HP Envy 23 - K030: Audio problems with HP envy 23-K030 and Windows 8.1

I read all the discussions on audio problems with the IDT High Definition Audio Driver and Windows 8.1
I get audio on my speakers ONLY and not the headset.
I uninstalled rebooted and reinstalled the correct driver by this web site of HP support for my machine.
no luck - same behavior.

The only thing that worked was the IDT driver installation and Windows device driver high definition.
The headphone jack are properly behaved and everything is ok worked.  However, I lose the audio Panel BEATS and the functions of the Board of Directors of IDT.   (superior quality sound-even with the built-in speakers).

An interesting thing I noticed, when the Microsoft driver is used (and work) on the control panel for this device, it presents "the left panel making" when the configuration screen for the 'speakers '.  for the official driver of IDT, it shows 4 outlets - none of them say "left sidebar", there's rear panel and a plug of façade.    On the old driver that didn't work, he showed "right pane" and there is no control on the right panel.

I think the pilot is simply wrong of this material. The driver is to look 10/2013-it is as if it were updated for this model ALL in ONE - only when it comes to use the headphone jack.

Is there a better driver (I can't "find one beyond 6.10.6486.0 or 6.10.6491 - both had the same problem.)

I do not use my time to often-rarely-last helmet I used them they have worked. Now, they are not - a few automatic updates upset the balance of the force.

Any help would be appreciated. IF not - it is a problem that a person should study.

Also it is reproducible. I have install generic Microsoft driver-headphone jack works and the sound Jack not pregnant, I re - install IDT player - his fate only speakers and not jack.

I thought about it.

BIOS V 80.09 (on this wonderful site to Support HP) - does all the work

V80.05 - did not work properly with this Version of Bios.

Thank you HP very useful site if you take the time to browse through all the updates.

Tags: HP Desktops

Similar Questions

  • Downloaded and paid of Minecraft and having problems with Java, Anti Virus Scan and Windows Update - error code 800F081F

    Downloaded and paid of Minecraft and having problems with Java, Anti Virus Scan and Windows Update - error code 800F081F

    Would you advice, thank you.

    Hi Hugo,.

    1. what anti-virus software you have installed in the computer?

    2. What is the full error message/code?

    3. the issue occurred after you install Minecraft?

    4. are you able to play Minecraft without any problem?

    5. what happens with Antivirus and Java?

    Windows Update can occur if one or more of the following conditions are met:

    1. the Windows Update database is damaged.

    2. antivirus software is configured to scan the %Windir%\SoftwareDistribution folder.

    3. the service (BITS) Background Intelligent Transfer Service does not receive a content link header.

    4. a required system file is incorrectly registered.

    5. Windows Installer has encountered an error.

    6. the manifesto of component maintenance (EC) is damaged.

    7. the Windows Update service has stopped during the installation.

    8. a version of the file conflict exists with Windows Update agent files.

    Please follow the steps described in the methods to solve the problem:

    Method 1: We will try the steps from the following link and check the result:

    Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article:http://windows.microsoft.com/en-US/windows7/Back-up-the-registry

    How to reset the Windows Update components?

    http://support.Microsoft.com/kb/971058?WA=wsignin1.0

    Method 2:

    To correct the errors that occur when you use Windows Update, install, and run the system update readiness tool. The tool analyzes inconsistencies on your computer and fixes as its current installation.

    You can view the following link to download the system update readiness tool and check:

    System tool update that corrects problems of Windows Update is available for Windows 8, Windows 7, Windows Vista, Windows Server 2008 R2 and Windows Server 2008

    http://support.Microsoft.com/kb/947821

    Details of the event log to find what caused the Antivirus and Java to fail:

    What are the information contained in the logs of the event (Event Viewer)?

    http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

    Hope that the information provided is useful.

    For any help related to this problem or any question of Windows, you can still display in the Microsoft Community Forum!

