HP Envy 17-3077NR - bus PCI 10, device 0, function 0 (Code 28)

Similar Questions

• HP COMPAQ 6200 PRO SFF PC: Bus PCI 0, device 31, function 3 DRIVER

  I HAVE A PC HP COMPAQ 6200 PRO SMALL FORM FACTOR I KEEP GETTING MESSAGE ' CAN FIND DRIVER FOR CONTROLLER of BUS SM THE DRIVER IS: PCI bus 0, device 31, function 3 WHERE CAN GET THIS DRIVER? Thank you

  Hello:

  Download, unzip and run the file setup.exe from the link below... then reboot the PC.

  https://Downloadcenter.Intel.com/download/20018/INF-Update-utility-primarily-for-Intel-6-5-4-3-900-series-chipsets-zip-format?product=1145

• Bus PCI 5, device 9, function 3

  I recently updated my card wireless, hard drive and RAM, but even after installing the drivers, it indicates that there are drivers missing.

  Base system device PCI VEN_1180 & DEV_0843 & SUBSYS_30B5103C & REV_01\4 & 3A3249AB & 0 & 4 to 80 that the drivers for this device are not installed.
  Base system device PCI VEN_1180 & DEV_0592 & SUBSYS_30B5103C & REV_0A\4 & 3A3249AB & 0 & 4B 80 that the drivers for this device are not installed.
  Coprocessor PCI\VEN_10DE & DEV_0271 & SUBSYS_30B5103C & REV_A3\3 & 13C0B0C5 & 0 & 53 that the drivers for this device are not installed.

  (These codes are found under the information system, but not in "Other devices")

  Im running on a hp Pavilion dv2000, could you guide me for these specific drivers so I left the 'warning' annoying error... ? Thank you advance.

  Hello:

  You need these drivers...

  Coprocessor:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-46259-1&cc=us&DLC=en&LC=en&OS=2093&product=3177437&sw_lang=

  X 2 base system device:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-46445-1&cc=us&DLC=en&LC=en&OS=2093&product=3177437&sw_lang=

• Bus PCI 5, device 0, function 0

  network controller its lack

  Hello Joe,

  Thanks for posting your question on the Microsoft community.

  We need more information about the issue so that we can help you better.

  What is the brand and model of your computer?

  Thank you for details on the issue.

  This problem may occur if the network driver is missing or not installed.

  I suggest you update to the computer manufacturer's Web site network driver and check the issue.
  Reference:
  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows/Update-driver-hardware-ISN

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Update driver for the location of the controller bus PCI 5 network, device 0, function 0 code 28

  location PCI bus 5, device 0, function 0 code 28

  Hello Mark135,

  Thank you for your message.  Go to the Web site of the manufacturer of your computer and download/install the latest network driver for your computer operating system.  Please let us know if it did or did not help to solve your problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Satellite M70-131: BUS PCI 6 - DEVICE FUNCTION 4-4, driver required

  Hi all
  I have a Toshiba Satellite M70 - 131 (model No. PSM70E - 01500RAR, Serial No. 16185917 K)
  I use windows XP Professional.
  I could not install the driver of a fo the below mentioned PCI device that is listed as follows

  "PCI DEVICE BUS 6 - FUNCTION 4-4.

  In Device manager a question mark '? ' to come up with a description "PCI DEVICE".

  I have already installed the Modem, Lan Wireless, its display and IEEE1394

  So please help me to solve this problem. I need the answer for the following queries

  (1) this PCI card uses to which device?
  (2) how can I know the exact driver software
  (3) why the name of the device (for example: modem,) does not appear
  (4) how do I know which device need me to install

  your immediate support is very appreciated

  Concerning
  PETER

  Hello Peter

  I don't really know what you are missing, but the fact is that on the Toshiba download page you can find the document Instructions of facilities. All you need to do is install all the things listed here and in the exact order. After having done that, everything should work well.

  I M70 - 159 and using the same document I installed Windows XP Home edition successfully.

  BTW: I'm not sure at 100%, but maybe you lack driver for 5 in 1 card reader (driver cardbus).

• Unknown devices (PCI bus 9, device 9, function 2, function 3)

  HP Pavilion dv6699ed

  After a clean install of Windows 7 Ultimate 32 and drivers/software updated for the quick launch buttons and fingerprintdevice, I still 2 unknown devices:

  Bus PCI 9, device 9, function 2

  Bus PCI 9, device 9, function 3

  For both devices, it shows that the drivers are not installed.

  Can you help me by saying what are the devices and drivers, I need to install?

  Thanks in advance.

