HP-envy-15-j118so: Does hp-envy-15-j118so (AMD processor) supports the SSD

Similar Questions

• Laptop HP ENVY 15 t-k000 CTO: replace the SSD HARD drive in HP ENVY 15 t-k000 CTO Notebook PC

  Hello people,

  I know it took a lot, but I find a hard time to see the correct answer specially for my device

  I have a HP ENVY 15 laptop that has a hard workout 931 GB Hitachi-HGST SCSI Disk Device (SATA).  What are the compatible SSD should I buy to replace this drive?

  Is it good to buy hybrid SSDHD like the seagate one? http://www.Seagate.com/internal-hard-drives/solid-state-hybrid/laptop-solid-state-hybrid-drive/

  Any recommendations?

  Sorry that I've never tested with hardware before however, I wanted to update until the initialization of the time takes about a minute since it has a core i7 intel and 8 GB of RAM.

  Thank you

  Reinoa

  The best consumer SSD there is a Samsung 850 Evo. It will have the same physical dimensions as a hard drive. 2.5 inches wide and 7 mm thick. A 7mm form factor fits anywhere the will of 9.5 mm. The connectors and mounting holes are in the same places so that they are interchangeable.

  http://www.Amazon.com/Samsung-2-5-inch-internal-MZ-75E250B-am/DP/B00OAJ412U/ref=sr_1_1?s=PC&ie=UTF8&QID=1442231068&SR=1-1&keywords=Samsung+Evo+850

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Drive HARD SSD update of HP ENVY 15 - j009wm AMD processor

  I read on some other forums that the Intel chip was required for updates.  I was wondering if it would be possible to upgrade the HDD of 750 GB in this laptop to an SSD.

  Hello

  Yes. No difference between Intel & AMD processor. You can replace the HARD drive existing DSS to get better performance.

  Kind regards.

• S104nl Pavilion X 360: disappointing with HP, no support forum and HP 800 euro x 360 convertible s104nl does not support the SSD!

  I'm sad and I am disappointed with HP because I have no support in this forum (two question http://h30434.www3.hp.com/t5/Notebook-Hardware-and-Upgrade-Questions/Upgrade-to-SSD-in-my-new-HP-X36... and http://h30434.www3.hp.com/t5/Notebook-Hardware-and-Upgrade-Questions/Hp-x360-s104nl-is-compatible-wi... ) and that my HP Pavilion x 360 s104nl of 800 convertible euro... does not support SSD!

  I've tested my new SSD with old Acer laptop, works perfectly, in my new HP x 360 is not recognized!

  Antonio

  First of all it is a user to User Forum. We do not work for HP and HP are not responsible for what is said or not said. Now a version of English language of your maintenance manual is not accessible. Closest I can find is the one that covers models up to 099 and is probably correct:

  Manual

  The x 360 is not really meant to be open and updated by end users and when the laptop was sold to you no one said or implied that change hard drive for one SSD has been supported or allowed while keeping the warranty. You a Crucial SSD of MX200 with no information saying it was compatible and decided to install it.

  Access the hard drive appears on page 29. Yes, any computer that uses a SATA hard disk can use a 2.5 inch SSD SATA. Function properly, but if there is a model that has given the most compatibility problems is the MX Crucial series. Do not know why. Chances are that a different SSD will work very well. My favorite is the Samsung 850 Evo. OCZ made a good whole as PNY and SanDisk.

  This is how I think that the best information that you're going to get. Let us know if you have more specific questions.

• Does anyone know if Photoshop elements 13 supports the Raw Images from Nikon D750

  I bought a Nikon D750 and my 12 items do not allow me to open raw images, so I wonder if 13 will be?

  Yes. Just be aware that when you buy a camera brand new on the road, you may also have to upgrade from the elements once again.

• HP ENVY 17-j101ex - replace the SSD HARD drive

  Hello

  I have HP ENVY 17-j101ex, with the standard configuration: 2 x 1 TB drive HARD 5400 RPM SATA. I want to buy 1 SSD drive and replace the first (boot) hard disk drive. I don't know if it works or not.

  I want to buy a SSD Samsung 840 EVO 250 GB SATA III (MZ-7TE250BW), 2.5 ", dimensions: 100 x 69 x 7 mm

  I have to: 1 x 1 TB HARD drive (as a secondary drive) + 1 x 250 GB SSD SATA3 (as your startup with system disk)

  Is this ok?

