HP envy 17 double bays

Similar Questions

• Qosmio X 500: esata and a unique display of storage RAID external disk double Bay

  Hello

  IM using external storage of Welland ME-580J dual Bay raid equipped two WD 2 TB green HDD in Raid 0.
  Using the connection on my 500 - M 2 X esata I only see a hard drive. Technology Intel Rapid Storage Technology software can see both drives and will report the correct amount of storage.

  Windows Disk Manager will see 1 HDD. I spent several hours trying to find a solution, but I was not able to find a solution.
  Access to the external storage via USB works properly, but it is slower than esata.

  Has anyone experienced this and found a solution?

  Solution to what?

  As much as I know RAID 0 is nothing but striping and you cannot use two hard drives as separate units.
  Every HARD disk has several parts/blocks and they work together.
  Using RAID 0 will at the same time access to these two hard drives and it will increase the speed of transfer rate.

  I don't have this camera and can not test it, but it makes sense to me that windows Disk Manager see as a player.

• HP Envy 4500: Double-sided printing

  I've had my printer for about two months now, and at the beginning I had no problem with printing. I was thrilled that the printer has the ability to duplex printing to save paper, but all of a sudden my printer is more two-sided printing even if the "meetings" are checked in the print menu that appears before printing. I would go to the bottom of this, because I prefer to take advantage of the features of the printer and save paper. Please let me know what I am doing wrong and advice to solve this problem, thank you!

  Collected has nothing to do with the double-sided, this means that when you print 3 copies of a document that is five pages long, it will print pages 1 to 5 three times instead of print page 1 three times and then page 2 three times and so on. Double-sided printing can be enacted in one of two ways. Either you select double-sided as an option when you go to print a print job, or you set the driver to duplex by default values. According to the printer model, you can also apply duplexing by telling the duplex printer all. It is model specific and you do not specify the pattern here, so I can't give you the exact details.

• 15 - K167CL: ENVY 15-K167CL bays

  This laptop have more connection to readers - like a HARD drive and SSD?

  Hello

  From the third link manual next (page #2), M.2 SATA slot and normal HARD drive slot

  http://support.HP.com/us-en/product/HP-envy-15-notebook-PC-series/7234894/model/7479938/manuals/

  (Direct: http://h10032.www1.hp.com/ctg/Manual/c04434142.pdf )

  and he uses 2280 format for M.2 SATA as mentioned on page #3.

  Kind regards.

• HP Envy 4500: Double-sided printing, 2nd page is upside down, using a mac

  Hello

  I can't figure out how to make the second page, not upside down.

  Any idea?

  The only option is a check mark for two-sided box, after you click printer.

  Help!

  Hey @Kerry007

  Thanks for the detail and the screenshot, it is very useful.

  I see that you use AirPrint driver, not that of the HP and which may cause the problem.

  System Preferences > printers and Scanners to select your printer and click on the button "-" to remove it.

  Then click on the sign more and select the printer listed.

  Click the menu drop-down use, instead, the default AirPrint option select the printer model from the list and add it.

  Now follow my steps, and you should be able to find this option and change the type of link.

  Kind regards

  Shlomi

• What models of HP Envy 17 has two locations of hard drives?

  Anyone who could tell me what models of HP Envy 17 has Bay hard drive dula?

  Also I intend to order "HP ENVY 17-j008eo" someone knows if it has two hard disk slots?

  Here is the product Web page: HP ENVY 17-j008eo http://h20386.www2.hp.com/swedenstore/merch/Product.aspx?id=E3Z66EA&opt=UUW&sel=PCNB

  Hello

  You are welcome

  I agree that's not very good information.

  As I said, the model that you are considering buying is very similar to the one I'm currently using and it definetely will be 2 drive bays - in fact all the Envy 17, m7, dv7 models etc. have 2 drive bays.

  One thing you should do some before you buy, is that all disk Caddy and the necessary cable to install a HARD drive in the Bay from 2nd is available where you live - for example, if you are in the United States, they are available here.

  Best regards

  DP - K

• El Capitan does not start after a freeze and a forced, bonded stop on the gray screen

  Hi all

  I have a MacBook Pro 17 "late 2011, 2.4 Ghz, 16 GB RAM with OS X El Capitan installed, the latest version with all the updates." A year ago, I've had my Toshiba HDD replaced by Samsung SSD 250 GB SATA III 850 EVO and the Toshiba disk has been moved to CD using LMP disk Doubler Bay, at the same time, I had my RAM went from 8 GB to 16 GB of RAM, I have now. The OS X El Capitan is installed on the SSD. In this configuration, everything worked well, with absolutely no problem whatsoever. Sometimes, I ran disk utility to check both of my hard drives and no problem.

  Unfortunately yesterday, strange things started going. First of all, I noticed some unusual glitches when you browse the internet with Safari. I'll try to describe the best I can because they lasted about 2 seconds, so I don't recall. In any case, all of a sudden, as if half right of my screen has shifted in the middle of the screen and it was wrong and image around was all damaged or distorted but legible. He'll be back to normal when I switched between applications or revealed the office displays the windows of all running applications.

