HP ENVY 15-k009ne: replacement of SSD for ENVY 15-k009ne

Similar Questions

• Replacement of SSD for the folio 13 HP

  My Hp folio 13 dosen't find the hard drive even with the clear CMOS procedure so I want a replacement for the SSD, but I find all the specifications of dona so I find a compatible with my laptop, and I prefer one with more capacity. These are some SSD that I found that can be compatible, but I do not know:

  http://www.Rakuten.com/prod/240gb-mydigitalssd-BP4-bullet-proof-4-mSATA-III-6Gbps-solid-state-disk/2...

  http://www.Rakuten.com/prod/240gb-mydigitalssd-BP4-bullet-proof-4-mSATA-III-6Gbps-solid-state-disk/2...

  http://www.Rakuten.com/prod/mydigitalssd-SC2-Super-Cache-2-42mm-SATA-III-6G-m-2-ngff-m2-2242-SSD/265...

  The specifications of my SSD are 128 GB
  SPS: 672216-001
  Date code: 7j1250
  Model: MZ-MPC128 / 0:1

  Please help me find a new SSD

  The first two will work but not the third. See the pins in three connection instead of 2? Only a third is a newer interface called mSATA M.2. Like the one on the right here. You need the type on the left.

  

• HP EliteBook 8730w: replacement of SSD for the boot drive not recognized

  I'm trying to install a Samsung SSD 840 EVO 500 GB instead of the original 500 GB HDD in my Elitebook 8730w (product no. VF889PA #ABG). The 8730w has the latest BIOS (F.20) installed and that is running Windows 7 Professional 32-bit (fully patched).

  When it is connected to the laptop through a USB adapter, to clone the HARD disk image. the SSDS works correctly. Cloning through data Migration Samsung is reported as a success, and the image of the C:\ drive occupies approximately 153 GB. The image of the disc does not include the partition of 1 GB dedicated to HP_TOOLS, due to a known limit of the Samsung software supplied.

  When it is installed in the HARD drive Bay. the SSD is not recognized as a drive and does not appear in the list of startup options. The available boot options only shown are the DVD or a network boot.

  would be very grateful for any advice on the steps required to successfully install the Samsung SSD as boot drive.

  Hmmm.
  Honestly no, I'm not happy with this one. If it was my machine, I'd be a little concerned about whats the corner of the street. In view of the age, is not surprising really, things wear out over time, the mere fact of electronics.
  
  Search through everything you have posted, all photos, pdf, all the text double checking. I am absolutely puzzled as to what happened. If you 100% does not reinstall the hard disk between the posts above where no HARD drive is detected in the menu boot options for the post below that where the HARD drive is detected in the same menu. I would say that you have a problem with either, the ssd, the computer motherboard laptop or the small connector on the sata port, I think on these is integrated on the motherboard, so it seems that your advice is doubtful.
  If his works now, great... but be aware that your machine can fail at some point in the near future. And it looks like a defect of the motherboard, other things are probably waiting to fail.
  
  There is no reason whatsoever your laptop must not have seen this ssd at first startup. A HARD drive is a HARD disk, if its compatible sata, then it will work, no doubt. When he is not on an older machine, its probably a sign of a faulty component.
  
  Looking through your bios options, I recommend the following.
  
  On startup options, get rid of internal nic pxe boot, that will only slow your machine at startup as it will seek for a network bootable device. This is the message that you get at startup saying Media Test Failure, this page is preventable with this option disabled.
  Less built lan/wlan switching on enabled in the options of the terminal, also change. This means that if you use wifi at home for example and you decide to plug in a cable network directly to the router to speed up the connection, it will not pass if it is not defined, you will have to do it manually. I work in a large company and the number of people who have this option is unreal. They all assume when they are docked they will on the wired connection.
  
  Because we are here too, if you ever have problems with a flickering screen, first thing to try, is disable the ambient light sensor which is just below this option of switching. Its fine on normally, but its quite common on 8560p for this causes a flickering screen.
  
