HP Envy 360, model 15-U363CL: Synaptics Clickpad setttings works does not properly in Windows 10

Synaptics Clickpad v. 19.0.12.95 settings are not saved after Windows 10.  Every time I have stop and restart Win 10, I have to disable "TAPPING" I hate go in the settings of the mouse/clickpad.  Settings have been saved on close and worked well in Win 8.1.  HP needs to come with a new driver.   In the meantime, I guess I might have to go back to 8.1 win?

Anyone else having this problem?

Software and driver results for:

HP ENVY x 360-15-u363cl (ENERGY STAR)

Synaptics TouchPad Driver 18.1.7.52 Rev.A 188,0 MB 17 July 2015

You must use Win 8.1 driver as driver Win 10 is not available for the touchpad.

Tags: Notebooks

Similar Questions

  • Toshiba Satellite A200 Synaptics Touch pad, scrolling does not work.

    Questions of Toshiba Satellite A200 SKU PSAF6A - 02Q01N Synaptics Touch pad, scrolling does not work.

    Operation system Win7 x 64, re-formatted and updated since Vista x 32, after having teething problems, install the drivers and do everything to work smoothly (for at least 2 months now), I managed. Today out of the blue the scrolling on the touchpad stopped working.

    I read on some forums that do, most said try using CCleaner to uninstall the driver and reinstalling.
    Tried to uninstall and reinstall the driver support Aus > drivers, done this, but received the error, (something) do not recognize the operating system.

    I went to the Synaptics site found a driver that has been recognized, it has installed but not really want to reboot the pc before I get some advice first. As there is a warning about the specific drivers for specific models and manufacturers...

    Help required, please.

    Hello

    Uninstall the existing touchpad driver and install it:

    http://Support1.toshiba-tro.de/Tedd-files2/0/tpdrv-en-20090320132707.zip

    Recently, it has been already discussed on the dysfunction of the touchpad in this thread. But unfortunately it did not help him
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=52689&TSTART=30

  • Jumping cursor, sporadic and touchpad doesn't work does not correctly for HP envy 15

    Hello

    I had my HP ENVY 15 t-q100 CTO Notebook PC in September 2014. It has 8.1, 64-bit Windows. For the first few weeks of use, I don't have any problems. Then, I started having occurrences more problems of cursor/touchpad to the point where it happens all the hours of use (not a problem of external mouse):

    Jump around on the screen (a few millimeters in inches).

    Move per increment on its own without me anywhere near the laptop (usually spazzes left).

    Does not allow scrolling functions / normal touchpad when problems are happening.

    Works as if I am holding down the click button while I try to move it - mostly frustrating when I make the important work.

    At random click things that I try to move it.

    Here's what I tried to do to fix this and did not work:

    Roll back the driver (did not work).

    Update driver (no update available).

    Reset the device (works for a minute or two).

    Reboot (I do it everyday anyway).

    Reduce the speed of the cursor and other mouse options offered online.

    I've seen similar problems for the HP Envy 17 and other laptops, but no real solutions have been proposed. Please help me with this problem.

    In January 2015, I received by mail, a brand new Envy 15 t-q100 purchased HP's official website. Packaging and the laptop is here Mint (aesthetically speaking). That being said, I had the exact symptoms described in this thread since the first day. With a replacing synaptics driver, I was able to stabilize the mouse enough to effectively use the tool 'curve of pressure. " Then, I determined that it was in fact a hardware problem. I noticed that from time to time, the "animation" icon would indicate that pressure is applied even if I wasn't touching the laptop. If I applied pressure by pressing or stirring on the basis of the Palm, would stop the pressure indication and use mouse returns to normal. However, this problem gradually went from bad to worse, and finally the touchpad does not have all together. Firmware and BIOS flashing helped before, but has been either nothing change.  I debated on referring to HP for repairs under warranty, but after having to wait a month to get this unit in the first place, in addition to reading all these horror stories of people coming back a semi destroyed unity and always faced with the same symptoms, I was ready to fight against myself. so, I found a source replacement nine track want pads 'zone of control '. Ninety-nine percent sure that I had a defective keypad, I bought P/N "761210-001" to "parts_direct101" for $59.95 ebay seller. Disassembly, I discovered that one of the screw mount for the pad was loose (this may have contributed to the problem). I decided to replace the pad in any case. Finally. No more glitches. After months of experimentation and reading these forums, I have now a mouse working 100%! It's been more than 2 weeks now, since I replaced the touch pad and still no problems! I use my laptop 3-4 hours per day. I always use the synaptics driver installed replacement from "dpinst.exe" found in the x 64 folder downloaded directly on the website of synaptics 'uncompressed'. I have not tried to update with windows update again. Just happy to finally have a mouse to work on this beast of a machine. I'll keep you all posted if this problem will never return. With regard to the absence being automated support generic responses to "Customer Service" aka HP, I guess HP has accidentally put on a bad batch of caterpillars and they simply cannot 'afford' parts, labour and logistics to issue a notice of recall of this magnitude! Unfortunately, this laptop must be completely disassembled to replace the touchpad. I would NOT recommend this fix if you feel that it is beyond your skill level. Instead, call the HP technical support and insist that you have received a unit with a defective keypad. I hope this helps!