  It was similar to this (below) but much larger.

  

  Then, I continued my work as if nothing had happened, when all of a sudden my mouse pointer disappeared and the system froze completely. It was just totally frozen, the time was not moving and the computer did not react somehow to the keys I pressed. Unable to do anything, I had to press and hold the power button to turn off the computer. After starting it again once I hear the ringtone, I see the gray Apple logo and the loading bar. When the loading bar reaches about 40%, a coloured horizontal line appears (see photo below), then it subsides quickly followed by a black screen, which is quickly followed by a blank grey screen with no Apple logo or the bar loading, just a gray screen Uni, where I'm stuck. The computer turns off by itself after about 15-30 minutes if I leave it like that on the gray black screen.

  The coloured horizontal line:

  http://i.imgur.com/9rzEyc4.jpg

  I can't start in safe mode or recovery mode.

  I CAN only boot single user mode, Apple Hardware Test mode, the boot (by holding the ALT/OPTION key) Manager and verbose mode. Also, I can start on the Internet recovery mode but once the download is complete, it is stuck on the gray screen (gray screen with the Apple logo WITHOUT horizontal line-online quick clear-online stuck on the gray screen black screen)

  After a lot of googling and reading, that's what I've tried so far:

  -' fsck - fy " in single-user mode

  -running Apple Hardware Test and the Apple Hardware Test extended, both are zero problem

  -Reset PRAM and NVRAM, MSC, several times

  -with the help of this guide: https://www.afp548.com/2015/01/14/when-yosemite-has-fallen-and-it-cant-get-up/ in single-user mode: "rm - rf / Volumes/Macintosh\ HD/private/var/db/BootCache * '

  "rm - rf/Volumes/Macintosh\ HD/Library/Caches/com.apple*"

  "defaults write DSBindTimeout HD/Library/Preferences/com.apple.loginwindow.plist Volumes/Macintosh\ - int 10.

  
  

  -in single-user mode: empty the trash

  -in single-user mode: "sudo purge"

  
  

  -in a single user mode: 'exit' or 'reboot'

  
  

  
  

  However, during my fight, I could successfully arrives at the login screen, log in and use my MacBook for some time, about a half hour before the same thing happens, the mouse disappears and the system to freeze completely. I remember that both times where I was able to get to the login screen, it was after I had been in single user mode and typed 'Quit' or 'reboot'.

  The above colorful horizontal line also appears in the single-user mode when I type "exit" AND I am UNABLE to get to the login screen later (photo below). It just goes to the gray white screen. Those two times when I was able to connect to exit single-user mode, the horizontal line colored is NOT appear in single-user mode.

  The horizontal line colored when you exit single-user mode:

  http://i.imgur.com/0tOVEO6.jpg

  
  

  
  

  Here's what I see in Verbose mode:

  http://imgur.com/LJIRyo

  http://imgur.com/4HF4hvJ

  http://imgur.com/uMdHY5Z

  http://imgur.com/WSswHKK

  MacBook Pro repair for graphics issues outreach program

• file read write binary error 116

  Hi all

  I am double, digital table in binary data record and then try to read back but keep on getting error 116 (cannot read binary file).

  I've attached screenshots of the way I write my data in the binary file, then the way I'm reading it. Basically, my data are pieces of 2D double bays, which come at a frequency of 1 Hz and this is why I use the GET and set file size before saving to the file (i.e. so that whenever I add my file with new data).

  I tried all combinations for binary and read Scripture to binary functions, which meant that I tried a few options big endian and native, but I keep getting the same error. Also played the way I add my data, i.e. I used the options of 'end of file' and "offset in bytes" just in case it makes a difference, but again no luck.

  Any help would be much appreciated.

  Kind regards

  Harry

  Try to set the 'pre append array or string of size' true.

  That seems to work here...

• No AHCI? Samsung 840 Pro? HP Dv7t-7300

  Hey guys, I noticed today that by virtue of the HP BIOS options is an AHCI option. They don't let you change to all modes. I have a HP Dv7t - 7300 laptop. I bought a new SSD for performance gains, but I was wondering will I get full use out of it. At first I was getting really good at reading and writing speeds, but it slowed to about 300 now. Does anyone know if I should just leave it as what or try to configure for optimal performance. In Device Manager, I see only a driver who says RAID SATA AHCI not. I have attached the photos below. The old hard drive is now always in the laptop but on the second SATA port. The magician of Samsung software also tells me that AHCI is not active. Is this normal for the SSD performance fluctuations?

  http://i.imgur.com/394cMfR.PNG

  http://i.imgur.com/Jx1iTjp.PNG

  http://i.imgur.com/I5UdM4I.PNG

  http://i.imgur.com/esRNmv6.PNG

  The BIOS in double bay dv7 models is not set to RAID, AHCI, and cannot be changed. But don't worry it is ahci compatible RAID. Files of native and other functions necessary to support an SSD are present. I would be not too wrapped in reference SSD speeds. 300 Mbps is very fast. How does it feel?

• List of simple questions and yes or no on the workstation Precision T7910

  (1) I bought a T7910 with 1 single processor, I can add a second processor later?

