HP ENVY 27-p050na All-In-Onw: USB receiver preinstalled for keyboard/mouse wireless

Similar Questions

• WANT TS 23-k300xt RE: USB receiver preinstalled for keyboard/mouse wireless

  The new all-in-one arrived yesterday.  In the excitement, I did not notice something VERY important.  The USB receiver for the keyboard and the mouse was not in sight.  My intention was to use my old MS7000 ergonomic wireless devices, as I have arthritis very bad in my hands and the ergonomic keyboard is extremely useful.  YES, I'm a QWERTY typing with both hands!

  Even if I can't use the MS7000, I need the keyboard and I use the MS ones since their introduction.  I'd rather stick to what I know.

  After an hour conversation with HP customer service this AM, I'm totally frustrated.  Basically, I was told that USB cannot be turned off, and I'm stuck with the keyboard and mouse HP.   It is the MATERIAL.  Why can't it be disabled or deleted? (If it was broken?) WHY do I have it preinstalled?  Horrible design!

  I hope that I was just uninformed!  Help, please.

  You have been misinformed if your laptop was delvered with a wireless HP Clavier\souris combo.

  There is a usb wifi dongle receiver in the bottom of the display if your office is deilvered with a mouse\keyboard usb combo. You can remove it to disable. You can also use the control panel to turn off the device to use.

  See the video at the following ADDRESS. Click usb dongle to view the procedure to remove the dongle.

  http://h20574.www2.HP.com/results.htm?SID=7161714&MEID=12B63162-517B-490E-8897-FA6BBE09472E

  You can buy a wireless Microsoft or Logitech ergonomic keyboard to replace the one provided with your AIO desktop computer.

  https://www.Google.nl/search?q=Microsoft+Wireless+ergonomic+keyboard+and+mouse&OQ=Microsoft+Wireless+ergonomic+keyboard+&AQS=chrome.2.69i57j0l5.14320j0j4&SourceID=chrome&es_sm=0&IE=UTF-8

  It will ship with a usb or bluetooth dongle.

• Where can I get a transmitter replacement of conection usb for keyboard Microsoft Wireless Comfort 1. 0 has (1027)

  Where can I get a transmitter replacement of conection usb for keyboard Microsoft Wireless Comfort 1. 0 has (1027)

  Skype id: andrewgranville

  E-mail address is removed from the privacy *.

  Hi André,.

  Good to know that you were able to resolve the issue and thank you for sharing information.

• With the help of transmitter USB for keyboard and wireless mouse 3000 in Vista

  a friend already has the Wireless Mobile Mouse 3000

  and just purchased the Wireless Keyboard 3000 .

  They both work w / USB 2.4 GHz transceivers, and they do not work OK using both of the receivers that accompanies the individual purchases.

  I was wondering if it is possible to use a single USB transceiver for both devices instead of two... hoped that this would be the case because they are the two series "3000" operating in the same band.

  Some hoped it would all just automatically connect, but no luck.  I can force it to use a two-way radio?

  Thanks for any help / suggestions

  * original title - use Transceiver even for (2.4 GHz) wireless KB & mouse that were purchased separately? *

  Hi moonstruck67,

  We cannot have the same transmitter/receiver for two wireless devices because it is not supported.

  You need to do the same with wireless Bluetooth technology.

  However, if you want to force the installation, try the following steps:

  i. Click Start

  II. Type in devices and printers

  III. right-click on the transmitter/receiver

  IV. If you have the opportunity to connect or sweeping, try the option and check if that helps.

  Link, please refer to:http://www.microsoft.com/hardware/mouseandkeyboard/features/bluetooth.mspx

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• How to fix problem with Windows vista to fail to load while a dual receiver wireless (for keyboard & mouse) is to plug it into any USB port?

  Turning on the PC with a wireless receiver (Microsoft model 1119) plugged to any USB port causes Windows Vista does not load.  Turn off the PC, unplug the receiver, put the machine, loads without problem.  Once windows is loaded, reconnect the receiver wireless Microsoft and less than a minute, the keyboard and the Microsoft wireless mouse works perfectly.  Device Manager does not take into account conflict of devices.

  Hello

  Thank you for keeping us posted.

  Check if the hard disk has been set as the first boot device in the boot coastal in Input/Ouput order Basic (BIOS). Otherwise, you can set the hard drive as the first boot device and check.

  Consult the manual of the manufacturer, to do the same thing.

  Note: BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from configuration can resolved BIOS/CMOS settings. Changes to settings are at your own risk.

  Hope this information helps.

• All my USB ports are disabled; keyboard and mouse do not work, can not navigate to reactivate their?

  After installing Java rebooted my system update, while booting it showed Eroor message 'BootMGR' missing, disabled bymistake USB ports, now my keyboard & mouse not working does not help?

