HP ENVY 15-k046nd Notebook PC: laptop upgrade

Similar Questions

• HP Envy 15-j109TX Touchsmart computer laptop upgrade help

  Hello, my HP Touchsmart Envy 15 - j109TX laptop computer is shipped with 2 GB DDR3 NVIDIA GeForce GT M 740 graphics. Can I put graphics or higher cards of 4 GB DDR3 NVIDIA GeForce GT M 750 ?

  Also, I want to upgrade the RAM to 16 GB and a 2 TB HARD drive . Is this possible? I don't see any customization option in the HP Shopping Web site. So how can I do? also, thanks for mentioning about cost of upgrade of these.

  Hello
  
  Here are the specifications of product: http://support.hp.com/us-en/document/c04031367
  
  Go through the Page 4 and 5 of the user manual:
  http://h10032.www1.HP.com/CTG/manual/c04091768.PDF
  
  Upgrade options:
  Up to 1.5 TB drive HARD with no hybrid NAND support
  
  Up to 16GB 1600 MHz RAM with boost DDR3L dual channel
  
  Although Nvidia 750 M dedicated 4 GB card is indicate against the graphics options, I think not that this is possible because actually nvidia in this model is not as a card but more a chip which is attached to the motherboard. I think you need to contact HP in your area directly for this.
  
  It will be useful,
  Thank you

• HP ENVY dv6-7309tx Notebook PC (laptop does not smooth)

  I have a problem with my laptop. When I reduce windows, he's not going smoothly and a little slow when I open a browser.

  Hi AustinChandra,

  Thank you for visiting the Forums HP's Support and welcome. I read your thread on your HP ENVY Notebook dv6-7309tx and having problem with performance. Here is a link to cool your laptop. Click on refresh your computer from the startup screen. You can also watch somethings that will help your system performance in this document.

  Hope this helps you.

  Thank you.

• HP ENVY 17-j184na Notebook PC: problems of wireless connection on the new laptop

  I bought a new laptop a few days ago and tried to connect to the network without wire in our apartment for 2 days but nothing helped.

  So far, I did the following steps:

  -Restore the system to factory settings.

  -Powercycled the network.

  -Reset the TCP / IP / catalog Winsock.

  -Checked and changed the stop option.

  -Re-installed and updated all the drivers of network.

  -Started in SafeMode w / networking and still unable to connect.

  -Ran all 3 windows solve problems and the problem of internet connection of HP.

  -Updated the BIOS with the latest version of the driver.

  I created my own personal hotspot using my phone and managed to connect very well, so I think that maybe that's a problem with my laptop to connect to my router, but everything else connects very well.

  I have an ethernet cable connected and has associated with perfectly too.

  My laptop is a HP ENVY 17-j184na Notebook PC and my wifi specifications are

  Manufacturer: Broadcom
  Description: Broadcom BCM4352HMB 802.11ac adapter Wi - Fi 2 x 2
  Driver version: 6.30.223.221
  Physical address: 40-E2-30-BF-F0-0D

  Modems are involved as much as I have the following (my apologies in advance, don't know how it's called technically, but it's the same one as in the photo):
  http://www.broadbandchoices.co.UK/guides/hardware/sky-broadband-routers

  I don't know if that helps, but also sometimes the connection does not appear in my list of connections, but it is very rarely, about 3 - 4 times in the last 2 days.

  If anyone could offer advice that could help I would really appreciate it and if someone needs additional information then please let me know (and possibly let me know how I could get this information).

  Thank you in advance for anything

  Hi all

  Problem has been resolved.

  Just in case someone else has the same problem, if you try to connect to a router and it communicates but don't connect does not then it might be a problem with the frequency to which you are trying to connect.

  In this case, my laptop could connect only to a 5 GHz frequency but my router was capable of a frequency of 2.4 ghz, so he was able to connect to all the rest but not that. (Particularly if you use a hub SKY).