  • HP ENVY dv7t-7200 CTO Quad Edi: dv7t-7200: Microphone is not compatible with Windows 10

    I have upgraded to Windows 10 last night.   When I tried to configure the new Deputy of Cortana listen my mic system could not hear me.  Finally, the Setup process fails and says that my microphone is not compatible.

    All race through this issue?  Someone at - he was able to solve it?

    Mike

    HP ENVY CTO 7200 dv7t Quad Edition Notebook PC

    Product number: B6B75AV

    window press the key and the x key at the same time to bring up a list go to control panel select sounds

    under the recording tab {if you have built in webcam there is a microphone next to it}

    choose right headphone click Choose set the default device

    Click on start then stettings then choose the Date and the word

    left side of windows, select speech then Middle bottom of page under click Microphone start calibration

    with mine I can't be to far away from the microphone, but once it calibrates it should work... window 10 messed up my audio so

  • Spectrum HP 360: new spectrum HP win10 and scrolling touchpad does not work!

    Can someone help me please? I need scrolling options and does not work. Anyone know what this could be?

    Thank you very much

    Concerning

    Hello

    You are welcome

    Download and install the Synaptics software on the link below.

    http://ftp.HP.com/pub/SoftPaq/sp72501-73000/sp72919.exe

    When the installation is complete, restart the laptop.

    Kind regards

    DP - K

  • spectrum of HP x 360: another device/Sound Card does not properly

    My card failed bodyguard. I can restart my computer and it works perfectly for a random duration. But usually I'll run youtube or soundcloud and the audio will just stop. The video will stop and play more.

    I try video files on my computer and they will not play on Windows Media Player. I try it in VLC and the video will play, but not the audio.

    I tried all drivers known to the process of the HP driver update, I tried to update the Intel Bios Chip, everything.

    I'm out of options. Can you help me?

    Hello:

    You need this driver for the unknown device and you may have to install manually by navigating to the folder of the driver.

    http://ftp.HP.com/pub/SoftPaq/sp66001-66500/sp66231.exe

    The only suggestion I can offer for the audio, it's if your model is equipped with the system audio Realtek HD accept the agreement, download and install the second driver on the list.

    http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=24&PFID=24&level=4&Conn=3&DownTypeID=3&GETDOWN=false

  • HP 1287c Windows 7: windows 7, try to use the model of hp 1287c hp 5302 keyboard does not

    have a hp 1287c windows 7 tries to use the model of hp 5302 keyboard does not respond

    try to use the old Hp keyboard model 5302 was for windows 2000 did not know if could use when I plug computor does not recognize he wonding if possible to work?

    45fmj

    Hello

    Well, the keyboard is now very cheap, the converter may not work correctly. After 16 years of him please give a rest.

    Kind regards.

  • HP Envy, Windows 8 slow, late and does work does not correctly

    Hello

    First off let me give a run down of my installation:

    -HP Envy Dv7, (about one and a half years)

    -Windows 8.1 (I upgraded windows form 8)

    -HDD 750 GB (Stock)

    -Everything else is stock based on the computer

    So, my trouble started about 3 months after what appeared to be a routine stop after a day use.  The next time I started my computer took a lot more time to start, I got an error that talked about my control center catalyst having an error and does not and that nothing would be open to all.  After the merger with different ideas on how to solve the problem, I dropped and it factory reset.  This fix has worked for the whole two days were once again, I got the same problems, I did another reset and when it does not work I gave up for a while.  About two weeks ago, I again have to reset it and then updated for windows 8.1through microsoft dreamspark.  This seemed to fix my kind of problem, the same questions (not counting control catalyst who never returned after the update) would be upward if I have it plugged anything in the USB drivers.  Now for some unknown reason which was not the case for my wireless mouse which worked just fine.  If at this point, I have a mouse plugged wireless and no problem whatsoever.  One day I shut down my computer with the mouse is always plugged (I never do usually) after I do all my troubles to come back but enlarged.  I tried to do just a refresh of windows but it says that my hard drive is locked and let be honest I really want to keep refreshing and resetting my laptop and lost al my stuff.

