HP Envy 15-k153nr: HP Envy 15-k153nr SSD update

Similar Questions

• HP Envy 17-j053 SSD update

  Hi all

  As I bought a HP Envy 17-j053 laptop from Currys/PC World (UK) and I know that my laptop has a second hard drive Bay. I think that the performance of my laptop are strongly a bottleneck of slow hard disk 5400 RPM HP put in it, so I looked in the addition of an SSD.

  I found the cable and box rubber on Amazon for a total tear of £60 and I found the SSD that I want to install (840 Pro 256 GB Samsung).

  Question is the laptop won't work with the SSD in HDD1 (as the boot drive (windows 8.1 & programs)) and the 1 TB in HDD2 as a data disc?

  I'm sorry I missed it. It won't cause any problems. I have a very similar model... 17 t-j029nr envy and have used it with a SSD in primary and secondary and no problem at all. In my humble opinion, it's how it should be implemented... SSD in the main housing and the big slow spinner only for storage.

• ENVY 14-k124TX: SSD update for more storage (ENVY 14 k)

  Hello

  I have a 14-k124TX currently Envy and you want to upgrade the disk SSD 128 GB to 500 GB.

  The vehicle currently has a samsung mzmtd 128 and I want to use a Samsung 850 EVO series. I opened my laptop and I'm confident on the evolution of Physics in the. I meausred the exsisting SSD and it corresponds exactly with the specifications of the new, so I'm also confident it will fit.

  I'm after some advice on

  (A) the computer will be able to use the SSD physcally (I'm sure it would but I better check)

  (B) what is the best way to transfer the operating system and all my personal files and programs, I would also be able to buy an MSATA USB3 case if necessary.

  Thank you in advance, all the tips

  Griffin.

  @griffin040

  griffin040 wrote:

  Hello

  I have a 14-k124TX currently Envy and you want to upgrade the disk SSD 128 GB to 500 GB.

  The vehicle currently has a samsung mzmtd 128 and I want to use a Samsung 850 EVO series. I opened my laptop and I'm confident on the evolution of Physics in the. I meausred the exsisting SSD and it corresponds exactly with the specifications of the new, so I'm also confident it will fit.

  I'm after some advice on

  (A) the computer will be able to use the SSD physcally (I'm sure it would but I better check) Yes. The Samsung EVO 850 has the same factor of interface and the form (2.5 '')

  (B) what is the best way to transfer the operating system and all my personal files and programs, I would also be able to buy an MSATA USB3 case if necessary.  Download and use the tool to migrate data from Samsung and a usb cable to sata. The transfer will be quick and painless. Let the original SSD in place during execution of the migration and Exchange later in the new Samsung EVO 850.

  Thank you in advance, all the tips

  Griffin.

  I have a Samsung EVO 850 and really like it.

• HP envy k253ca: HP Envy 15 k253ca SSD update

  Hello

  I want to upgrade my hard drive to new ssd and I have several questions

  1. What are the dimenstions of the hard drive in my laptop, because I can't find no internet. or how to test compatibility.

  I decided to purchase this ssd Sandisk (link below)

  http://www.Amazon.com/GP/product/B00S9Q9VS4?PSC=1&redirect=true&ref_=ox_sc_act_title_1&Smid=ATVPDKIK...

  2. other information that must be considered before purchising article, so I don't want to throw away money.

  Thanks for the attention

  Access to the hard drive on your model is very difficult and potentially void the warranty. See page 62 of the manual here:

  Repair manuals

  The SSD that you selected is the correct size and form factor and would work, but there is the problem of installation and software migration and security. Post back if you need help most.

• HP ENVY 7640: failed to update for windows 10

  I had this error on update, I have windows 10

  • Error of Hewlett-Packard - Company WSD multifunction printer, MFP, HP ENVY 7640 of material other series - Null Print - 0 x 80070103

  • Update driver HP for Fax - series HP ENVY 7640 - error 0 x 80070490

  Hi, Hello!

  Thanks for sharing this request in this forum.

  Please, try the following steps and hope this helps!