  The problem has now been resolved by buying a wireless adapter card that plugs into the USB port. If you don't need to buy a Please make sure that buy you one with dual band capabilities.

  I hope this helps someone in the future!

  Best regards

• F9M06UA: AC wifi upgrade for the product number: F9M06UA TOUCHSMART HP ENVY 17-J185NR NOTEBOOK PC

  Y at - it an option to upgrade wifi AC for the TOUCHSMART from HP ENVY 17-J185NR NOTEBOOK PC / PN F9M06UA?

  You are the very welcome.

  Yes, with one of these cards, you will have bluetooth.

  I prefer Intel products, but the MCB card should be fine also.

  I bet, too, that you can install the Intel 7260 AC map better, even if it is not on the list.

  Intel Dual Band Wireless-AC 7260 802.11 ac 2 x 2 WiFi + BT 4.0 HP Part # 710661-001

• TouchSmart HP ENVY 15-j040us Notebook PC-problem with internet gambling after upgrade to 8.1 windows

  I have a HP Envy 15-j040us Notebook PC Touchsmart is currently using 8.1 64-bit windows.  I play 2 Farmville on Facebook.  I started having problems after installing Windows 8.1.  My mouse hesitates and reluctant game and I can barely move on the screen.  I am not real computer savy but can follow directions if you can just tell me what I need to do to correct this.  Everything on the screen is just very slow and the mouse does not seem to want to go where I'm pointing to it.

  Hello @aodom ,

  Welcome to the HP Forums!

  I see that you have any questions, play Farmville 2 since the update to Windows 8.1.

  First, update the drivers for your graphics (GPU) with the following download: driver Intel graphics high definition (HD).

  Once you have done this, update Adobe Flash player plugin with the following download: Adobe - Flash Player

  Once you have updated the GPU and the Flash Player, disable hardware acceleration for Flash on your laptop:

  1. Right click any where on the Farmville game once it has loaded.
  2. Select settings.
  3. Make sure that you are on the tab display/graph (see image below).
  4. Clear the check box to enable hardware acceleration if it is available. If you are prompted to activate the control of your webcam or microphone that these steps do not apply because the game is not trying to use the acceleration.

  

  Let me know if it helps.

• Upgrade RAM on HP ENVY 14-2166se Notebook PC

  Hi all. Recently I bought HP ENVY 14 - 2166se Notebook PC, comes with 8 GB (2 x 4 GB) of RAM preinstalled. I'd like to update the 16 GB RAM, but do not know what is compatible with my laptop. Any piece of useful advice is welcome and will be highly appreciated.

  Also, please advise if someone known problems so far?

  Thank you.

  Hello:

  Looking at the specifications of your laptop, he needs 2 x 8 GB PC3-10600 memory.

  One of these should work.

  If I had to make the purchase, I'd buy in that order - first to fourth choice:

  1 G.Skill

  2 patriot

  3. critical

  4 corsair

  http://www.Newegg.com/product/ProductList.aspx?submit=Ene&N=100007609%20600000414%20600213067&IsNodeId=1&name=16GB%20%282%20x%208G%29

  I can't advise on any questions that I don't have your model laptop.

• HP Envy 14-1010nr: HP Envy 14-1010nr Notebook PC: replace and upgrade to USB 3.0 ports

  Hello
  
  I have a HP Envy 14 - 1010nr Notebook PC, which had two USB 2.0 ports on the left side and a USB 3.0 port on the right.
  
  USB 3.0 port was damaged such as connectors plugged it seem a little loose and can move laterally a little so that the connection to the device comes in and out - makes it uncertain to copy some stuff on a hard drive through it, for example.
  
  Is it possible for me to replace this port? Where could find a spare part for that if it can replace?
  
  Even though I am inside the computer, I might as well replace the USB 2.0 with USB 3.0 ports ports if the pats replacement for that exist...

