HP ENVY 15 Notebook E1P04AV: HP ENVY 15 problem NVIDIA GEFORCE

I'm supposed to have NVIDIA GEFORCE graphics on my computer, but the vehicle has currently the Intel HD graphics running. So I tried to download and install the driver from the GUI, but then after I installed it, I got a popup that says that NVIDIA could not find graphics cards or equipment which corresponds to the driver.

I know for a fact that I don't have a card NVIDIA graphics in the computer, because there is a sticker on it, and nothing inside the computer has been tampered with.

Check if the graphics card in your device manager section has two knots like the image below.

If there is a single one (Intel only) then your PC is not just any other GPU. So don't try to install any other drivers.

Tags: Notebooks

Similar Questions

  • HP ENVY 15-j190nb notebook pc (J3S08EA) has no gpu NVIDIA GeForce GT 840 M?

    Hi guys, sorry for my bad English, but I need your help

    The specifications of laptop HP ENVY 15-j190nb (J3S08EA) gpu say "NVIDIA GeForce GT 840 M (2 GB memory DDR3 reserved)." But when I check the site of NVIDIA, or even Google, there is no such thing as the 'GT' 840M GeForce. Would it be possible they mean the NVIDIA GeForce 840 M card? So without the 'GT '?

    Please help this really bugs me

    fckthisssht wrote:

    Hi guys, sorry for my bad English, but I need your help

    The specifications of laptop HP ENVY 15-j190nb (J3S08EA) gpu say "NVIDIA GeForce GT 840 M (2 GB memory DDR3 reserved)." But when I check the site of NVIDIA, or even Google, there is no such thing as the 'GT' 840M GeForce. Would it be possible they mean the NVIDIA GeForce 840 M card? So without the 'GT '?

    Please help this really bugs me

    Yes you are right. Assumes that the features of HP people he has messed up

    But you can find your like this:

    GT, GTX

    Those who have been the suffixes that come after a card number (in the new cards they became prefixes), part of the confusion of naming which uses Nvidia.

    In short, two cards with the same number but a different suffix will be different in terms of performance, for example: 8800 ultra is faster than the 8800 GTX that is faster than the 8800 GT which is faster than the 8800 GS.

    It is an ordered list declining performance (even though there may be a few exceptions):

    Ultra / GTX +.
    GTX
    GTS
    GT
    GS/GSO
    THE

    You can't say that 8600 GTS is faster than the 8800 GS (it is in fact slower), because you have to compare the 2 cards with the same number.

    Hope this solve your problem,

    Thank you

    CLICK ON 'ACCEPT AS SOLUTION' IF THIS SOLVED YOUR QUERY, TO HELP OTHERS WITH THE SAME PROBLEM *.

    CLICK ON BRAVO IF YOU LIKE MY ANSWER *.

  • Envy 15 laptop: NVIDIA Geforce 840 M with HP Envy 15 Lapytop - works with Adobe Premiere Pro

    I had this HPEnvy a couple of days and wonder for how long is more. I use the laptop intensively for video

    Edition, often away from home. At first, everything was fine. Now, just a couple of days later, it will often start Premiere Pro with 'record and playback' options greyed out, even if the day before, it is not grayed out. When this happens, video playback in Adobe Premiere, he turns for a few seconds and then becomes very jerky and stuttery.

    I tried to update all THE drivers video card.

    I noticed that there are two video cards appears in Device Manager. "One is the NVIDIA Geforce 840 M, the other appears sometimes as ' Microsoft based *" and sometimes as Intel *. If there are two graphics showing?

    I know you tell me to Adobe, but I think that something happens BEFORE first gets a peek in.  The laptop seems slow when loading any software. Just for the record, I uninstalled first Pro CC and have restored the laptop is "as delivered" condition. It took time, of mcourse, but didn't improve questions.

    At the current stage at the present time, I can't use the envy 15 it is recommended locations.

    I would be grateful for any advice as to why this is happening. Someone at - it of another more it?

    Thank you very much for your time and expertese.

    Alan S.

    It's been a while but my suspicion of power supply are correct. I replaced the power supply and it is reliable works as expected. I don't know what was wrong with the original, low voltage, main ripple?

    Thanks for your time. Problem solved.

    Alan S.

  • HP Envy 17 Notebook PC TS left hinge problem

    Left hinge on my HP Envy TS 17 Notebook PC pushes the lower lid of my laptop open whenever I open and close my laptop. My desire is quite recent and it is still under the one year warranty.