  Hi Abhi SR,

  ·        How do you disabled the USB ports?

  ·        What you did to fix the "BootMGR" error missing?

  If you have disabled the USB ports in the BIOS (Basic Input Output System), you will need to use a PS2 Keyboard and enter the BIOS for their re help.

  Note: Changing the BIOS / chipset can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/chipset can be solved. Changes to settings are at your own risk.

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• USB drive to block via group policy but keyboard, mouse, printers and USB Datacard work

  USB drive to block via group policy but keyboard, mouse, printers and USB Datacard work

  USB drive to block via group policy but keyboard, mouse, printers and USB Datacard work

  How to activate a strategy disable Usb drive but the keyboard mouse printer and the usb datacard work machine Windows 7.

  Hello

  In order to get better assistance to the group policy setting to block the use of a material to a computer, you should post your query in group policy on TechNet forums. I provided the link below, please use it to more assistance with Group Policy:

  http://social.technet.Microsoft.com/forums/en-us/winserverGP/threads

  I can't create a new thread there matching your query will help you to better understand the implementation of group policy.

• HP ENVY 4500 E - ALL - IN - ONE: HP ENVY 4500 E - ALL - IN - ONE DOES NOT PRINT

  I can't print from my desktop PC with an ethernet connection, but I am able to print from my laptop with a Wi - Fi connection.

  The printer used to work on my desktop PC, then I upgraded to Windows 10, made the operating system was not entirely compatible with my PC, reformatted it with the help of remote support Microsoft, back to Windows 7, had a lot of problems with Windows Update and WIndows Installer and so also with the installation of the driver.

  I tried installing from the original installation CD HP Envy with no luck, uninstalled and reinstalled with the latest driver from the HP website with no luck and since (apparently) to solve the problem with Windows Update and WIndows Installer, uninstalled and reinstalled the driver software on the CD again with no luck.

  I tried all the suggestions on the forums, with my computer hang too for the first time in weeks at the recommendation of msconfig on your forum for disabling startup programs.

  The scanner works.

  Sometimes, in Word, I get a message error "Windows cannot print due to a problem with the current printer setup". Sometimes I have no message.

  (I use Service Pack 1)

  Hi HPAGJ,

  Thank you for coming back to us.

  Gemini02 is currently out of the office so I thought jump in and help.

  When you run the PSDR, have you selected the connection "network (192.168.2.107) is not installed? Being not fully installed is causing the problem.

  There is corruption on the computer, this can certainly occur after you upgrade your operating system. I suggest to try the following steps in the following order for best results.

  • Make sure that all of your Windows updates are up-to-date.
  • HP printers - uninstalling the software of the printer (Windows)
  • Use the File Checker system to repair missing or corrupted system files. It's always a good idea to back up your data before proceeding.
  • File system check (SFC) analysis and repair system files & DISM to fix things that are not SFC.

  Manually delete the print driver:

  This problem occurs if there is printer drivers are corrupt.
  I suggest that you remove all installed printers and reinstall Windows 7 printer drivers if available.
    
  Remove a printer
  1. click on the "Start" button, type PRINTERS in the start search box and press ENTER.
  2 find the printers installed icons, then delete them.
  3. right click on the blank part of the window and choose "Run as Administrator"-> "Server Properties".
  4. on the tab drivers, select them printers list and click Remove. Please, select Remove driver and driver package.
  5. open the start menu, enter APPWIZ. CPL in the search box and press ENTER to launch the "programs and features".
  6. try to remove all related printer software.
  If the problem is not resolved, I suggest that you clear the money printing system.

  Step 1
  ======
  Start Windows Explorer, and then rename all the files and folders in the following two folders:
  c:\windows\system32\spool\drivers\w32X86
  To rename a file, we can click with the right button on the file and select Rename.
   
  Step 2
  ======
  1. Click Start, type REGEDIT in the start search bar and then press ENTER.
  2. navigate to and then click the following registry key:
   
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Environment\Windows NT x 86
  View the list of subkeys. There should be only the following subkeys:
   
  Drivers
  Print processors
  If there are any keys other than those listed above, follow these steps:
  a. on the file menu, click Export.
  (b) in the file name box, type a descriptive name for this key--for example, type WindowsNTx86regkey - and then click Save to save it to your local office.
  We can use this backup of the HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Environment\Windows NT x 86 registry key to restore the key if you experience problems after you complete this procedure.
  c. delete all keys other than drivers and print processors.
   
  Step 3
  ======
  Find and click the HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Monitors registry key. View the list of subkeys. There should be only the following subkeys:
  BJ language monitor
  The local port
  Microsoft Document Imaging writer monitor
  Microsoft Shared Fax Monitor
  Standard TCP/IP port
  USB Monitor
  WSD port
  If there are any keys other than those listed above, follow these steps to remove them:
  a. on the file menu, click Export.
  (b) in the file name box, type a descriptive name for this key--for example, type Monitorsregkey - and then click Save to save it to your local office.
  We can use this backup of the HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Monitors registry key to restore the key if you experience problems after you complete this procedure.
  c. delete all keys other than the above 5.
   
