is a way of doing things with your computer before loading the operating system. For example, UEFI can provide menus very graphics and information on a computer and a diagnostic system based on a computer and tablet. UEFI works with the BIOS to initialize the hardware before handing over control of the hardware of the operating system. UEFI can also load and display software storage devices to provide even more features, such as more detailed system information and extensive hardware diagnostics. More information:

  > http://support.hp.com/us-en/document/c03801890

  > http://support.hp.com/us-en/document/c04784866

  If your computer came with Windows 7 preinstalled originally, most likely your computer lacks UEFI because computers that came with 8 preinstalled Win and were supposed to be win 8 certified had UEFI + active SecureBoot.

  Regarding the original question, Apple Mac OS is only officially taken supported devices and hardware from Apple.

• Recurring question Renesas Electronics USB 3.0 Host Controller

  Hello

  I get this question contextual all a few days/weeks/months and she has been driving me crazy, but I think I have narrowed down and would like tips are possible please.

  Question:

  USB 3.0 Host Controller error Code 10

  USB 3.0 ports front and back go dead.

  Cause:

  I don't know at all, I feel that perhaps it is TuneUp Utilities 2013/14 or maybe my smart phone Samsung Galaxy S3.

  Difficulty:

  Uninstall/remove up to present drivers, by restarting and installing fresh drivers do not work. He used also but the last 2-3 times, I couldn't get the error to go away as a result of this process.

  I talked to a technician Support of Dell by phone and by working together, we found to be a BIOS problem, since a full format of the PC still had the error when he brought upward once again, leaving only the hardware itself (USB 3.0 ports) or BIOS.

  Bringing F2 menu and make a F9 reset by default a F10 save and exit solves this problem, every time.

  So what is a BIOS issue or a compatibility issue?

  I know how to fix it temporarily, but I don't know the cause.

  Data sheet:

  Alienware Aurora R4

  3970 X 6 @ 3.5 extreme core I7 (turbo boost 4.3)

  NVIDIA GeForce GTX 690

  Windows 7 Ultimate 64 bit

  Internet Explore 10

  32 RAM

  Liquid cooled

  3 TB Seagate hard drive

  BIOS A07

  If you would like more information, please let me know.

  I have no discharge reports that the PC did not yet have a BSOD, but this is a replacement PC after the last (same PC and specs) had exactly the same problem and basically could not be fixed by a Dell technician.

  OK, that sounds good.

  What I might suggest at this stage is to put the service 'Windows Driver Foundation - User-mode Driver Framework' to 'auto' as this can help with any problem of detection:

  Start > type services.msc in the box "search programs and files", then press "Enter".

  In the right window to scroll down to the "Windows Driver Foundation - User-mode Driver Framework" service and double-click it and set the "Startup type" to "Automatic" > OK

  Then, restart the computer.

  Then, if Renesas USB 3.0 controller number happen can you create and provide the .evtx, and nfo files to the exact time.

• Where can I get AMD USB 3.0 Host Controller for windows 7 (32 bit) of

  Original title: ask questions about Windows 7 usb

  do someone know where do I go to download amd usb 3.0 for windows 7 32 bit host controller, because everything I downloaded it isn't on the Manager of catalyst for a lot of software on the catalyst instalation, host controller usb 3.0 in my google search.

  Thank you people

  Hello

  Thanks for posting your query in Microsoft Community.

  • What is the brand and model of the computer?

  You should be able to download AMD USB 3.0 Host Controller for Windows 7 (32 bit) of the support of the computer manufacturer Web site.

  For example: If you have Lenovo PC, you can check: AMD USB 3.0 hub and host driver controller for Windows 7 (32 bit, 64 bit)

  Similarly, you can type www.support. .com and search for the driver.

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

• USB keyboard & mouse error "Windows cannot start this hardware device - code 19.

  Original title - USB keyboard & mice problem

  Hello

  I'm under 64-bit Windows 8.

  Problem: Keyboard Logitech wireless & mouse (S520) does not work.