  Frans

  Message edited by cowkof on 01/12/2009 09:29
  Message edited by cowkof on 01/12/2009 09:58

  Install the HP Vista card reader driver for your model to solve the problem with the Base system device:

  Ricoh 5 - 1 card reader driver here

  When there's some sort of problems with installing and then try to run in Vista compatibility mode.

  Resources:

  How to run a program in Compatibility Mode in Windows 7

  Make older programs in this version of Windows

• Driver for old parallel port; This device has a problem: Code = 28 (0x1C)

  We organize a Dos based Windows 98 application and I need to find a driver for the integrated parallel port. The motherboard is an ASUS P5GD2-TMX/S. Both the local provider and ASUS only provide XP and more drivers for the motherboard. How can I determine the manufacturer of the parallel port and download the driver directly from their site? I done this before for the serial port and downloaded and installed a Sunnix driver, which worked.

  I did some research on the North Bridge, South bridge and the Super i/o chip set, but to no avail. Here is a copy of the output of sysinfo32.

  [Peripheral problem]

  Unknown device
  Unknown
  This device has a problem: Code = 28 (0x1C)
  The drivers for this device are not installed correctly. To install the driver
  for this device, click the driver tab, then click on set to update driver.
  The registry key: HKEY_LOCAL_MACHINE\enum\ACPI\ * INT0800\0
  Alloc resources: logical Configuration 0
  Memory address range: Base = xFFB80000 End = xFFBFFFFF
  Forced resources: None
  Start resources: logical Configuration 0
  Memory address range: Base = xFFB80000 End = xFFBFFFFF
  Filtered resources: None
  Core resources: logical Configuration 0
  Memory address range: Base = 00000000 00000000 Min End = x x = xFFB80000 Max = xFFBFFFFF
  Driver: Driver is not installed

  Standard 101/102-key or Microsoft Natural Keyboard
  Keyboard
  This device has a problem: Code = 27 (0x1B)
  System failure: try changing the driver for this device. If this does not work,
  see the documentation for your hardware.
  The registry key: HKEY_LOCAL_MACHINE\enum\ACPI\ * PNP0303\0
  Alloc resources: None
  Forced resources: None
  Start resources: no
  Filtered resources: logical Configuration 0
  IRQ: mask 0: x 0002
  IO range: Base = x 0000 End = 0000 Min = Max = x Alias 0060-0060 x x = x 00, decode = x 00
  Base = x 0000 End = 0000 Min = Max = x Alias 0064-0064 x x = x 00, decode = x 00
  Core resources: logical Configuration 0
  IRQ: mask 0: x 0002
  IO range: Base = x 0000 End = 0000 Min = Max = x Alias 0060-0060 x x = x 00, decode = x 00
  Base = x 0000 End = 0000 Min = Max = x Alias 0064-0064 x x = x 00, decode = x 00
  Driver: Keyboard\0003
  Driver date: 23/04/1999
  Driver: idvkd.sys
  File size: driver not installed
  File date: driver not installed
  Driver: hidparse.sys
  File size: 44368 (0xAD50)
  File date: 23/04/1999-22:22
  Legal name: Microsoft Corporation
  File version: 4.10.2222
  Driver: hidclass.sys
  File size: 23520 (0x5BE0)
  File date: 23/04/1999-22:22
  Legal name: Microsoft Corporation
  File version: 4.10.2222
  Driver: hidvkd.sys
  File size: 5088 (0x13E0)
  File date: 23/04/1999-22:22
  Legal name: Microsoft Corporation
  File version: 4.10.1998

  PCI card
  Unknown
  This device has a problem: Code = 28 (0x1C)
  The drivers for this device are not installed correctly. To install the driver
  for this device, click the driver tab, then click on set to update driver.
  The registry key: HKEY_LOCAL_MACHINE\enum\PCI\VEN_8086 & DEV_2668 & SUBSYS_81A71043 & REV_04\BUS_00 & DEV_1B & FUNC_00
  Alloc resources: logical Configuration 0
  Memory address range: Base = xD20C0000 End = xD20C3FFF minutes = x 00000000 Max = xFFFFFFFF
  Forced resources: None
  Start resources: logical Configuration 0
  Memory address range: Base = xD20C0000 End = xD20C3FFF minutes = x 00000000 Max = xFFFFFFFF
  Filtered resources: None
  Core resources: logical Configuration 0
  IRQ: mask 0: xFFFF
  Memory address range: Base = xD20C0000 End = xD20C3FFF minutes = x 00000000 Max = xFFFFFFFF
  HW revision: 004
  Driver: Driver is not installed