    Hello

    Yes.  MY problem is solved.  Company and I got the replacement unit successfully.

    Note: If you have a lot of software installed, especially of VMs on your current laptop, so my personal advice would be to get the repaired unit, I came across the problem to reactivate the license think little software, I do several facilities and refuse activation.   However after talking to the licensing issue has been resolved, but it consumes a lot of time.

    However, if the activation of the license is not a problem for you then unit replacement is better.

    Concerning

    PS. but in the new laptop also, I always get a little tic noice when I open and close the laptop from the left hinge.   That is why I it opens very slowly.  I have just pray and hope that it does not break.  because I get 2nd replacement.

    --------------------------------------------------------------------------------------------------------------------

    Hi JigneshDesai,

    mjhuang (honor student) released a new response Notebook Hardware on 27/09/2014 23:47

    Subject: Re: HP Envy 17 Notebook PC TS left hinge problem

    This answer solve your message or question?

    If so, then share the good news! Inform others that this response was helpful in accepting this solution.
    You can also show your appreciation by giving congratulations.

    We appreciate your comments. It's what keeps our community a useful and dynamic place for our members.

    Thank you for being a Member!

    Forum HP's Support team

  • HP Envy 14 w / Nvidia GTX 950 m: degradation of Gaming Laptop HP Envy

    Hello

    I recently bought my laptop HP Envy a year ago and I used it moderately for school and work. I made sure to buy the GTX included 950 m graphics card so I could play some of my steam games and I'm just starting to achieve a degradation in the performance of my laptop. I do not speak of degradation when I bought the laptop so far but I'm not talking about just playing a game and having amazing performance (graphics on medium-high and about 50 to 60 images per second), but after like 5 minutes of play he is slowly starting to soak as 14-15 fps. In particular, I tried playing Overwatch today and had an amazing gameplay for the first 5 minutes, but I dropped up to 15 images/s and it's hardly playable. I tried to change the resolution and that seemed to have fixed however the same problem happened five minutes again.  I have no idea why my laptop it would especially since I have not really used a lot for the game this year and I'm sure to maintian computer performance by updating the drivers, reboot often and defraging.

    CrazyAce

    I think that I finally found a solution to the problem. I was on my laptop of friends (which is similar to mine) and noticed that she had not updated its geforce experience. So I've updated for her and she began to notice the same problems I had. It turns out that this experience of NVIDIA GeForce is not really necessary for the games because it does not include the graphics driver. So as soon as I uninstalled, all started to run surprisingly. Time just in the better together performance and faster startup, no fps drop. Who would have known to try to uninstall the software, only that I have to refer to the graphics card to make my graphics card will be smoother and does not affect my computer.

    Thanks for the time to help out me if. I'm so happy that I figured this out.

  • HP envy 700/214: Hey is the Nvidia GeForce gtx 750 ti FTW work in the Hp envy 700-214.

    Hey is the Nvidia GeForce gtx ti 750 FTW work in the Hp envy 700-214.

    TGGooch123, welcome to the forum.

    Yes, it should work without any problems.  I would measure the rear plate i/o on the front of the case to ensure that it enters the space, however.  I would measure the rear plate i/o on the front of the case to ensure that it enters the space, however.  I suggest to buy an EVGA card.  They make very good products and very good Technical Support (1-888-880-3842).

    Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

  • External monitor of higher resolution for Envy 17 t w/GeForce GT 740 M?

    I have an envy TouchSmart 17 t-j100 Quad edition with a Nvidia GeForce GT 740 M graphics card. It has only a HDMI port, no DisplayPort, DVI, VGA port no port.

    I bought a HP ZR2740w 27 "monitor, but apparently the desire cannot drive a very high resolution (2560 x 1440) monitor via HDMI port.

    What is the display max resolution that want support for an external monitor via its HDMI port?
    I looked for it in the product specification, but do not see it.

    Thank you...

    Whatever the graphic subsystem as UMA, 740M, 750M, or 840 M. It HDMI v1.4 output supports up to resolution of 1920 × 1080 @ 60 Hz.

    If you have any other questions, feel free to ask.

