HP Envy 17: HP Envy 17 will not charge or turn on. Quite dead.

Similar Questions

• My P50-A-10U Satellite will not charge or turn on

  The laptop will not charge or turn on, it's like its completely dead.
  No lights or any sign of life. It worked yesterday and now when I try and turn on, it doesn't.

  The charger also mysteriously broke today, I confirmed this by plugging in my other laptop Toshiba (C855 series) and it would not load. I tried this portable charger in my p50t, but not fires.

  I think that the motherboard may be dead, but I can't be sure.

  I also did the tour of the reset button but still no luck. Any tips?
  I don't have a multimeter and I have not guaranteed that I got on ebay.

  > I think that the motherboard may be dead, but I can't be sure.
  > I also did the tour of the reset button but still no luck. Any tips?

  Which is a shame. I guess you don t have a lot of options.
  From my point of view of a few it's necessary to know what part is faulty: part built in Notepad (motherboard, etc.) or external part (adapter).

  But even if the power adapter for laptop s would be defective, the unit should light up in case the battery is charged. In case the battery is empty, the unit will not supply.
  I think that this need to be clarified in the first step before you start checking the other parts.

  The next step should contain the check RAM and motherboard and in my opinion, only a cell phone technician would be able to perform the audit of the detailed hardware diagnostics.

• HP pavilion dm1 4004sa: Hp pavilion dm1 4004sa will not charge or turn on

  I recently got a used laptop from a family member, that we were in trouble. We replaced the battery which is partially charged, so it worked for awhile. However when that failed and we have tried to charge the cell phone. Nothing happened, it won't turn on and when the charger is plugged in nothing happened.

  The only thing that happens is when you plug the charger and try and turn it on, the little light beside the accusation taken flashes.

  Any ideas?

  As the power\charge LED does not illuminate, this means that either the power adapter, DC power on the laptop or the system board connector have a problem.

  If I were you, I would like to start with an AC adapter. You say it's one that you've inherited, a manner of speaking. A new power adapter costs way less than a new laptop computer. Find one online by doing a search with the HP dm1-4004sa adapter as keywords.  They are as inexpensive as $12.00. http://www.Amazon.com/DM1-4000EE-DM1-4004SA-DM4-1277SB-DM4-3052NR-DM4-3090SE/DP/B00Q8QMF3K

  Here, the research that I did is.. You must perform your own search because it will use more results local server.

  If the power light does not light, it's a diagnosis.

  A power\charge blinking LED means that the battery has failed, but no LED no battery me would right adapter.

• iPhone 3G will not charge or turn on

  Browsing the forums I've seen problems close, but not quite like mine. My old iPhone that 3 G does, saying he has 51% autonomy, when it is plugged into the wall. When removed, it stops immediately. When plugged into my computer, it won't do anything. Don't load, boot, recognize, whatever it is. I can't keep it plugged into the wall, because I reset and it should connect to iTunes, before I can do anything. I use a Dell Vostro 1500, running Windows 7, iTunes 12.3.2.35 64-bit. Any help would be appreciated. Thank you.

  Your battery has failed.

• Need help, pavilion dv67000 will not charge or turn on

  I have a HP Pavilion dv6700, when my battery low getting started, I plugged it like all the other days, but he's still dead on me (icon says plugged in, does not support it) I found if iwiggle power cord him flickers blue led, but as soon as I let go or I press the power button, it turns off. Ive read that I need to replace the power plug and usb card but I can't find one that is suitable for this model, or they're stupid expensive when I do. I found one for another computer hp laptop for< $="" 10="" but="" when="" i="" did="" find="" one="" for="" this="" computer="" it="" was="" well="" over="" $90!="" im="" a="" college="" student,="" i="" don't="" have="" that="" kind="" of="" money="" laying="" around.="" i="" also="" have="" work="" due="" so="" i="" need="" something="" that="" can="" be="" overnighted="" reasonably.="" any="" idea="" what="" i="" should="" do?="" hp="" wants="" me="" to="" pay="" just="" to="" talk="" to="" them!="">
  -Brad

  I found the part on ebay for $60, ordered and installed this weekend and now everything works fine. The laptop power connector was twisted and was not making contact with the plug of the charger. (It is a common problem with these computers) but it took a while to find a power supply Board for replacement (446524-001) for a reasonable price. (The battery had nothing to do with it, it was caused by a bad connection on the DC in jack).

  -Thank you

• Excite AT10-A-104 will not charge or turn on

  I bought my son the TOSHIBA AT10-A-104 and turn on it or anything hes tried to go through all the different steps and techniques that are online but nothing works... If someone could help it would be much appreciated...

  Thank you.

  There is probably something wrong with the hardware.
  Are you sure that the charger is connected correctly to 100%?

