HP envy 17 can not boot windows or using recovery DVDs after the replacement of the motherboard

Similar Questions

• Satellite Pro A40 can't install windows without using recovery dvd?

  Hello
  I can't install windows xp pro on my A40 Pro sitting unless I have to use the recovery DVDs including family XP Edition pro.
  I own a copy of xp pro, but I just can not format the hard drive either through the xp pro Setup or using third party software.
  all ideas

  Thanks in advance

  Hello

  Maybe you have an old version of your Windows XP operating system in the Microsoft Windows CD.
  I guess you are not able to install the OS, because some updates and SP are missing on the CD.
  You should try to include service packs of MS, and then install the operating system.

  PS: I put t understand why you n t use the recovery CD. The installation is very simple and al Tosh drivers are pre-installed. OK, it s a Home version but there aren't huge differences of Pro

• I can not actitvate windows because I don't have the product key I bought a used pc

  I bought a used computer and now I can not actitvate windows because I don't have the product key

  http://social.answers.Microsoft.com/forums/en-us/XPInstall/thread/bc4d12bb-d592-4325-80aa-3b26759ad989

  Responded to your other Thread; link above.

  See you soon. Mick Murphy - Microsoft partner

• Can not activate Adobe Acrobat 7.0 standard after the window 10-any solution?

  Can not activate Adobe Acrobat 7.0 standard after the window 10-any solution?

  Acrobat 7 is not compatible with windows 10.

  I recommend you upgrade to Acrobat DC. (Plans and price |) Adobe Acrobat DC )

  Kind regards

  Rahul

• my account is taken hostage can not enter in more & used for fraud by the pirate air

  my account is taken hostage, & can only be entered more & used for fraud by the hijacker of air (in the past, I got an email from the logo of window live informing that the system has been upgraded and need my personal data for example, password information, etc., and would shut down if I didn't answer it).

  FYI, I've had a few matches with 'microsoft customer support' since yesterday and they suggested I go to the link of windows live to help, but I can't access the link to windowl live help (there always return to the same page over and over again). This is the page which I can't go further than that.

   
  Please help urgently to be able to click on the relevant link stop the hijacker using my old account for fraud.
   
  Thank you
  Ndrerek Maria
   
  Here is the page I can't go further:
   
  Ask your question

  Select the product

  • 
  • Select the question/topic
  • 
  • Useful solutions/discussions
  • 
  • Enter the details and submit the Question

  * Select product that relates to your question

  Select

  • Select a product
  • Hotmail
  • Messenger
  • Windows Live ID
  • Administration Center
  • Essentials installer
  • Family safety
  • Groups
  • Mail
  • Mesh
  • Mobile
  • Movie Maker
  • Photo Gallery
  • View profile
  • SkyDrive
  • Writer

  Selected product:

  Selected product:
  * Select the issue or theme that your question is about

  • Hotmail calendar
  • How can I remove a birthday of my calendar
  • How can I publish my calendar?
  • How can I undo a deletion of the anniversary of my calendar
  • How can I work with my calendar in Microsoft Outlook and other programs?
  • I do not receive my calendar alerts
  • I need to sync my calendar with my mobile device
  • I want to delete my calendar
  • Why can't I share a birthday out of my calendar?
• Error: "Hotmail limit the number of people, you can send a message to simultaneously.
• Error: "we noticed unusual activity on your Hotmail account.
• Error: "your account has been temporarily blocked.
• Error: "your message seems to have triggered our spam filters.
• Error: "your message was not sent because there is a daily limit of message"
• Error: It seems that this Inbox has been blocked. To resolve this issue, contact customer support
• How to recover my lost or deleted emails
?
• I can't work on Emails from my phone
• I cannot read or format my Email
• I think that my account has been compromised
• I have a question about calendar in the Inbox
• I lost my contacts
• I have question about my Windows Live Hotmail contacts
• I need to reset my password
• My Hotmail service seems to be not available/down
• Other issues of Windows Live Hotmail
• Send/receive email problem
• Spams are sent from my Windows Live Hotmail without my knowledge account
• Web Messenger
  • I have a question about using Web Messenger
• Unable to connect error: 80048820
• Unable to connect to Windows Live Messenger: error 81000306
• Contacts show status hurt me or vice versa
• Error message begins with 8e5e...
• Error: "the application failed to start because its side-by-side configuration is incorrect."
• Error: "your account has been temporarily blocked.
• I am getting another sign in errors
• I can't send or receive instant messages
• I can't connect to Windows Live Messenger. No specific error code is given.
• I have a question on Facebook or other updates networking social in Windows Live Messenger
• I have a question to customize my Windows Live Messenger
• I have a question about sharing photos, links and videos
• I have a question about the contacts in Windows Live Messenger
• I have a question related to the audio or video in Windows Live Messenger
• My Windows Live Messenger is not responding
• Other Windows Live Messenger questions
• I'm unable to sign
• I think that my account has been compromised
• I need to reset my password
• Other issues of the Windows Live ID
• How to advertise my domain name with a web module?
• How should I treat information about co-branding?
• How should I treat the problems with the MX record or pending DNS configuration error?
• I'm unable to set up the MX record because there is no MX record in the admin page
• Other issues Admin Center
• Error: "the application failed to start because its side-by-side configuration is incorrect."
• Error: 0x80070005
• Error: 0 x 80070643 or 0x800706d9 when installing Windows Live Essentials
• Error: 0x8104000b
• Error: 0x81901f5
• Error: The ordinal 266 not found in error when dynamic link library msi.dll you try to install Windows Live Essentials
• How do I change language for Windows Live Essentials 2011?
• How to install Windows Live Essentials 2009 without an internet connection?
• How to install Windows Live Essentials 2011 offline?
• How to uninstall Windows Live Essentials?
• Other issues of Windows Live Essentials
• What are the minimum requirements for Windows Live Essentials?
• Error: "your account has been blocked; You can't go to your account because your parents he blocked.
• How can I prevent my child to see a certain site?
• How to limit child access to sites?
• How to uninstall Windows Live family safety?
• How to download the logs on the forum?
• How to view a report of the sites visited my child
?
• Other issues of Windows Live family safety
• Error: "you have reached the limit of the number of guests, you can send in one day.
• I sent a group invitation to my friends, but they have not received the invitation
• My Windows Live group calendar does not show a good time creating events in Windows Live Calendar
• Other questions from Windows Live Group
• Cannot send emails
• Set up Windows Live Hotmail account to work with Windows Live Mail
?
• Error during synchronize account in Windows Live Mail
• Error: "the application failed to start because its side-by-side configuration is incorrect."
• How to configure Windows Live Mail?
• How to export contacts using Windows Live Mail?
• How to import contacts using Windows Live Mail?
• I can't open Windows Live Mail
• Other issues of Windows Live Mail
• Server error: 0 x 80048820. Error during the synchronization of your account in Windows Live Mail
• Computer disconnects a folder synchronized during synchronization in Windows Live Mesh
• Error: "Windows Live Mesh fails to connect because the service is temporarily not available or you are not connected to the Internet." "Please try again later".
• Error: "sorry, something went wrong. Please restart Windows Live Mesh"
• Error: "Windows Live Mesh stopped syncing... "when syncing in Windows Live Mesh
• My camera is not posted online even when Windows Live Mesh remote connection is enabled
• Other issues Windows Live Mesh
• What are the requirements of the system for Windows Live Mesh?
• I have a question regarding the application of Windows Live on Mobile
• I have a question about Windows Live Hotmail on Mobile
• I have a question about Windows Live Messenger on Mobile
• I have a billing question
• I have the text of message / issue alert
• I want to stop unwanted Mobile (SMS) alert
• . WTV files will not play or cannot be changed
• Error 80df0009 - sorry Movie Maker cannot start
• Error: 80004003 project does not open in Windows Live Movie Maker more
• General questions about Windows Live Movie Maker
• I have a question on how to publish a movie on YouTube
• I have questions about the types of files supported in Windows Live Movie Maker
• I have some questions related to importing video from a digital camera
• I have some questions related to the backup and sharing of a movie
• Other issues of Windows Live Movie Maker
• Download the album no longer works after upgrade from Windows Vista to Windows 7
• Content in the libraries of pictures do not appear in the Windows Live Photo Gallery
• Face recognition seems stalled on my machine
• I can't send pictures and videos through Windows Live Mail or any other mail client
• I have general order questions about Windows Live Photo Gallery
• I have questions about editing photos
• I have some questions related to importing photos and videos
• I have some questions related to organize photos and videos
• I have some questions related to the sharing of photos and videos
• I need to know how to create a panoramic photo
• I need to know how to display the RAW image file formats in Windows Live Photo Gallery?
• I need to know how to work with Photo Fuse
• My Windows Phone 7 is unable to connect to Windows Live Photo Gallery
• Photos disappear after editing with Photo Gallery
• When you use the slide show in Windows Live Photo Gallery, the buttons do not appear on the screen
• How can I delete my Windows Live profile?
• How can I remove friends from my Windows Live profile?
• I can't access my Windows Live profile
• I can't save my permissions
• I don't want my full name to display on my Windows Live profile
• I have an invitation, but when I click it, I get an error that says: "cannot display the Page.
• Other issues Windows Live Profile
• This profile is temporarily unavailable
• Can I rearrange my photo albums?
• The Office Live add-in works with Windows Live SkyDrive?
• How can I download a complete file
?
• I can't share a folder with anyone
• I have a question about Office Web Apps
• I have a question about the use of SkyDrive on a Mobile device
• I am unable to share my photos with friends
• My Windows Live SkyDrive account was closed
• Other Windows Live SkyDrive / Photos questions
• Some of my images appear as a red x in Windows Live Photos
• How can I get a fiddler trace?
• How can I get my log files
?
• I have troubled editions on my blog
• Other issues of Windows Live Writer