  I found some info, that:

  Supports a 6.35 cm (2.5 in) 300 GB or 160 GB SSD (SSD) drive in 7, 0 - mm (. 28 - in.) thick

  Supports 6.35 cm (2.5 in) hard disks to 12.7 mm (. 50-in) and a height of 9.5 mm (. 37 - in)

  Is it not this Samsung SSD too big?

  I also found information on envy 17 series, which:

  Supports the following single hard drive/solid-state drive combination configurations:
  ● 1-TB, 5400-rpm, 12.7-mm hard drive × 1 + 300-GB solid-state drive
  

  and also:

  NOTE: Supports RAID-0 as default for all dual hard drive/solid-state drive combination configurations.
  

  So, first of all should I disable RAID-0?

  Thank you for your help and sorry for my English

  In fact, I have the same model laptop PC series. You will have no problem replacing the mechanical main hard drive with an SSD. The Evo to Samsung 250 Gig is a very good choice. I suggest you get cloning software, put the SSD in the second slot, start from cloning software and copy (clone) the startup disk for the SSD. You'll slim down the contenst of the diskette of starting less than 250 concerts to achieve, but you can store files off to the second disk of 1 TB in the process. There are other ways to do this post if you have any questions.

  Here is a video showing how to install the hard drive.

  https://www.YouTube.com/watch?v=wx3dMGXrGCc

  RAID-0 is supported, but you wouldn't want as a second hard drive with an SSD. If your readers are appearing as volumes of letters separated in 'the PC' or 'Computer' then RAID-0 does not exist and you shouldn't have to do any disorder in the BIOS.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• dv6 7309tx wanted: HP ENVY DV6 7309tx BIOS update after the corrupt bios, SP68425 F.2D does not work

  The problem began with a blue screen after the updated copy on the road on machine of internal to external hard drive...

  After the reboot, the screen went white and CAPS LOCK has 2 flashes

  Device: HP dv6 7309tx envy

  Current BIOS: 22/01/2013 F.24 / 181E

  Downloaded SP68425 with F.2D since 08/2014

  insydehflash.exe in the package on a spare computer (no HP) does not support the extraction to USB, I will need to update the bios on device dead...

  Device is now in HP PC Hardware Diagnostics UEFI, where I can add usb and start to update...

  However, the raw after extraction of sp68425 bin file is not accepted...

  and I can't go any further with the tool insydeh sp682425 because it does not allow me.

  There is no real BIOS option the last update on the HP support who is crazy enugh...

  F.2d

  FTP://FTP.HP.com/pub/SoftPaq/sp68001-68500/sp68425.html download: ftp://ftp.hp.com/pub/softpaq/sp68001-68500/sp68425.exe

  Please help to send me the appropriate files or explaining how I can generate in a different machine than the one update has no boot?

  Thank you

  Hi all

  If the solution was done by a kind shop in Hungary, http://reballing.hu

  and a specialist in firmware http://vinafix.vn

  So apperently my BIOS has been corrupted that CAPS lock sign showed and it could have been rewritten with HP Diagnostics if HP could provide the RSA key for her...

  In this case it is not provided, you don't have that one other solution, to find a nice (as reballing.hu) repair shop, where the guys are nice enough to disassemble your computer, take the chip and write the data without the requirement of RSA software HP Diag using a writer BIOS correctly. You can also buy writers of the bios and the tools, but he could be uite costly and risky for you to do...

  So you have a repair guy, the only other thing that you might need to trust is the dump of the BIOS correct, please note that the supplied with the softpaqs .bin file is encrypted, so it must be decrypted, it is not an easy task, it worked for me too after awhile, but better to find a provider of bios (saves time for you as well and that is why HP is not willing to give it to you, you have two choices: make a work computer, and read the bios in this way (you must have the identical chip and content, so preferabily the same card mother or product)

  Or go to www.vinafix.vn and ask them to provide you with, these people are kind enough to explain how the thing works and what you need to write your own return data.

  So once that you set is not more than 30 minutes for a handy guy and as they work at the time, it is fairly cheap as well, it cost me 25 USD total (10 for bios) and 15 for the actual work done

  It's a shame that yu can not really find information about this threat, and also that it can happen to your computer at any time it seems that, always in waiting to see what caused, and if she came back or not... but as of now, I am pleased that the computer is back on!

• HP envy 15t: HP envy 15t laptop does not turn even after going through all the recovery solutions, I've seen online.