  Hope that helped. Good luck in what you decide to do with the machine

• Hard drive not detected after adding 2nd mSATA SSD for HP Envy 14 1002tx

  Hello

  I'm having a problem when adding an extra mSATA SSD for my HP Envy 1002tx model.

  The laptop comes with a 500 GB HARD drive and I see that there is a 2.5 "mSATA SSD slot under the HARD drive, so I bought the same type of SSD and installed it but when I turn on the laptop, it does not introduce yourself. I don't know why?

  I want to have an SSD for boot up the laptop and HARD drive to store animals.

  If anyone knows if there is any software I have to install in order for the laptop to recognize the SSD?

  OR

  Is - this material is defective?

  Thank you in advance!

  Sings,

  Precious wrote:

  pepe999 wrote:

  Remove the hard drive and try to start only with the mSATA SSD.

  Did this and it showed "No. Bootable Device Insert boot disk and press any key"

  I'm really sorry, I could not find this before, but the slot under the hard drive is not compatible with the mSATA disks. It's for WWAN modules! Your laptop is not like 4 I thought, but Envy 14 equipped with the first generation of Intel processors. Envy 14-Sandy Bridge 2000 series could be BIOS modded to make the miniPCI-e interface works with the mSATA disks but Envy 14-1000 series is not possible to change.

  Edit: 2.5 "drive 256GB solid state drive is listed as compatible.

• Upgrade to SSD for HP ENVY 15 t-k000

  I'm looking to upgrade the standard hard drive Toshiba MQ01ABD100 with a Samsung 840 Evo 1 TB (1 TB 5400 rpm). When you watch videos to see how to replace, (http://support.hp.com/us-en/document/c04330942 video shows that the hard drive is connected to the motherboard with a connector zif to adapter sata.) My question is can I unplug the old hard drive adapter and plug it into my ssd for sata 3 speed or I have to do something else being the standard disc sata hard 2. What choices do I have if I do something else?

  Hello

  SATA III is backward compatible with SATA II. I think that your machine uses SATA III. You can check yourself by using the following small program:

  http://www.cpuid.com/downloads/PC-Wizard/2014.2.13-Setup.exe

  (Check out, to the title of the disk controller, SATA III is 6 GB/s)

  Kind regards.

• SSD for HP Envy dv4 5312tx

  Hello

  can I add an SSD for my hp dv4 5312tx envy?

  that one is recommended? and how do I restore my 8.1 existing windows to new SSD?

  Kind regards

  Andy

  Yes you can. Here is the Service Manual:

  Manual

  See page 38. The best SSD buy is a Samsung 840 Evo like this:

  http://www.Newegg.com/product/product.aspx?item=9SIA29P1EC5222&cm_re=samsung_840_evo_ssd-_-20-147-248-_-product

  I'm having a hard time finding information about the model you posted. Are you sure you typed it correctly? If you had Windows 8 initially I can link you to an OEM restore disk image. You can also clone the existing overhead for the SSD drive, but you should get a pretty good SSD size to make. You can also use the HP revovery DVD made from the HP Recovery Manager or you can rstore from a backup of Windows System.

  Post back if you need more specific help.

  If it's 'the Answer' please click on 'Accept as Solutuon' to help others find it.

• Compatibility SSD for HP touchsmart all-in-one PC?

  Hey all, my parents have a HP Envy 23 Touchsmart all-in-one PC. The model number is 23-d117a.

  He has a mechanical hard drive 2 TB in it, and I want to replace it with an SSD for Christmas. I have no qualms with opening on the back of the PC and on the hard drive Bay to do the physical installation, and I can understand how to clone the content of the hard drive on the whole quite easily.

  I just want to know if there will be problems with compatibility. I guess most of the time a hard drive is a hard drive and that it will work as long as it uses the correct file format, but I don't know if HP has put any kind of limits on the machine that prevents him from working.