Hello

We can not help you here.

Go to Windows Live Help Forums.

http://windowslivehelp.com/

Hotmail forums:

http://windowslivehelp.com/product.aspx?ProductID=1

Forums for Windows Live Messenger:

http://windowslivehelp.com/product.aspx?ProductID=2

See you soon.

• A9P58UA #ABA: cannot use recovery DVD in the DVD player laptop external Envy 15-3033 CL

  I had to replace the hard drive of the laptop. A directed recovery DVD from HP. The internal DVD did not work, so I'm an external LG DVD player, model GP50NB40. I put the boot order in the BIOS to USB CD/DVD. However, the laptop does not recognize the DVD in the drive. I get a message this is something to the extent of the 'no disk bootable found '. I also hit F9 and selected the external drive to boot from without success. And for some reason, I also hit F11. Same message.

  I tested the DVD drive on another computer and it works fine. I changed the USB cable on the laptop to another port. No change. Does anyone have an idea how to proceed to load the software on the new drive? Thank you in advace for your time.

  Hello:

  I see that your laptop has 2 USB3 ports and 1 USB2 port specifications.

  http://support.HP.com/us-en/product/HP-envy-15-notebook-PC-series/5186791/model/5223304/document/c03151875/

  You need to boot from the USB 2 port.

  It would be the only suggestion I can offer.

• Can not enter windows - password used - messaging and can't. Usually, I don't get asked for it!

  Why am I being asked for username and password? Normally, I go directly to the send/receive and my mail comes through

  Hello Ray Obrien, welcome.

  The problem you encounter, it's whether your mail server to your computer for your login information. This can happen because of a few reaons, here are a few:

  1. your email provider recently changed its e-mail settings and you must update the settings on your side
  2. your email provider periodically requesting your information connection, as a security feature to ensure that you are always allowed and control
  3. your e-mail provider settings are incorrect in Windows Mail

  When the prompt displays your user name and password, enter your full email address and the password used to connect to it. An example would be:

  I have an e-mail account: * e-mail address is removed from the privacy *.
  I have a password: 123abc

  When the Windows Mail prompt appears asking my login information, I would like to join:

  USER name: * e-mail address is removed from the privacy *.
  PASSWORD: 123abc

  Let us know what happens if you try to enter your login information.