  My notebook of HP envy turn not, I plugged in the charger and the indicator showed a white light for a few seconds before changing to an orange light. Let charge for a long time and still have the same problem. Please I really need help.

  HI @IdrisOmotee,

  Welcome to the HP Forum!

  Thank you for becoming a member of the HP Forum. It's a place dynamite to get help from the community, to get suggestions and find what has worked for others. Because you have the best experience, here is a link for you to see, if you have concerns: first time here? Learn how to publish and more

  I understand that you can not power on your laptop. When you plugged the adapter AC light was white to turn a few seconds orange.

  What is your specific model of laptop HP 15 t? Computers laptops HP - how can I find my model number, serial number or product?

  You directly to an electrical outlet and do not use a power / surge bar?

  Have you tried a different outlet?

  Here is a link that may help:HP laptops - tests and using the adapter

  Please let me know the results.

  To express the gratitude of my post please click on the "Thumbs Up Icon'." "  If my post the problem that you are experiencing, please click 'accept as Solution' to help others find what worked for you!

• ENVY 15 t-j000 quad edition cto: outputs audio switching does not work in windows 10 birthday when the headset is connected

  Hi guys.

  As you know in 10 anniversary update windows, you can switch between outputs sound when the headphone is plugged directly from the sound icon in the taskbar, but it does not work as it should. If the headset is unplugged then the sound comes from the speakers and they are plugged in when the noise is coming from the headset and I can't select speakers. It shows two devices, but when I select one of them the speakers are selected. Also I tried to playback devices, but still, I can't put the headset as default playback device. She is forced to be like the only communication device. I've updated the audio driver but nothing has not improved. My audio driver is codec IDT high-definition. In addition, I tried the generic driver from the sound of microsoft, which is called "codec high definition audio" and it shows a device like speaker and it doesn't detect any helmet or communication device. So, what's the problem? I am able to use this option of windows 10 birthday or not? If yes how? I need this option because I use a headset a lot and I don't want to plug them each time. Thank you for your attention. I can give additional information if it is needed and I'm hear to help.

  Hi David,

  If you remember, I had problem with the IDT driver after upgrade to windows 10 and other updates. I'll be back to tell you good news. Finally, I solved the problem partially and I'll explain what I did.

  Today, I found that there is some audio drivers in the microsoft catalog site, so I went out there and looked for a codec high definition audio. A list came and saw that there are three tempo IDT Audio driver that are compatible with windows 10. They are all IDT Audio driver version 6.10.6504.0 and they are made in 2015. I downloaded all the drivers of three and tested. The first two of them does not solve my problem but the last which is "Tempo driver update for codec IDT high-definition" made in 08/05/2015 with 13.1 MB did the job. I must mention that you need to install this driver on generic windows sound driver for good results. If you install hp IDT drivers probably do not get good results. After installing this driver now I am able to switch between outputs audio (headphones and loudspeakers). The driver can detect my headset exactly as what it is. He shows me an output until I plug in my headphones and it then adds another exit in the helmet. I put my headphones or internal speakers as default playback device which I couldn't do with other drivers. There are just two problems that does not matter much to me, and I can't ignore them. The first is the light of the button mute on the keyboard does not work with this driver which is not very important, and the second is that there is no Equalization of beats in this driver and instead there is an audio driver IDT, which is very similar to the equalizer, but it beats not affect only the internal speakers the headphones that is more important to me because the sound via the headphones is very clear and good. If there was some ablity to HP to change this driver and add audio beats and allow also the light on the button mute then it would be perfect. The link for this driver is here:

  Driver IDT tempo for windows 10 and put on subsequent day

  Just download the latest driver with 13.1 MB size and enjoy.

• HP Envy 700-214: the HP Envy does support the 750 Ti FTW Evga GTX edition?

  As the title suggests, the edition of 750 Ti GTX FTW Evga does support my office? I am currently engraged by the integrated graphics card because I can't run games on the settings I want and instead I have to stay with the lowest settings. I don't know if my BIOS version is supported by the card. I have again the dinky power came with the computer and if someone can tell me if it has the connector 6 - pin PCIE, which would be lovely. Also, it would be great if someone showed me a picture of the 6-pin PCIE if there. I thank you for reading, have a nice day!

  Hello

  Your PC should be able to support the NVIDIA GTX 750.  Generally the NVIDIA GTX 750 with a few exceptions only requires a 300 Watt power supply.