  New Tablet's battery must be charged for a short period in order to on the tablet.
  Keep it connected then press and hold button power 5 sec long.

  You can also check if you would be able to get the restore menu.
  Press and hold the power button and the volume up button at the same time.

  Is this possible?

• HP ENVY 7640: new HP Envy 7640 will not feed documents in scan mode

  New HP ENVY 7640 will not feed for scanning documents.  It transmit documents in copy mode but not when you try to scan several pages.

  Hello

  Thank you for using the HP Forums.

  Have you installed the software features FULL?

  If this isn't the case, please download and install the FULL features software:

  http://support.HP.com/us-en/drivers/selfservice/HP-envy-7640-e-all-in-one-printer-series/6617267/model/6617268#Z7_3054ICK0K8UDA0AQC11TA930C7

  Once you have done this, launch the Scan software (via the HP printer Assistant) and make sure that the source is "heavy use document feeder.  (Example shown)

  

  For more tips scan, please reder to this resource:

  Scanning for Dummies

  Your printer uses the NEW interface of scanning.

  Hope that helps!

• HP ENVY notebook: battery not charging!

  Hello

  I recently bought a HP ENVY laptop, and I've updated my windows edition to Windows 10.

  2 weeks ago, I noticed that my battery no longer works. It does not load: its says "plugged in, load" but its not charging.

  now my battery is empty, (say 3%) and my laptop 'nine', which isn't that 2 months, does not come on unless it is plugged.

  You have a solution to my problem?

  PS: I tried to uninstall and reinstall the drivers of the battery from the Device Manager, but nothing happened!

  Is it a windows update problem or a battery problem, although my laptop has only 2 months?

  Thank you very much for your help!

  Hi there @Rodgee,

  Welcome to the HP support community where you can ask questions, find solutions and get help from others in the community! I wanted to join you and help! I understand that your battery will not charge on your HP ENVY laptop PC. You mentioned you tried to uninstall and reinstall the drivers and that you are not sure if this is a problem with the battery of Windows updates.

  Please make sure that the AC adapter cable is not plugged into a power strip, surge arrester, or secondary power source. It should be directly into a wall outlet.

  There are a couple of documents that you can use to try to understand where is the problem. The first one I would say is the document of the battery is not Notebook Power or hold a Charge . If your laptop battery will not hold a charge, you better follow the instructions in this document step by step to fix the battery and see if it needs to be replaced.

  You can also use the document test and calibration of the battery (Windows 8) . This will help you determine the status of your battery.

  Have you tried to use the HP Support Assistant to download drivers and updates? Here is a link to the HP Support Assistant, if you need it. Simply download and run the application and it will help with the software and drivers on your system that needs updating.

  This answer doesn't solve your problem or answer your question? If so, please share the good news! Inform others that this answer was helpful by clicking on the button accept as a Solution . You can also show your appreciation by clicking thumbs-up.

  If you need assistance, I would be more than happy to continue to help you. Please re-post with the troubleshooting results and include your model number (How can I find my model number or product number?).

  Thank you!

  Have a great day!

• My pencil to the iPad will not charge.  What should I do?

  My pencil iPad suddenly stopped charging.  The connector of the lightning and the wall adapter successfully charge my iPad and my iPhone 6 but will not charge my pencil.  The green light on the pencil map is no longer lights up.  The pencil is about 7-8 months.

  Hello

  Check the ports on the adapter load load pencil Apple for debris.

  Also try to load your Apple pencil by plugging in the connector of the lightning on your iPad Pro. If the battery is exhausted, a second charge of 15 should provide 30 minutes of use.

  • Use the pencil to Apple with iPad Pro - Apple Support

  If the problem persists, contact Apple support (mail service may be available) or make a Genius Bar reservation in order to your Apple pencil and accessories checked power warranty:

  • Contact - Support official Apple
  • https://Twitter.com/applesupport
  • http://www.Apple.com/retail/Geniusbar/

• IPhoto on the external hard drive will not launch despite the force quit and relaunch several times. Can someone help me?

  I have a MacBook from 2008. 4 years ago I moved my iPhoto on an external hard drive. I have thousands if photos on it. IPhoto on the external hard drive will not launch despite the force quit and relaunch several times. Can someone help me?

  < re-titled by host >

  I moved my iPhoto on an external hard drive.

  Did you move the iPhoto library for the external hard drive or the iPhoto application, or both?

  How is formatted the external hard drive? Is the file system on the drive Mac OS extended (journaled) or other system files?  Is the drive directly connected by USB or similar, or is it a SIN?

  IPhoto on the external hard drive will not launch despite the force quit and relaunch several times.

  I don't understand - if you force quit smoking, launches the application, or you can not force it quit?

  IPhoto is suspended without doing anything, when you launch?

  What version of iPhoto does? And what version of Mac OS X?