  Step 4. Disconnect the printer from the computer and restart the computer.
   
  Step 5. Reconnect the cable from the printer to the computer, install the printer according to the manufacturer's installation instructions and then check if the problem persists.
   
  You can also use these two articles for this problem:
  http://support.Microsoft.com/kb/2000007
  http://support.Microsoft.com/kb/933454

  • Download HP ENVY 4500 e-all-in-One Printer series full feature software and drivers.

  If you are still having problems try:

  • HP print driver printer - install and use the built-in Windows

  If all else fails, I create a new administrator account and try to reinstall:

  • The difficulty of a user profile is corrupted.

  Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

• Help... downgrade to windows 7 on my HP Envy 23-c059 all-in-One is a disaster!

  Help please!

  After a major effort (and another $ 110 for the Windows 7 product key) I finally managed to downgrade from Windows 8 to 7 on my PC (HP Envy 23 - c059 all-in-one). I thought that I had finally made until I realized that nothing worked. Not only I need drivers for all components, but I now have no way to install on my machine. As well the free wireless and Ethernet seem to be inadmissible, so I tried to use a USB flash drive, but it seems to be out of use as well.

  I know that it is not suggested to do the downgrade in the first place, but I bought this machine for my kids to do their homework on, and since buying it almost 8 months ago, children just do not use it in frustration. I decided to take drastic measures, as I felt the $1 100 I have devoted to this subject has been wasted completely with it being unused.

  Please tell me that I have not created a weight heavy and very expensive.

  I thank in advance for any tips or advice, you can provide.

  Blair

  Your best option might be to order recovery media to get the machine to factory. You can order it in your list of drivers down HERE

  If you are to meet the challenge of installing the drivers Win 7, I'd start with Chipset AMD here. He should get usb ports work. Maybe you can download and burn to a cd to make it on the AIO.

  http://support.AMD.com/en-us/download/chipset?OS=Windows 7-64

• 8.1 Windows Pro update the problem (from Windows 8 Pro) on Envy 23 TouchSmart all-in-One...

  Hello

  I have a HP Envy 23 Touchsmart all-in-one that I bought a year ago (12/2012). It comes preinstalled with Windows 8.

  System information:

  (a) Intel (r) Core i7 - 3770 S CPU @ 3.10 GHz

  (b) 8192 MB of RAM

  A few weeks after that I had bought the system, I've upgraded to Windows 8 Pro with Media Center that I bought through Microsoft upgrade program.

  Last week (19/10/2013), I saw the option upgrade to Windows 8. 1 in the store and decided to upgrade.

  After a few minutes, I got a prompt asking me to restart the computer, and I did.

  However, I noticed that the screen has turned white, but it restarts not really - I have seen that the hard drive light was still flashing and I waited for about 15 minutes. I know it does not restart because if that were the case I would have seen the HP logo on the screen of the BIOS. A little later, the system entered into mode 'sleep' (at least the light blinked slowly as if it was the sleep). As it was late at night, I decided to leave the system alone and decided to check on it the next morning. The next morning, he was still in mode 'sleep' (as I feared) - when I tried to wake up from her sleep by moving the mouse/hit the return key, he did the exact sounds as if he were to wake up from its sleep (as it always does), but the screen is still blank. The light power button lit up constantly indicating he's awake now.

  At this point, I decided to turn off the system by holding the button for a few seconds. To restart, I saw the HP logo on the BIOS boot screen and the screen went white and nothing came.

  So I decided do a system recovery using my Windows 8 recovery CD and turn off the system with the CD in its niche. This time, the system came and began immediately to restore my OS to a previous version.

  After connecting to the system recovered, I received the following message:

  "Could not update for Windows 8.1.

  Sorry, we could not complete the update Windows 8.1. We have restored the previous version of Windows on this computer.

  0xC1900101 - 0 x 40019.

  I tried to reinstall Windows 8.1 a couple of times after that. Once to disable all non-Microsoft services and disabling all startup programs. Always the same result.

  I have no antivirus software on my other system protection of Microsoft default system software.

  Any help, greatly appreciated.

  Thank you.

  I have disabled active secure boot existing starter and the update worked.  Now we get the error of watermark "secure boot not configured correctly.  But I have re-enabled secure boot and the error disappeared.

• HP ENVY 7640 e All in One spring: printer - printing with locks on them paved preferences

  

  I'm looking for help with my HP ENVY 7640 e-all-in-one printer. I felt the single best face of disorder and I went to the printing preferences and I see there's pad locks on all parameters. So if I select a preference to change it, it does not change, I guess because the pad locks. I don't know how they got there or how to remove it Please HELP!