    So now, here's a list of my exact problems in most occuences recentof, now:

    -Slow start and typing in my password take like five minutes to register that I typed in fact anything

    -l' unlock screen is for like five minutes

    -My Office take a good ten mintues to load all my icons and others

    -J' have a popup that says IEWebsitelogon, not having that take a long time to close

    -EACH window is delay, that is difficult to change their size, move about minimize, close, etc...

    -Every thing take > then five minutes for open including Manager, start menu task

    -Much more delay and related issues

    What is one thing to hard drive? They are not too expensive to replace, so I can get another copy of the win8 form my school so if that is the question that is very well.

    I really need help, my computer is basically usless, I am a student I need my computer please help me.

    Hello

    As you probably know, the error code 24 characters for short drive Self Test (DST) would indicate that hard is defective and must be replaced.  It is also entirely consistent with the problems of performance, as you describe in your initial post.

    If there is no help, the player at the link below is an example of one that would be perfect for your laptop.

    750 GB hard drive for laptop.

    The procedure to replace the hard drive begins on Page 56 of your & Maintenance Guide.

    Kind regards

    DP - K

  • Compaq Presario CQ71 Ser: CNF01002QT model CQ71-4142F - Dead - no power supply - does not start - no led

    Hello *. *

    First time here...

    Compaq Presario Notebook Win7 32-bit - 4 GB DDR2, aged about 3 years?

    A customer brought this with virus / malware issues - arranged.

    On start-up, the bios made regular account that the HP OEM battery must renew. Not difficult technical question here.

    Powered on the laptop without the battery and the pc has stopped completely after a few seconds.  No beeps, no LED. Suspecting power, the original showed 19.* * volts. Ok.

    Bidirectional p - s for another check the jack plug connection. No change, tried jumping jack plug connection.

    Out two-way RAM for good, no change.
    Two-way 2032 battery of the bios for good, not change.
    Removed HARD drive, no change.

    Non-powered from DC or battery, depressed and button who was held for at least a minute, without change.

    The bios battery removed for 30 minutes, without change.

    Fan do not get stuck.

    No attached devices.

    Remarkable:

    Without battery : white DC power LED stays on for about 5 seconds. And then off.

    Old battery included: white DC power LED does not illuminate.

    I did not remove the optical drive, because I think it's ok. Works fine (or used to).

    I am familiar with this series of Presario laptops / laptops and while I have tried everything I know, I was wondering if, before I have conviction as having a short-circuit motherboard / failure, is there anything else I can try with this model of HP laptop before I am progressing with the send for repair of component.

    Thanks in advance

    Nick

    Freelance technician PC technical support

    Compaq Presario CQ71 CNF01002QT / WR067EA #ABF model CQ71-4142F - Dead - no power - no Boot - no led

    With everything else has been tried, it does seem to be a hardware problem at the moment. It is more than likely isolated pay-per-view system, based on the symptoms. I'm sorry.

  • ENVY of HP dv6-7300ex Notebook PC: Wi - Fi does not work on battery mode

    Hello

    Good evening everyone,

    I have a problem with connecting Internet using Wi - Fi connection. When I use the battery mode, the internet connection does not work. However, when I plug the cable into electricity, it works very well without any problems. The computer shows me that I am connected to WiFi but when I try to go to some Web sites, it does not work.

    The original operating system is windows 8 and now I've upgraded to windows 10. However, the problems is not in the two operating systems.

    Thank you very much.

    Hello

    Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!

    I stumbled upon your post on the laptop and wanted to help you! I looked in your question about your computer problems with WiFi and laptop dv6-7300ex of HP ENVY staying on when the battery mode. Here is a link that shows you how to change options in Figure 19 of the link allowing the hybrid sleep.

    It shows the battery options and you can check what power plan options on this moment, you are. Balanced is always recommended with laptops.

    You can try to use the Windows Update Troubleshooter to fix updates that do not come through Windows 10.  Please restart the laptop twice to make sure that all updates are completed!

    I hope this helps.

    Thank you.

  • Model bag Clickfree Automatic Backup Device HD325 does not work in the Windows XP computer.

    Original title: BAG Clickfree Automatic Backup Device model HD325

    Cannot use the automatic backup device model Clickfree BAG HD325 on Windows XP.  It's a plug-and-play device.