  1. Go to settings-> devices-> devices
  2. Click the Device Manager link at the bottom of the screen.
  3. Open "printers".
  4. Then uninstall/remove the "unknown device" if present.
  5. Restart Windows 10 update.

  Thank you and best regards,
  meg0316
  
  I work in HP, but I am personally.

• HP ENVY 15-j030eb - SSD HARD drive replacement

  Hello

  Really hard to find all the information on the net regarding this laptop (no reviews, no tweaks etc.). Again I would buy the desire because of his good record. However only if the following can be done:

  Replace the HARD drive internal 1 TB per a DDI, preferably a Samsung 840 EVO Series 250 Gb.

  If so, can you just plug in, or do you need to support etc. Anyone who has done this before?

  Thank you

  Sebastiaan.

  Belgium

  Hello SebastiaanB,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I understand that you are looking to put a 256 GB SSD in the HP ENVY 15-j030eb. I'd be happy to help you with this. I'm you provide a link to the HP Support document: PC portable HP ENVY 15 and HP ENVY TouchSmart 15 Notebook PC Maintenance and Service of Guide. If you look on page 5 you will see that the HP ENVY 15 laptop only supports an SSD 24 GB mSATA, your wanting to install the 256 GB it would not work. What you would end up with, it's either the BIOS would not see the drive at all or it would be very slow and you would lose any benefits that you would get to use an SSD.

  To answer your second question in the guide even if you go to page 44, you will see instructions on how to install an SSD in your laptop.

  I hope that I have answered your questions to your satisfaction. Thanks for posting about these issues on the HP Forums. Have a great day!

• HP Envy 17 "touchscreen: BIOS update failure

  Today I went to the page for my desire to get updated for network drivers.  While there, I saw an update of the bios date 03/08/16 (today) and went ahead and installed it.  He said in a box she had to restart my laptop and that was the last time that my cell phone worked.  I now have a black screen and the cap lock key blinks twice, then paused and then flashes twice.  Over and over again.

  The system does not recognize HD, DVD, or USB drives.

  Is there anyway to get this system?

  Hi @campyrs52,

  Welcome to the HP Forums!

  I understand that you get a black screen trying to turn on your HP Envy 17 "laptop touch screen. I am pleased to see that for you!

  First of all, I would recommend to try to recover the BIOSand then if that doesn't work, try the steps outlined in this guide, the computer does not (Windows 10).

  If you are unable to reach a resolution, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

  I hope that this post helps!

• Cable Envy 17-j029nr SSD

  I need to buy a cable to install an SSD in my Envy 17-j029nr.

  HP ENVY 17 Notebook PC

  Product: E0K90UA #ABA

  Warranty: 2y2y0y

  Model: 17-j029nr

  Rev: 1968-100

  Issues related to the:

  What is the part number?

  Where can I buy it?

  Y at - it one provider other than HP?

  No matter what video on how do?

  Thank you.

  I think that's all you need:

  http://www.newmodeus.com/shop/index.php?Main_Page=product_info & cPath = 2_5 & products_id = 542

  Is there a video link down to the bottom of the Web page.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• HP Envy 15 j181 - na: update BIOS on HP Envy 15

  Update BIOS using HP Support Assistant fails.

  I have HP Envy 15 j181 - na with processor INTEL (not AMD).

  Where can I download a BIOS update which will install properly.

  Hi @davidUK,
  
  Please become a member of the HP's Support Forums. I understand that you have a problem with a BIOS update. I'll be happy to help you.

  What version of BIOS is on the computer?

  The last update of the BIOS was June 8, 2016 Version F.67 A. rev.

  You can find it at support.hp.com.

  Please keep me informed of the progress of things.

  If you need help, let me know and I will gladly make all that I can to help you.

  Please let me know if that solves the problem by marking this post as "accept as a Solution.
  To simply say thank you, click the Thumbs up below!

  Thank you.

• HP ENVY 15-j040sr: HP ENVY 15-j040sr SSD

  Hey! I ENVY 15-j040 and want to upgrade with SSD. Could you please answer if I have a chance to add (preferable) or replace the hard drive? What type of SSD is supported? Thanks in advance.