  1 week ago that I tried my HARD drive on different USB ports on my PC. I disconnected the keyboard and mouse wireless receiver and reconnected. Since then he has stopped working.

  In Device Manager, it has a typical yellow marks against HID keyboard and mouse. I tried to uninstall and reinstall, off and on, makes no difference.

  When I go into the properties by right-clicking, the status is 'Windows cannot start this hardware device Code 19'.

  I tried Googling this error but I found that the solution is only for CD/DVD problems.

  I uninstalled USB Root Hub that is not made any change in the problem.

  Have restarted severl times and power disconnected from the PC and thus reloaded.

  I am currently my PC from iPad using the app Splashtop.

  I really hope that someone can help me.

  I've restored my windows from 16 April that solved the problem. However, I learned a lot about the registry keys and all.

  Thank you for taking the time from your busy schadule and answer my stupid questions.

  Thank you.

• Renesas USB3.0 Host Controller disappears from the Device Manager

  I recently installed a USB3.0 PCI-E card in my computer (Renesas uPD720200 USB3). The problem I have is that the host controller keeps endangered since the Device Manager, and then I can't use the USB ports. I use Windows 7 64-bit. It disappears usually when I stopped for an evening and then start up the next day and he disappeared. If I just have it reboot normally disappears, but sometimes remains. If I leave the computer and let it go to sleep, when I wake up, the host controller has disappeared. I tried some troubleshooting steps are based on research on google and the answers to this question: http://answers.microsoft.com/en-us/windows/forum/windows_7-hardware/renesas-usb-30-driver-continuous-uninstalls-from/ac6b1137-1778-e011-8dfc-68b599b31bf5?auth=1&page=2

  If I uninstall all controllers USB host and reboot, the host controller reappears, but only temporarily. The next time I start up it went again and I have to repeat the process (uninstall all host controllers and restart).
  Once or twice I could make it reappear after running the utility of hardware troubleshooting (Panel-> Troubleshooting-> Hardware and Sound-> configure a device), but it is not reliable and I'm usually better off just uninstall all host controllers and reboot. Regardless of if it works, the store always gives me the message "hardware changes may not have been detected", and when I look at the details it says "configured to never install drivers from Windows Update. " There is no question."
  I've updated the driver. I downloaded the Version 2.1.28.1 of the Intel Download Center (http://downloadcenter.intel.com/confirm.aspx?httpDown=http://downloadmirror.intel.com/19880/eng/USB3.0_allOS_2.1.28.1_PV.exe&lang=eng&Dwnldid=19880). It seemed to install fine, but Device Manager shows the driver version is 2.1.28.0. Repeat the installation produces the same result.
  I updated the Firmware (http://www.station-drivers.com/page/renesas.htm) and that seems to work very well, but didn't had no bearing on my problem.
  I would be really grateful for any help or suggestion.

  Hello

  Adding to the valuable suggestion of Josh-H, I also suggest you to run the FIXIT and check.

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

• USB - if hci host controller

  Hi I have a hp dv7 envy and I'm getting a massage of the error of my computer for a problem with my usb - if usb host controller hci key.  When I try the fix may not make the fix. It is a big problem and how can I fix?

  Hello

  Try to install the driver, WIDI, Intel online - see the following link.  Note:  If you have the switchable graphics Intel/AMD, it is sometimes necessary to switch to the Intel gpu before you install the driver of widi.

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&DwnldID=22016&ProdId=3227&lang=eng

  Kind regards

  DP - K

• is it possible to install USB HIGH SPEED HOST CONTROLLER DRIVER to ONE OF MY USB PORTS to RUN MY CAM AND webcam

  I have Dell Optiplex gx 150 intel pentium 111. Windows xp pro service pack 3. I get a baloon saying there is no port high flow installed on my pc, now I need material or the right drivers to make it work properly. ICAN get my cam digital to work, but I get the ball, saying that I have to install the drivers of controllers host high speed to do my camera to work faster. Now the webcam does not light but I do not get a pic and it gets the same ball to get a host controller driver high speed to make it work right. So I need a piece of hardware or just the drivers on my very old but the pc work great. Please try to answer this question in advance.

