HP Envy 2013 all-in-one: where is the wireless button while a HP ENVY

I can't understand how my wireless is off on the HP Envy all in one. Tried f10, F9, f10... F12 and they change nothing. I don't see any blue or amber light on the keyboard. Any help would be appreciated.

It ended up working for me:

Turn off the power to the adapter:
1. open Device Manager. (Win Key + R > type devmgmt.msc > OK)
2. expand the network adapters.
3. right click on the Ethernet adapter / wireless, and then click Properties.
4. click on the power management tab.
5 remove the check mark next to allow the computer to turn off this device to save power.
6. click on OK.
7 test cycle.

Thank you!

Tags: Notebooks

Similar Questions

  • Pavilion dv7 - 2173cl what and where is "the wireless button? the light is normally blue, red for access.

    After two years, I get the message that my wireless card is "off" and I need to press the 'Wireless' to turn on. Program assistant wireless allows me to see option to turn on, but it is not clickable.

    Status light is now red, normally blue. Wireless networks do not even appear on the options for the connection, dial only.

    All the documents I can find just said before or side, but don't see anything there.

    TY

    Hello

    If the red status for the wireless adapter light is on a luminous dial just below the screen, try to type the red light and see if it turns blue.

    Kind regards

    DP - K

  • all-in-one 7510 loses the wireless connection

    We just bought a HP Photosmart 7510. She created fine with a wireless connection to our office for Vista 64-bit. After awhile, he loses the wireless connection. If I close the printer then turn on again, it resets the connection and works very well. I read that it can lose connection if it goes into sleep mode, and it seems that is what is happening. My question is, is there a way to keep the impression of loss of connection or enter the mode 'sleep'? Or do we have to put the printer only whenever we wanted to print, copy or scan? If so, the printer is adjustable to disable instead of switch mode 'sleep'?

    Already set to 'off '. I found this thread http://h30434.www3.hp.com/t5/Printer-Networking-and-Wireless/7510-photosmart-printer-energy-mode/m-p/1230681/highlight/true#M33814 I tried this and so far it works and has not lost its connection.

  • HP Officejet J4580 all-in-One: where the printer cartridges are located

    Where are the cartridges of printers that are located on the HP Oficejet J4580 all-in-One printer

    The ink cartridges are located inside the printer. Go here... http://support.HP.com/us-en/product/HP-OfficeJet-J4000-all-in-one-printer-series/3645081/model/3645099/manuals download the User Guide and read page 10 for see where.

  • How can I keep my HP1510 all-in-one to print the test pages as much?

    How can I keep my HP1510 all-in-one to print the test pages as much? My printer is connected to my laptop, and it seems that whenever I disconnect, want the printer print a test page when I reboot. I don't know where the option is to disable this option.

    Pages are likely alignment pages.  When a new cartrdige is installed the printer will print an alignment page which should be placed on the scanner glass and press the button of scan to complete the alignment process.  If the alignment is not complete it will repeat when the printer is powered suite or maybe at the end of print jobs.

    The alignment page will stop printing when the alignment process is complete.  See the page here for more information.

  • I have a HP officejet J6480 all-in-one printer. The screen is white and yellow light flashing

    I have a HP officejet J6480 all-in-one printer. The screen is blank and there is this little yellow light flashes on the Cancel button.  I can not print or fax anything because the screen is empty. Since the light started to Flash the entire printer has not worked. Can someone please HELP! : womansad:

    Well, if you haven't tried this and then create a coercive power reset:

    Do not activate the wide (although you can), remove the power cord at the back of the printer. Wait at least 30 seconds, then reconnect the power cord to the printer. Turn on the printer. If that clears up the flashing light/white screen, then try printing etc...

    If this is not the case, see if something visible is originally the error state such as paper jam, odd items in the printer, nothing fancy. Also try to plug the printer directly into the wall outlet as opposed to a look/power surge Strip, or even try a Jack in another room if it is not successful.

  • Do I have to pay to download the driver for my printer Dell 966 all in one I lost the driver CD?

    Original title: Dell Printer 966 all in one

    Do I have to pay to download the driver for my printer Dell 966 all in one I lost the driver CD?

    Sam Soliman
    E-mail address is removed from the privacy *.

    You shouldn't if you get it from Dell.

  • How one properly installed more than one printer all-in-one (different) on the same pcr?

    Once installed 1 All in one printer, how one installs another printer all-in-one (different model) on the same computer without altering the first installation because all software are the same for each all-in-one printer, with the exception of different drivers linked to each different model all-in-one printer?

    Hello Boothkp,

    From what I can understand in your post, you are looking for a solution install several all in printers on one system, without causing problems during the first installation. This can be easy.

    Lets say you have 2 printer that both use the version 14 of the HP Solution Center software. Then, you install the first complete printer with all the software you want to use. The second installation, you just select the option 'Add printer' or 'Add features', this will add then the second printer in the current center solution without a conflict.

    In case this does not work, then please give more information on the model and the operating system you are working on.