  Thank you!

• Can not activate my old copy of CS2 after the upgrade to Windows 7

  I have just updated to Windows 7 and had to reinstall my copy of Creative Suite 2 Standard. Try to use the software, I went through the routine of activation and it wouldn't activate online or via the phone.

  How can I activate my copy of this software. I always use this and want to keep it as an option before moving on to creative cloud.

  Thank you

  l http://helpx.adobe.com/x-productkb/Policy-Pricing/Creative-Suite-2-activation-end-Life.htm

  Mylenium

• I can not get windows to load.i have made the recovery discs, but cannot get to work. How can I make this .thanks

  When I turn on the computer, it goes to a blue screen and stops there.

  If you have performed according to instructions of the manufacturer of the computer Vista recovery disc and you encounter problems by encouraging them to work, you must contact the manufacturer of the computer for help.

  This isn't their recovery process, Microsoft.

  See you soon. Mick Murphy - Microsoft partner

• 5700 sucks not start windows cannot use recovery CD

  I have an Aspire 5742 running Windows 7 Home Prem

  When I try to start windows I get a message from windows Startup Manager

  File: \windows\system32\config\system

  Status: 0xc000000d

  Info: Windows does not load because the system registry file is missinig, or corrupt.

  All the information I found about it says to boot from the cd backup and restore. But does not start the rescue cd. It is to the top of the same screen as above. I used a Live CD from another operating system to test the dvd player and it works and LiveCD boots (I have not install anything). How can I get the live cd boot and restoring windows?

  Thank you Tim

  Add you to the new device for your PC?

  Otherwise, this can your RAM error, try plugging / on your windows without end to research RAM.because (more than 15 minutes) show your PC with hardware or incompatible error

• Boot Camp can not detect Windows software support

  Hi guys!

  1. I have a question, I started my bootcamp and pressed the 2 first options and clicked on continue:

  http://postimg.org/image/9mly0tvjl/

  2. that's what I did to "2." step. I chose the iso file of Windows 7 Home Premium and boot camp agreed and loading all fine!

  http://postimg.org/image/tg97p5fu5/

  3 and now it was time for step 3:

  http://postimg.org/image/554gf7i3x/

  After Boot camp let me decide how many GB, I want to save for Windows... I got 500GB (half) and clicking 'Install'... but the problem is here...

  It is said that: "Boot Camp can not detect Windows supports software.." and so on.

  Where do you think the problem is? Is - this problem on the ISO file?

  I would appreciate any kind of help,

  Thank you.

  What year/model is your Mac? Please see step 11 in install Windows 7 and previous versions on your Mac with Boot Camp - Apple Support .

• Windows XP does not start. Can I boot Windows from a disk so that I can recover the data?

  Windows XP does not start. Can I boot Windows from a disk so that I can recover the data? This should be a CD because it doesn't have a floppy disk on my laptop drive. It is maybe that my hard drive has begun to fail and therefore cannot locate XP startup files. I can not start using one of the other methods of starting for example. Safe mode. If I can recover the data, I can then reload Windows and check the surface of the disc etc etc. Thank you all for your comments. Steve

  Lately, I'm leaning toward the Hiren's BootCD you can download here:

  http://www.hirensbootcd.NET/

  On the left, click on download, scroll down, choose the most recent version

  The download link is a little hard to see.  It is at the bottom of the page, above the drop for older versions and looks like this (click this component to download the ZIP file):

  Direct HTTP mirror + Torrent, Torrent Magnet

  Click the "Live HTTP Mirror" link to start the download and save the ZIP file on your desktop of somewhere that you can remember.

  The ZIP file is large, so the download will take probably some time to complete.  Then unzip the download to extract theHirens.BootCD.ISO file that will be used to create your new bootable CD.

  Create a bootable CD. ISO file is not the same as simply copying the. File ISO onto a blank CD.  You must use software that includes how to burn a. ISO to a CD to create a bootable CD.

