HP Envy 15 TS (C8P47AV): can't get Realtek GBE onboard Ethernet RTL8168 go above 100 Mbps

I've only used my HP Envy TS 15 (C8P47AV) wireless and recently got a wired connection using CAT7 at my desk on the 2nd floor. I can't exceed 100 Mbps and it is extremely frustrating! I've read tons of things on the web and can not find something that helps! My WiFi gets a faster than the Ethernet cable speedtest. I see this change once! That's when I changed the cable that I have my router on and noticed he went to 300mbps and things flying. However him unplugging and plugging it into which he disappeared port. It's almost like the old bargaining hung. In any case change this to force it to work? I tried gigabit forced, you name it, any setting changes you fixed! I even tried to plug directly into the router port and that it did not. I have other devices that work fine with this same CAT7. I'm SOL with this version of HP laptop?

I found the problem! After reading each thread only forum I could find on Google. Someone suggested to see if there was a brooch twisted in the connector and of course the middle one was bent! I don't know how it happened as I've only used wifi. It's a little tricky but I folded it back turned and I was ready to go! The chalk of it as not a cable problem or driver!

Tags: HP Desktops

Similar Questions

  • Hi, how can I get a picture of 492kb to be just 100 KB? Q thanks

    Hi, how can I get a picture of 492kb to be just 100 KB? Q thanks

    An image, such as Irfanview program, allows to change the quality/resolution.

  • How can I get a horizontal menu widget to display the 100% width?

    I created a horizontal menu with uniform spacing and tended to each side. I can't get the red mark appears on the left side, but he appears on the right. No matter what I do, the menu continues to show short on the right side of my screen in preview mode.

    Anyone know how to do properly? Anyone else had any problems with it?

    Thank you!


    We are aware of this limitation with the Menu and the Widgets Panel and hope at the same address in the future.

    Thank you


  • HP Envy Phoenix 850-065se: can't get Logitech Z906 5.1 THX Surround speakers to operate on Envy Phoenix 850se

    Just got a new 850se want Phönix and get all my fixed gear and functioning before joining the Windows 10 unit (under construction factory of Windows 7).    This product has Realtek HD Audio hardware and software of Bang & Olufsen.  The two configuration screens to test the connected speakers, but only produce a sound to two loudspeakers, which are connected to taking 'green '.  Bang & Olufsen config display 3 speaker inputs (6 channels) must be placed in the catch of green, pink and blue.  Realtek configuration screen appears to show that only the 'green' Jack is used for the output from the speakers.

    I want to get that last piece of hardware working before you perform the upgrade to windows 10.

    Please advise on the things to inspect and options to activate the speakers 5.1 surround to work.

    Thank you


    Find a setting that works.

    On the Z906 Control Panel, disable the option NO EFFECT (3D, 4.1, 2.1) and all stakeholders work as needed in the right order (position).

    Also for reference, a good connection has been determined as follows:

    Green (subwoofer) to green (PC)

    Rose rose (PC) (subwoofer)

    Black (subwoofer) to blue (PC)

    Thanks to all respondents.


  • How can I get rid of the yahoo logo superimposed above the tabs?

    My machine had to be reimagee, and when I reloaded Firefox, there is now a Yahoo! logo at the top right of the screen image to the left of the reduction box, above the tabs. I HATE IT. Please tell me how to get rid of this so I can't switch to Safari or Chrome.

    You are welcome

  • How can I get all of the Office to appear above the task bar?


    On Saturday, August 14, 2010 18:36:51 + 0000, Ronnie Vernon [MVP] wrote:

    Ronnie, this isn't my experience. On all my Windows 7 computers, if
    you move a program window open to the taskbar and beyond, she too
    passes under the taskbar.

    Ken Blake

    Hi Ken

    It is also normal, as Nathan described. You can 'move' a window behind the taskbar.

    What I was describing is the default when you open a new window maximized. It should extend from the top of the screen to the top of the taskbar and not behind the taskbar.

    Thank you and sorry for misunderstanding you. Yes, I agree.

    If you have set on auto-hide the taskbar, this means a slightly larger magnified window, because it extends all the way to the bottom of the screen and if you appears the taskbar then it will cover the bottom of the open window.

    Kind regards

    Ronnie Vernon MVP


    Ken Blake

  • DW CC sensitive site, Image problem, how can I get my image to stretch in the width 100% in the div container (wrapper)?

    I have a HomeHeader (upper Div) homebody (body div), 4 low box divs (not important). Im trying to get my homebody (body div) to stretch 100% width on the container as My HomeHeader (upper div) did. The two albums div and body divs are IMAGE backgrounds!

    Capture 1.PNG

    Now, I did something interesting that is, changed my homebody (body div) of the background color in the Red image background and it streched:

    Capture 2.PNG

    I don't want a solid color! I want the image that I designed in photoshop CC. I don't understand how I could get my div image to stretch, but not the image of the body. Help, please!

    PS. This is a copy of my CSS


    @media only screen and (min-width: 769px) {}


    Width: 100%;

    margin: 0;

    Clear: none;

    padding: 0;

    float: none;



    background-image: url (.. / WebDesign-assets/images/TopFooterH.jpg);

    height: 61px;



    background-image: url (.. / WebDesign-assets/images/BodyH.jpg);

    height: 653px;



    Width: 24.1758%;



    Width: 24.1758%;

    margin left: 1.0989 per cent;

    Clear: none;



    margin left: 1.0989 per cent;

    Clear: none;

    Width: 24.1758%;

    height: auto;



    Width: 24.1758%;

    margin left: 1.0989 per cent;

    Clear: none;



    left margin: 0;



    display: none;



    Please help once again!

