HP ENVY 17-j005tx Notebook PC, AccelerometerSt.exe - open pop - start up of the system error

Similar Questions

• The engine InstallShield (iKernel.exe) could not be installed. The system cannot find the specified file.

  I am running XP Pro and I am trying to install a program, and I get this error code: motor InstallShield (iKernel.exe) could not be installed.  The system cannot find the specified file.  How can I solve this problem?  Thank you.

  Hello

  · What program are you trying to install?

  You can check the link and try the steps listed: error Ikernel.exe when you install programs by using InstallShield: http://support.microsoft.com/kb/810608

• Error message at startup: "cssauth.exe instance cannot start due to an initialization error" and also unable to open help and the file

  Original title: cssauth.exe instance cannot start, help and Support of file disable

  Whenever I connect to my windows XP, it still says cssauth.exe instance cannot start due to an initialization error and I could not open my file help and suppot. Please help me. Thank you before

  Hello

  1 how long have you been faced with this problem?
  2. don't you make changes on the computer before this problem?
  3. What is the brand and model of the computer?
  4. who help and support files are you referring to?
  5. what exactly happens when you try to open it? You get the error message?

  cssauth.exe is related to the Client Security Solution.

  Step 1: Try disabling startup cssauth.exe in the configuration of the system.

  Here's how:

  1. click on start > run.
  2. type msconfig and press ENTER.
  3. click on the Startup tab.
  4 locate cssauth.exe, and clear the check box for this.
  5 restart the computer and check for the issue.

  Step 2: If you still get the same error at startup then perform the clean boot on the computer.

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

  Reference:
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  1. click on start and then click Run.
  2. type msconfig and click OK.

  The System Configuration Utility dialog box appears.

  3. click on the tab general, click Normal Startup - load all services and device drivers and then click OK.
  4. When prompted, click on restart to restart the computer.

  I would also ask you to contact the manufacturer of the computer because the problem is with the client security software that is provided by them.

• When I click on any icon in my control panel, a black window opens and C:WINDOWS\system32\rundll32.exe is what's wrong with the system

  When I click on any icon in my control panel, a black window opens and C:WINDOWS\system32\rundll32.exe is what's wrong with the system

  {Assuming the rundll32.exe file is not found}

  See if them can restore the file rundll32.exe:
  http://support.Microsoft.com/kb/812340 Ramesh Srinivasan, Microsoft MVP [Windows Desktop Experience]

• HP ENVY 17-j005tx Notebook Finger print reader questions

  Hi all

  Already a few weeks or so, my fingerprint reading begins to play up - when I start the laptop, it seems do us somehing to the connection and logon fails permanently - when I try to open a session keyboard always fingerprint reader sends something and can not connect - it just cause connection to fail over and over in a loop.  I can just manage to turn off the laptop by clicking on the button turn off and select the off option.

  I found a reason if I hit F10 to enter the BIOS setup, e and exit, reboot all goes well.  Then I can use the fingerprint reader to log in again. Then a few weeks can go and the same thing!

  What gives?  Someone at - it suggestions? Is this a bug of material or something - it is possible to disable the fingerprint reader so that if in the future he sticks completely upward, I would at least have the ability to disable.

  Jim

  8.1 Windows x 64

  Validity Sensors, Inc. - 4.5.122.0 - 19/03/2013

  HP Simplepass 6.0.100.276

  Laptop HP ENVY 17-j005tx, HP ENVY 27 - k001a, HP ProLiant MicroServer Gen8 G2020T, HP MediaSmart EX495 Server tilt, HP MediaVault 2020, HP ENVY 120 AiO Printer

  Hey JimT.

  For the fingerprint reader not working not properly, I've included the document ' a (Windows 8) fingerprint reader troubleshooting'.» Please follow the steps in order for best results.

  So, there is a fingerprint sensor driver update digital validity. I got it here for you. This pilot has a version of the 4.5.228.0 Version and was released on 09-30-2013.

  Please let me know if these steps solved the problem, thanks.

• (3rd time) trying to win 7 pro 64 bits 10 - Setup.exe - api-ms-win-core-heap-I1 system error - included in the computer

  This error is now coming error api-ms-win-core-heap-I1-manque - Setup.exe - computer system

  I gave up on the upgrade, but now I can't download updates on ACDSee Pro, Corel Painter, Adobe, etc. - I'm very unhappy!

  I backed up my data and tried to install win 7 teacher once again, but the same error now. You can DL win 7 Pro 64-bit for me? I'll pay anything for me to get back to work!

  Have you tried to perform a restore of the system before you start, facing this problem?