  See p. 47 of the manual here:

  Manual

  Your laptop has a slot mSATA for the WSSD of older form factor, but this device can only be used in conjunction with a mechanical hard disk as a cache of acceleration Intel Rapid Storage. It is not bootable, unless it's the only hard drive in the computer. Even in this case, the speed of the mSATA of this type is not faster that a SATA 2.5 inch SSD, and the latter are cheaper and easier to find in usable formats. So, your best option is to replace the mechanical drive 5400 RPM with a SSD 2.5 inch SATA-III and my suggestion is always the Samsung 850 Evo.

  https://www.Amazon.com/Samsung-850-Evo-2-5-inch-MZ-75E500B/DP/B00OBRE5UE/ref=sr_1_1?s=PC&ie=UTF8&QID=1475416485&SR=1-1&keywords=850%2BEvo&th=1

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• HP ENVY 17-j006ea SSD Upgrade - necessary caddy?

  Hello

  My model (HP ENVY 17-j006ea) came with two hard drives. I use the primary for windows and only for programs and I would like to replace it with an SSD.
  
  Do I need to buy a Bay secondary adaptar - or can I use the same parts that are currently used for my main drive?
  
  Thank you very much

  You have 2 Bay adapters for 2 hard drives. You can use an SSD in the adapter currently used for the main drive. The model of hole and the location of the SATA connectors is the same. Bay primary and secondary adapters are a little different and not interchangeable, but if you have one of each, you have everything you need. Post back with more questions.

• HP Envy i7: random BIOS update stuck

  Then
  I put my computer in mode "Eve" and back in my bag. I come home and get him out I notice it is still and REALLY hot. I opened it and I am greeted by a "Update of the HP BIOS" screen (which).
  
  It reads:
  
  "THE system BIOS is being restored. The recovery will take several minutes to complete. »
  
  "Do not stop your computer during the process."
  
  'Write the new BIOS image.
  
  "Block 293 / 2048.
  
  "14% of activity."
  
  And he was killed on 14% for several hours.
  I think to turn it off (by removing the battery if needed), but I'm worried that it could cause permanent damage.
  
  Please help me
  Thanks in advance

  Hi @Masterfeli,

  Welcome to the HP Forum! Thank you for becoming a member of the HP Forum. It's a place dynamite to get help from the community, to get suggestions and find what has worked for others. Because you have the best experience, here is a link for you to see, if you have concerns: first time here? Learn how Post and more  what is your exact model of laptop HP Envy?  Computers laptops HP - how can I find my model number, serial number or product?

  I understand that you put your laptop into sleep mode and back in your bag. When you back and has taken out, the laptop was very hot and it was a BIOS recovery.  It is stuck at 14% for several hours and the message not to turn off your computer. As the laptop bag, it is more likely overheated several would impair aeration and the ability of the portable computer to dissipate heat.  I suggest you try a hard reset.  HP Notebook PCs - performing a Hard Reset or forced Reset. Please keep me updated.

  If this helped you to solve the problem, click on "accept as Solution" told the post. "To show that you 'like', or are grateful for my post, please click on the" ""Twww.Mountainview.rsb.qc.ca Up ' below. If there is anything else I can do to help, please don't forget to let me know!

• HP Envy 5660: Failed to update Windows 10 thanks HP Envy 5660

  After the installation of the printer HP ENVY 5660 updates always display the error "• Hewlett-Packard - Company WSD multifunction printer, MFP, other materials - Null Print - 5660 HP ENVY series - error 0x800f020b". Even after the withdrawal of the unit and uninsatalling this error repeatedly, and update windows 10 is not coming. How to remove this error and how to install the printer without this problem?

  Hi @tstyam,

  Thank you for showing your interest in the HP Forums!

  I understand that you are experiencing this error "Hewlett-Packard - Company WSD multifunction printer, MFP, other materials - Null Print - 5660 HP ENVY series - error 0x800f020b". I'd be happy to help you with this.