  • Audio problems with Thinkpad z60t 2511 after installation Windows 7

    I'd appreciate any help in solving, why I can not get sound/audio after installing Win7 on this Z60t.

    After a clean install of Win 7 on a hard drive put on level, I downloaded and installed all the drivers/software from Lenovo web site that was listed for win 7 but can't get sound to work.

    Display messages mean no installed speakers.  But the speaker in the keyboard buttons provide Visual bars when raise / lower sound or turn off sound.

    Is this a defect of Lenovo does not support win7?

    Thanks for any help

    Pete

    I had exactly the same problem and fixed it and get my sound buttons (if the works display part)

    (1) download the installation of XP SP3 driver file

    77a224ww.exe of the site

    (2) run the program will run and upack all the device drivers and the installation file

    3) click and run< device manager="">

    4) click on the sound and video controllers

    (5) run the update device driver and use the choice that allows you to specify where to look and that it points to the directory/drivers/win/audio of the/smaxwdm/w2kxp where are located the soundmax drivers and load

    Works great!

  • Problem with the HP Pavilion Bluetooth and Windows 8.1

    I have a new HP Pavilion (approximately 6 weeks) 15-n205AX running windows 8.1.  Can I connect my android phone with it, but when I try to send a picture from phone to the laptop it says failed to connect.  (But I can do okay on my old laptop so doubt the problem is the phone).  I removed the device and re-paired several times, apparently successfully, but still cannot send pictures.

    Any thoughts?

    Hi NellyG. I understand that your Bluetooth will pair, but fails to connect when you try to send a photo. Read this for tips or tricks for using Bluetooth: Bluetooth (Windows 8) devices use.

    Let me now if this is useful.

  • Driver problem with prolific USB-to-Serial and Windows 7 connector

    I'm trying to connect a UPS to PowerPanel to my new ACER computer with 64-bit Windows 7 via a prolific USB-serial connector software. The convenience store says he has a driver problem the convenience store is unable to correct. However, messages also said that my driver is up to date and the device working properly. I have installed, uninstalled and tried to fix several different drivers, run the troubleshooter, etc.. I tried to run the stand-alone Windows Installer, but it says "not compatible with your computer." Help! Is there anything else I can try?

    Hi Mary,

    Until solve us the problem we need more information on the issue.

    ·        What is the exact error message that you receive when you connect theprolific USB-serial connector to your computer?

    ·         Could you plug the connector on the computer as soon as possible without any problem?

    ·         What is the model number of the connector?

    ·         The ups and the computer manufacturer and what is the model number?

    ·         Who is the stand-alone Windows Installer you tried to install?

     

     

    You can first check if the USB connector to prolific series model if its compatible with windows 7 Access the link below to check the compatibility with Windows 7.

    http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

    You can also contact themanufacturer prolific USB-serial connector and check if the device is compatible with Windows 7 and if you need to install any other drivers to get the device to work.

     

     

    Post back with the required information.

    Thank you and best regards,

    Srinivas R

    Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Still problems with Age of Empires III and Windows 7 compatibility

    If some how I got 3 AoE is installed on my computer yesterday and was able to play, but today I'm trying to play again and it keeps popping up the window saying that there is a compatibility issue. Can someone tell me how to solve this problem, or tell Ensemble Studios to make a patch to correct this _?

    Make sure your drivers are updated... and tell the program to run in compatibility mode.

    http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-compatibility-mode/

    MCP. MCDST. LVL 80

  • Problem with HP DC7800 Convertible Midtower and Windows 8 Pro...

    I installed WIndows 8 Pro on my HP DC7800 Convertible Midtower and I get the following message:

    "Intel Management Engine Interface is not compatible with Windows 8."

    Question: How can I fix and can I use WIndows 8 Pro on this PC?

    Jeff

    Thanks for your help.

    Jeff...

  • Are there problems with OS 10.11.4 and opening?

    Are there problems with OS 10.11.4 and opening?

    Upside down images in the mode list. There is no hope of any problem opening fixing. There will be no further development.