  In addition, it is less important, but if anyone can recommend a good support to the smaller SSD fit into the 3.5 HARD drive enclosure and again the line upward with the connectors, I'd appreciate it.

  Thanks for your time.

  Hello @Solidiquis,

  I understand that your question is if there are restrictions on the use of a DSS on your parents HP ENVY 23 - d117a TouchSmart all-in-One desktop PC. As much as I know there is no restriction on the use of a Solid State Drive on this computer. In fact, I found this document for computer explaining the differences. FAQ of propulsion hybrid Seagate Solid State. As for the recommendation on the necessary adapter unfortunately I can not make a specific recommendation, but I believe that everything will work. Here is an example of what you are looking for StarTech.com 2.5 "to 3.5" SATA aluminum box drive hard adapter with SSD/HDD up to 12.5 mm height.

  I hope that I have answered your question to your satisfaction. Thanks for posting on the HP Forums. Have a great day!

• Satellite R830 - 1 K 7 - replacement of SSD

  My 128 SSD G died. I can't find any SSD that fits in this computer.
  I have an another Toshiba laptop recent (protected RA-A-19 q with an SSD of 256G) which is exactly the same.
  Toshiba uses a connector owner and does not seem to sell DSS replacement for its computers?
  Not expensive other brands of replacement SSD for laptops Toshiba apparently.

  Any indication where to find SSDS for laptops Toshiba or adapters to fit a standard would be approciated.

  Thank you

  The Portégé has been fitted with a common SATA SSD 128 GB 1.8 inch drive.
  You can use them ALL! SSD drive from different manufacturers that meets the specifications of material even... you don't have to buy the exactly the same SSD.

• Please recommend an SSD for Toshiba Satellite C660D-10W

  Hi people

  I'm looking for a recommendation for an SSD for my laptop, Satellite C660D-10W

  I want to perform a clean build - I have a new licensed copy of Windows 10 Pro.

  I bought a disc of Kingston after some research online, but subsequently discovered Kingston declaring that they do not support the use of this device in my laptop.

  Toshiba customer support put me on "Topaz", which recommended product + service (though not an SSD!) cost more than 250 pounds. For that price I can get a replacement of like-for-like of the laptop under warranty!

  I'm looking for a simple option where I can buy a SSD and do the installation myself. 250 GB to 500 GB for the region of £60ish.

  Thoughts?
  Chris

  I have a Crucial SSD in my C660 - 1 7. He turned my laptop. Boots in seconds!
  They have special offers for the moment like this http://uk.crucial.com/gbr/en/satelli...-10w/CT6696741 250 GB @£ 63,59

• Add the SSD for HP Pavilion desktop computer

  Hello

  I would like to add an SSD for my HP Pavilion 500-035ed (office). I do not want to replace the existing drive, I would add a second drive.

  I have already noticed a free sata connection and a free power cable, but I didn't notice a physical position for the support and the screws etc...

  Does anyone know if there is a manual that describes the physical position for a 2nd drive in HP Pavilion 500-035ed (office)?

  Thanks in advance,

  S.J. Westra

  Hello

  Look at the picture below and see if your model is configured for one SSD installation.

  

  I see that your particular model is native/sold to the Netherlands.  There is a forum member that frequents this forum who lives in the Netherlands. Hmmmm that's a good guy!

• Portege R500 - how to replace the SSD?

  Hello

  1. I have trouble using the recovery CD. The computer to read the CD once and give me an error message that it cannot partition the SSD drive. Ask me to restart the PC. Then I insert the CD change once again, the sequence of boot on the CD, but now, the computer does not recognize the recovery CD. Now, the freezing of the PC after start.

  2. I have a legal windows vista CD I tried to install in the PC but I'm not a clean install because the computer does not read the CD

  3. I tried the CD in another computer. I insert the CD to reboot and the computer immediately went to the wizard of microsoft vista.

  4. I tested the CD rom and it works.

  5. I believe that the solid state SSD laptop drive has failed.

  I opened my laptop to check what I need to buy the brand SSD. However, is the first time that I change a SSD drive and I don't know where he is and how to replace. So, if someone can answer with the steps of how to do to replace the SSD I will appreciate it.