  Thanks in advance!

  @toni_j

  You could try the following:

  Create your own shortcut / model from the "locked" shortcuts, which are already available.

  See:

  Printing options

  See the Section titled: custom preferences print template

  When you see a post that will help you,

  Who inspires you, gives a cool idea,

  Or you learn something new.

  Click the 'Thumbs Up' on this post.

  My answer-click accept as Solution to help others find answers.

• HP Envy 4500 printer all in one

  My Hp Envy 4500 printer all-in-one lights up not down IT. If I unplug the power cord, then plug it back it then the printer lights for about 14 seconds and then turns off.  Any ideas?

  Open the link: www.hp.com/contacthp/
  Enter your product number or select Auto detection
  Scroll up to "still need help? Fill out the form to select your contact options.
  Scroll down and click on: contact HP options - click Get phone number
  A file number and phone number will be displayed.

• Want to 24-n075na: upgrade to Windows 10 Pro on Envy 24-n075na All-- One PC in

  I tried to upgrade to Windows Pro 10 on the Envy 24 - n075na all-in-One PC of Windows 10 Home. He can't be upgraded.  It seems to go through the process of upgrading shutsdown and restarts and then displays a message that says: it could not be upgraded.

  Any ideas.

  Thank you

  I thought about it. It was mcaffee blocking the upgrade. Remove and the update worked fine!

• HP Envy 7640 e-all-in-one Seri: HP Envy 7640 does not print

  Printer locked up - line said that the printer's paper (not) and it was offline (no). I unplugged, restarted the computer and the printer. Followed all the basic troubleshooting tips and stupidly the suggestion to reset all printers. Big mistake, now zero printers happen when I try to add. The search option does not either. Is it my computer? I don't think so. This is a NEW printer - printer only a dozen or so articles. Help, please!

  Welcome to the HP community @ellumare,

  I read on your desire 7640 does not although you receive an "Out of Paper" error, the printer showed as 'offline' and currently cannot add printer on your Mac with 10.7.

  Here's what I would recommend. Try troubleshooting the equipment first, because if there is a problem with the unit, this will lead to software problems and troubleshooting cycle can get tedious.

  1. power reset the printer and make sure the printer is plugged directly into the wall, avoiding bars power and surge protectors. This ensures that the printer is full on.

  Turn on the printer.
  With the printer, unplug the power cord at the back of the unit.
  Unplug the power cord from the wall outlet.
  Wait at least 15 seconds.
  Plug the power cord into the wall outlet.
  Reconnect the power cord to the back of the unit.
  If the printer does not by itself, press the Power button to turn it on.

  2. try to make a copy of the front of the printer. If the work of copies successfully, go to step 3, if the copies do not work, tell me what happens when you try to make them as there is most likely a hardware problem.

  3. from your Mac:

  1. Reset the printing system
  2. Repair disk permissions
  3. Restart the Mac.
  4. Click on this link to download and install the full features and software driver: HP ENVY 7640 e-all-in-One Printer series full feature software and drivers
  5. Print from text editing and other test applications and also try to scan from HP Scan/HP Utility.

  I hope this helps, and I hope to hear the result!

  Tip: Make sure that the printer is plugged directly into the wall, avoiding bars power and surge protectors. This ensures that the printer is full on.

• HP Envy 4500 e-all-in-one Seri: scanning multipe pages in a document file

  I'm trying to scan multiple pages in a document file. I am currently using Windows 10. What are the steps to do this successfully.

  Hello

  Thank you for using the forum.

  To use the Scan software on your printer, you will need to download and install the printer driver.

  We recommend that you download the full features and it can be found here:

  http://support.HP.com/us-en/drivers/selfservice/HP-envy-4500-e-all-in-one-printer-series/5304875/model/5304876#Z7_3054ICK0K8UDA0AQC11TA930C7

  Once you have installed the software, you can click the icon for the printer on the desktop and it will bring up the HP Printer Wizard and you can use the Scan software.

  You will first need to scan more than one page, select "Save as PDF".

  Once you've scanned the first page, in order to scan several pages, you will need to click on 'Add page' (as shown)

  

  When you are finished, you can save the document.

  Here are several videos giving you good advice on digitization (printers in the videos are using the same software to Scan as your HP Envy 4500)

  Scanning multiple photos:

  HP Officejet Pro 8630

  https://goo.GL/ADYDmo

  Scanning tips:

  HP Officejet Pro 8630

  https://goo.GL/fjZvqM

  HP Deskjet 2540 scanning tips

  https://goo.GL/qfQyf4

  Hope that helps.

  Please click on the "Bravo Thumbs up" If this has helped you and 'Accept as solution' If this helped solved your problem.