  Universal Serial Bus PCI
  Unknown
  This device has a problem: Code = 28 (0x1C)
  The drivers for this device are not installed correctly. To install the driver
  for this device, click the driver tab, then click on set to update driver.
  The registry key: HKEY_LOCAL_MACHINE\enum\PCI\VEN_8086 & DEV_265C & SUBSYS_265C1043 & REV_04\BUS_00 & DEV_1D & FUNC_07
  Alloc resources: logical Configuration 0
  Memory address range: Base = xD20C4000 End = xD20C43FF minutes = x 00000000 Max = xFFFFFFFF
  Forced resources: None
  Start resources: logical Configuration 0
  Memory address range: Base = xD20C4000 End = xD20C43FF minutes = x 00000000 Max = xFFFFFFFF
  Filtered resources: None
  Core resources: logical Configuration 0
  IRQ: mask 0: xFFFF
  Memory address range: Base = xD20C4000 End = xD20C43FF minutes = x 00000000 Max = xFFFFFFFF
  HW revision: 004
  Driver: Driver is not installed

  PCI system management bus
  Unknown
  This device has a problem: Code = 28 (0x1C)
  The drivers for this device are not installed correctly. To install the driver
  for this device, click the driver tab, then click on set to update driver.
  The registry key: HKEY_LOCAL_MACHINE\enum\PCI\VEN_8086 & DEV_266A & SUBSYS_266A1043 & REV_04\BUS_00 & DEV_1F & FUNC_03
  Alloc resources: logical Configuration 0
  IO range: Base = x End = x051F minutes = x 0500 0000 Max = xFFFF Alias = xFF, Decode = x 00
  Forced resources: None
  Start resources: logical Configuration 0
  IO range: Base = x End = x051F minutes = x 0500 0000 Max = xFFFF Alias = xFF, Decode = x 00
  Filtered resources: None
  Core resources: logical Configuration 0
  IRQ: mask 0: xFFFF
  IO range: Base = x End = x051F minutes = x 0500 0000 Max = xFFFF Alias = xFF, Decode = x 00
  HW revision: 004
  Driver: Driver is not installed

  The motherboard seems to be Intel 915P chipset.

  Don't know if it will help, but try installing the software Intel(r) utility V6.0.1.1002 of Installation for Windows 2000/XP/2003 (under Win2K - others) for P5GD2 motherboard from the following link that appears in support of Windows 98 Second edition:

  http://www.ASUS.com/motherboards/P5GD2/HelpDesk_Download/

  Then restart the computer.

• PCI bus 0, device 2, function 1

  Hello

  I have a problem with my video controller device driver after installing windows 7 (from windows xp)
  
  information about the location: PCI bus 0, device 2, function 1
  
  Hardware ID: PCI\VEN_8086 & DEV_2792 & SUBSYS_3081103C & REV_03
  
  Full name: other devices / unknown device
  
  My laptop is: Hewlett Packard Pavillion dv 4000 (Ek919EA #ABH)
  
  Properties: The drivers for this device are not installed. (Code 28)
  The installation failed because a function driver was not specified for this device instance.
  Please help me to find and download
  Thank you

  Hello:

  Download and run this file.  You will probably get an error not supported operating system.

  FTP://ftp.HP.com/pub/SoftPaq/sp34501-35000/sp34749.exe

  Conclusion of any windows error.

  Go to Device Manager and click on the device video controller requiring driver.

  Click the driver tab.  Click on set to update driver.

  Select her browse my computer for driver software option and find the folder of the driver that was created when you ran the file.

  This file will be located in C:\SWSetup\sp34749.

  Make sure that the include subfolders is selected and the driver should install.

  Then, restart and graphics need to be working very well.

  Not that Windows Aero is not supported on this model graphics card.

• missing driver, other pci bridge device, compaq presario

  model SR5030NX. OS = Vista Home Basic.mising driver for any other pci bridge device.

  When I bootup error message appears, I tried to find pilot with search without success. I don't know what is the pci bridge device, (it might be all that is in the pci slot)? I did not open the case again. I heard in the Device Manager under other pci bridge device properties on the general tab.

  TYPE A.DEVICE: OTHER DEVICES

  B.Manufactuer: UNKNOWN

  C.Location: The bus PCI 2, function 0

  Device status

  This device is not configured correctly

  There is no driver selected for the item or a set of device information. (Reinstall driver does not help.