  HP 460 watt power supply has a PCI-E power connector 6 pin.

• L8X51AV: My HP Envy 17 t-n100 will support ssd sata 3 m2?

  The product manual has this to say on HDD and ssd support for a multitude of different models of envy:

  The manual - http://h10032.www1.hp.com/ctg/Manual/c04696907

  Supports 6.35 cm (2.5 in) hard drives SATA 9.5 mm (.37 inches) and 7.0 mm (.28 in.) thick

  Accelerometer / HDD protection support

  Support for the 2nd HARD drive

  Support for disk HARD SATA (Port1)

  Support for SSD m.2 (support the storage function, assuming that the SSD > = 128 G, Port0)

  HARD drive configurations simple

  Support for the conƭgurations of following hard drive & #29;

  • 2 TB 5400 RPM, 9.5 mm
  • 1 TB 5400 RPM, 9.5 mm
  • 750 GB, 5400 RPM, 9.5 mm conƭgurations SSHD
  • 1 TB 5400 RPM 9.5 - mm w/8 GB NAND SSHD

  Conƭgurations of double storage & #29;

  • 1 TO + 256 GB SSD SATA M2 (TLC)
  • 4 TB: 2 to (5400 RPM) x 2

  Conƭgurations SSD & #29; (available for i7 + GTX PCA)

  • 512 GB M2 (TLC) SATA SSD
  • M2 OF 128 GB SATA-3 (TLC)
  • Value of SATA - 3 GB for the M2 (TLC) 128

  Assistant HP support said that I have the laptop next:

  Product no.: M9X68AV

  Model No.: n000 CTO

  While the my note compartment I have this model:

  Product no.: L8X51AV

  Model No.: 17 t-n100

  The record is not clear what storage configuration applies to which model.  Here is the configuration of my laptop:

  10 64 Windows Home
  6th generation Intel Core i7-6700HQ CPU Quad Core + NVIDIA GeForce GTX 950 M 4 GB discrete graphics
  16 GB MEMORY DDR3 - DIMM 2
  17.3 inch diagonal touch-screen (1920 x 1080) Full HD WLED backlight IPS
  5400 RPM 1 TB hard drive
  Test of office software
  Security software testing
  Battery Lithium-ion 6 cells 62WHr
  DVD SuperMulti burner
  Backlit keyboard
  Webcam HP TrueVision HD with dual digital Microphone, fingerprint reader
  Intel 802.11ac WLAN and Bluetooth (r) [2 x 2]

  I recently ordered this ssd sata m2 of amazon, but I'm not sure its compatible with my system - http://www.amazon.com/gp/product/B00TGIW1XG?psc=1 & redirect = true & ref_ = oh_aui_detailpage_o00_s00.

  Its a Samsung 850 500 GB M.2 3.5 inch SSD Form Factor 80nm.  Can I use in a configuration to double for my laptop with the current 5400 RPM 1 TB HARD drive already in the system?  Or do I have to use one or the other?  Or can I select a smaller SSD storage for a double configuration?  I have to talk to a technician and he said my system does not support a 128 GB ssd and it did not indicate if it is a double or a single disk configuration.  In my view, it is difficult to imaging a new desire to 2015 with an i7 Quad Core skylake 6700HQ processor supports only a meagre 128 GB SSD.  Any ideas on what my system can support?

  I can verify that it works very well. I had HP technology insist that I could use only one hard disk and a maximum capacity of 128 GB. The technicians don't know squat. I use now a configuration double with the operating system and my programs on my 850 m2 sata evo III 500 GB SSD and my data (videos, music and photos) files on the preinstalled 5400 RPM 1 TB HARD drive.

• HP ENVY spectrum XT impossible to install the BIOS update (processors intel)

  The name of the product of my laptop is HP ENVY spectrum XT and it runs on Windows 7 Home Premium 64-bit and its serial number is CND2340MHX, a notification came in the Wizard support for hp advising me on the BIOS update, when I click on the download and install it downloads the installation file but does not install it and when I checked the action record States that it is impossible to install. Is there a reason to fail?

  Hello Moodster1994,

  Please take a look at this document, which provides for the restoration of your BIOS troubleshooting steps.  Please let me know if this helps solve your problem.

  Good luck!

• Can I upgrade my laptop of HP ENVY 17-j092nr a wireless card that supports the 802.11ac?

