HP ENVY 17 j180ca: Windows 8 and Windows 7 dualboot

Hello community. This is my first post so I apologize if I post in the category wrong forum.

I have a HP ENVY 17j180ca delivered pre-installed with Windows 8.1 x 64. I'm not the biggest fan of the operating system, so I pulled out my copy of Windows 7 Ultimate x 64 for dual boot. Installation of Windows 7 passed without worries, however, finding drivers appear to be a challenge. I post a screenshot of the drivers I need, but is one of the drivers that I need my wireless, so I am writing this post on my installation of Windows 8.1. Any help would be greatly appreciated!

Hello

Thanks for the reply, and here are the drivers-

http://support.HP.com/us-en/drivers/selfservice/HP-envy-17-J100-notebook-PC-series/5401174/model/7479990#Z7_3054ICK0KGTE30AQO5O3KA30R1

Under driver - keyboard, mouse and input devices (2), the first link is for driver Touchpad Synaptic and second link for validity fingerprint sensor driver.

Driver - network (4), the third link belongs to the local area network (LAN) Realtek driver.

Driver - Chipset (4), the fourth link belongs to your Intel USB 3.0 Host Controller Driver.

Audio driver is the first option.

And in fact I recommend installing these drivers. Write us back and let us know if things are working very well.

Although I work for HP, but I am personally.

Please click "Accept as Solution" If you feel my post solved your problem, it will help others find the solution. Click on the 'Bravo Thumbs Up' on the left to say 'Thank you' for helping!

Concerning

Aks3621

Tags: Notebooks

Similar Questions

  • Envy 17 - j020us Windows 7 drivers missing

    Hello

    I just bought a HP Envy 17 - j020us today. It came stock with Windows 8 is installed and I have, for my own reasons, decided to install Windows 7 above. Long story short, the installation has worked, for the most part. The only problem was that I was missing some drivers. I searched and found http://h30434.www3.hp.com/t5/Notebook-Operating-Systems-and-Software/ENVY-17-j020us-windows-7-driver... which was very helpful. However, there's still about 3 pieces of material that is not installed, the drivers with the network controller. I have attached hardware IDS and compatible IDS is available upon request for any "missing" material below. Can someone help me find the drivers?

    Network controller - hardware ID:

    PCI\VEN_8086 & DEV_0887 & SUBSYS_40628086 & REV_C4

    PCI\VEN_8086 & DEV_0887 & SUBSYS_40628086

    PCI\VEN_8086 & DEV_0887 & CC_028000

    PCI\VEN_8086 & DEV_0887 & CC_0280

    Feature 'Unknown' - hardware ID:

    USB\VID_138A & PID_0050 & REV_0060

    USB\VID_138A & PID_0050

    Feature 'Unknown' - hardware ID:

    ACPI\INT33A0

    * INT33A0

    Any help would be appreciated. Thank you

    Hello

    Please try:

    1. network: http://ftp.hp.com/pub/softpaq/sp57501-58000/sp57976.exe

    2 validity sensor: ftp://15.217.49.73/pub/softpaq/sp45001-45500/sp45050.exe

    3 Please try: https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=20866

    Kind regards.

  • J053ea HP Envy 17 - using the touchpad and keyboard simultaneously

    I just bought the laptop of HP Envy 17 in Windows 8.

    One problem I have is when running games such as Call of Duty, I need to be able to use the touchpad with the keyboard to control the game properly.  It seems that, once I have a key that is pressed, the computer does not accept any entrance of the touchpad until I release the key.

    Will there be an option in the Panel, maybe I need to change to enable the simultaneous entry of keyboard and the touchpad?

    Thank you.

    Hello

    This problem may be caused by a touchpad setting which is intended to avoid any accidental activation - for example if your Palm brush the touchpad when typing.

    You can change this as follows.

    Open windows control panel and on the top right, next to the display by: select "large icons".  In the new page layout, select the entry of Synaptics.

    The hardware/software version will depend on real option that you're looking for (see the example below), but it is usually called 'check' Palm or Smart Sense'-disable this function and apply the changes.