  You're right, because there is no audio + USB 3.0, only the original + USB 2.0

• HP ENVY 17-j010tx Notebook PC: replacement laptop battery

  HP ENVY 17-j010tx Notebook PC (ENERGY STAR)

  I can't do a battery of alternatives in Australia

  Companies that say they can do, are asking an extra $ 250.00 in application fees. more 4 weeks for delivery!

  Thanks for the help, people who hold that my warranty extented on unit told me that my warranty would be void and avenues, if not hp approved was adjusted.  Who am I to disbelieve.

• HP ENVY m6-n113dx Notebook PC: update the BIOS F.22A and keyboard

  Hello

  I was hoping that over time someone would have posted something with a similar problem, I have, but its been a while so I guess I would ask and I hope an answer and I hope I'm not the only one experiencing this problem.

  Awhile back, I upgraded my laptop BIOS (HP ENVY Notebook PC m6-n113dx) from F.21A to F.22A, who apperently offers improved performance of the internal keyboard. After the update, nothing seemed very different. However when I play a game and press a key on the keyboard, the charater would sometimes get stuck on this action of the key as if she was held down. Usually, I just press the button again to stop this action, although this has become an embarrassment.

  I've been reading the forums and found a lot of options for apperently decommissioning of your BIOS to earlier versions, but I would like to know where I can find a how to or may downgrade my BIOS of F.22A to F.21A, especially for my laptop.

  Thanks in advance

  Hello @BCC119922,

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems, with the help of the community!

  I understand that you have a problem with the keyboard and wanted to help you!

  This is possible, and you can find the drivers for your product here:

  Drivers - HP ENVY m6-n113dx Notebook PC (ENERGY STAR)

  Select your operating system and then find the BIOS category.  In this drop-down list, you will see the BIOS update for F.22.  You should be able to choose the previous versionsto the right Details.  This will allow you to access and download version F.21 A.

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution' , this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Have a great day!

• HP ENVY 17-3001er: updated graphics card on HP ENVY 17-3001er Notebook PC

  Hi, I use HP ENVY 17-3001er Notebook PC and video card is not powerful (Radeon (TM) HD 7690 M XT), so someone knows I can upgrade my laptop?

  Homer7709 wrote:

  Hi, I use HP ENVY 17-3001er Notebook PC and video card is not powerful (Radeon (TM) HD 7690 M XT), so someone knows I can upgrade my laptop?

  Hello

  I don't think anyone can. The vga is soldered to the motherboard and the only way to get a more powerful vga is replaced by a Board of Directors with a more powerful vga onboard (usually the same chip with more memory). Unfortunately there must be a compatible card available for laptop and it wouldn't be enough as an upgrade anyway. These cards are also quite expensive and not worth the investment in my opinion. Get a new laptop.

• HP ENVY 17-j053ea Notebook PC: windows post 10 install; touchpad does not work!

  Hello

  I pray that someone can help me.

  Brought my HP ENVY 17-j053ea Notebook PC early 2014, work very well running windows 8.1.

  In the month of August / Sept upgraded to windows 10 and that s when the problems started.

  My touchpad has stopped working... I tried a multitude of things that sometimes worked, but after a few days the pad has stopped working again.

  The problem started in the month of August on vacation so I installed the following:

  Driver and utility Chipset

  Intel Management Engine Interface (MEI) driver - sp63410

  Rapid Start driver Intel - sp63411

  Smart Connect driver Intel - sp63413

  Synaptics TouchPad Driver - sp63417

  HP Notebook System BIOS update - sp69886

  HP Notebook System BIOS Update (Intel processors) - sp66941

  The event system HP utility - sp65792

  Intel Rapid Storage Technology driver - sp63554

  This solved the problem for a few weeks, but then the touchpad stopped and started periodically and eventually didn't work for about 2 months.

  While the Forum last night I fought, I found the resolution posted by DanG82 with the title:

  HOW TO TROUBLESHOOT UPGRADE POST-WINDOWS 10 ON HP LAPTOPS

  Follow all the instructions step by step and was hopeful this could work... but it didn't.

