HP Envy 15 i7 window 8/8.1 - FAN never stop

Similar Questions

• Windows 8 update manual checker (never stop running).

  Original title: WINDOWS 8 MANUAL UPDATE CHECKER (never stop running).

  Hi guys, is couple days in my windows 8 pro 64-bit computer laptop, because I check the manual updates of the options

  the green line of the control is still ongoing, he never stops before and regularly

  so I can't stop the Dungeon of update running with the green line.

  What should I do?

  I try to disconnect from the internet I get an error message and stop by it's self.

  but seems not work too. Just keep continue running and running out with stop

  Thanks in advance, hope that someone got the idea.

  Dear Mr RajithR
  Thank you very much for your support. I use eset antivirus.
  but seems that I solved the problem already in this way

  I always check the side windows desktop update option.
  and as I said the audit of the green line never stop

  > then I select windows update in the 2nd menu of windows 8
  on the left side change configuration pc, so I'll find windows update on this side of the menu,
  Once I check the update (if the update do not, at all, and everything was normal)

  > I click on it.
  and Ive check the update normally up to don't stop telling me anything like normality.

  > then I'm back in the Office Update I click here, then I found everything was STOP FINALLY.
  so I recheck again to update in office and stop again with updates to find
  Everything works normally now. I guess I did, hope also works for others.

  If this will happen again I'll make your suggestions.

• Windows 7 Ultimate. Computer never stops when windows update is running.

  I recently got windows 7 ultimate system and with the exception of two questions im love it.

  The big one, is that, since at least two to three weeks every time the automatic windows update installs something windows closed, never stops.

  I think the updates are installing, windows just hangs after the update is complete. (history of update of windows said that they where successful)

  The screen will tell me its 1 installation of updates for a few minutes.

  then it will say that its closure, that she will never be.

  Hello
   
  First lets try resetting the components of Windows updates and check whether the problem is resolved.
   
  To reset the Windows Update components, you can follow the link provided below.
  
  http://support.Microsoft.com/default.aspx/KB/971058
   
  Thank you, and in what concerns:
  I. Suuresh Kumar-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows 8 endless start - points never stop turning

  windiws 8 endless start - points never stop turning

  Hello everyone, a week has passed since my pc (toshiba - Windows 8 enterprise) began to give me this strange problem: when I start the computer, the startup never goes after the windows logo screen and the rotation of the points. .. the computer starts only in Mode safe...
  I tried to start with "Enable Boot logging" and when I turned off and restarted the pc in safe mode, the ntbtlog.txt file contained a lot of "BOOTLOG_NOT_LOADED".

  I have attached the file here ntbtlog.txt

  Thank you for your help

  Hi Tommy,.

  We have dedicated support for enterprise customers. I would have you post your query in the TechNet forums to improve assistance in this regard.

  http://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w8itpro

  It will be useful.

• Envy 17 - j020us Windows 7 drivers missing

  Hello

  I just bought a HP Envy 17 - j020us today. It came stock with Windows 8 is installed and I have, for my own reasons, decided to install Windows 7 above. Long story short, the installation has worked, for the most part. The only problem was that I was missing some drivers. I searched and found http://h30434.www3.hp.com/t5/Notebook-Operating-Systems-and-Software/ENVY-17-j020us-windows-7-driver... which was very helpful. However, there's still about 3 pieces of material that is not installed, the drivers with the network controller. I have attached hardware IDS and compatible IDS is available upon request for any "missing" material below. Can someone help me find the drivers?

  Network controller - hardware ID:

  PCI\VEN_8086 & DEV_0887 & SUBSYS_40628086 & REV_C4

  PCI\VEN_8086 & DEV_0887 & SUBSYS_40628086

  PCI\VEN_8086 & DEV_0887 & CC_028000

  PCI\VEN_8086 & DEV_0887 & CC_0280

  Feature 'Unknown' - hardware ID:

  USB\VID_138A & PID_0050 & REV_0060

  USB\VID_138A & PID_0050

  Feature 'Unknown' - hardware ID:

  ACPI\INT33A0

  * INT33A0

  Any help would be appreciated. Thank you

  Hello

  Please try:

  1. network: http://ftp.hp.com/pub/softpaq/sp57501-58000/sp57976.exe

  2 validity sensor: ftp://15.217.49.73/pub/softpaq/sp45001-45500/sp45050.exe

  3 Please try: https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=20866

  Kind regards.

• my firefox closes when I close the window, but the process is not stopped since I got the update to firefox

  Since I upgraded to firefox 2 days ago, there a reboot problem. When I close the firefox window, it closes as it normally does, but whenever I try to restart firefox it shows the notification that firefox still works and I first need to stop the previous process before you can start a new one. Finally after I manually stop the firefox process it restarts again.

  What fixed it for me, but I am running v.15 because of other problems. I have to say I tried a hundred things and nothing works. I made the note never stop, even hours later, if I forgot to go to the Task Manager to end the process. It seems not important to know if I had extensions or modules running or not. I tried this before today. My graphics driver updated a couple of months. In any case, THANK YOU for this, finally something is going right.