  The tab Dnder driver

  A.Driver provider: UNKNOWN

  BRIVER DATE NOT AVAILABLE

  C: VERSION OF THE DRIVER NOT AVAILABLE

  NOT DIGITALLY SIGNED DIGITAL SIGNER

  THE TAB DETAILS, DEVICE PHYSICS OBJECT NAME

  \DEVICE\NTPNP_PCI10014

  Everything that was happening at startup this error message appear?  This type of error usually occurs after a reload of the OS or the addition of new hardware.  If none of these things were done, then probably a hardware failure.  There is a modem installed according to the specification page: http://support.hp.com/us-en/document/c00874655

  If that is not used, then try to delete it.  Maybe just lucky enough that's the problem.  Most of the other elements are integrated on the motherboard

• HP Envy 17-j188ez - Windows 7 - unknown devices

  Hello

  I installed Windows 7 Pro on my HP Envy 17-j188ez and after having installed the drivers from the HP page, I still have an unknown and a device that cannot start in Device Manager:

  -

  Hardware ID Bluetooth controller

  -PCI\VEN_1814 & DEV_3298 & SUBSYS_18EC103C & REV_00
  -PCI\VEN_1814 & DEV_3298 & SUBSYS_18EC103C
  -PCI\VEN_1814 & DEV_3298 & CC_0D1100
  -PCI\VEN_1814 & DEV_3298 & CC_0D11

  Peripheral ID high definition Audio

  -HDAUDIO\FUNC_01 & VEN_8086 & DEV_2807 & SUBSYS_80860101 & REV_1000
  -HDAUDIO\FUNC_01 & VEN_8086 & DEV_2807 & SUBSYS_80860101

  High definition Audio Device has the status of the following device: this device cannot start. (Code 10).

  Any idea what software/driver I need to install in addition to get rid of these problems?

  Thank you.

  Hi 4711

  Install:

  Bluetooth of Ralink software driver

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=24&PFID=24&level=4&Conn=3&DownTypeID=3&GETDOWN=false

• Standard Enhanced PCI to USB Host Controller: a driver (service) for this device has been disabled. Another driver can provide this functionality. (Code 32)

  How to solve: ' Enhanced Standard PCI to USB Host Controller: a driver (service) for this device has been disabled. "  Another driver can provide this functionality. (Code 32). »

  I hv tried to uninstall, shutdown, then reinstall and also put to day, but all to no avail.

  Just to ensure follow-up on the post of joel S can you check the following registry key, which relates to the USB:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ (36FC9E60-C465-11CF-8056-444553540000)

  Is there a 'name' UpperFilters and LowerFiltersin the registry for this key, in the right window?

  If so, what is 'Data' for these names?

• I have a VIA card mother U8668-D and in Device Manager it is said that the "Multimedia Audio Controller", "PCI input device" and "PCI Simple Communications controller" function.

  I have a VIA card mother U8668-D and in Device Manager it is said that the "Multimedia Audio Controller", "PCI input device" and "PCI Simple Communications controller" function. I posted a link to the image below.

  Nevermind, I deleted the image by accident. Oops.

  https://SkyDrive.live.com/redir?RESID=D50158D65A52CBBA! 1928 & authkey =! AKdLQ4hGMOynvnc

  If the manufacturer of the motherboard doesn't provide drivers specific win7 there is none.

  If there is the bit Vista drivers ' appropriate ness, what they would usually work

• loss of connection; My pci wireless device disconnects after rest. How can I stop this from happening

  My pci wireless device disconnects after rest. How can I stop this from happening

  If it's a laptop, clear the check box of - connect to save the battery in the Wireless Control Panel.

• Envy 17-j120us: high definition Audio Device, Code 10 device cannot start, yellow triangle

  My IDT audio works fine and its works my laptop well, but when I curls upward from my laptop to my TV via a HDMI cable, I output my laptop displays on my TV but no sound from my laptop on my TV came out. I think the problem is because there is something wrong with my high definition Audio Device. It has a yellow triangle next to him with a! in the middle of the yellow triangle in the Manager of devices under sound, video and game controllers. And when I click on properties on the high definition Audio Device, it says: "this device cannot start. (Code 10) {Operation failed} The requested operation failed. Any help would be great. Is CLEAN Windows 10 installed on a NEW HARD DISK. I HAVE NOT upgraded, windows 10 was clean installed from a disc.

  See if it works...

  Download and install this free utility for files.  The 2nd listed file is 64-bit.

  http://www.7-zip.org/

  Then download and save, but do not run the graphics driver Intel W10 from the support page of your laptop.

  This package provides the driver that allows graphics Intel high definition (HD) in the notebook models that are running an operating system supported. If the video output high-definition multimedia interface (HDMI) is supported, this package also installs the HDMI Audio Driver.

  File name: sp72370.exe

  Right-click on the file of the Intel graphics driver you just downloaded and select 7 - zip from the list of options.

  Have 7-zip extract of: and let it extract the file in the file name (sp72370).

  Go to Device Manager and click on the audio device HD of the problem.

  Click on the driver tab, click on set to update driver.  Select her browse my computer for driver software option and navigate to the driver 7-zip created folder.

  Make sure that the include subfolders is selected and see if the pilot goes like this.

  Then restart the PC.