  Thank you
  Nils.

  Hello!

  In my opinion, it could also be a problem with the CD/DVD drive. I mean you have tried another drive and the computer laptop doesn t read this disc too.
  So for me it sounds like this drive is also defective.

  But as Akuma said you should also check the SATA Mode in the BIOS.

  I think the best way would be to contact you nearest ASP. They can check a defective hardware for laptop parts and Exchange. If your laptop is under warranty, repairs are free.
  The ASP s list that you can find here:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Good bye

• Replace the SSD 2015 MBP retina

  Purchased the base early 2015 retina MBP (was on a real budget) and I'm looking to replace the SSD with a larger SSD.  I read on various forums that this can be done, but that nobody makes compatible SSD yet... However, these positions have been since around about a year ago.  Has this changed?  Is it possible to buy an SSD and replace my existing and if so, where?  Can't seem to find anything on ifixit.com, I saw mentioned OWC.

  Thank you!

  Now, there is no replacement for the SSD for Macbook Pro retina 13 or 15 (2015) as Apple use a non-standard interface of its SSD.

  The most economical way to clean large SSDS such as 512 GB or 1 TB on the last Macbook pro is to customize your rMBP when you bought from Apple so far.

• Is a good PNY CS1211 SSD for my computer?

  I own a MacBook Pro and I am wanting to upgrade the HDD with a SSD and I wonder if a PNY CS1211 SSD (480 GB) will be my fast computer. Also, I wonder if I can exchange my SuperDrive with a trolley that can contain a HDD/SSD without voiding my warranty. Please answer; Thank you very much!

  I own a 13 "MacBook Pro early 2011 2.3 GHz with 16 GB (2x8GB) DDR3 1600 RAM.

  SSD drives... OWC (macsales.com) or Cruical are most recommended.  I've been running a Crucial SSD for 2 years without problem.  Samsungs have many problems reported here... maybe because of thousands used if the questions are obvious but even Samsung does not claim full compatibility Mac on their Web site.

  As for replace the Superdrive by 2nd drive... not really a 'guarantee' issue with a 2011 system that has left no guarantee.  But it is not exactly "authorized" by Apple.  You might get some resistance of Genius Bar if you take it in to... say... battery or display or the logic of Council's questions.  Probably if it was still in warranty the warranty would be void.

• can I add a disc ssd for my Pavilion m7-1015dx

  What should I do to add an SSD for my HP Pavillion M7-1015dx currently on windows 7 64 bit, but intend to upgrade to 8 64-bit windows

  MRcreates wrote:

  What should I do to add an SSD for my HP Pavillion M7-1015dx currently on windows 7 64 bit, but intend to upgrade to 8 64-bit windows

  Hello

  Yes, you can add it. A 160 GB ssd is listed as compatible, but I think that the ability is not limited.

  What I did when I replaced my hard drive with an ssd has been to perform a new installation of Windows (same version) using the product number (do not register Windows online!) at the bottom of the laptop. Then I waited a message to record the OS and saved on the phone. Maybe a recovery reduced image created in the HP Recovery Manager can restore the system of origin on an SSD. These are usually smaller than the original hard drives and the recovery process ends with an error with the original image recovery disks.

  Edit: you will need a support (in case you want to keep the old hdd in the secondary hard drive Bay) etc so the right part number is: 681976-001. Run the part number on google or ebay to get it.

• SSD for Inspiron 2350

  Hello

  Is it possible to change my Inspiron 2350 for one SSD HARD drive? He came by default with a WD 1 TB HARD + 32 GB SSD drive for caching.

  I'm looking to replace the small SSD with a 512 GB SSD for OS and keep the 1 TB of data. Is this possible?

  Yes, it is - you need a player mSATA (NOT the newer readers of NGFF m2 which resemble the connector and displace mSATA market fairly quickly at the end).