  • Problems with different e-mail addresses and the different Apple ID

    Hi, I have some problems with the different Apple ID and e-mail addresses connected to them, and I hope someone can help me in what to do.

    First a primer on my Apple ID

    ***@me.com - it's my account General iCloud (backup, iMessage, Facetime etc.).

    ***@losmail.no - my iTunes/App account (purchase and download music, app, etc..)

    ***@me.com: I have no problem connecting to this account (appleid.apple.com, iCloud.com etc etc..)

    ***@losmail.no: I have no problem connecting to this account in iTunes/App Store. However, I can not connect on appleid.apple.com with this account because he asked me to check the email address. However, this e-mail address use a messaging service that doesn't work anymore, so I can't check it out. Because it is a private messaging service, I want to change the Apple ID on my account @gmail.com.

    I believe, however, that the account @gmail.com has been connected to the account @losmail.no because I received my shopping etc. of my account @losmail.no sent to ***@gmail.com. These recipes also "Apple ID: * @gmail.com. When I connect to the account, however, use ***@losmail.no. However, an I said, I want to log on by using ***@gmail.com.

    What is strange is that in iTunes / App Store, I can connect with ***@gmail.com. However, this is not the same account as ***@losmail.noand previous purchases / comments etc. are not available. It's strange because said revenues (Ref. above).

    An other ting that indicates that the Apple ID where I use ***@losmail.no once was connected to ***@gmail.com, is what happens when I try to log in to ***@gmail.com to appleid.apple.com. Then, I get a message saying that the e-mail address must be verified. I can write the code sent to the ***@gmaiI.com, but it is said then that this e-mail address is already is used by another Apple ID, so it cannot be verified.

    So I guess my question is, basically, how I can change the ID of the ***@losmail.no to ***@gmail.com Apple when I can't access the account losmail, but the appleid.apple.com tells me that I need to check this email address.

    Best regards

    Philippe

    Hi phillla,

    Thanks for all the details with your accounts.

    Can be difficult to have more than one Apple with several e-mails all mixed together.  If an email is used with another Apple ID, for example, that e-mail can be used to create a new Apple ID or rename an old.

    The analysis of what you seem to have however...

    Your purchases are with your *@losmail.no Apple ID, but the emails for this go to your *@gmail.com email address.

    *@gmail.com is the primary e-mail address for your Apple ID *@losmail.no.

    You can connect to iTunes or manage your page ID with *@gmail.com Apple says it's an Apple ID on its own.  As an email address can only be verified for an Apple ID, which means that he must check with your *@losmail.no Apple ID and cannot be verified with *@gmail.com.

    You say you can not connect on appleid.apple.com with *@losmail.no you will need to check the email address.  You have a relief attached to this ID e-mail? This is the email that would be used to recover.   You receive your check or reset email - Apple Support

    Bottom line, you want to change your primary Apple ID but outdated to *@losmail.no to *@gmail.com, you must first rename *@gmail.com to something else and delete this email of all codes from Apple as well.  Then follow the link above to get access to *@losmail.no and control so that you can rename it.

    Best regards.

  • Error message indicating the problem with the monitor of devices in Windows XP.

    Original title: Device Monitor

    Error message indicating the problem with the monitor of devices in windows xp. How to fix?

    Hello

    1. when exactly you receive this error message?

    2. What is the brand and model of your computer?

    3. What is the exact error message that you receive?

    Please provide us with more information about the issue so that we can provide you with the necessary assistance.

  • Error - there is a problem with the external Setup program and it must be closed when you try to install windows updates

    Original title: How can I fix external MSI?

    When I try to download the updates, the error message says there is a problem with the external Setup program and it must be closed.  Updates will not be installed.  Anyone know how to solve this problem...?

    Hi John,.

    ·         You are able to install other applications on the computer?

    It seems to be a problem with the corruption of the .net framework. I suggest trying to repair the .net framework on the computer and see if you can install the updates.

    http://support.Microsoft.com/kb/923100

    Hope the helps of information.