• Windows 7 Home Premium 64 bit stops around the bottom/accidents

  I play on a whole new Alienware Aurora ALX Lord of the Rings Online (LOTRO) and Windows 7 crashes.  I never really get to see exactly what he says because he throws me the game, goes to a blue screen that says Windows has closed the program because he knew... There is a whole bunch of other text that I can't read before restarting the system.

  The game plays very well on Windows Vista, XPS 1530 had never do.  In simple terms suggestions are greatly appreciated :)

  Hi lp7p,

  Blue screens are usually a result of outdated hardware drivers. But with a PC game as Alienware Aurora ALX should be an exception.

  However you can try to update the drivers for the network adapters and display and check if it makes a difference.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Update drivers: recommended links

  http://Windows.Microsoft.com/en-us/Windows7/update-drivers-recommended-links

  There are a lot of issues with conflicts between the Lord of the rings online and Windows 7. It would be best to contact the manufacturer or by post in their forums, such that there should be more discussions on the issue.

  Access the link below for the Lord of the Rings Online forum.

  http://forums.lotro.com/

  Varun j: MICROSOFT SUPPORT
  Visit our Microsoft answers feedback Forum
  http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/ and tell us what you think

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Windows XP says it stops, but it never stops

  original title: SHUT DOWN PROBLEM

  WHEN SHUTTING DOWN WINDOWS XP SE MESSAGE WINDOWS STOPS BUT IT NEVER STOPS. ALL SOLUTIONS?

  Hi James,

  Have you made sure to install the latest service pack for Windows XP?
  "To resolve this problem obtain the latest service pack for Microsoft Windows XP.". For more information on how to do this, click on the number below to view the article in the Microsoft Knowledge Base:

  322389 (http://support.microsoft.com/kb/322389/) how to obtain the latest Windows XP service pack"
  -http://support.microsoft.com/kb/307274
  Let us know if that helps at all.

• Every 10 minutes, I get a popup window of Microsoft Windows error: Dell Support Center has stopped working

  Every 10 minutes, I get a popup window of Microsoft Windows error: Dell Support Center has stopped working. A problem caused the blocking of the program works correctly. Windows will close the program and notify you if a solution is available.

  I uninstalled Dell Support Center via the Control Panel, run the virus and malware scans installed a restore of a month before this problem point and continues.

  Hello

  Dell has their own Forums of Support for you to enquire about Dell software issues.

  http://en.community.Dell.com/support-forums/default.aspx

  See you soon.

• I'll have to turn my computer on and off for windows at startup and then it stops a lot

  I'll have to trun my computer on and off for window at startup and then it stops a lot

  Hello

  Is there an error message? If so, what would you say? If this isn't the case, then you probably have a stop initiated by the hardware to prevent overheating damage to the system. If this is the case, can help clear the vents and intake fans / exhaust so that clean the dust bunnies (desktop systems). Also make sure that the CPU cooler is not clogged and that all fans are working properly. With laptops, a cooling pad can help.

  Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

• Pavilion Elite HPE-180 t, windows 7 64 bit started to stop the sleep mode.

  Pavilion Elite HPE-180 t, windows 7 64 bit began to stop in the past few weeks.  It seems to happen from the sleep mode.  I leave the computer for more than 20 minutes, and when I come back, it is turned off.  When I start again, I have an error message and be able to start in safe mode.  I start in normal mode and I get an error "windows has recovered from an unexpected shutdown" without solution.  I also see an action center say error - consider sending additional information about a problem with the ATI display driver (graphics card is ATI Radeon HD5450 1 GB).  When I click for the solution, says that this solution could not be downloaded.  I've updated my drivers.  I haven't added a new hardware or software.

  Thanks HardBeatZ (HP).

  I did as you suggested and I had to uninstall several times because the device picked up previous ATI vs the generic drivers.  In any case it still stop with the blue screen of death when waking from sleep mode.   Then I went back and installed the latest graphics driver from the HP site for my system. I still had a few stops.

  Then I went through all my devices and checked for latest drivers.  All said that the best version is already installed.  Then I noticed that my HP bt500 bluetooth USB 2.0 adapter had only a driver available for windows 7 32 bit (I have installed 64-bit).  I used a keyboard and bluetooth mouse.   So I unplugged the adapter and have resorted to the USB keyboard and mouse and closures of blue screen stopped.  It seems that the network card was originally wake up from its sleep.  I also disabled the reactivation of LAN in the properties of the network adapter device.

• Windows 7 impossible to check updates, keep looking for updates and never stops.

  Original title: update Windows 7

  I recently got rid of a shit 10 windows and reinstalled windows 7 but I can't do updates. It keeps searching for updates and never stops. That is what it is?

  You could look at this and Yes, it has become current,

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-update/Windows-Update-remains-at-checking-for-updates/ff3c442e-79a6-40d3-AC35-29e130cebef1

• Windows 7 causes windows 2008 server mapping to the stop

  Network mapping with a windows 7-64 bit computer caused my server - Windows Server 2008 - Standard 32 bit stop, then restart.