  Whereas really return to 8.1 windows because it's so frustrating using a mouse on the go.

  Please please can someone help me?

  You are the very welcome.

  The only other suggestion I can offer would be to uninstall the touchpad driver and software in the menu programs in Control Panel, restart and try this driver synaptics, even once, I posted.

  Or try the driver directly from synaptics.

  Always uninstall the previous synaptics driver before installing the new.

  http://www.Synaptics.com/en/drivers.php

• sound on HP ENVY 15-j035eo Notebook PC problems

  Hello

  I have a HP ENVY 15 - j035eo Notebook PC and suddenly all his disapered.

  I've updated to windows 8 to 8.1 worked sound for a 1-2 weeks

  .

  When I click on the speakers says (translated from Swedish ;-))

  "Sound upgrades for the following problems: speakers/headphones (IDT High definition audio codec)". ""

  Nothing to do but restart W8 and start over? BTW, I hate W8 ;-)

  Hello

  Try the following

  Download IDT Audio Installer on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp63501-64000/sp63555.exe

  One time finished, open windows control panel, open Device Manager and open sound, video and game controllers.  Right click on the IDT device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

  When you are finished, download and reinstall the Chipset driver at the following link.

  Chipset Driver - Windows 8.1

  Once the reinstallation is complete, shut down the laptop by pressing the SHIFT key when you click Shutdown to temporarily prevent a hybrid boot.  Then disconnect the AC adapter and then remove the battery.  Press and hold the Power button for 30 seconds.  Reinsert the battery and plug in the AC adapter.

  Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu.  Press f5 to load the default values (sometimes it's f9, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

  Allow Windows to fully - charge it will automatically load an audio driver, but let just this complete.  Then open your download folder, right-click on the IDT Installer and select "Run as Administrator" to launch the installation.  Once this done, do a right-click the speaker icon in the taskbar and select playback devices.  'Speakers and headphones' left click once to highlight, and then click the Set Default button - check if you now audio.

  Kind regards

  DP - K

• HP ENVY 15-j083ca notebook PC

  I just bought a laptop HP ENVY 15 - j083ca Notebook PC. I upgraded to Windows8.1 Pro. Now some drivers need to be reinstalled, but when I go to the support page I can't find my model of laptop there. HP ENVY 15 - j084ca Notebook PC is precisely there as well as others but not my only.

  How can I get the drivers for my laptop, I bought at Costco, Canada (Ontario)

  Hello:

  Look at the page of product for the j084 model specifications.

  If the hardware is the same (Intel, Intel graphics card), you can use the drivers provided by the j084.

  They will be exactly the same as those you need for your model.

  Drivers Windows 8.1 will be unavailable for at least a week, however.

• HP ENVY 17-j011sg Notebook PC: HP ENVY 17-j011sg based free spare battery parts

  Hello

  I'm very angry because I need to change the battery (security expited in January 2016) and in all the links of 1000 HP, I can't find the number. HP could make it more complicated, but there is no way.

  At the end of the spare parts site https://parts.hp.com/ there is no battery number to buy. I need to buy the keyboard too, because there is missing it B... and I can't find my product number.

  One could look at which is the number of spare parts to buy:

  Keyboard and batery:

  Modellnr. : E8P11EA
  
  Seriennr. : [Personal information]
  
  HP ENVY 17-j011sg notebook PC

  In the end, I have a very bad image of this structure (if I need to buy another laptop, you can be sure that I won't buy HP).

  Thank you

  (if someone can tell HP that is really not easy for the user, might be nice)

  Spare part number

  710417 001

  Description:

  6 cell, 62WHr 32.8AH Li - ion

  Please select 3 Illustrated catalogue of spare parts under the table of contents.

  http://h10032.www1.HP.com/CTG/manual/c03922401

  Hope this helps, for other queries in response to the post and feel free to join us again

  * Click on the white button on the right to say thank you Thumbs Up *.

  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

  Thank you

  GBL84

  I'm not an employee of HP