HP Envy 17 P # F1J39AV: Turbo Boost does not activate

Similar Questions

• X 230-Turbo Boost does not work when there is only the AC

  I changed the power manager in the State of Performance Max, but when he has only AC, Turbo Boost does not work. I need to install the battary simultaneously to do the Turbo Boost. If there is only battary, Turbo Boost can function normally.

  I googled this problem and it is said that Lenovo is doing this in order to avoid the lack of power when there is AC only.  How could I do Turbo Boost only works with AC (without battary on)?

  "evening.

  Welcome to the community!

  There are here some information that suggests that a 90 Watt power adapter will allow what you want, but I am mobile at the moment so my research capabilities are limited. Personally, I can't confirm that it works, however, I've never run without battery.

  Kind regards.

• Inspiron 5520 with i7 3632QM - Turbo Boost does not

  Hello, I have an Inspiron 5520 who originally i3 2370 Mr. I upgraded the CPU to i7 3632QM and it works perfectly, but I discovered that Turbo Boost is not activate during labor. This is the diagnosis of HWinfo:

  

  As you can see, it shows that the Turbo Boost is not enabled. And my tests, I can definitely say that the CPU's maximum speed is rated - 2, 2 GHz without any still on the rise according to the specifications of Turbo.

  Also, I tried to install the Intel Turbo Boost monitor utility, but it gave an error saying that it cannot find CPU with Turbo Boost support. But the 3632QM says of course.

  BIOS settings have not all Turbo Boost options so it can be turned on/off from there. The version of the BIOS is available last A14.

  Why Turbo cannot be enabled on this laptop? And I saw that many other people with different computers cannot do as well. It's so unfortunate and unfair. :( How can I enable it? You are looking for your help please.

  Problem solved, I loaded a [security] default BIOS settings. Turbo Boost now works normally. Looks like it was necessary for the motherboard/BIOS card recalibrate after replacing the CPU.

  

  

  

  

• Y580 Turbo Boost does not work except if hooked up

  While watching a youtube HD video, I noticed the processor did not work properly and that's why the video was stuttering. I checked and the intel turbo boost on a monitor version 2.6 and it showed that even on dynamic graphics Lenovo plan power than the processor was not using turbo boost. When running on the battery, the monitor displays also a leaf green and written below is "Energy Saver". If I plug the charger in the laptop, the problem goes away and I can see the Turbo works very well and with it the sheet and the "Energy Saver" will too.

  I've changed developed and even power settings made the processor state minimum 100% of battery, just as connected, so that it works just as well, but nothing helps. So I would like to know why the turbo boost function does not work then on the battery and only plugged him.

  yurajgill10,

  Intel's mode require more power that the battery can supply so it works only when the AC is plugged.

  Hope that helps.

• Turbo boost does not work when active hyperthreading - W520

  I have ignored this issue for a long time, until I've decided to try to understand and fix it. My W520 would never go beyond 2.40 GHz, I tried all the tests in the book. Manager power AC power, BIOS enabled, the max value performance in what concerns all, power settings windows too. stress tests, single thread, multi-threaded, has no importance, it has always been to 2.40 GHz or less (800 idling). After much trial and error, I found that this turbo would work properly if hyperthreading is disabled in the BIOS. The CPU module and then between 800 MHz to 3.5 GHz as it should with active turbo. Why can I not use hyperthreading AND turbo? Is this normal?

  I also noticed that in the BIOS there is no option for turbo-boost. Just hyperthreading, multi-core and speedstep.

  W520, i7-2760qm, BIOS 1.40, all the latest recommended updates.

  
  

• Turbo Boost does not X 201 without battery

  Hello...

  I have a X 201 Tablet with Core i7 640 cpu

  When I deattach the battery, the Turbo is disabled and my labtop works on minimum speed!

  I've updated powermanger and this is the latest (6.32)

  Please advise me

  Best regards

  Alex

  Hi Nicollo and welcome to the Lenovo user community!

  It is by design - you have the power to the system removed part. A higher power supply adapter can eliminate this problem.

  http://forums.Lenovo.com/T5/welcome-FAQs-knowledge-base/should-I-run-with-my-battery-in-or-out/Ta-p/...

  I hope this helps!

• Why my iPhone 4S (ios 9.3.5) does not activate the messages using my apple ID?

  Why my iPhone 4S (ios 9.3.5) does not activate the messages using my apple ID?

  Michael T.L. says:

  Why my iPhone 4S (ios 9.3.5) does not activate the messages using my apple ID?

  If you get an error when you try to activate FaceTime - Apple Support or iMessage

• Windows does not ACTIVATE WINDOWS can't

  PLEASE HELP ME!