  Any ideas?

  Hi Jim,.

  As Microsoft Answers is the support level of consumption-oriented, it is better to post your question in the Microsoft Technet Server forums:
  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer
   
   
  If you have other issues with the Windows operating system, please and we will be happy to help you.

• Canon S820Printer my printer was working fine with Windows 7 Home Edition, then it stopped, magenta and yellow print. Ink tanks are full.

  My printer was working fine with Windows 7 Home Edition, then it stopped, magenta and yellow print.  Ink tanks are full.  What bad past and how to fix it?

  If you are sure that the ink cartridges are full, then try to re-seats and cleaning the heads - http://kbsupport.cusa.canon.com/system/selfservice.controller?CONFIGURATION=1011&PARTITION_ID=1&secureFlag=false&TIMEZONE_OFFSET=&CMD=VIEW_ARTICLE&ARTICLE_ID=8783

  - http://kbsupport.cusa.canon.com/system/selfservice.controller?CONFIGURATION=1011&PARTITION_ID=1&secureFlag=false&TIMEZONE_OFFSET=&CMD=VIEW_ARTICLE&ARTICLE_ID=8844
  If all goes well.

• Webcam CNF7051 toshiba laptop; I installed windows 7 and webcam has never worked since.

  I installed windows 7 and webcam has never worked since. What is the solution for this problem?

  Hello

  Since you upgraded to Windows 7 have you run Upgrade Advisor and verify with the
  Compatibility Center (for the compatibility of the device)?

  Windows 7 Upgrade Advisor <-- please="" run="" this=""> http://www.microsoft.com/windows/windows-7/get/upgrade-advisor.aspx

  Also check the Compatibility Center (for the compatibility of the device)?
  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  Check with the system and peripheral manufacturers for updated drivers and many have special
  instructions to help the upgrade to Windows 7. You should also check with the system
  Machine to ask in their forums (if any) for known problems and solutions and support.

  Toshiba - Forums
  http://laptopforums.Toshiba.com/

  Toshiba - Contacts
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contact

  Toshiba - drivers - access your model
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

  Toshiba - Support
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  ==============================================================

  If the system is compatible Windows 7 AND there are drivers for your WebCam
  (and other devices).
  
  Vista references apply to Windows 7.

  You probably need to reload the drivers of the device and the camera'IF' control software
  There is for Windows 7.

  Login as an administrator.

  Control Panel - Device Manager - Imaging - write down of the brand and the model of camera - double
  Click on it and on the tab of the driver is version. Now, click on update drivers (who cannot do anything
  that MS is far behind the drivers of certification). The RIGHT CLICK on the camera - UNINSTALL-
  REBOOT - it will refresh the driver stack.

  Now, go to the system manufacturer's website and download the latest driver of the camera and other partners
  the camera software (if not more recent get the same).

  Download - SAVE - go to them and RIGHT CLICK - RUN AS ADMIN - reboot after each driver.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers to 7 (updated drivers manually using the methods above is)
  to ensure that the latest drivers from the manufacturer of system and device manufacturers are are preferably)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  ==============================================================

  If there are no Windows 7 drivers:
  
  You can try loading the latest driver available in Compatibility Mode which sometimes
  work however, it isn't anywhere near a sure thing.

  Exhausted all other methods in the Troubleshoot utility above before trying these.

  Logon as ADMINISTRATOR for all of them.

  You can try Compatibility Mode but this rarely works on the device drivers.

  Right click on the driver executable (.exe) file - select Compatibility Mode

  In the drop-down menu choose XP or Vista and Service Pack (if it is the version
  "you try the drivers).

  Click OK, and then let the race to see if it will install.

  =================================================

  It also rarely works on the device drivers but it is worth trying:

  Another method to try is to run the .exe (if self extraction) or Unzip (if it is compressed) to a folder:

  How to open a high in Windows 7 command prompt
  http://www.SevenForums.com/tutorials/783-elevated-command-prompt.html

  Open an elevated command prompt : (probably looks like this)

  C:\Windows\System32 >

  CD \the path to this folder as C:\User\Your user Name\Camera_Folder or something else
  the path is the folder where the driver is unpacked.

  So in this case it would be \User\Your User Name\Camera_Folder CD and the prompt
  look like:

  CD \User\Your user Name\Camera_Folder >

  This in type at the prompt and press ENTER.

  -I - one *.inf PnPUtil

  It will take a little time to respond.

  If it does not (error) use the full path to the driver, for example (which can be used
  any guest):

  PnPUtil-i - one C:\User\Your user Name\Camera_Folder\*.inf

  Still wait to see if it will install.

  How to open a high in Windows 7 command prompt
  http://www.SevenForums.com/tutorials/783-elevated-command-prompt.html

  The PnPUtil command syntax
  http://msdn.Microsoft.com/en-us/library/ff550423 (vs.85) .aspx

  PnPUtil.exe - operating instructions
  https://www.faultwire.com/file_detail/PnPUtil.exe * 28200.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">