  Hello

  You can update the drivers for this chipset. Contact the manufacturer of the computer and check.
  Also, check the link below:
  Support USB 2.0 in Windows XP: finally high speed
  http://www.Microsoft.com/windowsxp/using/networking/learnmore/jones_02august05.mspx

  I hope this helps.

• Standard enhanced PCI to USB Host Controller & USB OpenHCD Standard host controller drivers

  Hello

  Improved my Standard PCI to USB Host Controllers & Standard OpenHCD USB host controller drivers are no longer works. My USB ports have stopped working completely.

  I tried to uninstall, reboot, reinstall, but Windows cannot reinstall the drivers itself. I get a code 19 for each of them. "Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19) »

  I did not anything out of the ordinary except for an update of the computer, but I tried the system restore and it still does not fix my problem. I suggested either a new reinstall of Windows or to "press F11 on startup to restore my computer to factory settings.

  I tried deactivating and reactivating. That did not work. The only thing I have not tried also the factory reset setting is reinstall my chipset, but I don't know how or what chipset I have, I just know it's AMD and ATI.

  My computer is a HP Compaq Presario CQ61-420US with 3 GB of RAM, AMD Athlon II Dual Core processor, I have Windows 7 Home Premum 64-bit.

  I have tried everything that I could, even went in safe mode, uninstall and re-install my drivers, but it didn't work. I really need to get this problem solved, I really need my USB ports and I don't know what to do.

  Try the following:

  Start by creating a System Restore Point.

  Double click on the UpperFilters and remove usbfilter > OK

  Then, restart the computer.

  The reference to the usbfilter is probably not valid and removing wil restore the default UpperFilters which is empty.

• Win XP - Renesas uPD720201 USB 3.0 Host Controller - does not not :(

  Hi all

  I need help because I have problems getting my new usb 3.0 PCIe card to work.

  Basically, I myself had this USB 3.0 PCIe card (so can finally have the best on-the-go transfer speeds).

  It establishes he needs a "slot PCI-Express must be version 2.0 or later" to get the USB 3 speed of 5 Gbps; otherwise version 1 will be limited to 2.5 GB/s.

  I have the Asus P6T motherboard that has:

  2 x PCIe 2.0 x 16 (dual x 16, blue)
  1 x PCIe 2.0 x 16 (x 4, white mode)
  1 x PCIe x 1
  2 x PCI

  This image will help you.

  My understanding of this is that I have a small white that is version 1 (directly under the first blue PCI - E version 2), where my graphics card is installed. The following PCIe which is version 2 is the following under small white (big one blue) by another white to x 4. I have installed PCIe card in the "PCIe 2.0 x 16 (x 4, white mode). I've also attached the required SATA power cable. I can't install the USB connector before (19 pins) as my current case uses USB 2.0. Fix the case it has front usb 3.0 in the future.

  For after this forum, I installed the card properly. Is this correct?

  I think it's okay, because the red light of PCIe card seems lit inside my case AND (b) because I can see the USB 3.0 controller host listed in the Device Manager.

  However, when I connect my usb 3.0 flash memory stick scandisk, it's the blue light flashes but in Windows XP > My Compputer device does not appear?

  I try in my USB 2.0 and it is formatted in FAT32 and also works perfectly fine, so I know it isn't my USB pen.

  I use the 3.0.23.0 driver version

  I don't know about the firmware.

  Thanks in advance for any help on this.

  Hi all

  To inform, I got it to work. Had to update the firmware, but could only do by installing the PCIe card in the first small PCIe slot.

  Here is a link to the firmware update (only worked in Internet Explorer for me).

  You can also download the driver to date since there too.

  After the firmware update, I uninstalled the driver (using the Add/Remove Programs entry). Shut down the PC. Moved the PCIe card in the greatest location PCIe which is version 2.

  Thanks for the other tips if ever less.