    I tried to pass by and update the driver, but the wizard tells me there are no newer drivers available, and when I try to restore the driver tells me that there is no previous driver.  The USB port works properly and is the reading device.  I also tried to uninstall and reinstall the driver by using Device Manager, and the camera will not work properly.  The taskbar has said it malfunctioned, impossible to install correctly. and won't work properly, but after fiddling around by using the methods mentioned above, it says now that it is installed and ready to use, but the program does not start automatically.  I've been through to try to start the program manually, but it is not listed in the start menu or desktop.
    I also tried to add material using add new hardware, but it's not listed there either.
    I was able to use this program in the past, why I am no longer able to use this device?

    Hello

    You are able to use any other USB device on your computer?

    You can follow this link & check if the problem persists:

    USB port may stop working after you remove or insert a USB device

    Hope the helps of information.

  • XML with a member does not properly in the data model

    I use XmlDataAccess class to load an XML list in GroupDataModel. Everything works fine if the XML file has more than one Member, however, it does not load if the list contains a single member. I use the following code to get the XML content:

    QVariant list = xda.load(home.absoluteFilePath("MembersList.xml"),"/members/member");
    

    I need to know if the list has only one or 2 + members, so I can direct the data model to load with the appropriate settings. Can I know the number of members in the list?

    This problem is closely related to this question, where a solution QML is given.

    Hi Mitch99,

    Please see this forum post for a workaround for this problem. I tested it and confirm that it works as with QML.

  • Synaptics does not properly.

    Hey support them,

    I have a G1 640 Probook and the touchpad does not work perfectly. Basically turn it on and turn off the feature does not work. Installing the synaptics driver, I get an error and it installs only partially (SbmDrv installed, cannot install SynTP).

    Everything works (keyboard and touchpad) except this feature (double tapping to disable the touchpad).

    I read on a few discussions that Fn + space is the same, but it is not always disable the touchpad.

    Appreciate any response.

    Paul

    We managed to solve this problem.

    Microsoft Security essentials has been marking the installer as a Trojan horse. Disable the antivirus protection allow us to install the driver correctly.

  • Synaptics touchpad p/s does not

    My DV7-1150US... Home premium, 64-bit Edition... touchpad not working do not at all. Even uninstalled driver download from HP. Installed from Synaptics.com also not working. I have to use the external wireless mouse. Very unconvient Laptop.Any driver for staring at me.

    TX...

    : Thanks for your respone to my touchpad problem does not. I checked the manual requiring 2 parts to replace the touchpad. Look like it's not easy to do it yourself. I called HP and they told me $398 to load and send it in trouble. They are crazy and a lot of BS. I could go looking for Acer laptop new with that money instead of fixing this junk. I will never buy HP again. Because I see that you are too busy every day to help us on this forum Post now. Anyone have too much stress to deal with all this... I will continue to use the external mouse until she died... A thousand thanks to you and all the guys from this genius...

  • Model of resizing by using shift + alt does not work

    Hi all

    I have training in CS6 Adobe® Illustrator® class in a book and in Chapter 6, it is a sectoion on creating templates.

    I use Illustrator CS6 on Windows 7 64 bit.

    The instructions are:

    Select the Selection tool and, by pressing the keys Shift + Alt (Windows) or the keys shift + Option (Mac OS), do drag the high limit point of the rectangle selected downwards until the width and height are about 30 pt.

    However, no matter what I try I can't achieve this goal.

    When I press SHIFT + alt and head upward point limit, the icon changes to an arrow plus a beautiful place but everything what is the entire model. It does not resize as ssays example.

    Anyone have any ideas why?

    Kind regards

    Martin Kozma

    You have the visible bounding box? Display > display the bounding box.

Maybe you are looking for

  • 2015 Macbook Air - download speed between 3 Mbps and 100 kbps avg.

    I have a 2 month old Macbook Air El Capitan 10.11.6 running 2015. Since the day I opened the box and connected to the internet, I saw really slow to the Internet until I gave up on streaming audio and video. Connectivity is so bad that pictures on we

  • How to change the language settings in firefox using JavaScript

    My question is: how to change the language settings in the use of JavaScript in firefox: I want to set the value of intl.accept_languages en using JavaScript. How can I do? EDIT: The reason mail, I want to do is to be able to run selenium for differe

  • Battery for acer aspire one AO 725-0687

    What is the battery last? Is there a capacity extended battery?

  • Removal of a dead Smart Wi - Fi router

    Hello! I need help... I just replaced my Cisco EA6500 router, because he finally died, I replaced it with an EA8500, I kept the same name of the previous router wireless network, but today, WiFi Smart shows two networks with the same name - a online

  • My Ethernet drivers / wireless have missing/broken

    Hello, my computer (Windows 7) partially stopped working, my driver for my wireless disappeared for about half a year now entire wireless driver disappeared and now my Ethernet stopped working with the message "registry files are missing or corrupt"