    Kind regards

    Van Baardewijk

  • OfficeJet Pro 8500 All in one – disappear from the HP Solution Center guard

    Background:

    I have two HP all-in-one devices, at the office of one while a 8500 A909a and at home and Officejet 7310 all in one.

    My Dell laptop running Windows 7 Professional 32 Bit.

    I had the laptops and printers for several years, the two were connected through connectiosn fine wired via routers with printing/scanning also up and running by the HP Solution Center.

    If I work in the office and he wanted to scan a document I woul open Solution Center and left two printers would come to the top. I could click on the installed 8500 in the office and it worked fine. Even if I was at home I opened Solution Center, click the 7310 and could very well sweep.

    Problem:

    In recent weeks the 8500 keeps disappearing from the HP Solution Center. He still appears in Control Panel and other applictaiosn of windows like Word and I can print again, BUT not is more visible in the solution Center.

    I load the installation of the driver software (recently downloaded from the website of HP, file name OJP8500vA909_Full_14 (1)) and charging/install the 8500. It takes about 20 minutes to make. The 8500 appears then, but with a suffix like Officejet 8500 (7) after him in the solution Center.

    I can scan then very well but the next day when I start and get to the center of the Solution, it has disappeared again. It's infuriating and wastes a lot of time.

    Please tell us what can I do to load the correct software once and for all for allowing me to use two printers without them disappearing from the solution Center.

    Thanks in advance.

    Hi HPhep42,

    Follow the steps below and let me know what happens?

    First step: clear temp directory

    1. Type %temp% term or search programs and files of field
    2. Select all the files in this folder, and then press the delete key to remove. If you receive a message that the file is in use, you will need to ignore this file (s).
    3. Proceed to step 2 below

    Second step: downloaded and extracted to your system:

    1 download the drivers and full software features

    Driver and complete software of HP Officejet Pro features

    2. once the download is complete, double-click the file to extract the software.

    3. when the installation window opens, press the Cancel button to stop the installation

    4. tap folder in the race or search programs and files of field

    5. Locate and open the folder starting with 7z (example: 7zS2356)

    6. right click on the folder and select copy

    7. close this window and all open windows, and then in the Middle the desktop right click your mouse and select Paste. This will move the 7z folder on your desktop.

    8 open the 7z, that you just copied on your desktop

    9 open the Util folder

    10 open the CCC folder

    11 start the uninstall_L4

    12. once the uninstall is complete, restart the computer

    13. run disk cleanup from the tools Accessories\ system under all programs folder

    14. download and install the latest version of Adobe flash player

    Update Adobe Flash Player

    15 open the 7z folder and then double-click the Setup.exe file that will be towards the bottom of the open window. Follow the instructions on the screen to reinstall your printer.

    Let me know if you are able to successfully install the software and driver and are able to print & scan?

  • -What is the HP Officejet 7310 all in one able to print wireless

    -What is the HP Officejet 7310 all in one able to print wireless

    What operating system?  If Windows and with the printer connected to the router via Ethernet, download and run this utility: http://h20180.www2.hp.com/apps/Nav?h_pagetype=s-926&h_lang=en&h_client=s-h-e17-1&h_keyword=dg-NDU&jumpid=ex_r4155/en/hho/ipg/forum/network_diag/

    What did he say?

  • Where is the "Logout" button to emails from Thunderbird?

    Where is the "Logout" button to emails from Thunderbird? It is impossible to "disconnect" as it is with all other emails that I used.
    Thank you

    You do not connect you. You don't sign in then why would disconnect you? You press the red x in the corner and close the program.

  • where is the Refresh"" button.

    Please let me know where is the Refresh"" button.

    It is to the right of the address bar. See the screenshot

  • I have to try to download winhlp32.exe, and anything else that a tour receive everything. where is the download button for vista 32.

    Help with download winhlp32.exe, tried to get valitated, and which are then thrown into a bunch of adds.  where is the download button for the 32-bit vista?

    Hello

    • In did you get actually the Genuine Windows Validation?

    Get a bunch of advertising could indicate that the broser is hijacked.

    See: http://www.microsoft.com/security/pc-security/browser-hijacking.aspx

  • where is the Start button

    where is the Start button

  • Where (or which) in HP can I found what all-in-one models support HP wireless live?

    I bought a HP8600 N911a all-in-one and found to my great regret that it does not support the HP wireless Direct.  I printed the network configuration page, and it doesn't have a Direct wireless HP section.

    I'm looking on the site HP and N911a, N911g and N911n say all these machines ePrint, AirPrint and printing from mobile devices, but nowhere do I see isn't the State which printers actually supported HP wireless Direct.

    Where can this inside info on printers is therefore of a civilization disappeared, so customers can make an informed buying decision and should not be required to return these machines to retailers unhappy?

    Thanks a bunch!  It was the perfect solution - the active firmware HP Direct wireless update, so I didn't have to return the printer and buy another.  Which I'm sure is appreciated by the retailer and HP too.

Maybe you are looking for