HP ENVY 17-j112tx Leap Motion: Overclocking my HP ENVY 17-j112tx Leap Motion SE Notebook PC (ENERGY STAR)

Hey all,.

My laptop that I liked for the time I got it, so a pretty good personal camera all-round.

However as I just realized, the processor isn't quite cut. For these unfimilair with this product, it's Intel Core i7-4702MQ CPU @ 2.20 GHz. Which is decent except the Gigahertz.

And as I came to learn, the BIOS Overclocking locked so my question to you is if I can overclock my processor in anyway eventually (even with a cost?). I'd give perfer to keep this laptop as it has a 16gbs of ram and a decent graphics card!

Thanks in advance.
Brock

Hello

My loan last year machine was a HP ENVY 17 t-j100 Leap Motion SE Notebook PC (ENERGY STAR) (t for machine CTO). My current loan machine is also a HP Envy 17 t wGen 5 CPU and best card NVIDIA but no movement of jump. They are great machines. But for overclocking, you need to buy any other kind of laptop, the Envy series will not support it.

Kind regards.

Tags: Notebooks

Similar Questions

  • need to reset my HP ENVY 17 t-k000 CTO Notebook PC (ENERGY STAR)

    HP ENVY 17 t-k000 CTO Notebook PC (ENERGY STAR)

    I need a recovery kit for my cause of laptop I did upgraded for Windows 8, Windows 10 but it shows not winth 10 windows partition so I can't launch the LT.

    I have contact the HP SUPPORT but no way of didn't have the recovery disk set... can anyone here like me where I can buy it

    Hello

    If you definetely can't get HP recovery media, here are a few suggestions.

    1. if you live in the United States, try the 3rd dealer part on the following link.

    http://www.computersurgeons.com/default.aspx

    2 as long as the previous installation of Windows 10 had activated Ok after upgrade from 8.1, you can simply perform a new installation of windows 10 as stated in the guide on the following link.  Note: On the activation screen, select "I don't have a product key" - Windows will activate automatically once installation is complete.

    http://www.howtogeek.com/224342/how-to-clean-install-Windows-10/

    Kind regards

    DP - K

  • Laptop HP ENVY 15 t-k000 CTO: add additional SSD for HP ENVY 15 t-k000 CTO Notebook PC (ENERGY STAR)

    Hello.

    I have my laptop new HP ENVY 15 t-k000 CTO Notebook PC (ENERGY STAR) yesterday itself. He already have writer BRD. Can I replace my BRD burner with extra HD SSD? If yes what is the procedure for that?

    You can, but you shouldn't. The port for the optical drive is a SATA-I have the interface. Slower than the port for HDD/SSD. So if you want to just add storage put a regular mechanical training in an optical drive adapter. Also any drive in the optical drive adapter will not be bootable. This will help you:

    http://support.HP.com/us-en/document/c04334360

    http://www.eBay.com/ITM/new-SATA-2nd-HDD-SSD-Caddy-adapter-for-laptops-9-5mm-optical-hard-drive-Bay-F-HP-/221242700734?PT=LH_DefaultDomain_0&hash=item338317b3be

    If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

  • HP ENVY 17 t-k000 CTO laptop: HP ENVY 17 t-k000 CTO Notebook PC (ENERGY STAR) Bios Update Question

    My Hp Support Assistant wants me to update my bios...

    I have two questions regarding this.

    1. the software to Flash the bios is not compatiable with windows 10.  It will be safe to run anyway? (Yes, I have installed a free update to windows 10)

    2 sp71055.exe f42.ap1 (corresponds to the file, it is recommended to run to my i7 from intel, patch notes (always never enough information) provide that it restores or that it provides the original bios.)

    My bios version connected is

    BIOS version / date f/34. 12-19-2014

    On a previous occasion, I thought I already flashed the bios and I was wondering if I need to restore to the original version, or it turns out is a bit 'off '.

    The link you have provided updated the bios with no ill affects (for now!) Thank you for your help

  • HP ENVY 15 Notebook PC G0T55AV: HP ENVY 15 t-k000 CTO Notebook PC (ENERGY STAR)

    One of my biggest complaints about this laptop is that pressing a key of function (F1-F12) by itself accomplishes what is the picture on it. For example, if I wanted to use a function key to do something like the open dialog box the "save under" in Microsoft Office programs, I have to press the "fn" and "F12" keys at the same time, instead of just "F12". Although I know there are ways around this (adding commands to the toolbar "quick access", pressing "ctrl" + "s", etc.), it would be nice if I could just press "F12". I have excellent use of my left hand, my right hand doesn't work too well, so using both hands can be tricky. Is it possible to reprogram the 'F1' through 'F12' keys?

    Hello

    You can change the default behavior as follows.