    Please click the White Star of KUDOS to show your appreciation

  • HP 15-d043se Notebook PC: problem in installing driver for nvidia geforce 820 m

    Hi guys

    I have HP 15-d043se Notebook PC with windows 7 64 bit and I have error to install the graphics driver from nvidia geforce 820 m, I downloaded and installed all the drivers (including intel graphics hd 4000) driver from the official site of hp support here as you can see in the image below:

    but when I try to install the nvidia driver I get this error:

    I also tried to download the drivers from the nvidia official site, even changed the OS of windows 10 for windows 7, but no luck... Help, please

    Good news! I just sloved question by updating Bios graphics card appeared in as '3D video controller' Device Manager, then I installed the nvidia driver and we installed seccessfully! )

  • Dear Sir I have toshiba l300 notebook now, I had some problems at the start that a time window is error and posted massage window stopped work go on line chek problem and restart when I restart then run ok that's my question ok

    Dear Sir I have toshiba l300 notebook now, I had some problems at the start that a time window is error and posted massage window stopped work go on line chek problem and restart when I restart then run ok that's my question ok

    Hello

    display the appropriate error message.

    the error codes?

    Try the clean boot procedure to find the application or program causing the problem.

    http://support.Microsoft.com/kb/929135

    all the best!

    Addison

  • HP ENVY Notebook PC m6: biometric device problem

    After I've updated for Windows 10, if I leave my active biometric device, my mouse pointer/cursor continuous flickering as if to show the system is busy.

    I'm on the latest version of the driver for my hardware. Now, I am unable to use my fingerprint as my password.

    The only way I knew to prevent this was to turn off my biometric from the Device Manager.

    So I'm more able to make use of my material, even if its there on my laptop.

    Please help me.

    HP Simple pass seems to work, but the problem is that whenever the biometrics is selected, the mouse pointer continues to flicker.

    Hi @Ashkal052,

    Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!

    I stumbled upon your post on the laptop and wanted to help you! I looked in your question about your m6 HP ENVY Notebook and questions with the Simplepass works not properly. I suggest you uninstall fingerprint driver or reinstall the version updated driver and HP SimplePass ultimate installed and reinstalled the latest version for Windows. Here is a download for the reader of fingerprints for Windows 10. This download sp71729.exe should work for you.

    Please let me know how it goes.

    Thank you.

  • HP ENVY 17 Notebook PC j-082eg: sound problem

    I can't hear any sound in my pc! No music and no sound effects. She left of windows media player when he t couldn't read music files. The audio so that peripheral says windows has a problem and then ask to turn off the audio device I click ok and then no sound in anything please don't help

    Follow this link for the removal instructions: https://msdn.microsoft.com/en-ca/library/windows/hardware/ff553572%28v=vs.85%29.aspx

    to reinstall the driver: http://support.hp.com/us-en/drivers and enter the requested information and download the new drivers for your audio device.

    Install it and restart your pc.

  • HP ENVY 15: Problem with audio after the Windows 8.1 update

    Hi, I'm on HP ENVY 15 notebook PC and I updated my windows 8 to 8.1. Until a few days back, everything was fine. However, now, I have no audio through speakers or head phones. Can someone help me please to solve this. Thank you.

    Product number: E4N80EA #ABZ

    Hello

    Try the following.

    Download IDT Audio Installer on the link below and save it in your downloads folder.

    http://ftp.HP.com/pub/SoftPaq/sp63501-64000/sp63555.exe

    One time finished, open windows control panel, open Device Manager and open sound, video and game controllers.  Right click on the IDT device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

    When you are finished, download and reinstall the Chipset driver from the link below.

    http://ftp.HP.com/pub/SoftPaq/sp63001-63500/sp63408.exe

    Once the reinstallation is complete, shut down the laptop by pressing the SHIFT key when you click Shutdown to temporarily prevent a hybrid boot.  Then disconnect the AC adapter and then remove the battery.  Press and hold the Power button for 30 seconds.  Reinsert the battery and plug in the AC adapter.

    Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu.  Press f5 to load the default values (sometimes it's f9, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

    Allow Windows to fully - charge it will automatically load an audio driver, but let just this complete.  Then open your download folder, right-click on the IDT Installer and select "Run as Administrator" to launch the installation.  Once this done, do a right-click the speaker icon in the taskbar and select playback devices.  'Speakers and headphones' left click once to highlight, and then click the Set Default button - check if you now audio.

    Kind regards

    DP - K

  • HP Envy 15t: problem of HP TrueVision camera after upgrade to a different version of the factory Windows 8.0

    Webcam is dead.  During the launch of software or application, the light (hardware access) but will immediately switch with loop No.-camera photo/camera.