  I did a restore and recovery backup because only my WINDOWS 8 stopped to update and gave me problems with speed. I did everything you can imagine. I even run the tweaking.com from windows to check for problems.

  Now the computer does not activate WINDOWS and gives me this message, please activate windows... I click top then says Windows can not be activated, please contact Microsoft Support.

  I have a question and problem and I really need to know how to operate. If I have to reset the computer and reinstall Windows (which hopefully livery) please let me know. At this point the computer is not activate windows and is a real problem

  I appreciate your response.

  Run a full scan with Malwarebytes and AdwCleaner , and then run file System check (SFC) Scan and repair the filesystem - Microsoft Community.

  Uninstall any antivirus bloatware, use built-in Defender.  Use the special tool to uninstall any inflated AV: uninstallers (removal tools) for common - antivirus ESET Knowledgebase software

  Tweaking registry cleaners and the suites (not counting as CCleaner) ruin Windows.

  I would try first to restore the system to a point where he was running better, or if it does not help then refresh or reset: How to refresh, reset, or restore your PC - Windows help

  As a last resort, you can follow this excellent tutorial to make an own 8.1 Windows Installer which puts the quality of installation in your own hands you and keep.  Just stay away from Tweaking suites, stick with integrated antivirus, Defender, keep everything off Startup tab in Manager tasks, watch your freeware installs like a Hawk of snitches, periodically scan with Malwarebytes and AdwCleaner

• My product key does not activate the product

  My product key does not activate the product

  No, it wouldn't.

  Please tell us

  * What is the exact name of the product you have purchased?

  * What is the version that you purchased (for example 10, XI, DC, 11...)?

  * is this a student version?

  * don't, he says "redemption code", "product code", "serial number" or something else.

  In any case, let us know your code, thank you!

• HP ENVY Sleekbook 6-1126sa - Mute LED does not

  Name of the product and operating system

  • HP ENVY Sleekbook has 6-1126
  • Windows 8.1

  Description of the problem

  • LED MUTE does not work/display
  • Nothing has changed I'm aware

  Hello

  Try the following.

  Download IDT Audio Installer on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp58501-59000/sp58502.exe

  One time finished, open windows control panel, open Device Manager and open sound, video and game controllers.  Right click on the IDT device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

  When you are finished, close the laptop by holding down the SHIFT key when you click Shutdown to stop temporarily a boot hybrid.

  Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu.  Press f5 to load the default values (sometimes it's f9, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

  Allow Windows to fully - charge it will automatically load an audio driver, but let just this complete.  Then open your download folder, right-click on the IDT Installer and select "Run as Administrator" to launch the installation.  When this has completed, restart the laptop.

  Kind regards

  DP - K

• TouchSmart HP Envy 15-J104sa memory card reader does not

  I took delivery of a HP Touchsmart from Envy 15 - J104sa, running Windows 8.1 this week and the internal memory card reader does not work. It does not recognize SD cards (I tried more than one) and continues as if nothing has been inserted; Don't display an error message. The cards work on my previous HP laptop. The only way to get the laptop to show an inserted SD card is to run the driver software update (http://ftp.hp.com/pub/softpaq/sp63001-63500/sp63415.exe) whenever an SD card is inserted; This must be done with the card in the reader. If the software is running and then the card nothing happens. If the card is ejected and then re-inserted (or a new card inserted) it is not recognized and the process must be restarted and the driver reinstalled even though nothing has changed.

  Can someone please help me with this question or I'll have to go back to the HP laptop. I do a lot of photography so being able to read fast and reliable SD card is extremely important for me; It is not a problem, I was expecting a new laptop all right out of the box.

  Thanks to you all.

  Unfortunately not, updates of driver solves the problem, but an update of the BIOS through the HP helper application seems to have resolved the issue. While I appreciate there were not specific drivers available in my opinion, it is difficult to accept that HP should be able to release a model where they know the equipment are not fully supported by the operating system and in this case does not work.

• Envy 15 t-j100 card reader does not

  I have a HP ENVY 15 t-j100 Quad Edition running Windows 7. His card reader does not work. When I insert an SD card, I get a message that the device is not installed correctly. Windows prompts you to update me the driver, so I let him, but he can't find the driver. In devices with SD card inserted, Manager it shows a symbol in the "Other devices" section "hard drive"with a yellow "!"  The State of the device reads:

  "The drivers for this device are not installed. (Code 28)

  To find a driver for this device, click Update driver. »

  I tried to update the driver from there, but still no driver is reported to be found.

  Furthermore, Device Manager indicates that the Realtek PCIE card reader works properly. I updated the driver using sp66065.exe, but there is no difference. The card reader is still not read, nor is it a drive letter appear to the inserted card.