    Shut down the laptop.  Tap away at the esc you key start Notepad to open the Start Menu.  Select the Bios ( f10 ) option, and then change the figure in the document at the following link.

    http://support.HP.com/us-en/document/c02035108

    Kind regards

    DP - K

  • HP ENVY 17 t-j100 Leap Motion QE Notebook PC Port HDMI highest video resolution

    What is the maximum video resolution that can be supported with the HDMI output of the GeForce GT 750 M graphics card? I get a new "HP ENVY 17 t-j100 Leap Motion QE Notebook PC (ENERGY STAR)" as a guarantee of replacement for an older PC and new PC has only a HDMI connector for an external monitor. The GeForce GT 750 M graphics card will come with 4096 MB memory installed in it. I considering buying a series ASUS PB278Q LCD monitor and would like to know if its resolution 2560 x 1440 WQHD input is supported by Geforce GT 750 M graphics card. The entrance to the Asus monitor is HDMI version 1.4. As I understand it, if the PC's HDMI output is version 1.3 or later, it should be able to handle up to a 2560 x 1600 resolution monitor.

    I received my replacement 'HP ENVY 17 t-j100 Leap Motion QE Notebook PC (ENERGY STAR)' PC and found that I was able to use my monitor 27 '' Dell in its resolution full 1920 x 1200 with a HDMI to DVI cable - D. The cable I used was an AmazonBasics HDMI to DVI adapter cable (9.8 feet/3.0 meters), I bought from Amazon.com for $7.99, http://www.amazon.com/gp/product/B001TH7T2U/ref=oh_details_o02_s00_i00?ie=UTF8&psc=1. I still have not been able to confirm the maximum resolution that can be financed by this PC, but either I have to upgrade to a new monitor because I can use my existing at its full resolution.

  • HP ENVY laptop - 17-k200ns: pilot beats audio for HP ENVY laptop - 17-k200ns (ENERGY STAR)

    Please could someone tell me where I could download the driver for this laptop audio beats:

    Laptop HP ENVY - 17-k200ns (ENERGY STAR)?

    Hello

    Bat should be included in the Driver Audio Realtek High definition (HD):

    http://ftp.HP.com/pub/SoftPaq/sp69501-70000/sp69618.exe

    http://support.HP.com/us-en/drivers/selfservice/HP-envy-17-notebook-PC-series/7527536/model/7709875

    Kind regards.

  • HP ENVY 15-360-w107ne x (ENER: HP ENVY x 360-15-w107ne (ENERGY STAR))

    Hello

    I have a small quastion

    can I put the dedicated NVIDIA GeForce 930 M (2 GB DDR3L) chart to the model HP ENVY x 360-15-w107ne (ENERGY STAR) to 4 GB?

    Thank you

    Hello

    Unfortunately not, the Nvidia gpu chip is integrated with the system board and is not an evolutionary element.

    Kind regards

    DP - K

  • Envy 15 t-q100 Quad Edition CTO: Envy 15 t-q100 Quad Edition CTO (ENERGY STAR) at 2560x1440p?

    I am looking to buy a 2560x1440p monitor to use as an external monitor with my laptop Envy 15 t-q100 Quad Edition CTO (ENERGY STAR) . Can this laptop complete 2560x1440p run via HDMI with Windows 10?

    Hello

    No, its maintenance and Service of Guide:

    ● HP Smart AC adapter
    ● audio input (mono microphone) / jack combo audio output (stereo headphones)
    ● HDMI v1.4 support up to 1920 × 1080 @ 60 Hz
    ● RJ45 (Ethernet)
    ● USB: two USB 3.0 ports, two USB 2.0 ports

    http://support.HP.com/us-en/product/HP-envy-15-notebook-PC-series/7258295/model/7200495/manuals

    Kind regards.

  • HP ENVY 15-360-u483cl x (ENER: is it possible to add an externel gpu in HP ENVY x 360-15-u483cl (ENERGY STAR)?)

    Is it possible to add an externel gpu in HP ENVY x 360-15-u483cl (ENERGY STAR)?

    :'( :'( :'(

  • HP ENVY 15 t-j000 Quad Edition: HP ENVY 15 t-j000 Quad Edition Notebook PC - white screen

    Hello

    I have a HP ENVY 15 t-j000 Quad Edition Notebook PC. Recently I started to notice a problem on my laptop.  I have some...

    Help, please!

    Hey @HPENVY15t-j000,.

    Unfortunately your laptop is not setup for a touch screen. This is a link to your page 27 manual replacement parts.

    I hope this helps.

    Thank you.

  • HP ENVY dv6t-7300 CTO Select Edition Notebook

    I have a HP ENVY dv6t-7300 CTO Select Edition Notebook PC, Ralink 802.11 b/g/n WiFi adapt when I updated to windows 8.1 the wi fi will not connect to the web, it just gives me limited connection, Microsoft said that it may not be window 8.1 compatible with anyone knows about it?

    At out the battery and put it back over the laptop and it now apears to be good.

  • HP ENVY laptop - 15-k103nx (ENERGY STAR) Bios fan problem

    Dear Sir.

    I just got my new

    HP ENVY laptop - 15-k103nx (ENERGY STAR) for 7 days now

    It was a prefect job until she can make update started giving an error when booting up to the

    "THE system BIOS has detected a possible problem with the cooling fan.