  How to use System Restore (10, 8,Windows 7, Vista, XP)

  Also, try the following:

  Click Start
  Type: CMD, according to the results, right-click CMD
  Click on "Run as Administrator"
  At the command prompt, type: sfc/scannow

  This will check for any breach of integrity

  Restart your system

  You can also try to download 10 Pro 64-bit Windows, and then run a custom installation:

  How to download official Windows 10 ISO files

  then

  How to: perform a customized Windows installation

  then

  Recover personal files from the Windows.old folder, such as pictures of Documents and Windows Live Mail emails in Windows 10

• HP ENVY 17-j005tx Notebook PC: network card wireless Intel N 2230 sporadic but recurrent connection Wi Fi problems. Which driver to use?

  I have an old HP Envy computer of 12 months with a 2230 Intel® Centrino® wireless-N wireless adapter.

  In the last 6 months, the PC has suffered sporadic but recurrent problems of WiFi connection with the failure of the connection or drop-outs. The PC connects to the router, but fails to obtain or maintain an IP address. It has been with Intel driver version 15.12.0.6, pilot day February 25, 2014, installed by Windows Update, on June 16, 2014.

  When I contacted HP support on January 9, 2015, I have been instructed to download the software from the HP Web site. This driver has an HP publication date of 1 November 2013 and installed the driver version 15.10.0.12 with a release date of June 25, 2013.

  Updated Windows ran later that day there and I wanted to install the drivers updated Windows 8.1

  • Important update - update the Intel driver for Intel® Centrino® wireless-N 2230 published on 17/10/2013, 2.4 MB
  • Optional update - update the Intel driver for Intel® Centrino® wireless-N 2230 published 07/10/2014, 101.9 MB

  If Windows Update has been set to automatic the provided HP driver would likely have immediately deleted by Microsoft update.

  The Intel Web site offers the 15.14.0.1 or 15.14.0.2 driver version as the last driver for the adapter N-2230 but Intel "recommends obtain you and use the software provided by the manufacturer of your laptop. (even if it's more than a year to date)

  It's very complicated to have the latest version on the Intel site, older versions installed by Microsoft Update and even older versions on the HP website.

  If the user must install the OEM version, how the user to treat Microsoft Update overwriting the OEM version?

  Which driver should be used?

  Why didn't the driver software HP Support was updated to resolve known issues with this wireless card driver?

  HP would provide only a pilot who has been tested on the device that is installed on a particular type of material.

  Intel would release the driver first, but then it would take some time for HP to the test pilot and release it to the public for use on their units. Some customizations can apply in order to get the driver to work on the material.

• HP ENVY x 360-m6-w103dx: AccelerometerSt.exe crash at startup

  Bought this new laptop for Windows 10 a week ago. Windows did a few updates a few days previously, and now whenever I boot, I get an error message saying that the application failed to start properly. (0xc000007b)

  After finding others on this issue, I learned that it's the HP 3D DriveGuard program.  I completely uninstalled, rebooted, reinstalled sp71708.exe as recommended HERE.  Who has not solved the problem and the error message is displayed every time that the laptop starts.

  

  Hello:

  You have an unknown device in Device Manager with a hardware ID of 6007 ACPI?

  If this isn't the case, then has the problem itself and the 3D driveguard system works.

  If you do not see an unknown device with a hardware ID of ACPI 6007, this means that the 3D driveguard device does not, because the driver is not installed.

  Disadvantage of this... If accidentally fall or knock your laptop, the hard drive heads will not be parked by the accelerometer, and most likely the hard drive can be destroyed and must be replaced.

  IMO, if you drop your laptop computer, 3D driveguard probably won't help anyway, unless you dropped less than 2 feet from the ground.  That would be environ.75 of a meter on the metric system.

• damaged boot file Root\sytem32\ntoskrnl.exe, will not start even on the XP cd

  I can get to the bios but don't even start with the XP cd.

  Hello

  · What is the number and the model of the computer?

  I suggest you to use any other Windows XP CD and check if you are able to start using the disk.

  Follow the steps from the link which provides information about the same: error message: "Windows did not start because of a configuration of the disk of the computer problem": http://support.microsoft.com/kb/314477

  If the steps above do not help, you may need to contact the manufacturer of the computer.

• Explorer.exe crashing on start up and many other errors

  So a month ago, I tried to update my NVidia driver and my computer crashed at halfway. Since then, my computer did not work right and worsens day by day. Here are some pictures of errors I get to start my computer

  Please run a check of system files (SFC) 

  
  

  All instructions are in our Wiki article below...
  If you have any questions please ask us for .

  Check the file system (CFS) Scan and repair system files

• HP ENVY 15 t-j100 Quad Edition: AccelerometerST.exe 0xc000007b error

  By logging into my system, I get AccelerometerST.exe did not start successfully.  0xc000007b error.  How can I fix this error?

  Hello

  Try the following.

  Download the installer for HP 3D DriveGuard on the following link and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp67001-67500/sp67280.exe

  One time finished, open windows control panel, open programs and features, make a right click the entry for HP 3D DriveGuard and select uninstall.

  When this has completed, restart the laptop.

  When windows has reloaded, open your download folder, click with the right button on the installer for HP 3D DriveGuard and select "Run as Administrator".

  Once again, when this has completed, restart the laptop.