  • Problems with UAC, Sims 3 downloader and original windows

    Problems with UAC, Sims 3 downloader and original windows

    I have windows Vista and have been using it for a while to play the sims 3 and download games via original EA downloader/store.  I had run a windows update and an original updated in the last days and therefore my sims 3 expansion packs ceased to operate.  I uninstalled all and have reinstalled the original game of the downloader of origin and now when I try to download my expansion packs I get an error message saying that windows has prevented the application creates a download directory, please accept the UAC prompt to start to download this game.  I approved the promt and they have same message came still high and so I disabled UAC altogether and still got the same error message, I looked on the EA forums and the only line I can find of them our it may be a windows problem (which I doubt)?  Can you help me?

    Hello

    Method 1:
    Right click on all of the files and select run as administrator and try to install it.

    Method 2:

    You can try creating a new user account.
    http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

    Note: select the Administration option while creating a user account

    Method 3:

    You try to run the system restore at the same time that it worked very well.
    http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

    I hope this helps. Get back to us with results

  • problem with write access to truecrypt readers windows 7. The mounted drive is not writing priveliges. Read-only. Cannot change in the security permissions.

    problem with write access to truecrypt readers windows 7. The mounted drive is not writing priveliges. Read-only. Cannot change in the security permissions.

    Hi amcop4591,

    1. How is - that Mount you the drive on the computer?

    2 Di you use any third-party tool to mount the drive?

    I suggest that you remove the external drive using the disk management and check back later if you can change the permissions on the drive.

    If you change the permissions, make changes to the permissions on the drive and then mount the drive.

    Mount or dismount a drive

    http://Windows.Microsoft.com/en-us/Windows7/mount-or-dismount-a-drive

    I hope this helps!

    Halima S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • I have a problem with the Narrator, repeating words and phrases.

    original title: NARRATOR in WIN7 SUPPORT

    I use windows7.  The annoying Narrator sometimes voices repeat words and phrases.  I also need help, change of voice and using Narrator to read aloud my text book I downloaded.  It is in PDF format.

    Original title: Narrator sometimes repeat words and phrases

    Hello

    Thanks for posting your query in the Microsoft Community.

    You have a problem with the Narrator, repeat words and phrases. It can be difficult when something that is important to you does not work as expected. It's pretty simple and we're here to help you solve the problem. We work as a team and get this sorted out.

    Please answer these questions-

    (1) exactly where you run the Narrator?

    (2) the Narrator extends from a particular document?

    (3) have you made changes on the computer before the show?

    I would like more information about the issue.

    Method-

    I wish that return you the items for assistance-

    Narrator doesn't read what I expect him

    http://Windows.Microsoft.com/en-us/Windows7/Narrator-doesn

    Hear text read aloud with Narrator

    http://Windows.Microsoft.com/en-us/Windows7/hear-text-read-aloud-with-Narrator

    Let us know if you need assistance regarding the issue. We will be happy to help you. We at Microsoft, strive for excellence and provide our customers with the best support.

    Thank you.

  • Problem with update of Photoshop, Illustrator and Indesign CS6

    Hi all. I have problem with update of Photoshop, Illustrator and Indesign on OSx 10.8.4 CS6. Application are OK but update (bug fixies) does not work. Update failed. (U44M1P7)Screen Shot 2013-07-30 at 16.11.09.png

    Hi El Gondo,

    The following could explain and help solve the problem...

    U44M1P7 - updates:

    http://helpx.Adobe.com/Creative-Suite/KB/error-u44m1p7-installing-upda tes-HYPERLINK

    U44M1P7, U44M2P7 - CC help / cannot apply the extensions 6.0.2 update manager | Mac OS:

    http://helpx.Adobe.com/Creative-Suite/KB/unable-apply-extension-manage r - update.html

    Thank you!

    Ankit

Maybe you are looking for