  I have a HP ENVY 17-j092nr Notebook PC with the wireless stock card.  Is it possible to upgrade the card to one that supports the 802.11ac?

  Mikeeeyy wrote:
  

  I have a HP ENVY 17-j092nr Notebook PC with the wireless stock card.  Is it possible to upgrade the card to one that supports the 802.11ac?

  Hello

  This model series is not the whitelist and you can use virtually any desired wireless card. Intel 7260AC for example...

• Nine (3 days out of the Box) HP Envy 700-230qe automatically restarts after the initial boot...

  I have now a whole new desktop 700-230qe HP Envy (after about a month in the loop of the HP Technical Support).  But again, I have problems.  I took late delivery December 23, 2013.  After giving him enough time to become the temperature of the room, I opened the box and replaced my old HP Pavilion h8 - 1210t with envy again desktop computer.

  Took my time and made sure that everything is properly connected - then pushed the power button.  Everything seemed to work perfectly - until what the brand 20 minutes - when the system powered off and rebooted itself.  But for the rest of the session, everything went well - no problem.  It was Monday night.

  On Tuesday morning (December 24, 2013 - on Christmas Eve), I pushed the power button once again and the system started fine.  But 20 minutes later, it turned off and rebooted itself.  But for the rest of the day everything went well - even if I had to make several reboots all reinstall my applications and migrate my data.  I started to wonder if I still had problems.

  Christmas day (December 25, 2013) is the same thing.

  And once again on Thursday (December 26, 2013) - I finally called HP Technical Support.  I spoke with a gentleman (Terrence) - he accessed remotely my system which makes me nervous (but these guys of Nova Scotia are very good and are savvy customers.  He looked around - ran MalWareBytes and CCleaner - and said that he saw nothing thaat would be a problem.  We agreed to wait a day and see what would happen.

  Rolled Friday autour and you'd know it's the same thing.  Then, I called HP Tech Support and spoke to a lady (Norma) who, after having read the file of description of situation and asking me my name, phone number, email address (which they ask you every time you call - you would think they write this stuff and keep it on file), she immediately decided that the best thing to do is to 'Recreate the IMAGE' on my drive - to which I replied 'NO WAY '.  This seems to be the standard response, if they can't fgure out - recreate the image on your disk.  They don't seem to care about all the work you put into the construction of our system with applications with associated and all data - they want to just Blow-It-Away.

  It made me so angry that I have immeddiately contacted my case manager company HP with the history.  These people - business - case do an excellent job, at least the one I did a great job.  And I know she'll get to the bottom of this situation and go to a happy camper.

  Anyway, if anyone has the same problems with their machine - I'd be interested.

  Kind regards

  Garth

  <>>>>

  I did not read all the answers, but what my qestion... Why are you screwing around? HP has a 21-day return policy, so you can ask them to replace it with the same model or another model as they will send you a FEdEx shipping for a full refund or Exchange label. I wouldn't waste my time with a question like this on a new computer.

• HP ENVY 17 Leap Motion SE NB P: SSD for PC HP ENVY 17 Leap Motion SE NB

  Hello there, I have HP ENVY 17 Leap Motion SE NB PC(), model description HP ENVY 17 - J161EA,

  The processor is Intel Core i7-4702MQ CPU @ 2.20 GHz

  RAM is 12 GB

  and the hard drive is 1 Tera Byte

  I want to add SSD addtonally to improve performance, could you please recommend compatible combinations for that or direct links to where I can buy?

  then is it possible for one SSD boot? I use windows 10. All links will be useful.

  Thank you for your continued support.

  concerning

  Here is the Manual:

  Repair manuals

  See p. 40-42. There are two hard drive bays. You have a 1 TB drive 5400 RPM in one and the other is empty.

  All you need to do is get an SSD. I recommend the Samsung Evo 850:

  http://www.Amazon.com/Samsung-2-5-inch-internal-MZ-75E500B-am/DP/B00OBRE5UE/ref=sr_1_2?s=PC&ie=UTF8&QID=1447200423&SR=1-2&keywords=Samsung+Evo+850

  You need this second adapter bay:

  http://www.newmodeus.com/shop/index.php?Main_Page=product_info&cPath=2_5&products_id=577

  Move the old primary hard disk in the second Bay and the SSD in the main Bay. This will start since the SSD drive. You can make a Windows recovery disk and use it to install Windows on the SSD. Post back if this is not clear.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.