    Kind regards

    DP - K

  • HP ENVY 17-j180ca Notebook PC - monitor

    I just bought the laptop of HP ENVY 17-j180ca. I'm trying to calibrate my monitor for photo editing. The software I use to calibrate the monitor with a two questions, that I don't have the answers...

    1. is the normal or wide range?

    2. is the backlit monitor with CCFL Fluorescent, white LEDS or RGB LED?

    Help, please! I can't find this information.

    Thank you

    Amanda

    The display is a type of backlight WLED, no RGB LED.

    The color range is located in the District of 68%.

    Even an iMac with a Retina display provides a wide range of colors.

  • HP Envy 15 153tx: Windows 10: buttons brightness and the controller does not

    Greetings,

    Last night I upgraded Windows 8.1 to Windows 10. Since the controller buttons and brightness and the option to choose the power settings in Windows 10 did not. Brightness worked well in point 8.1 of WIndows.

    I use HP Envy 15-153tx.

    Thank you.

    I've updated to the latest drivers provided by HP Support for Windows 10 and the problem disappeared. Now I can control the brightness of my rig.

    Chapter is closed.

  • HP envy dv6 with windows 8 and hp officejet pro 8600.

    I have a new computer laptop dv6 with envy, (i5, 6 GB of ram, windows 8) cannot communicate with my hp officejet pro 8600 Workbench. I can connect between laptops (dell inspiron w / win 7) to connect to the internet and browse the entire network. I can ping the IP address of the printer, (192.168.0.115), very well. I downloaded the latest version of the software of hp and used to install. Search software of the printer, rather than choose a network or via the network, it requires only a new printer. Everything on the printer is network that worked very well, wireless, eprint, etc.. What I am doing wrong?

    Hello scriptripper,

    Anti Virus programs are usually the first thing to look at when it comes down to not install software or things don't not communication between the computer and other network plug.

    It's a piece of both sides. A risk on the one hand, it's great that it is made it is work and no risk of blocking, but fails when it comes down to it block do you your own work.

    I have used AVG for years and it works very well and is free, after making the switch to MSE (Microsoft Security Essentials), about a year and a half before, have no feel the need to turn it back on.

  • HP ENVY - 14 t Windows 7 Prof: NVIDIA incompatible with windows 7 64 bit and always crush when you watch videos using any Explorer

    Hi all

    I had several times a day with my computer and all can make crashes is forced to stop by the power button on my laptop. Whenever my computer started, NVIDIA appears a windows says:

    "C:\Users\AppDATA\Local\NVIDIA\NvBackend\ApplicationOntology\NvOAWrapperCache.exe cannot start or run due to incompatibility with 64-bit Windows versions."

    So I was wondering if this is the reason to crush and my laptop always down when I use Chrome for Youtbute frequently.

    My hardward is NVIDIA GeForce 940 M.

    Thanks for any answers or help in advance.

    Hello piggyiszzz,

    Here I paste the link for the driver that should solve your problem

    http://www.GeForce.com/drivers/results/107562

    This driver is up to date.

    Can you try to install and let me know.

    Concerning

  • ENVY 15 t-ae000: (F2 and F3) brightness control keys do not work after update bios and Windows 10 update

    After that I upgraded to the latest version of the BIOS and upgraded to Windows 10, brightness controls no londer work.

    Would appreciate any help.  Thank you

    Hello

    If your laptop uses Nvidia Optimus (Intel + Nvidia GPU), try to download and reinstall the Intel HD graphics driver on the following link.

    http://ftp.HP.com/pub/SoftPaq/sp74501-75000/sp74569.exe

    When reinstalling, restart the laptop.

    Kind regards

    DP - K

  • HP envy 6 formatted windows 7 family base and not able to install windows 7 ultimate

    my laptop is hp envy6 1011tu. and it came with windows 7 home basic.i due to format the laptop because the very slow process. first of all I tried to do the recovery of the system with hp support assistant, but the option was not functional for some reason any. then I made a support recovery, but even in this laptop case started normally, nothing happened. Then, I made a bootable iso image of windows 7 ultimate power with usb and formatted the laptop. but when the installation was complete, it displays error, saying cannot complete the installation because of hardware bundles. reboot to reinstall windows. and then I did it again, but once again the same result.  After that I tried to install win 7 home base using the recovery disk, but it displays error because of recent hardware and software changes could not complete the operation. I even tried to install ubuntu using the bootable usb key, but its saying no OS not detected in the inserted disc.