    You realize that will only look great on your screen, right?    Background images don't re - adapt to windows.  So for people on larger or smaller screens, it won't have the same experience.

    You could significantly reduce bandwidth by using a smaller picture with this method.

    Resizable background image full Page

    Nancy O.

  • How can I get ALL of my PDF files to open 100%

    I have the latest (horrible) version of Acrobat Reader DC, (Mac 10.10.5) and find this horrible version. All PDFs open to 56% to 65% of the size and I have to waste a lot of time to manually change each manually open pdf. I hope that they make this drive because it is also very difficult to read.

    I checked the preferences and this website for instructions, nothing helps.

    Thanks for the tips.



    Edit-> preferences-> Page Display-> default layout and Zoom (Zoom: 100% Drop)

    Please check the steps mentioned and see if your query is corrected.


    Sukrit diallo

  • Where can I get the latest version of Safari for my computer portable 64-bit of Windows 10?

    What is the latest version of Safari, I can get for my laptop Windows 10 64 bit HP Envy?

    Where can I get this version of Safari for Windows 10 64-bit Windows?

    Sorry, is no longer Apple develops Safari for Windows.

  • HP Envy: I can't get my printer want print from my iPad or desktop.

    I can't get my printer to print from my computer. I reinstalled, does things for troubleshooting and can print ePrint but no Facebook, email or whatever it might be saved. Please help

    Hi @Dollgirl,

    Thank you for joining the HP Forums!

    I noticed your post that you can't get your HP Envy to print from your iPad or your office. I am pleased to see that for you!

    What is the model number for your HP Envy? How can I find my model or printer number?

    What is the operating system on the desktop, Windows or Mac? What version? http://www.whatsmyos.com.

    To confirm that the hardware of the printer is functional, you are able to make a copy with the glass of the scanner of the printer? Copy of Documents.

    In the meantime, please try a hard reset by following the steps in this post, How to perform a hard reset, by @Rich1. It is important that the power cable from the printer is plugged directly into the wall outlet, not a surge protector.

    Do not forget to return to this topic and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

    I hope hear from you soon!

  • How can I get my my HP ENVY 4520 ALLIN ONE TO PRINT


    Go to system, then print, scan or print and fax Preferences (depending on the version of the OS) and at the bottom, click the button "+". I would like to know if it works.

    Good luck


  • I have the HP envy window8 and monitor AOC 22 "Led. I can't get all the colors to be displayed.

    Original title: color monitor

    I have the HP envy window8 and monitor AOC 22 "Led.  I can't get all the colors on the screen. The colors are bright that I receive, but can't get the yellow, green, purple. etc. I followed in the Help menu for calibration of the colors without success by the buttons on the monitor in windows.

    Hi Ellen,.

    (a) you use HP ENVY laptop or desktop computer?

    (b) what is the model number for HP ENVY and monitor AOC?

    (c) what kind of connector do you use to connect the monitor?

    (d) have you tried to use the other cable and check if works?

    You may experience this problem if the connections between your computer and your monitor is loose or if the drivers of graphics cards is corrupted. Try these methods and check if that helps:

    Method 1: I suggest you to update the latest drivers for the graphics card for Windows 8 and check if it helps:


    Method 2: Visit the COA Web site and install the latest drivers by selecting the drivers of the AOC monitor for your model and see if it helps:


    See the documentation for your monitor and see if you can find the menu to restore default settings. If the problem persists I suggest you to contact the manufacturer (AOC) for assistance.

    Also refer to this article: get the best display on your monitor


    Hope this helps, if you need help on Windows let us know we will be happy to help you.

  • How can I get a new serial number for my 11 elements that I want to load on my new Hp envy touchsmart pc running Windows 10?

    How can I get a new serial number for my 11 elements that I want to load on my new Hp envy touchsmart pc running Windows 10?


    «If you have purchased a license for Photoshop/Premiere elements 11 and saved in (http://adobe.com), that you can sign in here and get the license key of series under "" manage account > Products and Plans > my products "»

    If you purchased a volume for Photoshop/Premiere elements 11 license, then you can connect to Volume Licensing Adobe website (http://licensing.adobe.com/) to access the series to activate license key product. You can access the link as follows to download the installer of Photoshop or Premiere elements 11.

    Download Photoshop Elements | 10, 12, 14, 11, 13

    Download Adobe Premiere Elements 14, 10, 11, 12, 13

    You can also access the link as follows for details how to access the serial key.

    Find the serial number of your Adobe product quickly

    Thank you.

  • Envy 15 laptop t: How can I get rid of messages from triangle yellow if I don't want the update?

    I get messages in the form of a yellow triangle with an exclamation point, and when I click on it I found supposed updates. How can I get rid of these so I do not understand all the time reminders?

    Hello @nininger,

    Thanks for the quick response!

    In your original post, it was not indicated if you receive updates via the HP Support Assistant, or the update of Windows.  If you receive messages via the HP Support Assistant, you should be able to go into the tool and change the way you receive notifications.  You can consult the following document to help you, if necessary:

    HP computers - using HP Support Assistant (Windows 10, 8, 7)

    Kind regards!

  • How can I get the correct product key for my sleekbook want PC4

    How can I get the correct product key for my sleekbook desire 4 PC


    As mentioned in your other post you can get it from Microsoft with your money:


    Kind regards.

Maybe you are looking for