• Satellite battery click on Mini L9W - B keyboard will not charge

  My keyboard battery will not charge, I left it loads for more than 24 hours after the battery 1 reached 100%.

  I checked the version of the bios that is 1.70. I read the other posts on this particular issue but unfortunately nothing works for me.

  It shows the symbol of charge on battery 2, but it did not go above 0%. If I turn on the battery runs immediately battery 1.

  Please advise me on this point because otherwise I will have to return my satellite click mini. Thanks in advance

  You completely turned the device off?

  Do... Press and hold the power button / stop until the device turns off.
  In addition, you can stop the unit pressing and holding the key SHIFT and then choose SHUT OFF

  Then check the connection between the keyboard and Tablet docker... possibly disconnect and connect again.
  Once the unit turns on again and check the battery State of charge connection adapter to the device.

• My Apple Watch will not charge on the charger.  I cleaned the back of the watch and the charger.  Any ideas?

  My Apple Watch will not charge on the charger.  I tried to clean the back of the watch and the charger more used several points of sale, but in vain.  Any ideas?

  Hello

  When you reload your watch, check that:

  • All the plastic film was removed from both ends and both sides of the cable support (consult closely on the head of the charger).

  

  • On the back of your watch and the head of the charge cable are clean and dry (clean with an abrasive, lint cloth).
  • The head of the load is properly aligned with the back of the watch, with the concave side / curve touch fully:
    • Some docks of watch, brackets, cases or protectors might hinder it.
  • You use a real Apple magnetic Charging Cable or a certified Apple module magnetic charge.
  • If you reload your watch by plugging into a power outlet:
    • Check that the magnetic charge cable Apple USB connector is fully engaged in the USB power adapter.
    • Try to use different maps of the following:
      • The real Apple USB Power Adapter that came with the watch, or;
      • A true 5W Apple (iPhone) or 12W (iPad) USB power adapter, or;
      • A third-party certified 5W (MFi) Apple USB power adapter.
    • Try to charge via a USB port (see following).
  • If loading via a USB port on a computer, make sure that you use a USB 2.0 or 3.0 port, the computer remains turned on and awake, and the cable is plugged directly into the computer (not on, for example, an external keyboard).
  • If your battery is very low, you may need to wait a few minutes for the green lightning appear (confirming that the charge has started).

  Once the load has started, you can tap on the screen at any time to check the progress (leave a few minutes at the beginning, where the watch is in charge of a very low battery level). A green lightning bolt symbol indicates that your watch is being loaded. It is normal the screen back to sleep while continuous load.

  More information:

  Check your battery and load your Apple Watch - Apple Support

• Satellite A100 - will not charge the battery

  Hello

  I have ned to help. My Satellite A100 will not charge the battery. He works the power adaptor for the led indicates charging status, battery shows 1% of loading tatus information, but none does change - no loading any time. When disconnected everything just stops off like normal desktop.

  I've already put battery in and out, made upgrades to the antivir software, makes Toshiba controls, tests, but what ever he did did not any change. If there is no way for restoration of battery how to check what the problem is I have no second battery or AC I can always buy new batttery but I don't know if the old one is broken and weather new would work properly?

  Best regards
  pawelg

  Hi pawelg,

  I agree with the user above. The battery can be charged only up to 500 times, and after that, it must be replaced. I think it's the case now, I mean that everything works correctly on the AC adapter so I think that the battery must be the reason for this.

  By the way: you can buy a new battery to an authorized service provider. ;)

• Satellite A100 - 166 PSAA9E will not charge the battery

  Hello

  My laptop will not charge the battery.
  Although Windows Xp recognize the battery and says loading, the battery does not charge.
  I tried with a spare battery that I thought that the battery was faulty, with the same results.

  Strange thing is, when I turn off the laptop the power led remains lit and the blue, even without the power supply attached therefore discharge the battery.
  The battery led is still orange but not load!

  What is the problem with the laptop?
  Thank you

  Hello

  Generally, there are three possibilities;
  (1) the adapter is faulty
  (2) the battery is faulty
  (3) the logbooks electronic malfunctions (ESF)

  So now he of needed to check all these steps to find the fault.
  You said you've tried different batteries and AC adapter works too.
  So it is possible that there is something wrong with the electronic power supply

  In this case there is not much to do to contact the ASP in your country. Technicians should check the portable and should run diagnostics tests

  I recommend contacting the guys and ask for more details and manipulation still good luck and happy new year.

• My iPhone will not charge with another cable or adapter. iPhone 5. I mean this as bluntly as this can be explained. NO OTHER POWER CORD OR ADAPTER.

  my iPhone 5 will not charge with any other combination than the exact cord and adapter, I received with the phone. I tried all other options.

  Then?

  I do not understand, not the cable no longer works? Why you want to change the current mix?