  File ZIP the Hiren is the file BurnToCD.cmd that you can double-click to launch it.  The BurnToCD.cmd will use the file BurnCDCC.exe to burn the. ISO file onto a blank CD using your existing CD burner.  You can also use your own burning software as long as your software is able to create a bootable CD. ISO file.  More modern burning programs can create a bootable CD. ISO image.  Create a CD from an ISO image bootable is not the same as just the file on a CD burning.

  If you need a simple and CD burning, this is a free software popular software:

  http://www.ImgBurn.com/

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your new bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.
  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When starting on the Hiren's CD, you will see a menu of options.  Choose Mini XP.

  It will appear while Windows is loading and you will be presented with a desktop computer that has the look and feel of the interface of Windows Explorer, you are already accustomed to using.  You will feel at home.

  Using the Mini XP, you can access the Internet, maneuver around your system, copy files, replace the files, run the scans for malware, etc.  There are dozens of free and useful tools included in the CD that can be used to repair your system, or copy files to another device such as a USB device or an external drive if drop in trying to repair your system.

  If you want to see if you can fix your system, describe what is happening when you try to start and to answer these questions:

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  Describe your current antivirus and software anti malware situation: McAfee, Norton, Spybot, AVG, Avira!, Defender, ZoneAlarm, PC Tools, MSE, Comodo, etc..

  You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?

• Y430A can not boot after memory upgrade

  OS: VISTA HOME PREMIUM 32-BIT
  CPU: P7350
  MEMORY: HYNIX DDR2 667 2GB

  I added a 2 GB Kingston ram on the connector 2

  First of all, it can be the start and connect to windows,

  but after a while, the system of suspension or the SCREEN BLUE DEAD shows,
  He cannot even get into the bios screen when I reboot it

  but it can be boot up if I remove and reconnect the memory

  Sometimes the machine can be restarted and works correctly, except if once I turn it off

  I tried to exchange the slot 1 and 2 with 2 x 2 GB,

  and also replace with 2 x 256 MB Hynix memory.

  but it does not work.

  The new memory is not faulty or is not compatible because it works very well if it autonomous.

  In short, if I install 2 x 2 GB memory, the system may start only once.

  Is it the BIOS problem or it's my mistake?

  Please help and sorry for my bad English.

  Thanks in advance.

  This is perhaps due to the incompatibility of the modules of RAM, working together. If Yes, than to change only the modules will help.

  Also looks like Y510 behavior when it was a fresh model - Y510 all were not able to manage two RAM modules. Update the BIOS helped. For now no new BIOS for Y530/Y430, so will have to wait.

• When I try to start my laptop, it goes to the Acer logo screen and will not boot Windows 8.

  Acer E5-471

  When I try to start my laptop, it goes to the Acer logo screen and will not boot Windows 8. Only a black screen and mouse pointer appear. How can I solve this problem?

  Hello

  1 power off the device
  2. power on and immediately keep taping Alt + F10, unit will start to recovery, choose Exit & continue to windows. Post back if I helped

• Reinstall vista again HARD drive now PC don't can not boot from the DVD drive I can copy vista external hard disk drive, and then install on the laptop

  Duplicate info wire - running kill disk, vista disappeared and my laptop does not see my dvd/cd drive and I can't reinstall vista OS because of this problem

  Have to reinstall vista on a new HARD drive now PC can not boot from the DVD drive I can copy vista external hard disk drive, and then install on the laptop?

  The DVD player worked before HARD drive went bad now, it won't work.

  And I just replaced the HARD drive, but now cannot load an operating system that he...

  Help, please...

  Hi dynamitenews

   

  1. are you able to boot to the desktop?
  2. what happens when you try to start the computer?

   

  You must have the DVD drive to start the computer using the disk, you cannot use the external hard drive to do the same thing.

  Also I suggest you to make sure you have defined the start as CD/DVD-Rom as the first choice option in the BIOS. See below the help link-
  http://Windows.Microsoft.com/en-us/Windows7/BIOS-frequently-asked-questions

  If nothing is done, then you can contact the manufacturer support for assistance on setting up the correct boot sequence and check.
  
  BIOS WARNING-
  Change (CMOS) BIOS/complementary metal oxide semiconductor settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

   

  I hope this helps.