     

    The cooling fan is an important part of a laptop. Operating a laptop for a long period of time with on the cooling fan can cause permanent damage to the laptop.

    Cooling fan (902)

    ENTER - stop

    I searched for this error and the solution was to update my bios and I must therefore my bios is now F.33 and until the same problem someone can help or I have him go to the store > thank you

    Thank you
    That's what I was doing.
    I give back it to my dealer and I got new Asus labtop

  • Want to 15 t k000 CTO (Energy Star): HP Envy 15t k000 CTO support m2280 ngff SSD?

    I just bought a laptop K000 CTO Envy 15 t and want to ADD an SSD as drive system. At the same time, I want to keep the original HARD disk in its place as a storage for photos and videos. I found a manual on hp.com and K000 model told a m2280 slot.

    So I wonder if I could buy a m2280 SSD and install the operating system in it while keeping the HARD drive and the optical drive.

    Well I just disassembled the system board and peeked inside. Now, I can confirm that the Envy 15 t k000 CTO model does not have a SSD m2280 slot although the manual says it have. In fact, there is space for the slot behind the motherboard and the size should be m2280. But the fact is that there is no such accommodation. Too bad.

    If you want to add an SSD to the laptop, you will need to replace by a SATA III SSD HARD drive.  The HARD drive can replace the optical drive, if you want to keep the HARD disk as the storage.

  • Want 15t_j100 Quad E2E34AV Ed: 10 Windows upgrade failed - blinking display of Envy 15 t-j100 Quad Edition Notebook PC

    Upgrade Windows 10 failed on my Envy 15 t-j100 Quad Edition laptop.

    Symptom after upgrade has been a video exhibition quickly flashing without control of the PC.

    I have to go back to the previous version - Windows 8.1.

    Back with success on Windows 8.1

    Symptoms point to video card problem after updated Windows at level 10.

    My laptop has two, provided by HP online:

    Intel HD 4600 Grapics (internal)

    NVIDIA GeForce GT 740M

    See the research, that Intel and NVIDIA have Windows 10 drivers for these graphics cards.

    Yet immediately when Windows 10 signing after upgrade, the laptop display has been viewed quickly.

    The only way I could get control of the laptop was CTL-ALT-DELETE to start the Task Manager.

    The Task Manager showed that more CPU resources would "host setting synchronization process.

    Called Microsoft Support - they indicate a likely problem with display adapter driver and advised to "go back" and then contact HP support.   called HP Support and they advised to work with Microsoft.  Great!

    Would appreciate recommendations on the way forward for Windows 10.

    Dgood43 wrote:

    Initially I found the 10.18.13.5324 Rev.A-NVIDIA graphics driver.

    I was allowing the HP site automatically detect my curent - Windows OS 8.1.

    When I manually switched OS Windows 10, I see it listed.

    I also see 10.18.15.4248 that place listed for the Intel HD 4600 graphics card.

    Can I install both of these drivers before you upgrade Windows 10?

    Both are supported on Windows 8.1?

    If so, why HP Support Assistant would not have install me the upgrade?

    Am I missing something here?

    Install only the softpaq grahips from Nvidia. It will allow to install the two drivers.

    When I click on the button 'Download' blue, it offers two choices:

    Use HP download and install the Wizard (recommended)

    Download only

    This is the second option that you recommend when you say to use "usb flash drive support? Yes. Create an installer of Flash 10 Windows usb player. This is the second choice option.

    Thanks again for your help!

Maybe you are looking for

  • Omstart av HP pavilion p6000 series

    JAG behover hur man starta om PC som den var NY nar tips. Har en en 'Reperationsskiva Windows 7' backupp skivar. Finns in wireless start-up/sdi-thread = 3096 KB + wire-WIM-start = Ko 365341. Gor Hur man? debt 42

  • No Signal after installing new graphics card

    Hello and thank you in advance for your help! We have a 2 years old HP p6540y.  It has an ATI video card integrated. When we recently turned on, we got a message "no signal" on the monitor and then he'd go to sleep.  We tried many things to fix... li

  • Want to save the file under a name of controls (Boolean Tick)

    Hi all I have a lot on the front as option 1 Panel_One 2 Panel_Two 3.Panel_Three As the user selects on it this name must be indicated in the name of the file. But its boolean then how to transfer the Boolean tick as file name label? It should also i

  • HP OFFICEJET 5600: UNABLE TO SCAN

    Can I print using my HP Officejet 5600. When I open the Solutions Center to scan or another function, it displays a printer I use not i.e. HP Officejet 5600 Series Fax. Please tell us how to change the setting for HP Officejet 5600 so that I can scan

  • Retrieving information from a CD may be damaged

    I have a CD with a WMV file that I've not used for years I thought I had lost.  I just found it (it is not in the best conditions) and my computer does not read it.  The drive sounds like it is reading and then nothing happens.  I understand that thi