  Kind regards

  DP - K

• Want x 360: AccelerometerSt.exe/MSVCR110.dll question

  I recently bought a HP Envy x 360 (literally yesterday), because it was highly recommended by my help at best buy. Since yesterday afternoon, I had a problem with the display driver that comes will not be corrected.

  When I start my computer, it says that AccelerometerSt.exe does not start (give me code 0xc00007b), and when I try to run original on my computer to play the Sims, it is said that origin will not work because the 'MSVCR110.dll' file is missing, and my Google'ing suggests that the two problems are related. Also, last night I just watched a YouTube video and my display driver froze on me. Had to hard restart my computer to fix.

  I followed the instructions here: http://h30434.www3.hp.com/t5/Notebook-Operating-Systems-and-Software/AccelerometerSt-exe-system-erro...

  But it does not work. I can't find any other relevant results on here or the Microsoft page. I went on the site support.hp.com and ran the Solution and update Finder and downloaded the HP System Event Utility and Intel HD Graphics Driver, as he recommended. For some reason, my computer doesn't let me install the other driver (Intel Wireless Display Software), he suggests. I installed three times and no luck.

  I am bit out on a limb here when I bought a HP, and so far I'll have nothing but issues. The site I linked above says that somehow that this file has been deleted, but I don't know how. Is it possible to fix this, or do I have to go back to my laptop?

  Thank you

  Jordan

  Hi, Jordan:

  This error is related to a problem with the system 3D driveguard which parks the hard drive heads in case the laptop is deleted or moved.

  Several times, just reinstall the 3D driveguard driver support for your laptop and driver page solves the problem and in some cases, it doesn't.  The last thread I posted goes into some more detail if throwing everything simply installation does not work, but do not use the pilot who was listed.  You can only run one on your laptop specific assistance page... There are 3 versions of hardware 3D driveguard all using different drivers.

  You can see that ces-related posts where this worked.  There are many others...

  http://h30434.www3.HP.com/T5/notebook-operating-systems-and-software/AccelerometerSt-exe-application-error/m-p/5231870/highlight/true#M312779

  http://h30434.www3.HP.com/T5/notebook-operating-systems-and-software/AccelerometerSt-exe-error-0xc000007b-on-startup/m-p/5206116/highlight/true#M309424

  http://h30434.www3.HP.com/T5/notebook-operating-systems-and-software/AccelerometerSt-exe-system-error-mfc110u-DLL-is-missing/m-p/4715866/highlight/true#M269123

  If this does not work for you, then I suggest you contact HP support, or if you can always return the laptop, then you can do the same.

• Pavilion x 360: AccelerometerSt.exe - Application error

  From the start, I get the following error.

  AccelerometerST.exe - Application error - the application failed to start correctly (0xc000007b).  Click OK to close the application.

  My system shows now that he needs for the update but it will not complete the process.  No matter if I select shut down or restart.

  It started a few weeks ago.  What should I do about it?

  Hello

  Try the following.

  Open Windows Control Panel, open programs and features, make a right click the entry for HP 3D DriveGuard and select uninstall - don't worry if you get an error at this point, just continue.

  When this has completed, restart the laptop.

  When windows has reloaded, download and install the version of HP 3D DriveGuard on the following link.

  http://ftp.HP.com/pub/SoftPaq/sp67001-67500/sp67280.exe

  Kind regards

  DP - K

• HP Envy 15-k081nr: AccelerometerSt.exe - system error

  When I start my computer, I get an error message saying:

  "AccelerometerSt.exe - system error."

  The program cannot start because mfc120u.dll is missing on your computer.

  Try reinstalling the program to fix this problem. »

  Where can I find this program? Any help on this issue would be greatly appreciated.

  Hello:

  Try the latest version of the driver and see if it works...

  This package provides the software HP 3D DriveGuard to the notebook models that are running a supported operating system. HP 3D DriveGuard software protects the drive hard by parking the heads if cell phone accidentally falls, or is suddenly struck by another object.

  FTP://ftp.HP.com/pub/SoftPaq/sp75501-76000/sp75979.exe

• HP Envy 17 LOL32PA #ABG: AccelerometerSt.exe - (0xc000007b) error at startup

  After that I upgraded my laptop Windows 10 of 8.1 to Windows at startup after a while, I would get an error message for the so-called AccelerometerSt.exe gives me error (0xc000007b). How can I get rid of him? After some googling, I found that it happened on Windows 8.1 a little and that it has something to do with HP 3D Driveguard, well I'm not too sure.

  Yes. Accelerometer is a part of the software of HP 3D DriveGuard. Please uninstall the program and download and install the Windows 10 compatible HP 3D DriveGuard software from the following link:

  FTP://ftp.HP.com/pub/SoftPaq/sp71501-72000/sp71708.exe

  Here is the link that explains how to uninstall the program in Windows 10:

  http://blog.LapTopMag.com/uninstall-programs-Windows-10