    Please help, what to do next. the product is under warranty. I bought it last October.

    Hello

    In this case, I would say try the SP1 version because it contains more hardware drivers - the link below for Windows 7 Ultimate SP1 64-bit (the source is Digital River).

    http://MSFT.digitalrivercontent.NET/win/X17-24395.ISO

    I recommend also using the Microsoft tool on the link below to create the bootable flash drive.

    http://www.microsoftstore.com/store/msusa/HTML/pbPage.Help_Win7_usbdvd_dwnTool

    Kind regards

    DP - K

  • Update the bios HP Envy 15 t, Windows 8.1, stripped of the keyboard backlight and messed up the function keys

    I bought a HP ENVY 15 t-j100 Quad Edition CTO Notebook PC about a month ago.

    Yesterday an update of the bios was downloaded from HP and implemented.

    The backlight on the keyboard has been disabled. I want to come back.

    Also, I need to have their ordinary functions, unless you press the shift of fn, function keys.

    I couldn't find the option for the backlight I have the information available. Here's the option in the BIOS to enable/disable the use of the fn key.

    Please check if there are options for the backlight. In the meantime, I will try also to find information to activate the backlight. You can try using the keys F4 or Fn + F11 to toggle the backlight on the keyboard.

  • BlueRays disks will not play the HP Envy 17 with Windows 8.1 and Cyberlink Media Suite and Power DVD

    DVD will load successfully and play, but BlueRays won't, even if this computer has a BlueRay player and Cyberlink software to play.  It recognizes the title of BlueRay, seems to load the disc then returns to the initial screen and does nothing.  When I click on play, Cyberlink application if I want to restart or resume playback.  Either select the button comes back to me early in the process.  Any suggestions?

    I downloaded sp63425.exe earlier today.  Which corrects the problem.  Thanks a lot for your help!

  • HP Envy 15-ah100na: Windows 7 on HP envy 15-ah100na network problem

    Hello

    I installed Windows 7 on my HP Envy 15-ah100na laptop that I didn't like Windows 10. I now cannot connect to wireless or wired as the laptop appear to have no ethernet controller or the network is installed.

    Someone at - it a link to where I can download the drivers for the network controllers?

    Thank you.

    You are the very welcome.

    Here are the drivers wireless and bluetooth from W7 for this model of the wlan card.

    This package contains drivers for the Intel Wireless LAN card of supported models running a supported operating system.

    http://ftp.HP.com/pub/SoftPaq/sp76001-76500/sp76279.exe

    This package contains the installation package driver for the Bluetooth of Intel in the laptop models running a supported operating systems.

    http://ftp.HP.com/pub/SoftPaq/sp77001-77500/sp77324.exe

  • HP envy 700-414: HP Envy 700-414 Windows 7 driver network controller says I don't meet the minimum requirements

    I recently installed Windows 7 on my hp envy 700-414 and missing a lot of pilots. A user by the name of banhiem gave me a link to download the drivers of a 700-230 hp envy. After I did it, I clicked on another link, it gave me to install the Realtek network controller. Whenever I tried to install the driver, it would tell me that I did not meet the requirements. Other drivers work fine now, except the network controller. The steps on how to fix this error would be greatly appreciated.

    Hello:

    See if this card wireless driver works...

    The package contains the Broadcom wireless LAN drivers and utility which are required to enable the LAN adapter wireless Broadcom integrated in the supported models that run an operating system supported.

    FTP://ftp.HP.com/pub/SoftPaq/sp70501-71000/sp70888.exe

  • HP Envy 17-n009a: windows 10 hp envy 17-n009a

    The Integrated Intel Graphics HD5500 reports as being compatible with the blu - ray, (it is not possible to pass the 940 m Nvidia on this machine).