    It does NOT work.

    Try opening Windows camera - and I can look at device manager freak out and flash camera, without camera, camera, no camera... over and over.  If I turn off the device, then the application stops sending looping error messages and said without a camera. (yes I know I disabled it, but the loop tells me that it is a specific driver problem).

    I uninstalled the device, permis allowed Windows to detect, yet install base driver. Now instead of HP TrueVision HD, in Device Manager it detects USB video device.

    I need to find a COURSE working DRIVER for HP TRUEVISION HD WEBCAM

    I visited every thread on this forum, visited each Microsoft talked to YouCam, thread AND to HP, I was told to factory reset my laptop, but after 4 times by HP USB restore factory reset did not work.  I didn't want to send in my laptop, it is a driver issue, which is quite clear.

    Where can I find a driver, no - only the driver software?

    Thank you.

    Hi @petako,

    Thank you for your super fast response. I review the post. Please try to install a compatible driver from this link: http://support.hp.com/us-en/drivers/selfservice/hp-envy-15-as100-notebook-pc/12499192/model/13386595#Z7_3054ICK0K8UDA0AQC11TA930C7

    Go to "Input devices" and "HP TrueVision Full HD (FHD) RGB - IR Webcam Driver" from the link to download and install it.

    Need a compatible driver for your webcam.

    Please visit this link to install the Youcam software: http://support.hp.com/us-en/drivers/selfservice/hp-envy-15-j100-quad-edition-notebook-pc-series/6521359/model/6521361#Z7_3054ICK0K8UDA0AQC11TA930C7

    Go to "Multimedia software" and "Software Cyberlink YouCam" from the link given below to download and install it. Link: http://support.hp.com/us-en/drivers/selfservice/hp-envy-15-j100-quad-edition-notebook-pc-series/6521359/model/6521361#Z7_3054ICK0K8UDA0AQC11TA930C7

    I hope this helps! Please let me know how it goes. If it helps, please mark this message as "'Accept as Solution". " If you need help, let me know and I will gladly make all that I can to help. If you want to say 'Thank you' for my efforts help, click the ' Thumbs Up ' to give me a Kudos.

    Take care and have a wonderful week ahead.

  • Laptop HP Envy M6: problem with hinges on the m6 HP Envy laptop

    I bought the laptop M6 Envy in 2014 for my daughter and it is now coming apart at the hinges of the normal level

    wear and back, she of afraid that if she continues to open & close it may collapse, but to use for school, please advise if there is a recall on this product or how can I fix it.

    @Alexenvy

    I brought your question to the attention of a team within HP. They are likely to ask for information from you to get your information or product serial number. Please search for a private message from a contact HP identified. Also, remember not to publicly display personal information (serial numbers and information).



    If you are unfamiliar with the operation of the function of the Forum, private messages you can learn it all here.



    Thank you for visiting the Forum from HP Support.

  • HP Envy 7640: Problem selecting a page scanned in on a HP Envy 7640

    I'm on Windows 10 and have a HP Envy 7640 printer which I use for scanning. I was able to scan documents and photos. I have the latest drivers installed.

    My question is when you scan a document of several pages how to choose to work on a single page. For example, if I scanned in 5 pages, how can I go back and delete page 2? In the lower left corner is select it all and deselect a button. But the button deselect Disable all pages and select it as all button selects all pages. I want to choose only a given page to work on.

    If I scanned in 5 pages and the last page I want to rotate, rotation turn button as all 5 pages not only on the last page.

    I before I was on Windows Vista with this printer and scanning software made it easy to work individually with any already digitized in page.

    Hello

    Thank you for using the HP Forums.  You mentioned that you have installed the drivers, HP FULL feature software driver?

    If this isn't the case, you can download and install the software COMPLETE features of HP printing for your operating system:

    http://support.HP.com/us-en/drivers/selfservice/HP-envy-7640-e-all-in-one-printer-series/6617267/model/6617268#Z7_3054ICK0K8UDA0AQC11TA930C7

    Once you have downloaded and installed the software, FULL of features, you will be able to print and scan.

    Concerning your questions about scanning, followig resources will be able to help:

    Scanning for Dummies
    http://h30434.www3.HP.com/T5/scanning-faxing-and-copying/quick-guide-to-your-scanning-needs/m-p/5625126

    Watch the videos of "Scan multiple pages.

    Hope that helps.

Maybe you are looking for