  If I disable the Realtek PCIE card reader, then the "other devices" "Hard drive" in the Device Manager goes. But the card reader does not work as long. If I activate the card reader, the same error comes back with a yellow '! ' under 'other devices' "Hard drive" in the Device Manager.

  Could you please tell me how to resolve this situation? Thank you in advance!

  jacksan1

  You are the very welcome!

  Oh... It's big, happy that the problem was solved after recovery

  It would very probably be updates of Windows.

  Try to create a system restore manually each time before performing any installation of update or something important. You can restore to a previous restore points you have created, if a problem occurs after an update.
  http://www.SevenForums.com/tutorials/697-system-restore-point-create.html

  You can also create a shortcut to a button in your office so that you can easily create manual restore - Option 1 point in the following tutorial:
  http://www.SevenForums.com/tutorials/494-system-restore-point-shortcut.html

  System Restore: http://www.sevenforums.com/tutorials/700-system-restore.html

  I would also change the Windows Manual Automatic Update settings.
  This must be done in the HP support assistant program too - its control panel.

  I hope this helps.

  Have a good weekend
  God bless you.

  Concerning

  Visruth

• ENVY 15 3040 nr recovery disc does not

  Hello

  I made a recovery disk set as soon as I bought my ENVY 15. I accidentally deleted all partitions, then tried to recover by using the disks that I did... but I get this error by...

  The system recovery media does not support this computer.

  You are not able to restore the system with the media.

  0110 A9P60UA #ABA - A9P58UA #ABA

  Help, please!

  Hello

  Assuming that it's just a problem with the recovery media, here's another solution, you can try.

  Before you try the following, make sure that you can always read the character product activation key 25 on your label Windows COA (5 blocks of 5 alphanumeric games).

  An example of a COA label can be seen here.

  You can create an installation disk yourself using another PC - just download the good Disk Image ( this must be the version exact same origin supplied with your laptop ) from the link below and use an app like ImgBurn to burn the ISO correctly on a blank DVD - a guide on the use of ImgBurn to write that an ISO on a disc is here.  These Images are clean and a well respected source, however there are only limited versions available.

  Windows 7 sp1-iso-official-32-bit-and-64-bit

  Use the disk to perform the installation, enter the activation key of Windows on the label of the COA at the request and once the installation is complete, use ' 'phone Method' described in detail in the link below to activate the operating system -this made method supported by Microsoft and is popular with people who want to just have a new installation of Windows 7 without additional software load normally comes with OEM installations.

  http://www.kodyaz.com/articles/how-to-activate-Windows-7-by-phone.aspx

  All pilots additional and the software, you may need can be found here.

  Kind regards

  DP - K

• Envy 17 F7T68EA #ABU: Trackpad sometimes does not

  My trackpad sometimes will activate not a link, or frequently emphasizes not the scroll bar and it will not move when I click in the empty part of it. He also sometimes does not respond when I try to move the pointer.

  This occurred regularly since I bought the laptop.

  Synaptics Pointing Device Driver - Synaptics Incorporated - 17.0.8.0: no update available.

  Can anyone help?

  Hi @NineToTheSky ,

  Thank you for visiting the Forums HP's Support and welcome. I looked in your question on your HP ENVY 17-j130ea Notebook and Touchpad issues. Here is a link to troubleshoot the Touchpad. If you go to the section setting of TouchPad and ClickPad pointing sensitivities that should help solve the problem.

  Please let me know how it goes.

  Thank you.

• HP Envy 15 t-q400 CTO: tune does not

  My computer is brand new from May. The HP Support Assistant program ceased to connect to HP to conduct audits of update. It gets stuck on downloading messages and updates definitions and does not complete the action.

  I already tried to uninstall and reinstall the program from the HP customer care link, but it still does not work.

  Please advise the best way to get this tool works again.

  Thank you in advance for any help you can provide.

  Imm_526

  Hello;
  
  Let me welcome you on the HP forums!
  
  I read your post about the problems with your new HP PC and wanted to help.
  
  You should not have problems with a PC this new.
  
  While this PC is still under warranty, contact HP customer care directly so that they can put you in contact with HP Technical Support to see what they can do on the diagnosis and repair of your machine remotely.
  
  I did recently, and HP technology was able to remotely access my PC on the Internet and to make the necessary repairs.

  If you live in the United States or the Canada, details are on this page: http://www8.hp.com/us/en/contact-hp/phone-assist.html#section1
  
  If you live elsewhere, contact details are on this page: http://www8.hp.com/us/en/contact-hp/ww-contact-us.html
  
  NOTE: once you get through, stay on the line until you are finally able to talk to someone ' one - it can take a while!

  Good luck