  (2) all 7910 models come with a card mother two-way?

  (3) there are videos on Youtube showing a guy change his disk HARD 5.25 "ports in 2.5" SSD ports with cables, screws, metal plates and these little fans and others, but there seems to be no way to know where he got the cables, screws and small fans, make this kind of options, cables, screws, plates and fans etc come with the T7910?

  (4) if they do not come with the machine, can I order after the fact? (where? See the next question...)

  (5) I went on the site of Dell parts & upgrades and page "Accessories for your Dell Precision workstations T7910".  There was exactly ONE part available for the 7910, (some strange little video cheap card) see here: accessories.us.dell.com/.../Category.aspx. l = en & cs = 19 & s = dhs & stuff 2999 = & mfgpid = 238987 & tab = parts & stype = 2
  so...

  That is the ONLY part or an upgrade can buy for a Precision 7910 workstation?

  (subquestion: where are the replacement power supplies and memory chips and cables and fans and Procs and disks and Kits of Raid for the 7910?)

  (6) I bought 32 GB DDR4 - 2133 to my 7910 (in a 4X8Go configuration), I can ADD memory later keep my existing and all chips by adding 4 more chips 8 GB for 64 GB? (or they are all must be matched installed chips at the same time like the old days...)

  Thank you!

  Thank you!  (I think...)

  Strange, they would have several distinct Styles of motherboard for the same computer model...

  In the manual for the T7910, they show the double bays memory and dual processor berries...  Why would they not mention that it is only optional and 7910 configurations not all make?  It is very misleading. (He misled me to order the wrong thing!

  (Like a car ad, they show their best setup in the manual and ads too, but they are sure to mention what Optional Configurations are therefore not false advertising - what makes people think that they get things they aren't!

  [url = http://postimg.org/image/s7dq8k8y7/] [img] http://s3.postimg.org/s7dq8k8y7/Untitled_1.jpg [line] [url]

• After effects CC 2015.3 Crash when I use Fast AMD R7 2 265 project option

  Hello

  After that effects CC 2015.3 crash when use fast project option.

  

  Here's a video recording to clarify my problem.

  After Effect does not not using a quick project on Lenovo E550 with Amd R7 M265 - YouTube

  After effect use the Intel HD Graphics 5500 built in graphics card and good work.

  When I go to the quick option project aftermath addresses do not at all. Please help me.

  Kind regards

  Ashour

  Specifications:

  Lenovo Thinkpad E550 with AMD R7 M265 2G

  Processor Intel® Core™ i7

  Windows 10 pro x 64

  Intel® HD graphics card

  AMD Radeon R7 M265 2 GB

  DDR3L 1600 MHz 8GB

  15.6 "HD 1366 x 768 200 nit glare

  Webcam HD 720 p with micro double, optional

  240 Samsung SSD HARD drive

  Double Bay Microphone

  Headset/Microphone combo Harbour

  Dolby® Advanced Audio

  Up to 9 hours (internal battery 48 w/h)

  Gigabit Ethernet, b/g/n or a/c, WIFI

  Hello

  Finally fast project after effects CC 2015 option and here works on a video recorded for it.

  Quick project overview the Option works on legacy CC 2015 On AMD R7 M265 2 G - YouTube

  I think that there is a problem with the last after CC 2015.3 effect, I hope that adobe can fix for other perhaps users that they have the same problem and they want to use the last legacy CC 2015.3.

  Now I have just 4 days to try after effect, and unfortunately I can not buy it and Yes, after effect is an excellent program to design the query.

  

• Disk capacity hard campaigns for Dimension 4600

  All.

  I'll make my 5 year old Dimension 4600 Windows Home Server.

  First: Is there a limit to campaigns? The case has double bays ATA100 and I would install 2 1 TB Western Digital caviar. This will exceed the limits of the Dimension 4600 campaigns.

  Second: ATA100 will be sufficient or should I change to SATA? And is it possible and how would accomplish this?

  Thanks in advance.

  
  

• The HP Envy dv7 - 7323cl has a double hard drive Bay

  The HP Envy dv7 - 7323cl has a double hard drive Bay?

  Hello

  Yes, it can accommodate a second HDD.

  Kind regards.

• HP ENVY 17-R102NL: dvd burner double layer HP ENVY 17-R102NL

  Hello

  I would like to know what kind of burner is installed in HP ENVY 17 - R102NL laptop computer?

  What is the burner model number?

  It is a DVD burner double layer RW-/ + or not? or another type?

  Thank you

  From the Manual:

  Fixed optical drive, Series SATA, DVD +/-RW Double layer SuperMulti Supports zero power optical drive Supports M-drive 9.5 mm tray loading

  Optical drive DVD +/-RW Double layer SuperMulti 813784-001

  So yes, it will read and burn supports double layer.

  

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• HP ENVY 17-n152na: HP ENVY 17-n152na second Bay HD?

  As the title says: the HP ENVY 17-n152na has a second Bay hd?

  It has space for a secondary hard drive.

  You will need to purchase a Kit of materials from hard drive (including the main hard drive and cables and support of secondary hard drive) HP part number 603772-001