• Intel 5 series chipset family improved usb - 3B 34 host controller /3400series

  a new laptop from asus k52f says usb need trouble shooting, but used new drivers and download

  5 series /3400chipset 2 b 34

  Hello

  I suggest you try check and troubleshooting hardware and devices runnming if this can help:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  It will be useful.

• expandable usb 3.0 host controller driver not install

  I just installed windows 7 x 64 on my inspiron 15 3542 and I cannot get the driver usb 3 to install I get this error message "the computer does not meet the minimum requirements for installing the software.

  

  blugrana

  I just installed windows 7 x 64 on my inspiron 15 3542 and I cannot get the driver usb 3 to install I get this error message "the computer does not meet the minimum requirements for installing the software.

  

  Hello

  We suggest that you install the drivers in this order:

  Chipset: http://downloads.dell.com/FOLDER02013085M/1/Chipset_Driver_DKG7G_WN_9.4.0.1026_A00.EXE

  Driver IMEI: http://downloads.dell.com/FOLDER02007773M/13/iMEI_Driver_Intel_A00_W732W764W8.164-SETUP_ZPE.exe

  USB 3.0 driver: http://downloads.dell.com/FOLDER02009821M/11/USB3_Driver_Intel_A00_WIN732WIN764-SETUP_ZPE.exe

  Touchpad drivers: http://downloads.dell.com/FOLDER02508210M/1/Input_Driver_33DCD_WN_18.1.16_A01.EXE

  Audio - http://downloads.dell.com/FOLDER02011713M/12/Audio_Driver_Realtek_A00_W732W764W8.164-SETUP_ZPE.exe

  Setting quick app: http://downloads.dell.com/FOLDER02009539M/13/Quickset_Application_Dell_A00_W732W764W8.164-SETUP_ZPE.exe

  Sure that your system should work fine... Repost once it has been... Thank you.

• usb 3.0 host controller driver missing HP Pavilion g6-2290sx

  
  

  Hello

  Try the driver on this link.

  FTP://ftp.HP.com/pub/SoftPaq/sp55501-56000/sp55975.exe

  Kind regards

  DP - K

• USB - IF XHCI HOST CONTROLLER HAS A DRIVER PROBLEM

  JUST BROUGHT A LAPTOP TOSHIBA AND ALREADY HER SHOWING ME A PROBLEM

  WITH A DRIVER. HOW AND WHERE CAN I REINSTALL THIS DRIVER?

  Hello

  Try this and let us know if you are still having a problem.

  Use this link and run the Intel Driver Update utility

  B Eddie

• HP ENVY 17 t - 2000 CTO 3D: Beat audio error! HP ENVY 17 t-2000 technical 3D Director

  Hi, last week my beat audio leave work. The Committee has also disappeared. I tried to reinstall the driver IDT since driver's Web site (it is detect my laptop perfectly) after reinstall audio IDM some time the noise disappeared.

  I download the audio drivers here using auto-detection:

  http://support.HP.com/us-en/drivers/selfservice/HP-envy-17-2000-3D-Edition-Notebook-PC-series/504623...

  Please help me... It's a little frustrating.

  The driver I have download is: driver Audio IDT high definition (HD) - sp52562.exe

  Thanks in advance

  Hello

  Try the following.

  Download IDT Audio Installer on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp52501-53000/sp52562.exe

  One time finished, open windows control panel, open Device Manager and open sound, video and game controllers.  Right click on the IDT device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

  When you are finished, download and reinstall the Chipset driver at the following link.

  http://ftp.HP.com/pub/SoftPaq/sp50501-51000/sp50557.exe

  When the reinstallation of Chipset is finished, stop the laptop.

  Disconnect the power adapter.  Press and hold both the power button / stop and pulse for 15 seconds, then release.

  Plug the power adapter.

  Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu.  Press f9 to load the default values (sometimes it is f5, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

  Let Windows load fully, then open your download folder, right-click on the IDT Installer and select "Run as Administrator" to launch the installation.  When this has completed, restart the laptop.

  Kind regards

  DP - K