  It seems that there is a driver on the computer. If you have just installed Windows or a device and the Device Manager has 'Unknown devices' or 'other devices '. This means that they are in a State of error or without no driver installed.

  To resolve this issue, remove the "unknown device" or "Other devices" and run Windows Update to fix the problem.

  1. Go to settings, then select devices.
  2. Click on connected devices.
  3. Click on Device Manager.
  4. Open Printers and then uninstall/remove/delete the "unknown device".
  5. Open the devices and then uninstall/remove/delete the "unknown device".
  6. Launch Windows Update to correct the problem.

  Don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  Reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

• HP Envy 17, N1L21EA: HP Envy 17 blocked Bios Update?

  From 26/02/2016, I try to install the upgrade of the SP74326 Bios for my HP Envy 17, laptop N1L21EA. Using the Assistant from HP Support, messages is simply that the installation has failed, I tried several times.

  When you directly download the SP74326.exe, Setup shows 3 options, the upper 1 "Update" option is always Bernard, with the message "BIOS update is blocked on this unit. The other options are backup options that work.

  It seems that my notebook does not want to be updated!

  No problem with the laptop itself or some other updates.

  Any idea?

  Ok.

  I would like to leave only if it works fine.

  Murphy's law applies to this.

  If it is not broken, and you try to fix it, bad things happening...

• dv6 7309tx wanted: HP ENVY DV6 7309tx BIOS update after the corrupt bios, SP68425 F.2D does not work

  The problem began with a blue screen after the updated copy on the road on machine of internal to external hard drive...

  After the reboot, the screen went white and CAPS LOCK has 2 flashes

  Device: HP dv6 7309tx envy

  Current BIOS: 22/01/2013 F.24 / 181E

  Downloaded SP68425 with F.2D since 08/2014

  insydehflash.exe in the package on a spare computer (no HP) does not support the extraction to USB, I will need to update the bios on device dead...

  Device is now in HP PC Hardware Diagnostics UEFI, where I can add usb and start to update...

  However, the raw after extraction of sp68425 bin file is not accepted...

  and I can't go any further with the tool insydeh sp682425 because it does not allow me.

  There is no real BIOS option the last update on the HP support who is crazy enugh...

  F.2d

  FTP://FTP.HP.com/pub/SoftPaq/sp68001-68500/sp68425.html download: ftp://ftp.hp.com/pub/softpaq/sp68001-68500/sp68425.exe

  Please help to send me the appropriate files or explaining how I can generate in a different machine than the one update has no boot?

  Thank you

  Hi all

  If the solution was done by a kind shop in Hungary, http://reballing.hu

  and a specialist in firmware http://vinafix.vn

  So apperently my BIOS has been corrupted that CAPS lock sign showed and it could have been rewritten with HP Diagnostics if HP could provide the RSA key for her...

  In this case it is not provided, you don't have that one other solution, to find a nice (as reballing.hu) repair shop, where the guys are nice enough to disassemble your computer, take the chip and write the data without the requirement of RSA software HP Diag using a writer BIOS correctly. You can also buy writers of the bios and the tools, but he could be uite costly and risky for you to do...

  So you have a repair guy, the only other thing that you might need to trust is the dump of the BIOS correct, please note that the supplied with the softpaqs .bin file is encrypted, so it must be decrypted, it is not an easy task, it worked for me too after awhile, but better to find a provider of bios (saves time for you as well and that is why HP is not willing to give it to you, you have two choices: make a work computer, and read the bios in this way (you must have the identical chip and content, so preferabily the same card mother or product)

  Or go to www.vinafix.vn and ask them to provide you with, these people are kind enough to explain how the thing works and what you need to write your own return data.

  So once that you set is not more than 30 minutes for a handy guy and as they work at the time, it is fairly cheap as well, it cost me 25 USD total (10 for bios) and 15 for the actual work done

  It's a shame that yu can not really find information about this threat, and also that it can happen to your computer at any time it seems that, always in waiting to see what caused, and if she came back or not... but as of now, I am pleased that the computer is back on!