    But the driver of Windows 10 Intel HD5500 reports as not not compatible?

    (Using the latest driver on the HP download site).

    SDF15,

    Thanks for the suggestion, but I've made some progress today.

    If I select the integrated graphic card driver, Adviser of Cyberlink Blu - Ray runs using the Nvidia 940 M driver card and the driver reports as support Blu - Ray.

    I had tried previously to run this test by selecting the NVIDIA processor high-performance and driver as reports not supported, which is a strange result.

    Compliance IHE Cyberlink Blu - Ray test only works if the option of integrated graphics driver is enabled.

    I also tried this test using the Intel HD5500 driver and the driver also failed the test of conformity of Blu - Ray. Even if the graphics card reports as Blu - Ray compatible.

    Using the graphics driver integrated all key criteria now give a pass (I'm running with an external USB3 Blu - Ray drive as this machine is equipped with a DVD - RW).

    Even if all the criteria now pass, PowerDVD 15 gives the error 80040111 classic that is usually reported if the machine is not HDCP.

    I provide Cyberlink to see why the HP Envy 17 - n009a is unable to read blu - ray, even if it passes all the criteria of the Blu - Ray Advisor.

    Thanks for your suggestion. Furthermore, Windows 10 940 M Nvidia driver on the HP site for this laptop gives error file corrupted during extraction. I have raised a case with HP about this.

  • laptop HP envy 17 TS: windows driver 10 hp truevision hd for youcam?

    I see I'm not the only one with this problem.  Win 10 update seems to have deleted the driver for my webcam.  I tried to reinstall youcam, no luck.  Has anyone fixed this yet?

    Yay!   Solved!   I have a HP Envy touch screen.  He was originally with victory 8.1 and some delivered the software, which included 6 Youcam, the software to use the built in HP Truevision webcam.  I have not upgraded to win10 no problem.  Then I started having problems with my Start menu and programs it does not.  I could do a click on a few of them, but just click on them to open them did nothing.  I set up with it for a little while and then get frustrated enough to reinstall windows.  I think that I have the place in improved, or refresh - one who starts as new windows and records everything you had in the Windows.Old folder.   When I did this, all my software group has been deleted, including Youcam.   A few weeks later my Start menu stop working again and I had to do the win10 reinstall again.  I don't know what option I did the installation with the second time, but my file to win.old has now disappeared, as well as all the myself programs installed.  Now the webcam did not work.  I downloaded another version of Youcam - my version of software was not free to download and I wasn't about to pay for something that was initially provided with my computer for free, and I had no idea of what I could do or who to call to do not have to pay for it again.  I think it was 2 Youcam.   It was impossible to capture images.  The little light next to the camera, indicating that he was working, so I was sure that it was not a hardware problem.  When I looked in the settings I coulkd see she was using the HP Truevision webcam.  It just did not work.  I tried to make updates, Win10 and Cyberlink.  I uninstalled the webcam, reinstalled, tried to roll back the driver, all that jazz. That didn't fix it.  I looked on the Forum and found other people had similar issues, but I saw none that was remidied it.  Something about the embedded version of Youcam seems vital for the webcam not work at all.   I scoured my hard drive and found in my Program Files (x 86), my Cyberlink folder still had a Youcam6 record.  And the .exe program!   I ran it... and he did the same error "unable to capture.    I think that's when I posted in the forums here.  I was frustrated and doesn't bother with it more until yesterday.  I decided to try once more.   I ran Youcam6 (had to go again in Progran files (x 86) to do, but this time, I made a shortcut).  Same mistake.  I went into the Device Manager and uninstalled the Hp Truevision webcam.  Ran Youcam yet again, no camera detected.  With Youcam always on I went back to the Device Manager and search for new devices and immediately returned to the Youcam window and now it says "we have detected you have Hp truevision webcam, you want to use this device?  I clicked on ok, the box of image capture flashed different colors for a second, then was filled with the image of the room behind me and myself.  It worked!   Just in time, too.   My next idea was to see if drop shot it would help.

Maybe you are looking for